Transition-metal-free synthesis of arylboronates via thermal generation of aryl radicals from triarylbismuthines in air

• Yuki Yamamoto,
• Yuki Konakazawa,
• Kohsuke Fujiwara and
• Akiya Ogawa

Beilstein J. Org. Chem. 2024, 20, 2577–2584, doi:10.3762/bjoc.20.216

• with halogen or triflate groups. Recently, transition-metal-catalyzed direct borylation of arenes via C–H bond activation has been reported, although the design of the substrate and ligands is somewhat complicated [16][17][18][19][20][21][22]. Since the complete removal of catalyst-derived metal

Mono or double Pd-catalyzed C–H bond functionalization for the annulative π-extension of 1,8-dibromonaphthalene: a one pot access to fluoranthene derivatives

• Nahed Ketata,
• Linhao Liu,
• Ridha Ben Salem and
• Henri Doucet

Beilstein J. Org. Chem. 2024, 20, 427–435, doi:10.3762/bjoc.20.37

• palladium-catalyzed direct intermolecular arylation, followed by a direct intramolecular arylation step. As the C–H bond activation of several benzene derivatives remains very challenging, the preparation of fluoranthenes from 1,8-dibromonaphthalene via Suzuki coupling followed by intramolecular C–H

• reported [39][40]. The synthesis of fluoranthenes from 1,8-dibromonaphthalene via a double C–H bond activation of the arene used as coupling partner remains limited to specific arenes featuring an activated C–H bond. Consequently, we also investigated the access to fluoranthenes from 1,8-dibromonaphthalene

• , carbonyl or nitrile. Using the appropriate arenes, this synthetic route enables the desired functional groups to be introduced at positions 7 to 10 of fluoranthenes. The second method involves a Suzuki coupling followed by an intramolecular C–H bond activation step, and provides access to specific

Lewis acid-promoted direct synthesis of isoxazole derivatives

• Dengxu Qiu,
• Chenhui Jiang,
• Pan Gao and
• Yu Yuan

Beilstein J. Org. Chem. 2023, 19, 1562–1567, doi:10.3762/bjoc.19.113

• the Lewis acid to realize the sp3 C–H-bond activation of nitrogen heterocycles to synthesize isoxazole derivatives. Results and Discussion At the outset of this study, we chose the reaction of 2-methylquinoline (2a) with phenylacetylene (1a) in the presence of AlCl3 (3 equiv) and sodium nitrite (10

• oxide E [23], which can be converted to the desired isoxazole with 1a through a 1,3-dipolar cycloaddition. Conclusion In conclusion, we have developed an efficient and concise synthesis of isoxazole nitrogen heterocycles by direct C–H-bond activation of methyl heteroaromatics. The method avoids using

Non-noble metal-catalyzed cross-dehydrogenation coupling (CDC) involving ether α-C(sp³)–H to construct C–C bonds

• Hui Yu and
• Feng Xu

Beilstein J. Org. Chem. 2023, 19, 1259–1288, doi:10.3762/bjoc.19.94

• overcome the shortcomings of the above coupling reactions, organic chemists have envisaged the construction of C–C bonds directly through C–H bond activation [5]. Fortunately, scientists have used various transition metals as catalysts to realize the activation of various types of C–H bonds, and have

Pyridine C(sp²)–H bond functionalization under transition-metal and rare earth metal catalysis

• Haritha Sindhe,
• Malladi Mounika Reddy,
• Karthikeyan Rajkumar,
• Akshay Kamble,
• Amardeep Singh,
• Anand Kumar and
• Satyasheel Sharma

Beilstein J. Org. Chem. 2023, 19, 820–863, doi:10.3762/bjoc.19.62

• also found to have a higher catalytic activity for the ortho-alkylation of pyridines with styrenes to give the linear alkylated products (5b,c, Scheme 2). Further, the authors proposed that the C–H bond activation could be the rate limiting step based on kinetic isotope experiments (KIE). The proposed

Enolates ambushed – asymmetric tandem conjugate addition and subsequent enolate trapping with conventional and less traditional electrophiles

• Péter Kisszékelyi and
• Radovan Šebesta

Beilstein J. Org. Chem. 2023, 19, 593–634, doi:10.3762/bjoc.19.44

Transition-metal-catalyzed C–H bond activation as a sustainable strategy for the synthesis of fluorinated molecules: an overview

• Louis Monsigny,
• Floriane Doche and
• Tatiana Besset

Beilstein J. Org. Chem. 2023, 19, 448–473, doi:10.3762/bjoc.19.35

• functionalization of C(sp2) and C(sp3) centers with SCF3, SeCF3, or OCH2CF3 groups among others, by C–H bond activation. The scope and limitations of these transformations are discussed in this review. Keywords: C–H bond activation; emergent fluorinated groups; homogeneous catalysis; organofluorine chemistry

• retrosynthetic disconnections. In this context, a strong interest from the scientific community was shown towards the challenging synthesis of fluorinated molecules by transition-metal-catalyzed C–H bond activation [44][45][46][47][48][49][50], allowing the functionalization of complex molecules and even for

• (e.g., SCF3, SeCF3, SCF2CO2Et, OCH2CF3) by transition-metal-catalyzed C–H bond activation (Scheme 1). The review will be organized in two main parts, dedicated to the construction of a C–SCF2R/SeCF3 and C–OCH2CF3 bond. This review does not aim to be exhaustive and key examples were carefully chosen to

Functionalization of imidazole N-oxide: a recent discovery in organic transformations

• Koustav Singha,
• Imran Habib and
• Mossaraf Hossain

Beilstein J. Org. Chem. 2022, 18, 1575–1588, doi:10.3762/bjoc.18.168

• review paper exploring several procedures of C–H bond activation for the functionalization of N-oxides [12] and in 2019, Dongli Li and co-workers analyzed heterocyclic N-oxides with regard to their usefulness in synthesis of organic drug molecules and catalysis [13]. Many review papers have been

Mechanochemical halogenation of unsymmetrically substituted azobenzenes

• Dajana Barišić,
• Mario Pajić,
• Ivan Halasz,
• Darko Babić and
• Manda Ćurić

Beilstein J. Org. Chem. 2022, 18, 680–687, doi:10.3762/bjoc.18.69

• dynamics of the formation of cyclopalladated intermediates In-I, LAG reactions of Pd(OAc)2 with L6–8 and TsOH were performed using 25 µL of MeCN as a liquid additive in a molar ratio of 1:1:1 (Ln/Pd(OAc)2/TsOH). In situ Raman monitoring of C–H bond activation was possible for L6 and L7, while in the case

Site-selective reactions mediated by molecular containers

• Rui Wang and
• Yang Yu

Beilstein J. Org. Chem. 2022, 18, 309–324, doi:10.3762/bjoc.18.35

• , directing groups are introduced to the substrates covalently to achieve site-selective C–H bond activation, which prospered greatly in the past decades [7][8][9]. Template regulation is also introduced to locate reactive centers in a noncovalent way through hydrogen bonding [10][11][12]. Even though

Recent advances in the syntheses of anthracene derivatives

• Giovanni S. Baviera and
• Paulo M. Donate

Beilstein J. Org. Chem. 2021, 17, 2028–2050, doi:10.3762/bjoc.17.131

• by treatment with PCC/Celite in dichloromethane (DCM). Finally, treatment with a catalytic amount of CF3SO3H provided the corresponding anthracenes 30a–c in good yields (57–75%) [40]. Metal-catalyzed C–H bond activation In 2016, Hong’s group developed a synthetic strategy to generate substituted

• converted to the substituted anthracenes 109 and 110 by varying the acidic workup procedures. In addition, they prepared 9-chloro-10-phenylanthracene (112) in good yield (87%) through diol 111 [59]. Synthesis of substituted benzo[a]anthracene and dibenzoanthracene derivatives Metal-catalyzed C–H bond

• activation In 2009, Liang et al. reported an efficient and highly regioselective route to construct substituted tetracyclic benz[a]anthracene derivatives 115 (Scheme 26) [60]. For this purpose, the authors developed an efficient palladium-catalyzed tandem C–H activation/bis-cyclization reaction of

On the application of 3d metals for C–H activation toward bioactive compounds: The key step for the synthesis of silver bullets

• Renato L. Carvalho,
• Amanda S. de Miranda,
• Mateus P. Nunes,
• Roberto S. Gomes,
• Guilherme A. M. Jardim and
• Eufrânio N. da Silva Júnior

Beilstein J. Org. Chem. 2021, 17, 1849–1938, doi:10.3762/bjoc.17.126

• synthetic methodologies is the C–H bond activation process that enables a straightforward access to several important and innovative compounds [14][15][16][17][18]. In the last few years, metals such as ruthenium [19][20][21], rhodium [22][23][24], palladium [25][26][27], and iridium [28][29][30] have been

• widely applied as catalysts for this matter, including in the synthesis of bioactive substances. Although catalysts based on these metals, are known to be efficient in C–H bond activation reactions affording the products in good yields and mild conditions, they are also known to be usually expensive

A recent overview on the synthesis of 1,4,5-trisubstituted 1,2,3-triazoles

• Pezhman Shiri,
• Ali Mohammad Amani and
• Thomas Mayer-Gall

Beilstein J. Org. Chem. 2021, 17, 1600–1628, doi:10.3762/bjoc.17.114

• . Later, carboxylate-ligand-assisted C–H bond activation takes place through a concerted metalation–deprotonation transformation to produce the next intermediate. Finally, the corresponding product 142 is formed by a reductive elimination process, along with the regeneration of the active catalytic

• '. The isocyanide is inserted into intermediate 158' to achieve intermediate 159'. A 1,2,3-triazole C–H bond activation occurs using palladium, which subsequently undergoes a reductive elimination process to afford final product 154. Likewise, the Pd(0) species is reformed for the next cycle [64]. The

Prins cyclization-mediated stereoselective synthesis of tetrahydropyrans and dihydropyrans: an inspection of twenty years

• Asha Budakoti,
• Pradip Kumar Mondal,
• Prachi Verma and
• Jagadish Khamrai

Beilstein J. Org. Chem. 2021, 17, 932–963, doi:10.3762/bjoc.17.77

• enantioselectivity varied with the polarity of the solvent. The optimization study disclosed that the enantioselectivity increases with the decrease of the polarity of the solvent (Scheme 68). Yu and co-workers reported a novel segment-coupling Prins cyclization involving sequential benzylic/allylic C–H bond

• activation via DDQ oxidation, followed by nucleophilic attack of an unactivated olefin to obtain all-cis-trisubstituted Prins products with high stereochemical precision [111]. A single-electron transfer (SET) mechanism was proposed for the above transformation (Scheme 69). A SET from an arene or alkene to

Photosensitized direct C–H fluorination and trifluoromethylation in organic synthesis

• Shahboz Yakubov and
• Joshua P. Barham

Beilstein J. Org. Chem. 2020, 16, 2151–2192, doi:10.3762/bjoc.16.183

• catalysis and photochemistry. Where transition metal catalysis provides one strategy for C–H bond activation, transition-metal-free photochemical C–H fluorination can provide a complementary selectivity via a radical mechanism that proceeds under milder conditions than thermal radical activation methods

When metal-catalyzed C–H functionalization meets visible-light photocatalysis

• Lucas Guillemard and
• Joanna Wencel-Delord

Beilstein J. Org. Chem. 2020, 16, 1754–1804, doi:10.3762/bjoc.16.147

• last decade particular attention has been focused on two modern fields, C–H bond activation, and visible-light-induced photocatalysis. Couplings through C–H bond activation involve the use of non-prefunctionalized substrates that are directly converted into more complex molecules, without the need of a

• , isolated in moderate to good yields. A possible gram scale-up synthesis was also accomplished. Within the mechanistic cycle, after initial vinylic C–H bond activation and insertion of CO into the C–Pd bond, the acylpalladium intermediate is converted into its conjugated analog under DABCO assistance

• these two activation modes. The advantages of the dual catalytic systems over traditional monocatalyzed approaches is also discussed, thus illustrating their sustainable character. Review Visible-light-mediated photocatalysis as a sustainable reoxidation strategy In the context of traditional C–H bond

In silico rationalisation of selectivity and reactivity in Pd-catalysed C–H activation reactions

• Liwei Cao,
• Mikhail Kabeshov,
• Steven V. Ley and
• Alexei A. Lapkin

Beilstein J. Org. Chem. 2020, 16, 1465–1475, doi:10.3762/bjoc.16.122

• : https://github.com/sustainable-processes/Pd-catalysed_C-H_activation_reaction_prediction. Results and Discussion Computational approach to rationalise reactivity in Pd-catalysed C–H bond activation reactions Chemical reactivity is simultaneously influenced by many factors including catalysts, reactants

Synthesis of esters of diaminotruxillic bis-amino acids by Pd-mediated photocycloaddition of analogs of the Kaede protein chromophore

• Esteban P. Urriolabeitia,
• Pablo Sánchez,
• Alexandra Pop,
• Cristian Silvestru,
• Eduardo Laga,
• Ana I. Jiménez and
• Carlos Cativiela

Beilstein J. Org. Chem. 2020, 16, 1111–1123, doi:10.3762/bjoc.16.98

• literature [52][53][54][55][56][57][58][59]. The styryl fragment bonded to an oxazolone ring has not been characterized previously by X-ray methods, but it shows internal bond distances and angles similar to those found in related 2-styrylimidazolone species [60]. C–H Bond activation processes on (Z)-4

• ], did not produce the expected cyclobutanes or gave only very low conversions (<5%) after long reaction times (96 h). As this reactivity was poor, it was decided to attempt the reaction using Pd complexes as templates [28][29][30]. The first step in this process was to study the C–H bond activation in

• factors, namely the presence of bulky CF3 and NO2 groups in ortho positions of the starting oxazolones 2e and 2i, and the strongly deactivating effect of the two groups on the C–H bond activation process. The reactions were usually carried out using 0.6 mmol of the starting material 2. In this respect, it

Bipyrrole boomerangs via Pd-mediated tandem cyclization–oxygenation. Controlling reaction selectivity and electronic properties

• Liliia Moshniaha,
• Marika Żyła-Karwowska,
• Joanna Cybińska,
• Piotr J. Chmielewski,
• Ludovic Favereau and
• Marcin Stępień

Beilstein J. Org. Chem. 2020, 16, 895–903, doi:10.3762/bjoc.16.81

• measurements show that helicene-like boomerangs may be usable as circularly polarized luminescent materials. Keywords: donor–acceptor systems; double C–H bond activation; helicenes; pyrroles; Introduction Nanographenes and other polycyclic aromatics as well as their heterocyclic analogues are typically

• disadvantage may be obviated by transition-metal-mediated double C–H bond activation [22][23], which is functionally equivalent to conventional oxidative coupling reactions, and has become a powerful synthetic tool with a rapidly growing scope of use [24][25][26]. However, in the field of π-conjugated

• (NDA) and naphthalenemonoimide (NMI) moieties. The double C–H bond activation initially used palladium(II) acetate in acetic acid as the coupling system. The subsequent screening revealed, however, that a catalytic coupling could be also achieved in the presence of silver(I) carbonate as the

Synthesis of C₇₀-fragment buckybowls bearing alkoxy substituents

• Yumi Yakiyama,
• Shota Hishikawa and
• Hidehiro Sakurai

Beilstein J. Org. Chem. 2020, 16, 681–690, doi:10.3762/bjoc.16.66

• equilibrium between the Pd(IV) intermediates through C–H bond activation. Keywords: buckybowl; C70; rearrangement through C–H bond activation; Introduction The study of buckybowls, the bowl-shaped π-conjugated aromatic hydrocarbons corresponding to the fragments of fullerenes, pioneered by the works on

• succeeded in synthesizing three different alkoxy-substituted C70-fragment buckybowls 5a–c. In particular, 5c was not an intended molecule, but was formed unexpectedly through the rearrangement through the Pd-catalyzed C–H bond activation reaction. The X-ray crystal structure analysis of 5a–c clearly

Architecture and synthesis of P,N-heterocyclic phosphine ligands

• Wisdom A. Munzeiwa,
• Bernard Omondi and
• Vincent O. Nyamori

Beilstein J. Org. Chem. 2020, 16, 362–383, doi:10.3762/bjoc.16.35

• from α-C–H bond activation in heterocycles The α-position to a heteroatom in a cyclic compound is activated because of the difference in electronegativity with carbon. This presents an opportunity to readily generate organometallic nucleophiles. Chelucci et al. [71] used this fact to synthesize the

Recent advances in transition-metal-catalyzed incorporation of fluorine-containing groups

• Xiaowei Li,
• Xiaolin Shi,
• Xiangqian Li and
• Dayong Shi

Beilstein J. Org. Chem. 2019, 15, 2213–2270, doi:10.3762/bjoc.15.218

• intermediate B through the C–H bond-activation process. Oxidative addition of the intermediate B with Selectfluor affords the palladium(IV) species C, followed by reductive elimination and ligand dissociation to give the final product. Similar to these publications in strategy and products, in the same year

• process, an in situ-generated cationic [Pd(NO3)]+ species facilitates the C–H bond activation to give intermediate A. The Pd(II)(1a)2 complex B is formed via further C–H bond activation of another molecule 1a by the cyclopalladation(II) intermediate A. Then, intermediate B undergoes oxidative addition by

Regioselective Pd-catalyzed direct C1- and C2-arylations of lilolidine for the access to 5,6-dihydropyrrolo[3,2,1-ij]quinoline derivatives

• Hai-Yun Huang,
• Haoran Li,
• Thierry Roisnel,
• Jean-François Soulé and
• Henri Doucet

Beilstein J. Org. Chem. 2019, 15, 2069–2075, doi:10.3762/bjoc.15.204

• methodology provides a straightforward access to several lilolidine derivatives from commercially available compounds via one, two or three C–H bond functionalization steps allowing to tune their biological properties. Keywords: catalysis: C–C bond formation; C–H bond activation; lilolidine; palladium

Attempted synthesis of a meta-metalated calix[4]arene

• Christopher D. Jurisch and
• Gareth E. Arnott

Beilstein J. Org. Chem. 2019, 15, 1996–2002, doi:10.3762/bjoc.15.195

• ) and rhodium(III) complexes underwent spontaneous, chemoselective cyclometalation via C–H bond activation of the N-bound phenyl group (see Figure 2) [19]. Incorporation of a mesoionic carbene directing group onto the upper rim of a calix[4]arene therefore offered potential for a new route to calix[4

Recent advances on the transition-metal-catalyzed synthesis of imidazopyridines: an updated coverage

• Gagandeep Kour Reen,
• Ashok Kumar and
• Pratibha Sharma

Beilstein J. Org. Chem. 2019, 15, 1612–1704, doi:10.3762/bjoc.15.165

• high level of functional group compatibility, intramolecular alkylations, inter and intramolecular C–H bond activation and regio/stereoselective homocoupling of alkynes [71][72][73]. Group of Cho and Chang have unprecedentedly reported a Rh catalytic system for facile addition of heteroarenes to both

• ). However, the reaction was unsuccessful with aliphatic and low-boiling aldehydes (as the reaction was taking place at high temperature). The reaction mechanism involved a Cu-NPs-mediated C–H bond activation of the alkyne which further reacted with the iminium ion to form propargylamine 45 and Cu NPs were