Chemical syntheses and salient features of azulene-containing homo- and copolymers

• Vijayendra S. Shetti

Beilstein J. Org. Chem. 2021, 17, 2164–2185, doi:10.3762/bjoc.17.139

• polyazulene 3 or 3’ was soluble in various organic solvents such as toluene, dichloromethane, tetrahydrofuran (THF), and N,N’-dimethylformamide (DMF). The ‘true polyazulene’ exhibited the conductivity of 5.38 × 10−8 S/cm, which was increased to 8.16 × 10−3 S/cm upon exposure to iodine atmosphere, presumably

Regioselective N-alkylation of the 1H-indazole scaffold; ring substituent and N-alkylating reagent effects on regioisomeric distribution

• Ryan M. Alam and
• John J. Keating

Beilstein J. Org. Chem. 2021, 17, 1939–1951, doi:10.3762/bjoc.17.127

• effect of varying these reaction parameters, using n-pentyl bromide as the prototypical N-alkylating reagent (Table 1). Early investigations revealed that the combination of cesium carbonate (Cs2CO3) in dimethylformamide (DMF) at room temperature (≈ 20 °C) afforded a mixture of N-1 and N-2 regioisomers

Beyond ribose and phosphate: Selected nucleic acid modifications for structure–function investigations and therapeutic applications

• Christopher Liczner,
• Kieran Duke,
• Gabrielle Juneau,
• Martin Egli and
• Christopher J. Wilds

Beilstein J. Org. Chem. 2021, 17, 908–931, doi:10.3762/bjoc.17.76

• mixture of triethylammonium bicarbonate (TEAB) and N,N-dimethylformamide (DMF) followed by a sodium borohydride reduction to give the 4'-alkoxy products [202]. The 4'-methoxy-2'-deoxynucleosides exhibited high resistance towards depurination under acidic conditions [202]. In contrast, nucleosides that are

β-Lactamase inhibition profile of new amidine-substituted diazabicyclooctanes

• Zafar Iqbal,
• Lijuan Zhai,
• Yuanyu Gao,
• Dong Tang,
• Xueqin Ma,
• Jinbo Ji,
• Jian Sun,
• Jingwen Ji,
• Yuanbai Liu,
• Rui Jiang,
• Yangxiu Mu,
• Lili He,
• Haikang Yang and
• Zhixiang Yang

Beilstein J. Org. Chem. 2021, 17, 711–718, doi:10.3762/bjoc.17.60

• of S:R isomers = 6:1). The synthesis of intermediate 2 started from the hydrogenation of 7 by following a previously described method using N,N-dimethylformamide (DMF)/CH2Cl2 [23] as solvent led to a low yield in our hands. Therefore, we planned to switch the solvent from DMF to EtOAc whereupon the

Synthesis of (Z)-3-[amino(phenyl)methylidene]-1,3-dihydro-2H-indol-2-ones using an Eschenmoser coupling reaction

• Lukáš Marek,
• Lukáš Kolman,
• Jiří Váňa,
• Jan Svoboda and
• Jiří Hanusek

Beilstein J. Org. Chem. 2021, 17, 527–539, doi:10.3762/bjoc.17.47

• methanol) such an increase of acidity should be also distinct but it is known that polar protic solvents much better solvate anions and thus decrease their nucleophilicity. Therefore, dimethylformamide has been chosen as the best solvent. Indeed, when dimethylformamide (DMF) was used as the solvent for the

Synthesis and physicochemical evaluation of fluorinated lipopeptide precursors of ligands for microbubble targeting

• Masayori Hagimori,
• Estefanía E. Mendoza-Ortega and
• Marie Pierre Krafft

Beilstein J. Org. Chem. 2021, 17, 511–518, doi:10.3762/bjoc.17.45

• fluorine–fluorine interactions. Experimental Materials. We purchased Fmoc-protected amino acids, N,N-dimethylformamide (DMF), dichloromethane (DCM), methanol, 1-hydroxybenzotriazole (HOBT), 2-(1H-benzotriazole-1-yl)-1,1,3,3-tetramethyluronium hexafluorophosphate (HBTU), N,N-diisopropylethylamine (DIPEA

Synthesis of trifluoromethyl ketones by nucleophilic trifluoromethylation of esters under a fluoroform/KHMDS/triglyme system

• Yamato Fujihira,
• Yumeng Liang,
• Makoto Ono,
• Kazuki Hirano,
• Takumi Kagawa and
• Norio Shibata

Beilstein J. Org. Chem. 2021, 17, 431–438, doi:10.3762/bjoc.17.39

• highly stable fluoride salts (MF), the breakdown of CF3− into difluorocarbene in the presence of alkali (M+) and other metal cations is favored. In earlier studies, the solvent N,N-dimethylformamide (DMF), was essential for nucleophilic trifluoromethylation by HCF3 since DMF acts as a CF3 anion reservoir

Helicene synthesis by Brønsted acid-catalyzed cycloaromatization in HFIP [(CF₃)₂CHOH]

• Takeshi Fujita,
• Noriaki Shoji,
• Nao Yoshikawa and
• Junji Ichikawa

Beilstein J. Org. Chem. 2021, 17, 396–403, doi:10.3762/bjoc.17.35

• -Dimethylformamide (DMF) was purified by a solvent-purification system (GlassContour) equipped with columns of activated alumina and supported-copper catalyst (Q-5) before use. 1,1,1,3,3,3-Hexafluoropropan-2-ol (HFIP) was distilled from molecular sieves 4 Å and stored over activated molecular sieves 4 Å. 1,4-Dioxane

Thermodynamic and electrochemical study of tailor-made crown ethers for redox-switchable (pseudo)rotaxanes

• Henrik Hupatz,
• Marius Gaedke,
• Hendrik V. Schröder,
• Julia Beerhues,
• Arto Valkonen,
• Fabian Klautzsch,
• Sebastian Müller,
• Felix Witte,
• Kari Rissanen,
• Biprajit Sarkar and
• Christoph A. Schalley

Beilstein J. Org. Chem. 2020, 16, 2576–2588, doi:10.3762/bjoc.16.209

• with a typical π-stacking distance of 3.58 Å and a tilt angle of 5.8°. The free electron pair of the tertiary amine points towards the inside of the crown ether. In contrast, single crystals of NDIC8 (Figure 2c), obtained by slow evaporation of a concentrated dimethylformamide (DMF) solution, exhibit a

Clustering and curation of electropherograms: an efficient method for analyzing large cohorts of capillary electrophoresis glycomic profiles for bioprocessing operations

• Ian Walsh,
• Matthew S. F. Choo,
• Sim Lyn Chiin,
• Amelia Mak,
• Shi Jie Tay,
• Pauline M. Rudd,
• Yang Yuansheng,
• Andre Choo,
• Ho Ying Swan and
• Terry Nguyen-Khuong

Beilstein J. Org. Chem. 2020, 16, 2087–2099, doi:10.3762/bjoc.16.176

• Reagent Solution (0.07 mg/µL in anhydrous dimethylformamide (DMF, Waters Corp.) was added to the released glycans, and the labelling proceeded at room temperature for 5 min. The reaction mixture was diluted by adding acetonitrile (ACN; final concentration 89.5%) in preparation for HILIC SPE. Purification

Mechanochemical green synthesis of hyper-crosslinked cyclodextrin polymers

• Alberto Rubin Pedrazzo,
• Fabrizio Caldera,
• Marco Zanetti,
• Silvia Lucia Appleton,
• Nilesh Kumar Dhakar and
• Francesco Trotta

Beilstein J. Org. Chem. 2020, 16, 1554–1563, doi:10.3762/bjoc.16.127

• CD nanosponges, after crosslinking, comprise carbonate bonds between the cyclodextrin monomers. If this reaction is carried out under classical conditions in a N,N-dimethylformamide (DMF) solution, an amorphous crosslinked insoluble polymer is obtained. In general, carbonate nanosponges are insoluble

• , ReagentPlus® grade, ≥99%), methyl red, rhodamine B, and fluorescein (for all dyes, declared dye content 95%), N,N-dimethylformamide (DMF, anhydrous, 99.8%), acetone (ACS reagent, ≥99.5%), and ethanol (ACS reagent, 96%) were purchased from Sigma-Aldrich (Munich, Germany) and used without further purification

Synthesis and properties of quinazoline-based versatile exciplex-forming compounds

• Rasa Keruckiene,
• Simona Vekteryte,
• Ervinas Urbonas,
• Matas Guzauskas,
• Eigirdas Skuodis,
• Dmytro Volyniuk and
• Juozas V. Grazulevicius

Beilstein J. Org. Chem. 2020, 16, 1142–1153, doi:10.3762/bjoc.16.101

• compounds 1–3 were synthesized through nucleophilic substitution reactions between quinazoline derivative Q1 and the respective donor compound in the presence of sodium hydride in dry dimethylformamide (DMF). The reaction mixtures were refluxed for 24 h. After completion of the reactions, the reaction

• ): Quinazoline derivative (Q1, 0.25 g, 0.79 mmol), 3,6-di-tert-butylcarbazole (0.48 g, 1.7 mmol) and sodium hydride (0.50 g, 1.6 mmol) in dry dimethylformamide (DMF) were used for the nucleophilic substitution reaction. The title compound was obtained as yellowish crystals in a yield of 0.25 g, 37%; Tm = 181 °C

• mmol) and sodium hydride (0.50 g, 1.6 mmol) in dry dimethylformamide (DMF) were used for the nucleophilic substitution reaction. The title compound was obtained as yellowish crystals in a yield of 0.10 g, 21%; Tm = 233 °C; 1H NMR (400 MHz, CDCl3) δ 8.93 (s, 2H), 8.11 (s, 2H), 7.89-7.84 (s, 4H), 7.56 (s

Suzuki–Miyaura cross coupling is not an informative reaction to demonstrate the performance of new solvents

• James Sherwood

Beilstein J. Org. Chem. 2020, 16, 1001–1005, doi:10.3762/bjoc.16.89

• of Mizoroki–Heck reactions have a strong dependence on the dipolarity of the reaction medium, and the rate determining step can be controlled by the equivalents of ligand added, thereby eliminating one variable [8]. Reprotoxic solvents such as N,N-dimethylformamide (DMF) are routinely used in the

Accelerating fragment-based library generation by coupling high-performance photoreactors with benchtop analysis

• Quentin Lefebvre,
• Christophe Salomé and
• Thomas C. Fessard

Beilstein J. Org. Chem. 2020, 16, 982–988, doi:10.3762/bjoc.16.87

• were slightly altered: a smaller excess of amine was used, and dimethyl sulfoxide (DMSO) was chosen as solvent instead of dimethylformamide (DMF) or dimethylacetamide (DMA) to improve work-up and purification. The workflow was devised to ensure maximal productivity, using parallel experimentation

Efficient synthesis of piperazinyl amides of 18β-glycyrrhetinic acid

• Dong Cai,
• ZhiHua Zhang,
• Yufan Meng,
• KaiLi Zhu,
• LiYi Chen,
• ChangXiang Yu,
• ChangWei Yu,
• ZiYi Fu,
• DianShen Yang and
• YiXia Gong

Beilstein J. Org. Chem. 2020, 16, 798–808, doi:10.3762/bjoc.16.73

• , N,N-dimethylformamide (DMF), a solvent with a higher boiling point than acetonitrile, was also tested, yet the reaction led to the formation of unknown compounds (TLC monitoring, Table 2, entry 7). After screening several solvents, the optimal yield was obtained in acetonitrile, though a small

Design and synthesis of diazine-based panobinostat analogues for HDAC8 inhibition

• Sivaraman Balasubramaniam,
• Sajith Vijayan,
• Liam V. Goldman,
• Xavier A. May,
• Kyra Dodson,
• Sweta Adhikari,
• Fatima Rivas,
• Davita L. Watkins and
• Shana V. Stoddard

Beilstein J. Org. Chem. 2020, 16, 628–637, doi:10.3762/bjoc.16.59

• dimethylformamide (DMF) were degassed in 20 L drums and passed through two sequential purification columns (activated alumina; molecular sieves for DMF) under a positive argon atmosphere. Thin-layer chromatography (TLC) was performed on SiO2-60 F254 aluminum plates with visualization by ultraviolet (UV) detection

Six-fold C–H borylation of hexa-peri-hexabenzocoronene

• Mai Nagase,
• Kenta Kato,
• Akiko Yagi,
• Yasutomo Segawa and
• Kenichiro Itami

Beilstein J. Org. Chem. 2020, 16, 391–397, doi:10.3762/bjoc.16.37

• and then refilled with nitrogen. To this vessel were added 3 (100 mg, 78.3 μmol, 1.0 equiv), Pd(dppf)Cl2 (28.6 mg, 39.1 μmol, 0.5 equiv), bis(pinacolato)diboron (B2pin2; 199 mg, 783 μmol, 10 equiv), toluene (0.36 mL) and N,N-dimethylformamide (DMF; 0.36 mL). The mixture was stirred at 80 °C for 18 h

Effect of ring size on photoisomerization properties of stiff stilbene macrocycles

• Sandra Olsson,
• Óscar Benito Pérez,
• Magnus Blom and
• Adolf Gogoll

Beilstein J. Org. Chem. 2019, 15, 2408–2418, doi:10.3762/bjoc.15.233

• dichloromethane (DCM), ethyl acetate, pentane, tetrahydrofuran (THF) and toluene that were distilled before use. N,N-Dimethylformamide (DMF) was used as supplied (biotech. grade, ≥99.9%). Unless stated differently, all reactions were carried out under atmospheric pressure and with argon atmosphere. Microwave (MW

Recent advances on the transition-metal-catalyzed synthesis of imidazopyridines: an updated coverage

• Gagandeep Kour Reen,
• Ashok Kumar and
• Pratibha Sharma

Beilstein J. Org. Chem. 2019, 15, 1612–1704, doi:10.3762/bjoc.15.165

• enaminones 61 by conjugative addition of heteroarylamines 3 with α,β-ynones 60 (Scheme 20). Optimization of the reaction inferred that CuI with dimethylformamide (DMF) at 100 °C under air would be the best conditions for a maximum yield. The reaction viability was also tested without the isolation of product

Synthesis and conformational preferences of short analogues of antifreeze glycopeptides (AFGP)

• Małgorzata Urbańczyk,
• Michał Jewgiński,
• Joanna Krzciuk-Gula,
• Jerzy Góra,
• Rafał Latajka and
• Norbert Sewald

Beilstein J. Org. Chem. 2019, 15, 1581–1591, doi:10.3762/bjoc.15.162

• ]. General methods All air- and moisture-sensitive reactions were carried out in a dry argon atmosphere in flame-dried glass flasks. Dichloromethane (DCM) was freshly distilled from CaH2 and toluene from Na. N,N-Dimethylformamide (DMF) was distilled from ninhydrine. All amino acids, coupling reagents and the

A novel three-component reaction between isocyanides, alcohols or thiols and elemental sulfur: a mild, catalyst-free approach towards O-thiocarbamates and dithiocarbamates

• András György Németh,
• György Miklós Keserű and
• Péter Ábrányi-Balogh

Beilstein J. Org. Chem. 2019, 15, 1523–1533, doi:10.3762/bjoc.15.155

• did not improve the yield of the reaction (Table 2, entry 6), nor did the use of Cs2CO3 (Table 2, entry 7). However, using N,N-dimethylformamide (DMF) or N,N-dimethylacetamide (DMA) as the solvent provided 5a in 43% and 45% yield, respectively (Table 2, entries 8 and 9), while on the other hand, N

Towards the preparation of synthetic outer membrane vesicle models with micromolar affinity to wheat germ agglutinin using a dialkyl thioglycoside

• Dimitri Fayolle,
• Nathalie Berthet,
• Bastien Doumeche,
• Olivier Renaudet,
• Peter Strazewski and
• Michele Fiore

Beilstein J. Org. Chem. 2019, 15, 937–946, doi:10.3762/bjoc.15.90

• -dimethylformamide (DMF) for the synthesis of 4 and 5. Compounds 4 and 5 were isolated in good yields (55 and 75%, respectively) [27]. The syntheses of compounds 7 and 8 were carried out in DMF as well. As substantial amounts of 6 were isolated after the reaction, indicating an incomplete conversion to 8 (53%), the

Homo- and hetero-difunctionalized β-cyclodextrins: Short direct synthesis in gram scale and analysis of regiochemistry

• Gábor Benkovics,
• Mihály Bálint,
• Éva Fenyvesi,
• Erzsébet Varga,
• Szabolcs Béni,
• Konstantina Yannakopoulou and
• Milo Malanga

Beilstein J. Org. Chem. 2019, 15, 710–720, doi:10.3762/bjoc.15.66

• the homo-disubstituted derivatives, e.g., 6A,6X-diazido-β-CDs can be prepared using sodium azide in N,N-dimethylformamide (DMF) and moderate heating (Scheme 1). Although capping reagents are selective in disubstitution and this methodology revolutionized CD difunctionalization, their application has

A simple and effective preparation of quercetin pentamethyl ether from quercetin

• Jin Tatsuzaki,
• Tomohiko Ohwada,
• Yuko Otani,
• Reiko Inagi and
• Tsutomu Ishikawa

Beilstein J. Org. Chem. 2018, 14, 3112–3121, doi:10.3762/bjoc.14.291

• potassium carbonate (K2CO3) are generally selected as the solvent and base, acetone can be replaced with dimethylformamide (DMF) if the starting phenol is poorly soluble in acetone. To our knowledge four reactions [37][38][39][40] were found in the literature as successful per-O-methylations of quercetin (2

Enhanced single-isomer separation and pseudoenantiomer resolution of new primary rim heterobifunctionalized α-cyclodextrin derivatives

• Iveta Tichá,
• Gábor Benkovics,
• Milo Malanga and
• Jindřich Jindřich

Beilstein J. Org. Chem. 2018, 14, 2829–2837, doi:10.3762/bjoc.14.261

• ). On one hand, a direct bromination of α-CD was performed under Vilsmeier/Haack conditions (reaction 3, Scheme 2) with N-bromosuccinimide (NBS) and Ph3P in N,N-dimethylformamide (DMF). Previous studies have shown that this reaction is highly regioselective for the primary rim of CD [28]. After a fast