Reactivity of bromoselenophenes in palladium-catalyzed direct arylations

• Aymen Skhiri,
• Ridha Ben Salem,
• Jean-François Soulé and
• Henri Doucet

Beilstein J. Org. Chem. 2017, 13, 2862–2868, doi:10.3762/bjoc.13.278

• , respectively. The use of 2-pentyl- and 2-chlorothiophenes also gave the desired products 10 and 11 in high yields. In general, the Pd-catalyzed direct arylation of 3-substituted thiophenes with aryl halides afforded quite regioselectively the C2-arylated thiophenes [30]. A similar regioselectivity was oberved

• , whereas thiophene or pyrroles gave the desired products in low yields. Conversely, 2,5-dibromoselenophene was successfully coupled with both thiazoles and thiophenes in the presence of phosphine-free Pd(OAc)2 catalyst precursor and KOAc as inexpensive base, affording the desired 2,5-diheteroarylated

CF₃SO₂X (X = Na, Cl) as reagents for trifluoromethylation, trifluoromethylsulfenyl-, -sulfinyl- and -sulfonylation and chlorination. Part 2: Use of CF₃SO₂Cl

• Hélène Chachignon,
• Hélène Guyon and
• Dominique Cahard

Beilstein J. Org. Chem. 2017, 13, 2800–2818, doi:10.3762/bjoc.13.273

• -free and recyclable. A variety of heteroarenes, like pyrroles, oxazoles, furanes, thiophenes, indoles and pyrazines were successfully converted into the corresponding trifluoromethylated products in moderate to good yields (Scheme 27). Remarkably, a side chlorination reaction was observed during the

Rh(II)-mediated domino [4 + 1]-annulation of α-cyanothioacetamides using diazoesters: A new entry for the synthesis of multisubstituted thiophenes

• Jury J. Medvedev,
• Ilya V. Efimov,
• Yuri M. Shafran,
• Vitaliy V. Suslonov,
• Vasiliy A. Bakulev and
• Valerij A. Nikolaev

Beilstein J. Org. Chem. 2017, 13, 2569–2576, doi:10.3762/bjoc.13.253

• Str., 620002, Ekaterinburg, Russia Center for X-ray Diffraction Studies, St-Petersburg State University, 26 University pr., 198504, Saint-Petersburg, Russia 10.3762/bjoc.13.253 Abstract A new approach towards the synthesis of multisubstituted thiophenes is elaborated based on Rh(II)-catalyzed domino

• reactions; thiophenes; Introduction In recent years the diversified reactivity of metal carbenes, catalytically generated from diazocarbonyl compounds, has found wide application in organic synthesis [1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16]. A particular interest was attracted recently to

• thioamides depended significantly on the size of the substituent on the nitrogen atom of the thioamide group. Thus, decomposition of diazomalonate 2a in the presence of thioacetamide 1d bearing a bulky substituent occurred in boiling benzene within 8 h to afford thiophenes 3d and 4d in 30 and 24% yields

Structure–property relationships and third-order nonlinearities in diketopyrrolopyrrole based D–π–A–π–D molecules

• Jan Podlesný,
• Lenka Dokládalová,
• Oldřich Pytela,
• Adam Urbanec,
• Milan Klikar,
• Numan Almonasy,
• Tomáš Mikysek,
• Jaroslav Jedryka,
• Iwan V. Kityk and
• Filip Bureš

Beilstein J. Org. Chem. 2017, 13, 2374–2384, doi:10.3762/bjoc.13.235

• absorption cross-section (δ2PA) generally ranging from 100–2500 GM, but for instance DPPs end-capped with imidazolium [21] or dendritic thiophenes [16] showed δ2PA of 4000 and 7000 GM, respectively. However, to the best of our knowledge, the third-harmonic generation (THG) NLO process has not been

Transition-metal-catalyzed synthesis of phenols and aryl thiols

• Yajun Liu,
• Shasha Liu and
• Yan Xiao

Beilstein J. Org. Chem. 2017, 13, 589–611, doi:10.3762/bjoc.13.58

• were converted to the corresponding phenols. Moreover, heteroarenes, such as pyridine and thiophenes, could also give hydroxylated products under their conditions. In 2016, Jana and co-workers used N-(8-quinolinyl)benzamides as starting materials, and ortho-hydroxylation occurred in the presence of a

Synthesis and optical properties of new 5'-aryl-substituted 2,5-bis(3-decyl-2,2'-bithiophen-5-yl)-1,3,4-oxadiazoles

• Anastasia S. Kostyuchenko,
• Tatyana Yu. Zheleznova,
• Anton J. Stasyuk,
• Aleksandra Kurowska,
• Wojciech Domagala,
• Adam Pron and
• Alexander S. Fisyuk

Beilstein J. Org. Chem. 2017, 13, 313–322, doi:10.3762/bjoc.13.34

• Discussion Synthetic toolbox It is well known that thiophenes containing acceptor groups such as CHO, CN or CO2Me at the C-2 position readily react with aryl halides in the presence of a Pd(II) catalyst through a Heck-type coupling [26]. We have synthesized the ethyl ester of 2,2'-bithiophene-5-carboxylic

A new paradigm for designing ring construction strategies for green organic synthesis: implications for the discovery of multicomponent reactions to build molecules containing a single ring

• John Andraos

Beilstein J. Org. Chem. 2016, 12, 2420–2442, doi:10.3762/bjoc.12.236

• showed that benzimidazoles, Biginelli adducts, dihydropyridines, furans, pyrans, pyridinones, and thiophenes had a high representation of intrinsic greenness; whereas, a high proportion of MCRs producing chromene-4-ones, coumarins, indoles, and pyrazoles had low probabilities of achieving intrinsic

High performance p-type molecular electron donors for OPV applications via alkylthiophene catenation chromophore extension

• Paul B. Geraghty,
• Calvin Lee,
• Jegadesan Subbiah,
• Wallace W. H. Wong,
• James L. Banal,
• Mohammed A. Jameel,
• Trevor A. Smith and
• David J. Jones

Beilstein J. Org. Chem. 2016, 12, 2298–2314, doi:10.3762/bjoc.12.223

• generate the previously unreported 4-alkyl-2-(trimethylsilyl)thiophenes 2a–c, which could be purified by distillation to ensure removal of unreacted 3-alkylthiophene, Scheme 1. Deprotonation of 2 with n-butyllithium and reaction with 2-isopropoxy-4,4,5,5-tetramethyl-1,3,2-dioxaborolane (iPrOBPin) resulted

Regiocontroled Pd-catalysed C5-arylation of 3-substituted thiophene derivatives using a bromo-substituent as blocking group

• Mariem Brahim,
• Hamed Ben Ammar,
• Jean-François Soulé and
• Henri Doucet

Beilstein J. Org. Chem. 2016, 12, 2197–2203, doi:10.3762/bjoc.12.210

• et Catalyse Homogène, (UR 11ES56) Université de Monastir, Faculté des Sciences de Monastir, avenue de l’environnement, Monastir 5000, Tunisia 10.3762/bjoc.12.210 Abstract The use of a bromo-substituent as blocking group at the C2-position of 3-substituted thiophenes allows the regioselective

• introduction of aryl substituents at C5-position via Pd-catalysed direct arylation. With 1 mol % of a phosphine-free Pd catalyst, KOAc as the base and DMA as the solvent and various electron-deficient aryl bromides as aryl sources, C5-(hetero)arylated thiophenes were synthesized in moderate to high yields

• , without cleavage of the thienyl C–Br bond. Moreover, sequential direct thienyl C5-arylation followed by Pd-catalysed direct arylation or Suzuki coupling at the C2-position allows to prepare 2,5-di(hetero)arylated thiophenes bearing two different (hetero)aryl units in only two steps. This method provides a

Thiophene-forming one-pot synthesis of three thienyl-bridged oligophenothiazines and their electronic properties

• Dominik Urselmann,
• Konstantin Deilhof,
• Bernhard Mayer and
• Thomas J. J. Müller

Beilstein J. Org. Chem. 2016, 12, 2055–2064, doi:10.3762/bjoc.12.194

• cyclization synthesis of symmetrically 2,5-diaryl-substituted thiophenes is excellently suited to access thienyl-bridged oligophenothiazines in a one-pot fashion. Three thienyl-bridged systems were intensively studied by UV–vis and fluorescence spectroscopy as well as by cyclic voltammetry. The oxidation

• ; copper; cyclic voltammetry; DFT; microwave-assisted synthesis; multicomponent reactions; palladium; phenothiazines; thiophenes; Introduction Oligothiophenes [1][2][3][4][5][6][7][8] have adopted a dominating role among functional π-electron systems [9]. In particular, they have received attention as

• hole-transport materials in organic light emitting diodes [10][11][12][13][14][15], organic field-effect transistors [16][17][18][19][20][21][22], and organic photovoltaics [23][24][25][26]. Likewise their smaller congeners, 2,5-di(hetero)aryl substituted thiophenes [4][5], are equally relevant as

A convenient route to symmetrically and unsymmetrically substituted 3,5-diaryl-2,4,6-trimethylpyridines via Suzuki–Miyaura cross-coupling reaction

• Dariusz Błachut,
• Joanna Szawkało and
• Zbigniew Czarnocki

Beilstein J. Org. Chem. 2016, 12, 835–845, doi:10.3762/bjoc.12.82

• teams in the construction of polyarylated benzenes [56], pyridines [57][58][59][60], thiophenes [61][62], quinoxalines [63], pyrazoles [64] pyrroles [65], pyrimidines [66][67], benzofuranes [68], imidazo[1,2-a]pyridines [69], diaryl/heteroaryl methanes [70], and indoles [71], bearing differently

• construction of unsymmetrically arylated pyrroles, thiophenes and 2,6- and 3,5-diarylpyridines. In order to test the utility of the above mentioned approach, a series of trial cross couplings were performed on a microscale according to route 3 with a variety of electron-poor and electron-rich boronic acids

Iridium/N-heterocyclic carbene-catalyzed C–H borylation of arenes by diisopropylaminoborane

• Mamoru Tobisu,
• Takuya Igarashi and
• Naoto Chatani

Beilstein J. Org. Chem. 2016, 12, 654–661, doi:10.3762/bjoc.12.65

• a 1.1:1 mixture of 2-borylated and 2,5-diborylated products under our standard conditions (Table 2, entry 10). 2-Substituted thiophenes 14 and 15 and furan 16 were borylated successfully at the 5-positions (Table 2, entries 11–13). Electron-deficient heteroarenes such as pyridine and quinolone

Efficient synthesis of π-conjugated molecules incorporating fluorinated phenylene units through palladium-catalyzed iterative C(sp²)–H bond arylations

• Fatiha Abdelmalek,
• Fazia Derridj,
• Safia Djebbar,
• Jean-François Soulé and
• Henri Doucet

Beilstein J. Org. Chem. 2015, 11, 2012–2020, doi:10.3762/bjoc.11.218

• involved in palladium-catalyzed direct arylations with a set of heteroarenes (e.g., thiophenes, thiazoles, furans). Then, the resulting heteroarylated polyfluorobenzenes were arylated using PdCl(C3H5)(dppb) catalyst in the presence of KOAc as the base in DMA at 150 °C using a wide range of aryl bromides as

• coupling partners. On the other hand, benzenesulfonyl chlorides were recently introduced as powerful arylating agents, through metal-catalyzed C–H bond activation [47][48][49][50][51][52][53][54][55]. Such desulfitative direct arylations sometimes offered different regioselectivities, e.g., thiophenes were

• -(2,3,4-trifluorophenyl)pyrrole (4). i) PdCl(C3H5)(dppb) (2 mol %), KOAc (2 equiv), DMA, 150 °C, 16 h. Pd-catalyzed direct regioselective arylation of 3-(2,3,4-trifluorophenyl)thiophenes. i) PdCl(C3H5)(dppb) (2 mol %), KOAc (2 equiv), DMA, 150 °C, 16 h. Pd-catalyzed desulfitative direct arylations of

Polythiophene and oligothiophene systems modified by TTF electroactive units for organic electronics

• Alexander L. Kanibolotsky,
• Neil J. Findlay and
• Peter J. Skabara

Beilstein J. Org. Chem. 2015, 11, 1749–1766, doi:10.3762/bjoc.11.191

• between thiophenes C and G is higher (18.36°) but the two S-atoms are involved in a weak non-covalent interaction with a distance of 3.81 Å between them. The strong π–π stacking interaction and the presence of multiple S–S non-covalent interactions in the H-shaped TTF-oligothiophene system 54 (n = 2) made

An efficient synthesis of N-substituted 3-nitrothiophen-2-amines

• Sundaravel Vivek Kumar,
• Shanmugam Muthusubramanian,
• J. Carlos Menéndez and
• Subbu Perumal

Beilstein J. Org. Chem. 2015, 11, 1707–1712, doi:10.3762/bjoc.11.185

• ; Introduction Thiophenes constitute an important class of heterocyclic compounds, and are embedded in natural [1] and unnatural [2] organic molecules with diverse biological activities. Among them, many 2-aminothiophenes have reached the market or have undergone extensive pharmacological studies. Representative

• limitations in existing synthetic methodologies, particularly in the direct preparation of N-substituted amino derivatives. 2-Aminothiophenes have traditionally been synthesized from mercapto- or halogen-substituted thiophenes through nucleophilic displacements [19]. More recently, these derivatives have been

• allenes catalyzed by PPh3 [22] (Scheme 1a–c). On the other hand, studies on the synthesis of 3-nitrothiophenes are scarce. One of the traditional methods involves electrophilic aromatic substitution reactions of thiophenes, which introduces substituents at the 2- and 5-positions, but with some drawbacks

A new and convenient synthetic way to 2-substituted thieno[2,3-b]indoles

• Roman A. Irgashev,
• Arseny A. Karmatsky,
• Gennady L. Rusinov and
• Valery N. Charushin

Beilstein J. Org. Chem. 2015, 11, 1000–1007, doi:10.3762/bjoc.11.112

• , including oxidative cyclization of indolin-2-thiones 1 [20], radical or palladium catalyzed cyclization of 3-(2-bromoindol-3-yl)acrylonitriles 2 [21][22], intramolecular CH/NH-coupling in benzo[b]thiophenes 3 [23], AlCl3 catalyzed recyclization of 2-(2-isothiocyanatophenyl)furanes 4 [24], reductive

• cyclization of 3-(2-nirtophenyl)thiophenes 5 via nitrene intermediates [25][26], and condensation of 3-unsubstituted indolin-2-thione 6 with aliphatic α-bromoaldehydes, α-bromoketones [27] or 3-halochromones (Hlg = Cl, Br) [28] under basic conditions (Scheme 1). However, all synthetic methods mentioned above

• are based on using functionalized indoles, thiophenes, furans or chromone precursors, which require several steps to be prepared. Results and Discussion In this paper we wish to report a convenient, short and robust approach to 8-alkyl-2-(het)arylthieno[2,3-b]indoles from 1-alkylisatins and the

Thiazole formation through a modified Gewald reaction

• Carl J. Mallia,
• Lukas Englert,
• Gary C. Walter and
• Ian R. Baxendale

Beilstein J. Org. Chem. 2015, 11, 875–883, doi:10.3762/bjoc.11.98

• The synthesis of thiazoles and thiophenes starting from nitriles, via a modified Gewald reaction has been studied for a number of different substrates. 1,4-Dithiane-2,5-diol was used as the aldehyde precursor to give either 2-substituted thiazoles or 2-substituted aminothiophenes depending on the

• molecules [12][13][14][15][16][17][18][19][20]. Substrates which did not react under the optimised conditions. Illustration of substrates that form thiophenes under Gewald-type conditions. Proposed mechanisms for the formation of thiazoles. Scoping experiments using ethyl phenylcyanoacetate (16) with

Weakly nucleophilic potassium aryltrifluoroborates in palladium-catalyzed Suzuki–Miyaura reactions: relative reactivity of K[4-RC₆F₄BF₃] and the role of silver-assistance in acceleration of transmetallation

• Vadim V. Bardin,
• Anton Yu. Shabalin and
• Nicolay Yu. Adonin

Beilstein J. Org. Chem. 2015, 11, 608–616, doi:10.3762/bjoc.11.68

• are much more stable and can be isolated [22][23], although for preparative aims they usually are generated in situ. This approach has been successfully used for arylation of alkenes, alkynes, insertion of CO species [23][24][25][26][27][28][29][30][31], polyfluoroarenes and thiophenes [32]. The

Bis(vinylenedithio)tetrathiafulvalene analogues of BEDT-TTF

• Erdal Ertas,
• İlknur Demirtas and
• Turan Ozturk

Beilstein J. Org. Chem. 2015, 11, 403–415, doi:10.3762/bjoc.11.46

• to produce the ET analogues having 1,4-dithiin rings 79 (80%) and thiophene rings 80 and 81 (75%) as inseparable isomers. Unfortunately, all attempts to electropolymerize the analogues failed. Computational studies indicated that the α-carbons of the peripheral thiophenes, where the polymerization

Enhancing the reactivity of 1,2-diphospholes in cycloaddition reactions

• Almaz Zagidullin,
• Vasili Miluykov,
• Elena Oshchepkova,
• Artem Tufatullin,
• Olga Kataeva and
• Oleg Sinyashin

Beilstein J. Org. Chem. 2015, 11, 169–173, doi:10.3762/bjoc.11.17

• significant interest for the preparation of highly effective catalysts, materials for light-emitting diodes and nonlinear optics [3][4]. In contrast to furans, thiophenes and pyrroles, phospholes display cycloaddition and complexation reactions and can be used as starting materials for caged phosphines

Palladium-catalyzed 2,5-diheteroarylation of 2,5-dibromothiophene derivatives

• Fatma Belkessam,
• Aidene Mohand,
• Jean-François Soulé,
• Abdelhamid Elias and
• Henri Doucet

Beilstein J. Org. Chem. 2014, 10, 2912–2919, doi:10.3762/bjoc.10.309

• –2 mol % palladium catalysts, the target 2,5-diheteroarylated thiophenes were obtained in moderate to good yields and with a wide variety of heteroarenes such as thiazoles, thiophenes, furans, pyrroles, pyrazoles or isoxazoles. Moreover, sequential heteroarylation reactions allow the access to 2,5

• -diheteroarylated thiophenes bearing two different heteroaryl units. Keywords: aryl halides; catalysis; C–H bond activation; direct arylation; heteroarenes; palladium; Introduction 2,2':5',2"-Terthiophene (or 2,5-di(2-thienyl)thiophene) (Figure 1) and many of its derivatives are important structures due to their

• semiconductors [2]. Due to these multiple uses, the discovery of a simpler access to terthiophene derivatives would be very useful. Suzuki, Stille or Negishi Pd-catalyzed cross-coupling reactions represent some of the most efficient methods for the preparation of 2,5-diheteroarylated thiophenes [3][4][5][6][7][8

Copper-promoted hydration and annulation of 2-fluorophenylacetylene derivatives: from alkynes to benzo[b]furans and benzo[b]thiophenes

• Yibiao Li,
• Liang Cheng,
• Xiaohang Liu,
• Bin Li and
• Ning Sun

Beilstein J. Org. Chem. 2014, 10, 2886–2891, doi:10.3762/bjoc.10.305

• nucleophilic annulation process (Scheme 1b) [24]. But this method involves a two-step process and the usage of two different metal salts may complicate further processing. The direct design of a Pd or Cu-catalyzed one-pot synthesis of benzo[b]thiophenes from 2-bromoalkynylbenzenes and a thiol derivative has

• ]thiophenes with 2-fluorophenylacetylene derivatives as precursors (Scheme 1c). Results and Discussion We report an efficient synthesis of functionalized benzo[b]furans from commercially available alkynes by a copper-catalyzed, intramolecular annulation process. Initially, our investigation commenced with the

• with DMSO as the solvent and a reaction temperature of 60 °C. Using the optimized reaction conditions, 3-chloro and 4-chloro substituted 2-fluoroalkynylbenzenes were reacted with Na2S·9H2O to yield benzo[b]thiophenes in good yields. The postulated reaction mechanism is depicted in Scheme 6 [25][26][27

Solution processable diketopyrrolopyrrole (DPP) cored small molecules with BODIPY end groups as novel donors for organic solar cells

• Diego Cortizo-Lacalle,
• Calvyn T. Howells,
• Upendra K. Pandey,
• Joseph Cameron,
• Neil J. Findlay,
• Anto Regis Inigo,
• Tell Tuttle,
• Peter J. Skabara and
• Ifor D. W. Samuel

Beilstein J. Org. Chem. 2014, 10, 2683–2695, doi:10.3762/bjoc.10.283

• synthesise 6. Whereas the synthesis of 6 was achieved in 33% yield, the yield decreased to 12% when the derivative with two thiophenes was prepared [47]. The BODIPY-DPP-BODIPY triads (9 and 10) were synthesised via Suzuki–Miyaura cross-coupling by reaction of the functionalised DPP core 8 [48] with the

• are due to the reduction of the DPP and BODIPY moieties. By analogy, the reduction waves at higher negative potentials can be due to the reduction of the oligothiophene units, with 10 having a lower reduction potential for the reduction of the thiophenes because of the extended conjugated chain. The

• bathochromically shifts the wide absorption band associated with the DPP core and thiophene rings. The DPP core substituted with two thiophenes (compound 11) showed two intense peaks at 512 and 548 nm. These peaks are red-shifted 72 and 74 nm, respectively, for 9 (584 and 622 nm). The shift is even larger for 10

Gold(I)-catalysed synthesis of a furan analogue of thiamine pyrophosphate

• Amjid Iqbal,
• El-Habib Sahraoui and
• Finian J. Leeper

Beilstein J. Org. Chem. 2014, 10, 2580–2585, doi:10.3762/bjoc.10.270

• dehydrative cyclisation reaction of alkynyl alcohols catalysed by simple gold(I) salts [31]. The reaction proceeds rapidly under mild, open flask conditions to provide aromatic heterocycles such as furans, pyrroles and thiophenes in high yield with low catalyst loadings (Scheme 2). Following this synthetic

Photochemical approach to functionalized benzobicyclo[3.2.1]octene structures via fused oxazoline derivatives from 4- and 5-(o-vinylstyryl)oxazoles

• Ivana Šagud,
• Simona Božić,
• Željko Marinić and
• Marija Šindler-Kulyk

Beilstein J. Org. Chem. 2014, 10, 2222–2229, doi:10.3762/bjoc.10.230

• ]. Various methodologies and new synthetic approaches for their preparation and reactivity have been reviewed [3]. Continuing our long-standing interest for photochemical intramolecular cycloaddition reactions of various β-heteroaryl-o-divinylbenzenes, furans [4][5][6], thiophenes [6][7][8], pyroles [9][10