A review of asymmetric synthetic organic electrochemistry and electrocatalysis: concepts, applications, recent developments and future directions

• Munmun Ghosh,
• Valmik S. Shinde and
• Magnus Rueping

Beilstein J. Org. Chem. 2019, 15, 2710–2746, doi:10.3762/bjoc.15.264

• 79. The complex 79 consisting of diols and a chiral copper catalyst Cu–L* easily gets deprotonated by cathodically generated MeO− to afford alkoxide anions 80, which reacts with anodically generated Br+ to form O-brominated intermediates 81. Finally, MeO− removed HBr from 81 to afford products 75/78

Recent advances in transition-metal-catalyzed incorporation of fluorine-containing groups

• Xiaowei Li,
• Xiaolin Shi,
• Xiangqian Li and
• Dayong Shi

Beilstein J. Org. Chem. 2019, 15, 2213–2270, doi:10.3762/bjoc.15.218

• phase-transfer copper catalyst (Scheme 27). Notably, with 10 mol % of (IPr)CuOTf, full conversion can be accomplished in 10 minutes at 45 °C. Allylic fluorination: In 2013, there is an example of a copper-catalyzed fluorination of internal allylic bromides (Scheme 28). In Liu’s study, this approach was

• the same year, Loh’s group [132] used the same copper catalyst and Togni’s reagent to achieve the trifluoromethylation of enamides in good yields at room temperature (Scheme 72a). Meanwhile, this reaction exhibited excellent stereoselectivity towards the E-isomer. One year later, the same group [133

• , mild reaction conditions (room temperature) and excellent functional group tolerance. In this instance, the copper catalyst may only promote the generation of the tert-butoxyl radical from TBHP. The oxidation of the intermediate A with t-BuOOH produces a carbocation B, followed by an oxidative

Synthesis of benzo[d]imidazo[2,1-b]benzoselenoazoles: Cs₂CO₃-mediated cyclization of 1-(2-bromoaryl)benzimidazoles with selenium

• Mio Matsumura,
• Yuki Kitamura,
• Arisa Yamauchi,
• Yoshitaka Kanazawa,
• Yuki Murata,
• Tadashi Hyodo,
• Kentaro Yamaguchi and
• Shuji Yasuike

Beilstein J. Org. Chem. 2019, 15, 2029–2035, doi:10.3762/bjoc.15.199

• copper catalyst was not present (Table 1, entry 2). Several bases were screened for the reaction of 1a with Se powder (Table 1, entries 2–8). The use of Cs2CO3 resulted in the highest yield of 2a (99%, Table 1, entry 2). Decreasing the loading of Cs2CO3 from 2 to 1 equivalent significantly reduced the

Recent advances on the transition-metal-catalyzed synthesis of imidazopyridines: an updated coverage

• Gagandeep Kour Reen,
• Ashok Kumar and
• Pratibha Sharma

Beilstein J. Org. Chem. 2019, 15, 1612–1704, doi:10.3762/bjoc.15.165

• copper catalyst dissolved in ionic liquid to four synthetic cycles. Nanotechnology coupled with heterogeneous catalysis has emerged as an efficient field of catalysis for various organic transformations. Inspired from this Bagdi et al. have reported a nano-copper oxide-mediated three-component A3

• , where the absence of copper did not lead to the product formation (Table 4, entry 1). A double oxidative C–H amination reaction for the synthesis of 2-iodoimidazo[1,2-a]pyridines 137 was reported by Dheer et al. using a copper catalyst (Scheme 47) [129]. The synthesis of this moiety was also reported by

Multicomponent reactions (MCRs): a useful access to the synthesis of benzo-fused γ-lactams

• Edorta Martínez de Marigorta,
• Jesús M. de Los Santos,
• Ana M. Ochoa de Retana,
• Javier Vicario and
• Francisco Palacios

Beilstein J. Org. Chem. 2019, 15, 1065–1085, doi:10.3762/bjoc.15.104

• (Scheme 4). In this case, copper catalyst and alkynes are also used but, unlike the above method, alkynes 18 are monosubstituted. The third component is an indole or pyrrole derivative 19 and the result of the reaction is a 3,3-disubstituted isoindolinone derivative 20, which contains a newly formed

Cationic cobalt-catalyzed [1,3]-rearrangement of N-alkoxycarbonyloxyanilines

• Itaru Nakamura,
• Mao Owada,
• Takeru Jo and
• Masahiro Terada

Beilstein J. Org. Chem. 2018, 14, 1972–1979, doi:10.3762/bjoc.14.172

• 2-aminophenol derivative 2a (Table 1, entries 3 and 4). Moreover, a cationic copper catalyst generated from CuCl2 and two equivalents of AgSbF6 was effective to afford 2a in good yield (Table 1, entry 5), even at 30 °C (Table 1, entry 8). The use of a ligand, such as 1,10-phenanthroline (phen) and

Hypervalent organoiodine compounds: from reagents to valuable building blocks in synthesis

• Gwendal Grelier,
• Benjamin Darses and
• Philippe Dauban

Beilstein J. Org. Chem. 2018, 14, 1508–1528, doi:10.3762/bjoc.14.128

• catalytic benzoyloxy-trifluoromethylation using Togni’s reagent 5 (Scheme 4 and Scheme 5), the 1,2-benzoyloxy-azidation of alkenes can be performed in the presence of a copper catalyst with the azidobenziodoxolone ABX 40. The reaction takes place in dichloromethane using the copper(II) complex Cu(OTf)2 as

Atom-economical group-transfer reactions with hypervalent iodine compounds

• Andreas Boelke,
• Peter Finkbeiner and
• Boris J. Nachtsheim

Beilstein J. Org. Chem. 2018, 14, 1263–1280, doi:10.3762/bjoc.14.108

• Shafir, Lledós, and co-workers, who investigated the intrinsic conversion of novel N-heterocyclic aryliodonium salts 1b [35]. Under the influence of base, copper catalyst and N-Me-benzimidazole as a ligand, the heterocyclic aryliodonium salt 1b was converted into the N1-aryl-5-iodoimidazole 18 as the

Nanoreactors for green catalysis

• M. Teresa De Martino,
• Loai K. E. A. Abdelmohsen,
• Floris P. J. T. Rutjes and
• Jan C. M. van Hest

Beilstein J. Org. Chem. 2018, 14, 716–733, doi:10.3762/bjoc.14.61

• ]. To perform cyclopropanation reactions in polymersomes, the membrane was cross-linked with bisoxazoline (BOX) ligands complexing the copper catalyst. Cyclopropanation reactions were efficiently performed in water, resulting in high yields and enantioselectivities, comparable to those when the reaction

Copper-catalyzed asymmetric methylation of fluoroalkylated pyruvates with dimethylzinc

• Kohsuke Aikawa,
• Kohei Yabuuchi,
• Kota Torii and
• Koichi Mikami

Beilstein J. Org. Chem. 2018, 14, 576–582, doi:10.3762/bjoc.14.44

• fluoroalkylated pyruvates is shown with dimethylzinc as a methylating reagent in the presence of a copper catalyst bearing a chiral phosphine ligand. This is the first catalytic asymmetric methylation to synthesize various α-fluoroalkylated tertiary alcohols with CF3, CF2H, CF2Br, and n-CnF2n+1 (n = 2, 3, 8

• copper. Keywords: asymmetric methylation; chiral phosphine ligand; copper catalyst; dimethylzinc; trifluoropyruvate; Introduction The introduction of fluorine atoms into organic compounds plays an important role in the discovery of lead candidates with unique biological and physicochemical properties

• . Herein, we disclose the catalytic asymmetric methylation of trifluoropyruvate derivatives as electrophiles and dimethylzinc as a methylating nucleophile by a chiral copper catalyst. This method is also applicable to the asymmetric synthesis of various α-fluoroalkylated tertiary alcohols bearing CF2H

CF₃SO₂X (X = Na, Cl) as reagents for trifluoromethylation, trifluoromethylsulfenyl-, -sulfinyl- and -sulfonylation. Part 1: Use of CF₃SO₂Na

• Hélène Guyon,
• Hélène Chachignon and
• Dominique Cahard

Beilstein J. Org. Chem. 2017, 13, 2764–2799, doi:10.3762/bjoc.13.272

• 49. Finally, oxidation of 49 by Cu(n + 1) and aromatisation afforded the oxindole and regenerated the copper catalyst (Scheme 25). The same indoles bearing a 2,2,2-trifluoroethyl side-chain were also obtained in reactions performed with CF3SO2Na and (NH4)2S2O8 as the oxidant in the presence of a

• concentration, obtained by increasing the amount of copper catalyst, was beneficial to the chemoselectivity. Both styrene derivatives and terminal unactivated alkenes were suitable substrates in this transformation but not internal alkenes [55]. Csp2–CF3 bond-forming reactions Direct trifluoromethylation of

• authors studied the effect of structural variations in the substrate (R1 = aryl, heteroaryl, alkyl; R2 = H, 6-OMe, 2-Me). Aniline amides gave no conversion nor did quinoline having an ester group at the 8 position instead of the 8-amino group. The chitosan-based copper catalyst was efficiently reused in

Ring-size-selective construction of fluorine-containing carbocycles via intramolecular iodoarylation of 1,1-difluoro-1-alkenes

• Takeshi Fujita,
• Ryo Kinoshita,
• Tsuyoshi Takanohashi,
• Naoto Suzuki and
• Junji Ichikawa

Beilstein J. Org. Chem. 2017, 13, 2682–2689, doi:10.3762/bjoc.13.266

• (GlassContour) equipped with columns of activated alumina and supported-copper catalyst (Q-5) before use. 1,1,1,3,3,3-Hexafluoropropan-2-ol (HFIP) was distilled from CaH2 and stored over activated 4 Å molecular sieves. Unless otherwise noted, materials were obtained from commercial sources and used directly

Solvent-free copper-catalyzed click chemistry for the synthesis of N-heterocyclic hybrids based on quinoline and 1,2,3-triazole

• Martina Tireli,
• Silvija Maračić,
• Stipe Lukin,
• Marina Juribašić Kulcsár,
• Dijana Žilić,
• Mario Cetina,
• Ivan Halasz,
• Silvana Raić-Malić and
• Krunoslav Užarević

Beilstein J. Org. Chem. 2017, 13, 2352–2363, doi:10.3762/bjoc.13.232

• complete this reaction, which was further corroborated by ex situ analyses. The fact that we were able to monitor milling by method 2c, as opposed to methods 2a and 2b where copper catalyst was directly added to reaction mixture in catalytic quantity of 2–5 mol %, could tentatively be explained by even a

Conjugated nitrosoalkenes as Michael acceptors in carbon–carbon bond forming reactions: a review and perspective

• Yaroslav D. Boyko,
• Valentin S. Dorokhov,
• Alexey Yu. Sukhorukov and
• Sema L. Ioffe

Beilstein J. Org. Chem. 2017, 13, 2214–2234, doi:10.3762/bjoc.13.220

• reaction with α-bromo ketoximes 1 (Scheme 36). The reaction requires a copper catalyst, which transforms the diazo compound 96 into a metal carbene complex 97. The latter reacts with a nitrosoalkene intermediate NSA (formed from α-bromo ketoxime 1) producing isoxazoline 93 with recovery of the catalyst

Mechanochemical synthesis of small organic molecules

• Tapas Kumar Achar,
• Anima Bose and
• Prasenjit Mal

Beilstein J. Org. Chem. 2017, 13, 1907–1931, doi:10.3762/bjoc.13.186

• of styrenes with aryl bromides or aryl chlorides (Scheme 9) [59]. Sonogashira reaction Stolle and co-workers have reported a Sonogashira coupling reaction under ball milling conditions in which the reactions were done in absence of any copper catalyst or any additional ligands [60]. In presence of

• triazole moiety (Scheme 37a) using benzyl halides, sodium azide and a terminal alkyne via an alumina-supported copper catalyst. Using 10 mol % of Cu/Al2O3, differently substituted phenyl acetylenes and aliphatic alkynes led to 70–96% yield of triazoles [152]. Phenyl boronic acids were also used to

Mechanochemical synthesis of thioureas, ureas and guanidines

• Vjekoslav Štrukil

Beilstein J. Org. Chem. 2017, 13, 1828–1849, doi:10.3762/bjoc.13.178

• ) salts and Cu(0) in the powder form catalyzed the reaction. Most notably, the reaction proceeded in an excellent 87% yield even without external copper catalyst, only by using a brass milling ball. The catalyst was removed from the crude reaction mixture by briefly milling it with aqueous sodium

An eco-compatible strategy for the diversity-oriented synthesis of macrocycles exploiting carbohydrate-derived building blocks

• Sushil K. Maurya and
• Rohit Rana

Beilstein J. Org. Chem. 2017, 13, 1106–1118, doi:10.3762/bjoc.13.110

• addition of triethylamine in acetonitrile resulted in 65% yield. For developing greener conditions for the cycloaddition reaction, a control experiment with alkyne (1a) and azide (2a) in water at room temperature reacted up to 24 hours but in the absence of copper catalyst and base, only 6% conversion was

Transition-metal-catalyzed synthesis of phenols and aryl thiols

• Yajun Liu,
• Shasha Liu and
• Yan Xiao

Beilstein J. Org. Chem. 2017, 13, 589–611, doi:10.3762/bjoc.13.58

• formation of a copper(I) complex from the 1,2-ketone and the hydroxy group, which further coupled with aryl iodides through oxidative addition to generate a copper(III) complex. Phenols were liberated by the following reductive elimination [29]. You and co-workers used the same copper catalyst and reported

• . Although the ligand highly increased the catalytic activity of the copper catalyst, it was often used in large amount, making the process expensive and difficult in removing it. In this context, some ligand-free protocols have been developed by enhancing the reaction activity in some other ways. In 2011

• aryl methyl ethers. Several examples using catalytic amounts of copper catalyst have also been reported. In 2012, the Lei group developed mild conditions using a catalytic amount of CuCl2 to convert heterocycles to the hydroxylated products in the presence of NaOt-Bu in the air at room temperature

Effect of the ortho-hydroxy group of salicylaldehyde in the A³ coupling reaction: A metal-catalyst-free synthesis of propargylamine

• Sujit Ghosh,
• Kinkar Biswas,
• Suchandra Bhattacharya,
• Pranab Ghosh and
• Basudeb Basu

Beilstein J. Org. Chem. 2017, 13, 552–557, doi:10.3762/bjoc.13.53

• %, Table 1, entry 1). To check the role of our Cu(I) catalyst, we performed the same reaction under similar conditions in the absence of the copper catalyst (Table 1, entry 2). To our surprise, the same product spot was noticed on TLC plate and further work-up and purification afforded the product in

• comparable isolated yield. We became interested about our findings and wanted to explore the reaction further in the absence of a metal catalyst. We did the same experiment with o-anisaldehyde and 2-chlorobenzaldehyde without using any copper catalyst, and interestingly, there was no desired product formed

Direct arylation catalysis with chloro[8-(dimesitylboryl)quinoline-κN]copper(I)

• Sem Raj Tamang and
• James D. Hoefelmeyer

Beilstein J. Org. Chem. 2016, 12, 2757–2762, doi:10.3762/bjoc.12.272

• 4-membered transition state, followed by oxidative addition of ArI to Cu(I) [63]. Oxidative addition of arylhalide to Cu(I) produces Cu(III) intermediates, for which there is substantial evidence [64][65][66][67]. However, under catalytic conditions, there is no requirement that the copper catalyst

• encouraging in that an inexpensive copper catalyst at low loading exhibited good activity for the reaction. The observation of high activity using a preformed copper catalyst may assist in the development of new catalysts. Experimental General. Compounds 1 and 2 were prepared according to the literature [50

Copper-catalyzed asymmetric sp³ C–H arylation of tetrahydroisoquinoline mediated by a visible light photoredox catalyst

• Pierre Querard,
• Inna Perepichka,
• Eli Zysman-Colman and
• Chao-Jun Li

Beilstein J. Org. Chem. 2016, 12, 2636–2643, doi:10.3762/bjoc.12.260

• catalysts provide a mild and highly effective sp3 C–H asymmetric arylation of THIQs. Keywords: C–H arylation; copper catalyst; enantioselectivity; visible light; Introduction Functionalization of sp3 C–H bonds is a unique and powerful transformation in modern organic synthesis, which remains a challenging

• developed the first direct sp3 C–H arylation of THIQ with arylboronic acids using a copper catalyst (Scheme 1) [30]. Oxygen gas and tert-butyl hydroperoxide (TBHP) were used as external oxidants, which gave moderate to good isolated yields (up to 75%). In addition, we demonstrated the first enantioselective

Catalytic Chan–Lam coupling using a ‘tube-in-tube’ reactor to deliver molecular oxygen as an oxidant

• Carl J. Mallia,
• Paul M. Burton,
• Alexander M. R. Smith,
• Gary C. Walter and
• Ian R. Baxendale

Beilstein J. Org. Chem. 2016, 12, 1598–1607, doi:10.3762/bjoc.12.156

• Abstract A flow system to perform Chan–Lam coupling reactions of various amines and arylboronic acids has been realised employing molecular oxygen as an oxidant for the re-oxidation of the copper catalyst enabling a catalytic process. A tube-in-tube gas reactor has been used to simplify the delivery of the

• amounts of copper catalyst to be used [15][16]. Based upon our previous experience of using the reverse “tube-in-tube” reactor with other gases, it was decided that oxygen would be delivered via this reactor set-up (Figure 1). Results and Discussion In our initial screening, four different organic

• identify the optimum conditions for the reaction process, the amount of copper catalyst and the oxygen pressure were studied (Table 1). A set of control experiments with no oxygen was run and the amount of copper acetate catalyst was lowered from 1 to 0.25 equiv (entries 1–3, Table 1). As anticipated, with

Copper-catalyzed [3 + 2] cycloaddition of (phenylethynyl)di-p-tolylstibane with organic azides

• Mizuki Yamada,
• Mio Matsumura,
• Yuki Uchida,
• Masatoshi Kawahata,
• Yuki Murata,
• Naoki Kakusawa,
• Kentaro Yamaguchi and
• Shuji Yasuike

Beilstein J. Org. Chem. 2016, 12, 1309–1313, doi:10.3762/bjoc.12.123

• : cycloaddition; copper catalyst; ethynylstibane; organic azide; 1,2,3-triazole; Introduction The 1,3-dipolar azide–alkyne cycloaddition (AAC) has been effective for the synthesis of a wide variety of 1,2,3-triazoles [1]. However, this reaction has some limitations such as the requirement of high temperature and

Enantioselective carbenoid insertion into C(sp³)–H bonds

• J. V. Santiago and
• A. H. L. Machado

Beilstein J. Org. Chem. 2016, 12, 882–902, doi:10.3762/bjoc.12.87

• carbenoid was reported in 1952 by Peter Yates, although the author does not specifically use the term carbenoid, but – carbene–copper complex (Scheme 1) [3]. In his opinion, the copper catalyst promotes the decomposition of diazoketones to afford "free carbenes", the chemical intermediates responsible for

• catalytic system. Attempts to heterogeneous catalysis using chiral copper complexes were also done. Fraile et al reported, in 2011, the copper catalyst 60 for enantioselective insertion of carbenoid into O-heterocycles C(sp3)–H bonds (Table 7) [47][48]. The reaction was performed under homogeneous and

• to perform an enantioselective insertion of the carbenoid into benzylic C(sp3)–H bonds and similar results were observed [49]. In 2011, the same research group developed a new heterogeneous copper catalyst for carbenoid insertion into C(sp3)–H bonds [50]. The solid support was based on SiO2/Al2O3 and

Copper-catalyzed intermolecular oxyamination of olefins using carboxylic acids and O-benzoylhydroxylamines

• Brett N. Hemric and
• Qiu Wang

Beilstein J. Org. Chem. 2016, 12, 22–28, doi:10.3762/bjoc.12.4

• -catalyzed oxyamination reaction remain unclear. In the control experiment with the absence of O-benzoylhydroxylamine, both carboxylic acid and olefin substrates were fully recovered, suggesting the critical role of O-benzoylhydroxylamine in the activation of copper catalyst for the initiation of this