Total synthesis of insect sex pheromones: recent improvements based on iron-mediated cross-coupling chemistry

• Eric Gayon,
• Guillaume Lefèvre,
• Olivier Guerret,
• Adrien Tintar and
• Pablo Chourreu

Beilstein J. Org. Chem. 2023, 19, 158–166, doi:10.3762/bjoc.19.15

• cross-coupling field. Discussion The quest for non-toxic and efficient additives for iron-mediated cross-coupling reactions Co-solvents used as NMP surrogates In spite of the very good yields and soft conditions provided by Cahiez’ method (Scheme 2b), a major drawback of the latter is the requirement of

• quest for suitable additives as surrogates of NMP. Szostak and Bisz reported in 2019 that N-methyl-ε-caprolactame (NMCPL) could be used as an alternative solvent, and sp3–sp2 cross-coupling reactions proceeding with good to excellent yields were reported. Alkyl Grignard reagents could thus be used in

• pheromones involving a key alkyl–alkenyl linkage introduction by iron-catalyzed cross-coupling reactions of α,ω-difunctionalized alkyl Grignard reagents with stereochemically pure dienyl phosphates were successfully performed at higher scales, in order to be successfully implemented in industrial processes

1,4-Dithianes: attractive C2-building blocks for the synthesis of complex molecular architectures

• Bram Ryckaert,
• Ellen Demeyere,
• Frederick Degroote,
• Hilde Janssens and
• Johan M. Winne

Beilstein J. Org. Chem. 2023, 19, 115–132, doi:10.3762/bjoc.19.12

• metalation of 1,4-dithiins affords stable heteroaryl-magnesium and heteroaryl-zinc-like reagents that can be used in coupling reactions at higher temperatures [43][44]. Dithiin-based dienophiles and their use in synthesis [33][49][50][51][52][53][54]. Dithiin-based dienes and their use in synthesis [55][56

• °C and 0 °C, temperatures at which these organometallic reagents are also reported to be quite stable. The zincated dithiins can also be prepared by transmetalation of the magnesiated dithiins at −30 °C, and these organozinc reagents can then be used in room temperature Pd-catalyzed cross-coupling

• reactions, as pseudo-heteroarylzinc reagents. Another example developed by Knochel uses the zincated 1,4-dithiin 22 as a nucleophile to add across the N–O bond in anthranil [44], which spontaneously cyclizes to a heterocycle-fused quinoline via a Friedel–Crafts-type pathway onto the released aldehyde moiety

Practical synthesis of isocoumarins via Rh(III)-catalyzed C–H activation/annulation cascade

• Qian-Ci Gao,
• Yi-Fei Li,
• Jun Xuan and
• Xiao-Qiang Hu

Beilstein J. Org. Chem. 2023, 19, 100–106, doi:10.3762/bjoc.19.10

• , delivering a variety of structurally diverse isocoumarins in an efficient manner (3aa–qa, 43–82%). It is worth mentioning that the tolerance of halogen substituents (Cl, Br and I) may open up a new opportunity for further transition-metal-catalyzed cross-coupling reactions. Sensitive groups, such as ester

• , the reaction of the isocoumarin 3ia with p-toluenesulfonyl hydrazide proceeded smoothly to deliver hydrazone 5 in 66% yield (Scheme 4b, right). Of note, oxime and hydrazone compounds are versatile synthetic building blocks, which have been widely applied in transition-metal-catalyzed cross-coupling

• reactions and radical transformations [36][37][38]. Based on the literature precedents [27] and our previous work [33][34][35], a mechanism for this Rh-catalyzed C–H activation/annulation reaction was proposed and depicted in Scheme 5. In the presence of AgSbF6, dimeric [Cp*RhCl2]2 transforms into the

Organophosphorus chemistry: from model to application

• György Keglevich

Beilstein J. Org. Chem. 2023, 19, 89–90, doi:10.3762/bjoc.19.8

• ” topics of the discipline under discussion. Cross-coupling reactions are also of importance in organophosphorus chemistry. Taddei and co-workers applied an alternative method to the classical Hirao reaction [1]. They utilized the Ni-catalyzed double Michaelis–Arbuzov reaction of bis(bromoaryl) species and

Combining the best of both worlds: radical-based divergent total synthesis

• Kyriaki Gennaiou,
• Antonios Kelesidis,
• Maria Kourgiantaki and
• Alexandros L. Zografos

Beilstein J. Org. Chem. 2023, 19, 1–26, doi:10.3762/bjoc.19.1

• reactions of transition metal hydrides (Fe, Co, Mn, etc) with alkenes (e.g., Mukaiyama hydration) [20]. The last decade saw the development of milder methods for generating carbon-centered radicals as the advancement of their reactivity in cross-coupling reactions, the concept of photoredox catalysis [21

• nickel-mediated decarboxylative Giese reactions and decarboxylative radical zinc-mediated cross-coupling reactions of redox-active esters, established from previous works of the group [27][28], for the key C–C bonds of the diverse congeners. To this end, a hypothetical intermediate 3 was envisioned for

Preparation of β-cyclodextrin-based dimers with selectively methylated rims and their use for solubilization of tetracene

• Konstantin Lebedinskiy,
• Volodymyr Lobaz and
• Jindřich Jindřich

Beilstein J. Org. Chem. 2022, 18, 1596–1606, doi:10.3762/bjoc.18.170

• silyl groups. Both other reagents used for the cleavage in CD chemistry (TBAF and BF3.Et2O) yielded byproducts that unnecessarily complicated the purification. The CuAAC "click reaction" in CD chemistry is also a well-known approach, allowing coupling reactions of azido-containing CDs with different

Formal total synthesis of macarpine via a Au(I)-catalyzed 6-endo-dig cycloisomerization strategy

• Jiayue Fu,
• Bingbing Li,
• Zefang Zhou,
• Maosheng Cheng,
• Lu Yang and
• Yongxiang Liu

Beilstein J. Org. Chem. 2022, 18, 1589–1595, doi:10.3762/bjoc.18.169

• . The convergent synthetic strategies feature the utilization of Au(I)-catalyzed cycloisomerizations of a 1,5-enyne and alkynyl ketone substrates, which were prepared by Sonogashira coupling reactions. Keywords: benzo[c]phenanthridine alkaloids; 1,5-enyne; formal total synthesis; gold catalysis

Functionalization of imidazole N-oxide: a recent discovery in organic transformations

• Koustav Singha,
• Imran Habib and
• Mossaraf Hossain

Beilstein J. Org. Chem. 2022, 18, 1575–1588, doi:10.3762/bjoc.18.168

• , like cycloaddition, metal-free coupling reactions, three-component or multicomponent reactions etc., which use N-oxide chemistry. In 2021 Timofey D. Moseev and co-workers unfolded an attractive procedure of the coupling reaction between 2H-imidazole 1-oxides and polyphenols under metal-free conditions

• the past years are discussed. This review contains cycloaddition reactions, nucleophilic halogenation reactions, metal-free coupling reactions, formation of N-heterocyclic carbenes, and multicomponent reactions, mainly three-component reactions. The mentioned methodologies have been performed by

Simple synthesis of multi-halogenated alkenes from 2-bromo-2-chloro-1,1,1-trifluoroethane (halothane)

• Yukiko Karuo,
• Atsushi Tarui,
• Kazuyuki Sato,
• Kentaro Kawai and
• Masaaki Omote

Beilstein J. Org. Chem. 2022, 18, 1567–1574, doi:10.3762/bjoc.18.167

• difluoroalkyl ethers (1), along with small amounts of fluoroalkenyl ethers (2), which were obtained from 1 via an E2-elimination mechanism (Scheme 1B) [14][15]. The fluoroalkenyl group in 2 is a potentially useful moiety that could participate in cross-coupling reactions for replacement of the bromine atom with

• presence of KOH. In this reaction, halothane plays a key role in the construction of highly halogenated and structurally intriguing products. The tri-halogenated alkenyl ether has potential applications in organic chemistry, e.g., in Suzuki–Miyaura or Sonogashira cross-coupling reactions. Further

An alternative C–P cross-coupling route for the synthesis of novel V-shaped aryldiphosphonic acids

• Stephen J. I. Shearan,
• Enrico Andreoli and
• Marco Taddei

Beilstein J. Org. Chem. 2022, 18, 1518–1523, doi:10.3762/bjoc.18.160

• aryl halides and trialkyl phosphites [23]. Some of the most studied C–P coupling reactions involving aryl substrates are those employing catalysts, which are required in order to lower the energy barrier of the reaction and overcome the poor reactivity between aryl halides and trialkyl phosphites [24

• ][25][26]. These catalytic cross-coupling reactions tend to follow similar pathways to the Michaelis–Arbuzov reaction, with the inclusion of a catalytic intermediate step. A number of suitable catalysts have been identified, ranging from nickel(II) bromide and nickel(II) chloride, to palladium(II

• the time. In Table 1, we see a range of different methods based on cross-coupling reactions compared to the method proposed in this work. The first, and one of the most important comparisons, is time. The upper range for our method is in the 5.5 hour mark, whereas most of the literature routes run for

One-pot synthesis of 2-arylated and 2-alkylated benzoxazoles and benzimidazoles based on triphenylbismuth dichloride-promoted desulfurization of thioamides

• Arisu Koyanagi,
• Yuki Murata,
• Shiori Hayakawa,
• Mio Matsumura and
• Shuji Yasuike

Beilstein J. Org. Chem. 2022, 18, 1479–1487, doi:10.3762/bjoc.18.155

• cyclopropanes with arenes [29]. They have also been used in Pd-catalyzed cross-coupling reactions to react with hypervalent iodonium salts, organostananes, and vinyl epoxides [30][31][32]. Moreover, there are reports of them serving as oxidizing agents for alcohols [33]. Two papers have recently reported

Dissecting Mechanochemistry III

• Lars Borchardt and
• José G. Hernández

Beilstein J. Org. Chem. 2022, 18, 1454–1456, doi:10.3762/bjoc.18.150

• intermolecular C–N coupling reactions using DDQ as an oxidant.

On drug discovery against infectious diseases and academic medicinal chemistry contributions

• Yves L. Janin

Beilstein J. Org. Chem. 2022, 18, 1355–1378, doi:10.3762/bjoc.18.141

• , parallel/combinatorial synthesis, multicomponent chemistry, metal-catalyzed coupling reactions as well as NMR, preparative/analytical liquid chromatography and mass spectrometry). – An improved understanding of molecular pharmacology along with in vitro or in vivo assays to detect various aspects of drug

Synthesis and electrochemical properties of 3,4,5-tris(chlorophenyl)-1,2-diphosphaferrocenes

• Almaz A. Zagidullin,
• Farida F. Akhmatkhanova,
• Mikhail N. Khrizanforov,
• Robert R. Fayzullin,
• Tatiana P. Gerasimova,
• Ilya A. Bezkishko and
• Vasili A. Miluykov

Beilstein J. Org. Chem. 2022, 18, 1338–1345, doi:10.3762/bjoc.18.139

• transition metal-catalyzed cross-coupling reactions broadly used for the preparation of different diarylacetylenes and, rarely, bis(chlorophenyl)acetylenes. Next, starting substituted benzaldehydes were treated with an excess of SOCl2 for 24 h at 25 °C. Corresponding substituted benzal chlorides 4 were

Make or break: the thermodynamic equilibrium of polyphosphate kinase-catalysed reactions

• Michael Keppler,
• Sandra Moser,
• Henning J. Jessen,
• Christoph Held and
• Jennifer N. Andexer

Beilstein J. Org. Chem. 2022, 18, 1278–1288, doi:10.3762/bjoc.18.134

• of the enzymes and their thermodynamic reaction course is of need, especially in comparison to other kinases. Here, we tested four PPKs from different organisms under the same conditions without any coupling reactions. In comparison to other kinases using phosphate donors with comparably higher

Modular synthesis of 2-furyl carbinols from 3-benzyldimethylsilylfurfural platforms relying on oxygen-assisted C–Si bond functionalization

• Sebastien Curpanen,
• Per Reichert,
• Gabriele Lupidi,
• Giovanni Poli,
• Julie Oble and
• Alejandro Perez-Luna

Beilstein J. Org. Chem. 2022, 18, 1256–1263, doi:10.3762/bjoc.18.131

• -catalyzed cross-coupling reactions, such as arylation reactions catalyzed by Pd2(dba)3/CuI, as well as allylation and methylation reactions catalyzed by CuI⋅PPh3. C3-Benzyldimethylsilyl-appended furfurals are thus introduced as versatile platforms, providing a modular access to 3-substituted 2-furyl

• (as for substrates with pending hydroxy units) [32][33][34][35]. To the best of our knowledge, no analogous cross-coupling reactions from aryl- or heteroaryl-substituted benzyldimethylsilanes have been disclosed. We were thus delighted to find that using Pd2(dba)3 as precatalyst (2.5 mol %) in

• under the same reaction conditions led predominantly to decomposition products and only 5-methylfurfural (resulting from protodesilylation) was recovered in low yield (≈20%). Hence, intramolecular hydroxy activation seems decisive to obtain productive cross-coupling reactions with this system. Also, it

Derivatives of benzo-1,4-thiazine-3-carboxylic acid and the corresponding amino acid conjugates

• Péter Kisszékelyi,
• Tibor Peňaška,
• Klára Stankovianska,
• Mária Mečiarová and
• Radovan Šebesta

Beilstein J. Org. Chem. 2022, 18, 1195–1202, doi:10.3762/bjoc.18.124

• (see Supporting Information File 1 for detailed reaction conditions) since decomposition of the benzothiazine core was observed in all coupling reactions. To avoid the issues related to the instable benzothiazine ring, we explored other possible linear reaction routes (Scheme 4) as an alternative to

Electrogenerated base-promoted cyclopropanation using alkyl 2-chloroacetates

• Kouichi Matsumoto,
• Yuta Hayashi,
• Kengo Hamasaki,
• Mizuki Matsuse,
• Hiyono Suzuki,
• Keiji Nishiwaki and
• Norihito Kawashita

Beilstein J. Org. Chem. 2022, 18, 1116–1122, doi:10.3762/bjoc.18.114

• (benzyltriethylammonium chloride) produced triethyl cyclopropane-1,2,3-tricarboxylate in 62% yield (Scheme 1, reaction 2) [11]. Both procedures are two-component coupling reactions. In contrast, a method involving a one-component reaction using alkyl 2-haloacetate has been developed by Abushanab in 1967, in which a

A Streptomyces P450 enzyme dimerizes isoflavones from plants

• Run-Zhou Liu,
• Shanchong Chen and
• Lihan Zhang

Beilstein J. Org. Chem. 2022, 18, 1107–1115, doi:10.3762/bjoc.18.113

• , which extends the insights into P450-mediated biaryl coupling reactions in biosynthesis. Keywords: biaryl coupling; cytochrome P450; dimerization; isoflavone; natural product; Introduction Dimerization is a ubiquitous biotransformation in nature. Almost all forms of life, including bacteria, fungi

• and identified the P450 enzyme CYP158C1 to be able to catalyze biaryl coupling reactions using plant-derived daidzein (4) as a substrate. The enzyme can dimerize various flavonoids and provides a potential synthetic tool for the dimerization of aromatic polyketides. Experimental General experimental

Electrochemical formal homocoupling of sec-alcohols

• Kosuke Yamamoto,
• Kazuhisa Arita,
• Masashi Shiota,
• Masami Kuriyama and
• Osamu Onomura

Beilstein J. Org. Chem. 2022, 18, 1062–1069, doi:10.3762/bjoc.18.108

• ]. Such scaffolds are widely utilized as versatile building blocks in the synthesis of biologically active compounds [3][4][5][6][7], chiral auxiliaries [8][9], and chiral ligands [10][11][12][13]. Traditional pinacol coupling reactions are performed with a stoichiometric or even excess amount of low

• catalytic amount of transition-metal reductants have been developed, but stoichiometric silicon electrophiles and co-reductants such as Zn were commonly required to complete the catalytic cycle [14]. More recently, visible light-mediated pinacol coupling reactions have been disclosed by several groups [15

Automated grindstone chemistry: a simple and facile way for PEG-assisted stoichiometry-controlled halogenation of phenols and anilines using N-halosuccinimides

• Dharmendra Das,
• Akhil A. Bhosle,
• Amrita Chatterjee and
• Mainak Banerjee

Beilstein J. Org. Chem. 2022, 18, 999–1008, doi:10.3762/bjoc.18.100

• halides are valuable compounds with potent bioactivities [1][2][3][4][5] (Figure 1) and are utilized as crucial precursors for various metal-catalyzed cross-coupling reactions [6][7][8][9]. They are frequently used as synthetic intermediates in several value-added syntheses of natural products

• of monoiodo derivatives was successfully prepared in high to excellent yields from phenols and anilines by adding 1.1 equiv of NIS with PEG-400 as the LAG agent (product 2aa–ag, Scheme 3). Notably, both Br- and I-substituents are mainly used as the substrates for cross-coupling reactions indicating

Palladium-catalyzed solid-state borylation of aryl halides using mechanochemistry

• Koji Kubota,
• Emiru Baba,
• Tamae Seo,
• Tatsuo Ishiyama and
• Hajime Ito

Beilstein J. Org. Chem. 2022, 18, 855–862, doi:10.3762/bjoc.18.86

• transformations. Thus far, mechanochemical palladium-catalyzed cross-coupling reactions such as Suzuki–Miyaura [34][35][36][37][38][39][40][41][42][43][44][45][46][47], Buchwald–Hartwig [48][49][50][51][52], Sonogashira [53][54][55][56], Negishi [57], Mizoroki–Heck [58][59][60], and C–S bond-forming [61

• ] reactions have been developed. Our group has also been interested in this class of mechanochemical transformations, particularly in the development of cross-coupling reactions that proceed in the solid state [43][44][45][46][47][48][49][50]. These mechanochemical cross-coupling reactions often show much

Inductive heating and flow chemistry – a perfect synergy of emerging enabling technologies

• Conrad Kuhwald,
• Sibel Türkhan and
• Andreas Kirschning

Beilstein J. Org. Chem. 2022, 18, 688–706, doi:10.3762/bjoc.18.70

• decarboxylation of the malonic acid derivative 42 to give pent-4-enecarboxylic acid (43). In many cases, the flow protocol provided improved yields compared to the corresponding batch syntheses. Palladium-catalyzed cross-coupling reactions require higher temperatures and thus can be realized in an inductively

• catalysis can be generated directly by the functionalized nanostructured particles (Scheme 12, case C) [50]. This was achieved by reductive precipitation of Pd(0) nanoparticles from ammonium-bound tetrachloropalladate [84][85], which showed good catalytic activity in various cross-coupling reactions under

Mechanochemical halogenation of unsymmetrically substituted azobenzenes

• Dajana Barišić,
• Mario Pajić,
• Ivan Halasz,
• Darko Babić and
• Manda Ćurić

Beilstein J. Org. Chem. 2022, 18, 680–687, doi:10.3762/bjoc.18.69

• -coupling reactions [9][10][11][12][13][14][15][16][17][18][19] or components of pharmaceuticals and biologically active molecules [20][21]. The synthetic aspects of both approaches in solution are well established. The need for green and sustainable chemistry [22] has led to the development and synthetic

DDQ in mechanochemical C–N coupling reactions

• Shyamal Kanti Bera,
• Rosalin Bhanja and
• Prasenjit Mal

Beilstein J. Org. Chem. 2022, 18, 639–646, doi:10.3762/bjoc.18.64

• as C–P [17], C–O [18][19][20], and C–S [21] were achieved using DDQ as an oxidant [22][23]. In addition, the utilization of DDQ as a photoredox catalyst [24] and co-catalyst [25][26] have also been documented in organic synthesis [27]. DDQ-mediated oxidative C–N cross-coupling reactions are well

• known, but limited reports are available for reactions carried out under solvent-free conditions [28][29]. However, improving environmentally benign methods [30][31] of C–N bond synthesis is of enormous significance [32][33][34]. In comparison to the metal-mediated C–N coupling reactions [35], the

• direct C–H amination is vital to provide many amine derivatives by sustainable methods [36][37]. The dehydrogenative C–N cross-coupling reactions from unreactive N–H and C–H bonds can lead to various nitrogen-containing heterocycles [32][38]. Herein, we disclose the DDQ-mediated oxidative C–N coupling