Solvent-free copper-catalyzed click chemistry for the synthesis of N-heterocyclic hybrids based on quinoline and 1,2,3-triazole

• Martina Tireli,
• Silvija Maračić,
• Stipe Lukin,
• Marina Juribašić Kulcsár,
• Dijana Žilić,
• Mario Cetina,
• Ivan Halasz,
• Silvana Raić-Malić and
• Krunoslav Užarević

Beilstein J. Org. Chem. 2017, 13, 2352–2363, doi:10.3762/bjoc.13.232

• methine C-3 protons displayed in a 1H,1H-NOESY spectrum of 4 (Figure S10 in Supporting Information File 1). Compound 4 was then submitted to Cu(I)-catalyzed 1,3-dipolar cycloaddition with selected halogen-substituted and non-substituted aromatic azides to yield target N-heterocyclic hybrids 5–8 containing

Homologated amino acids with three vicinal fluorines positioned along the backbone: development of a stereoselective synthesis

• Raju Cheerlavancha,
• Ahmed Ahmed,
• Yun Cheuk Leung,
• Aggie Lawer,
• Qing-Quan Liu,
• Marina Cagnes,
• Hee-Chan Jang,
• Xiang-Guo Hu and
• Luke Hunter

Beilstein J. Org. Chem. 2017, 13, 2316–2325, doi:10.3762/bjoc.13.228

• (right) has a bent shape which provides gauche alignments between all pairs of vicinal C–F and C–N bonds, whilst avoiding any 1,3-dipolar repulsions [11][12][43]. The observed J values for the all-syn trifluoro amino acid 6b also allowed its solution conformation to be deduced (Figure 2). The J values

• C–F and C–N bonds, whilst avoiding 1,3-dipolar repulsion [11][12][43]. The second suggested conformer of 6b (right) has an extended zigzag structure. This geometry is counterintuitive, because although it provides gauche alignments between all pairs of vicinal C–F and C–N bonds, it includes an

Dialkyl dicyanofumarates and dicyanomaleates as versatile building blocks for synthetic organic chemistry and mechanistic studies

• Grzegorz Mlostoń and
• Heinz Heimgartner

Beilstein J. Org. Chem. 2017, 13, 2235–2251, doi:10.3762/bjoc.13.221

• isomeric homo-Diels–Alder adducts were found in the mixture. [3 + 2]-Cycloadditions (1,3-dipolar cycloadditions) Electron-rich 1,3-dipoles such as thiocarbonyl S-methanides and azomethine ylides react with dipolarophiles E-1 and Z-1 to give five-membered cycloadducts through stepwise zwitterionic reaction

Mechanochemical synthesis of small organic molecules

• Tapas Kumar Achar,
• Anima Bose and
• Prasenjit Mal

Beilstein J. Org. Chem. 2017, 13, 1907–1931, doi:10.3762/bjoc.13.186

• -Triazoles have important applications in pharmaceutical chemistry [150] and traditionally they are prepared by 1,3-dipolar cycloaddition reactions at high temperature, long reaction times and produce low yield with multiple products [151]. In 2013, Ranu and co-workers reported mechanochemical synthesis of

A novel application of 2-silylated 1,3-dithiolanes for the synthesis of aryl/hetaryl-substituted ethenes and dibenzofulvenes

• Grzegorz Mlostoń,
• Paulina Pipiak,
• Róża Hamera-Fałdyga and
• Heinz Heimgartner

Beilstein J. Org. Chem. 2017, 13, 1900–1906, doi:10.3762/bjoc.13.185

• presented protocol offers a new, highly efficient approach to tetrasubstituted ethenes and dibenzofulvenes bearing aryl and/or hetaryl substituents. Keywords: diazomethanes; 1,3-dipolar cycloadditions; olefination reactions; reaction mechanisms; thioketones; Introduction Aryl and hetaryl-substituted

Synthesis and metal binding properties of N-alkylcarboxyspiropyrans

• Alexis Perry and
• Christina J. Kousseff

Beilstein J. Org. Chem. 2017, 13, 1542–1550, doi:10.3762/bjoc.13.154

• previously reported [28]. Presumably, this reaction proceeds via azomethine ylid 6 (Scheme 3); analogous indolium ylids have been used synthetically in 1,3-dipolar cycloadditions [29] and mechanistic studies have been published on the related decarboxylation of pyridinium 2-carboxylates [30]. Fortunately, α

Synthesis of oligonucleotides on a soluble support

• Harri Lönnberg

Beilstein J. Org. Chem. 2017, 13, 1368–1387, doi:10.3762/bjoc.13.134

• support (Scheme 3) [42]. Owing to the symmetrical structure of the support, NMR and mass spectroscopic characterization is possible at any stage of the chain assembly. The 3´-terminal nucleoside was immobilized to this support as a 3´-O-(4-pentynoyl) derivative by Cu(I)-catalyzed 1,3-dipolar cycloaddition

BODIPY-based fluorescent liposomes with sesquiterpene lactone trilobolide

• Ludmila Škorpilová,
• Silvie Rimpelová,
• Michal Jurášek,
• Miloš Buděšínský,
• Jana Lokajová,
• Roman Effenberg,
• Petr Slepička,
• Tomáš Ruml,
• Eva Kmoníčková,
• Pavel B. Drašar and
• Zdeněk Wimmer

Beilstein J. Org. Chem. 2017, 13, 1316–1324, doi:10.3762/bjoc.13.128

• compound is shown in Scheme 1, part B. Propargyl-ChL [35] was introduced into Huisgen copper-catalyzed 1,3-dipolar cycloaddition [36] (CuAAC) with BODIPY 3. This microwave-assisted reaction catalyzed by CuSO4·5H2O, sodium ascorbate and a catalytic amount of TBTA (tris[(1-benzyl-1H-1,2,3-triazol-4-yl)methyl

An eco-compatible strategy for the diversity-oriented synthesis of macrocycles exploiting carbohydrate-derived building blocks

• Sushil K. Maurya and
• Rohit Rana

Beilstein J. Org. Chem. 2017, 13, 1106–1118, doi:10.3762/bjoc.13.110

• blocks were coupled via 1,3-dipolar cycloaddition (click reaction) iteratively through the development of a greener base-free Cu(I)-catalyzed azide–alkyne cycloaddition reaction. The cycloadducts were then converted to macrocycles by Ru-catalyzed cyclization reaction using greener and non-hazards

New approach toward the synthesis of deuterated pyrazolo[1,5-a]pyridines and 1,2,4-triazolo[1,5-a]pyridines

• Aleksey Yu. Vorob’ev,
• Vyacheslav I. Supranovich,
• Gennady I. Borodkin and
• Vyacheslav G. Shubin

Beilstein J. Org. Chem. 2017, 13, 800–805, doi:10.3762/bjoc.13.80

• and a high degree of deuterium incorporation were achieved. The procedure was applied for several 4-R-1-aminopyridinium cations (R = H, Me, OMe). Keywords: deuteration; 1,3-dipolar cycloaddition; pyrazolo[1,5-a]pyridine; 1,2,4-triazolo[1,5-a]pyridine; Introduction Isotopically labeled compounds find

Synthesis of ribavirin 2’-Me-C-nucleoside analogues

• Fanny Cosson,
• Aline Faroux,
• Jean-Pierre Baltaze,
• Jonathan Farjon,
• Régis Guillot,
• Jacques Uziel and
• Nadège Lubin-Germain

Beilstein J. Org. Chem. 2017, 13, 755–761, doi:10.3762/bjoc.13.74

• carbon atom in the 2’-position are an indium-mediated alkynylation and a 1,3-dipolar cyclization. Keywords: alkynylation; antiviral; cancer; C-nucleosides; ribavirin; Introduction The triazole nucleoside ribavirin (RBV, Figure 1) is used for the treatment of a number of viral infections and may be

• as for the non-methylated derivative [21]. Then, the 1,3-dipolar cycloaddition reaction of 6 with benzyl azide in toluene at 70 °C led to a mixture of regioisomeric triazoles 7 in a 42:58 ratio. The removal of all protecting groups was achieved by treatment of compounds 7 with ammonia followed by

Ultrasound-promoted organocatalytic enamine–azide [3 + 2] cycloaddition reactions for the synthesis of ((arylselanyl)phenyl-1H-1,2,3-triazol-4-yl)ketones

• Gabriel P. Costa,
• Natália Seus,
• Juliano A. Roehrs,
• Raquel G. Jacob,
• Ricardo F. Schumacher,
• Thiago Barcellos,
• Rafael Luque and
• Diego Alves

Beilstein J. Org. Chem. 2017, 13, 694–702, doi:10.3762/bjoc.13.68

• most attractive way for their preparation is the thermal 1,3-dipolar cycloaddition of alkynes and azides, introduced by Huisgen which usually gives rise to a mixture of 1,4 and 1,5-isomers [16][17][18][19]. More recently, transition metal catalysts based on copper, ruthenium, silver and iridium salts

• carbonyl compounds could successfully generate an enamine or an enolate, and these species react as dipolarophiles with organic azides in organocatalyzed 1,3-dipolar cycloadditions. Our research group has demonstrated β-enamine–azide cycloaddition reactions for the synthesis of selenium-functionalized

Isoxazole derivatives as new nitric oxide elicitors in plants

• Anca Oancea,
• Emilian Georgescu,
• Florentina Georgescu,
• Alina Nicolescu,
• Elena Iulia Oprita,
• Catalina Tudora,
• Lucian Vladulescu,
• Marius-Constantin Vladulescu,
• Florin Oancea and
• Calin Deleanu

Beilstein J. Org. Chem. 2017, 13, 659–664, doi:10.3762/bjoc.13.65

• were obtained in good yields by regiospecific 1,3-dipolar cycloaddition reactions between aromatic nitrile oxides, generated in situ from the corresponding hydroxyimidoyl chlorides, with non-symmetrical activated alkynes in the presence of catalytic amounts of copper(I) iodide. Effects of 3,5

• -disubstituted isoxazoles on nitric oxide and reactive oxygen species generation in Arabidopsis tissues was studied using specific diaminofluoresceine dyes as fluorescence indicators. Keywords: chemical elicitor; 1,3-dipolar cycloaddition; isoxazole; nitric oxide; nitrile oxide; reactive oxygen species

• synthetic approaches towards the isoxazole core include the reactions of hydroxylamine with aryl-β-diketones [20], α,β-unsaturated carbonyl compounds [21], or α,β-unsaturated nitriles [22], and 1,3-dipolar cycloaddition reactions between alkenes or alkynes and nitrile oxides [23][24][25]. Nitrile oxides are

Dimerization reactions of aryl selenophen-2-yl-substituted thiocarbonyl S-methanides as diradical processes: a computational study

• Michael L. McKee,
• Grzegorz Mlostoń,
• Katarzyna Urbaniak and
• Heinz Heimgartner

Beilstein J. Org. Chem. 2017, 13, 410–416, doi:10.3762/bjoc.13.44

• intermediate, delocalized diradical species. The influence of selenium as a ‘heavy atom’ for stabilization of this intermediate has been emphasized. Keywords: 1,3-dipolar cycloadditions; reaction mechanisms; reactive intermediates; thiocarbonyl S-methanides; thioketones; Introduction Thiocarbonyl S

• -methanides 1 belong to the class of S-centered 1,3-dipolar species, which were identified by Huisgen as reactive intermediates formed via nitrogen extrusion from 2,5-dihydro-1,3,4-thiadiazoles 2 [1][2]. In spite of the fact that several methods are reported for the preparation of these precursors, the most

• (tetrahydrothiophenes) [6]. In the absence of a suitable dipolarophile, thiocarbonyl S-methanides 1 undergo either 1,3-dipolar electrocyclizations to give the isomeric thiiranes 3 or dimerize leading to five- or six-membered S-heterocycles (Scheme 1) [1][2]. The type of the dimeric product depends on the substituents

A postsynthetically 2’-“clickable” uridine with arabino configuration and its application for fluorescent labeling and imaging of DNA

• Heidi-Kristin Walter,
• Bettina Olshausen,
• Ute Schepers and
• Hans-Achim Wagenknecht

Beilstein J. Org. Chem. 2017, 13, 127–137, doi:10.3762/bjoc.13.16

• cells. Keywords: dyes; fluorescence; nucleic acid; oligonucleotide; Introduction The “click”-type reactions [1], in particular the 1,3-dipolar cycloaddition between alkynes and azides (CuAAC) is a broadly applied strategy for postsynthetic oligonucleotide modification since both reactive groups are

Multicomponent synthesis of spiropyrrolidine analogues derived from vinylindole/indazole by a 1,3-dipolar cycloaddition reaction

• Manjunatha Narayanarao,
• Lokesh Koodlur,
• Vijayakumar G. Revanasiddappa,
• Subramanya Gopal and
• Susmita Kamila

Beilstein J. Org. Chem. 2016, 12, 2893–2897, doi:10.3762/bjoc.12.288

• -pot multicomponent synthesis. The method uses the 1,3-dipolar cycloaddition reaction between N-alkylvinylindole/indazole and azomethine ylides, prepared in situ from cyclic/acyclic amino acids. The 1,3-dipolar cycloaddition proceeds efficiently under thermal conditions to afford the regio- and

• of biological importance [1][2]. The regio- and stereoselective construction of spiro compounds by utilizing the 1,3-dipolar cycloaddition reaction of azomethine ylides has been reported [3][4][5][6]. However, unlike the previous reports, the present method is concise and facilitates the one-pot

• synthesis of multifunctionalized spiranes. The earlier works reveal the use of different reaction conditions to prepare functionalized spiroindane, spiropyrolidine, spiropyrrolizidine and spirooxindole derivatives. Among them, the 1,3-dipolar cycloaddition based route is preferred due to multiple advantages

Synthesis of spiro[isoindole-1,5’-isoxazolidin]-3(2H)-ones as potential inhibitors of the MDM2-p53 interaction

• Salvatore V. Giofrè,
• Santa Cirmi,
• Raffaella Mancuso,
• Francesco Nicolò,
• Giuseppe Lanza,
• Laura Legnani,
• Agata Campisi,
• Maria A. Chiacchio,
• Michele Navarra,
• Bartolo Gabriele and
• Roberto Romeo

Beilstein J. Org. Chem. 2016, 12, 2793–2807, doi:10.3762/bjoc.12.278

• Farmaco, Università di Catania, Viale A. Doria, 95100 Catania, Italy Dipartimento di Chimica, Università di Pavia, Via Taramelli 12, 27100 Pavia, Italy 10.3762/bjoc.12.278 Abstract A series of spiro[isoindole-1,5-isoxazolidin]-3(2H)-ones has been synthesized by 1,3-dipolar cycloaddition of N

• be linked to the inhibition of the protein–protein p53-MDM2 interaction. Docking measurements support the biological data. Keywords: antitumor agents; DFT studies; 1,3-dipolar cycloaddition; docking studies; spiro-compounds; Introduction The p53 tumor suppressor protein is a transcriptional factor

• construction of the spiro[isoxazolidin-isoindolinone] system. The synthetic scheme (Figure 2) exploits the strategy of the 1,3-dipolar cycloaddition of nitrones on the substrate isoindolin-3-methylene-1-one 2, obtained by a recent methodology of a PdI2 catalyzed aminocarbonylation-N-heterocyclization of 2

A versatile route to polythiophenes with functional pendant groups using alkyne chemistry

• Xiao Huang,
• Li Yang,
• Rikard Emanuelsson,
• Jonas Bergquist,
• Maria Strømme,
• Martin Sjödin and
• Adolf Gogoll

Beilstein J. Org. Chem. 2016, 12, 2682–2688, doi:10.3762/bjoc.12.265

• Huisgen 1,3-dipolar cycloaddition between N-(2-azidoethyl)phthalimide and the alkyne terminal of pyEDOT under ultrasound conditions in 73% yield. Detailed synthetic routes are presented in Supporting Information File 1. Figure 1a shows the cyclic voltammograms (CVs) for electrochemical polymerization of

Development of a continuous process for α-thio-β-chloroacrylamide synthesis with enhanced control of a cascade transformation

• Olga C. Dennehy,
• Valérie M. Y. Cacheux,
• Benjamin J. Deadman,
• Denis Lynch,
• Stuart G. Collins,
• Humphrey A. Moynihan and
• Anita R. Maguire

Beilstein J. Org. Chem. 2016, 12, 2511–2522, doi:10.3762/bjoc.12.246

• ] and 1,3-dipolar cycloadditions [6][7][8][9], and oxidation of the sulfide group [10][11][12] are among a wide array of transformations which have been successfully applied to these compounds (Scheme 1). In order to fully exploit the synthetic potential of these β-chloroacrylamides, however, a means of

Sydnone C-4 heteroarylation with an indolizine ring via Chichibabin indolizine synthesis

• Florin Albota,
• Mino R. Caira,
• Constantin Draghici,
• Florea Dumitrascu and
• Denisa E. Dumitrescu

Beilstein J. Org. Chem. 2016, 12, 2503–2510, doi:10.3762/bjoc.12.245

• other metals and represent a versatile tool for obtaining hybrid heterocycles with properties that are useful for the development of new advanced materials and for medicinal purposes [1][2][3][4]. Recently, we obtained, by 1,3-dipolar cycloaddition reactions of sydnone-ylides as bis(1,3-dipoles) with

• interesting chemical reactions of sydnones are their electrophilic substitution at C-4 and their participation in 1,3-dipolar cycloaddition reactions with olefinic and acetylenic dipolarophiles to form pyrazoles and functional transformation at C-4 [20][21][22][23][24][25][26]. Herein we present the synthesis

• of indolizines 4 (Figure 1) with the indolizine directly attached to C-4 of a sydnone ring by the indolizine Chichibabin approach. In addition, the new indolizine structures 5, connected through a keto group to a sydnone ring, were prepared by 1,3-dipolar cycloaddition reaction starting from the same

Synthesis, dynamic NMR characterization and XRD studies of novel N,N’-substituted piperazines for bioorthogonal labeling

• Constantin Mamat,
• Marc Pretze,
• Matthew Gott and
• Martin Köckerling

Beilstein J. Org. Chem. 2016, 12, 2478–2489, doi:10.3762/bjoc.12.242

• to demonstrate the Cu-catalyzed azide–alkyne click reaction (Huisgen 1,3-dipolar cycloaddition) and the traceless Staudinger ligation, a proof of concept study was performed for the site-selective labeling of a pharmacologically active peptide and a small organic compound. These compounds provide the

Combined experimental and theoretical studies of regio- and stereoselectivity in reactions of β-isoxazolyl- and β-imidazolyl enamines with nitrile oxides

• Ilya V. Efimov,
• Marsel Z. Shafikov,
• Nikolai A. Beliaev,
• Natalia N. Volkova,
• Tetyana V. Beryozkina,
• Wim Dehaen,
• Zhijin Fan,
• Viktoria V. Grishko,
• Gert Lubec,
• Pavel A. Slepukhin and
• Vasiliy A. Bakulev

Beilstein J. Org. Chem. 2016, 12, 2390–2401, doi:10.3762/bjoc.12.233

• 4i), respectively. The regio- and stereospecificity and the apparent reaction rate increase by the introduction of electron-withdrawing substituents into the benzonitrile oxide structure, allow to presume that the reaction of enamines with nitrile oxides can be described as 1,3-dipolar cycloadditions

• nitrile oxides as inverse electron-demand 1,3-dipolar cycloaddition. The found stereoselectivity of the cycloaddition is driven by the higher stability of the E-isomer of the starting enamine, whereas the regioselectivity is controlled by better orbital overlap in the transition state leading to the

An effective one-pot access to polynuclear dispiroheterocyclic structures comprising pyrrolidinyloxindole and imidazothiazolotriazine moieties via a 1,3-dipolar cycloaddition strategy

• Alexei N. Izmest’ev,
• Galina A. Gazieva,
• Natalya V. Sigay,
• Sergei A. Serkov,
• Valentina A. Karnoukhova,
• Vadim V. Kachala,
• Alexander S. Shashkov,
• Igor E. Zanin,
• Angelina N. Kravchenko and
• Nina N. Makhova

Beilstein J. Org. Chem. 2016, 12, 2240–2249, doi:10.3762/bjoc.12.216

• -triazine moieties has been developed. The method relies on a 1,3-dipolar cycloaddition of azomethine ylides generated in situ from isatin derivatives and sarcosine to 6-benzylideneimidazo[4,5-e]thiazolo[3,2-b]-1,2,4-triazine-2,7-diones. Keywords: azomethine ylides; cycloaddition; diastereoselectivity

• constructing complex N-heterocyclic systems in a regio and stereocontrolled fashion is the 1,3-dipolar cycloaddition of azomethine ylides to electron-deficient alkenes as dipolarophiles [2][3][4][5][6][7][8]. The in situ preparation of azomethine ylides from different carbonyl and amino components makes the

• cycloaddition one of the most valuable means of combinatorial chemistry. Such multicomponent reactions are characterized by productivity, operational simplicity, and efficiency [9][10][11][12][13]. A highly interesting class of heterocycles which is accessible through 1,3-dipolar cycloaddition reactions are

Beta-hydroxyphosphonate ribonucleoside analogues derived from 4-substituted-1,2,3-triazoles as IMP/GMP mimics: synthesis and biological evaluation

• Tai Nguyen Van,
• Audrey Hospital,
• Corinne Lionne,
• Lars P. Jordheim,
• Charles Dumontet,
• Christian Périgaud,
• Laurent Chaloin and
• Suzanne Peyrottes

Beilstein J. Org. Chem. 2016, 12, 1476–1486, doi:10.3762/bjoc.12.144

• synthesis of 1,2,3-triazolonucleotides (1a–o, Figure 1) was envisaged using the Huisgen 1,3-dipolar cycloaddition of the azido-sugar-phosphonate key-intermediate 2 (Scheme 1) and selected commercially available alkynes. Thus, (1-azido-2,5-di-O-acetyl-3-O-benzoyl-6-deoxy-6-diethylphosphono)-β-ribo-(5S

Synthesis of ferrocenyl-substituted 1,3-dithiolanes via [3 + 2]-cycloadditions of ferrocenyl hetaryl thioketones with thiocarbonyl S-methanides

• Grzegorz Mlostoń,
• Róża Hamera-Fałdyga,
• Anthony Linden and
• Heinz Heimgartner

Beilstein J. Org. Chem. 2016, 12, 1421–1427, doi:10.3762/bjoc.12.136

• [3 + 2]-cycloadditions. The high reactivity of ferrocenyl thioketones is demonstrated by the fact that no products of competitive reactions, such as dimerization of the intermediate 1,3-dipole or 1,3-dipolar electrocyclizations, were observed. Based on these observations one can expect that