Synthesis of ribavirin 2’-Me-C-nucleoside analogues

• Fanny Cosson,
• Aline Faroux,
• Jean-Pierre Baltaze,
• Jonathan Farjon,
• Régis Guillot,
• Jacques Uziel and
• Nadège Lubin-Germain

Beilstein J. Org. Chem. 2017, 13, 755–761, doi:10.3762/bjoc.13.74

• as for the non-methylated derivative [21]. Then, the 1,3-dipolar cycloaddition reaction of 6 with benzyl azide in toluene at 70 °C led to a mixture of regioisomeric triazoles 7 in a 42:58 ratio. The removal of all protecting groups was achieved by treatment of compounds 7 with ammonia followed by

• differentiate the 2’ position. After the indium-mediated alkynylation, the obtained alkynyl riboside 8 was submitted to a Huisgen cycloaddition reaction with benzyl azide, under the same conditions as in the previous case, affording the mixture of regioisomeric triazoles 9a and 9b in a 37:63 ratio [14] (Scheme

Ultrasound-promoted organocatalytic enamine–azide [3 + 2] cycloaddition reactions for the synthesis of ((arylselanyl)phenyl-1H-1,2,3-triazol-4-yl)ketones

• Gabriel P. Costa,
• Natália Seus,
• Juliano A. Roehrs,
• Raquel G. Jacob,
• Ricardo F. Schumacher,
• Thiago Barcellos,
• Rafael Luque and
• Diego Alves

Beilstein J. Org. Chem. 2017, 13, 694–702, doi:10.3762/bjoc.13.68

• ; organocatalysis; organoselenium compounds; sonochemistry; 1,2,3-triazoles; Introduction Substituted 1,2,3-triazoles are an interesting class of heterocyclic compounds distinguished by their biological activities [1][2][3] as well as in various fields of chemistry [4][5][6][7][8][9][10][11][12][13][14][15]. The

• 1,2,3-triazoles [33][34][35][36][37]. Selanyltriazoyl carboxylates, carboxamides, carbonitriles or sulfones were synthesized in good to excellent yields using catalytic amounts of an organocatalyst. Organoselenium compounds are attractive synthetic targets because of their selective reactions [38][39

• ][40][41][42][43], photophysical properties [44][45][46][47][48][49] and interesting biological activities [50][51][52]. An interesting class of molecules are the selanyl-1,2,3-triazoles [53][54][55][56][57][58][59][60][61] which can present some biological applications. As example, 4-phenyl-1

Derivatives of the triaminoguanidinium ion, 5. Acylation of triaminoguanidines leading to symmetrical tris(acylamino)guanidines and mesoionic 1,2,4-triazolium-3-aminides

• Jan Szabo,
• Julian Greiner and
• Gerhard Maas

Beilstein J. Org. Chem. 2017, 13, 579–588, doi:10.3762/bjoc.13.57

• either symmetrical N,N’,N’’-tris(N-acyl-N-benzylamido)guanidines 6 or mesoionic 4-amino-1,2,4-triazolium-3-hydrazinides 7. The latter were converted into 1,2,4-triazolium salts by protonation or methylation at the hydrazinide nitrogen atom. Neutral 1,2,4-triazoles 10 were obtained by catalytic

• (Scheme 5). In the case of 7c, the nitro groups are concomitantly reduced to NH2 groups and the bis(aminophenyl) derivative 10c is obtained. Thus, highly substituted and functionalized 1,2,4-triazoles can easily be prepared from TAG-Cl (1) in four steps. Solid-state structures of salts 8b and 9b The

• -1,2,4-triazolium salts by protonation or methylation at the anionic hydrazinide nitrogen atom and into highly substituted and functionalized 1,2,4-triazoles by N-debenzylation through catalytic hydrogenation. Thus, the reaction of triaminoguanidine and its 1,2,3-tribenzyl derivative with acid chlorides

Synthesis of 1-indanones with a broad range of biological activity

• Marika Turek,
• Dorota Szczęsna,
• Marek Koprowski and
• Piotr Bałczewski

Beilstein J. Org. Chem. 2017, 13, 451–494, doi:10.3762/bjoc.13.48

• of palladium catalyst and gaseous oxygen as the terminal oxidant (Scheme 65). 1.8 From other compounds In 2016, Shi et al. have developed an unique, conditions-controlled [Rh2(esp)2] (esp = α,α,α’,α’-tetramethyl-1,3-benzenedipropionic acid)-catalyzed reaction of N-sulfonyl-1,2,3-triazoles 235 leading

Regiochemistry of cyclocondensation reactions in the synthesis of polyazaheterocycles

• Patrick T. Campos,
• Leticia V. Rodrigues,
• Andrei L. Belladona,
• Caroline R. Bender,
• Juliana S. Bitencurt,
• Fernanda A. Rosa,
• Davi F. Back,
• Helio G. Bonacorso,
• Nilo Zanatta,
• Clarissa P. Frizzo and
• Marcos A. P. Martins

Beilstein J. Org. Chem. 2017, 13, 257–266, doi:10.3762/bjoc.13.29

• formation of thiazolidinones and by Komarov et al. [26] for triazoles. Based on the DFT-B3LYP calculations, the formation of products 3–7 can be explained through the following steps (Scheme 1): (i) attack by the NH2 nucleophile of 2 on the β-carbon of 1 resulting in adduct I; (ii) elimination of the NMe2

A postsynthetically 2’-“clickable” uridine with arabino configuration and its application for fluorescent labeling and imaging of DNA

• Heidi-Kristin Walter,
• Bettina Olshausen,
• Ute Schepers and
• Hans-Achim Wagenknecht

Beilstein J. Org. Chem. 2017, 13, 127–137, doi:10.3762/bjoc.13.16

• not present in nucleic acids [2][3][4][5]. Although Huisgen described the uncatalyzed reaction yielding 1,2,3-triazoles already in the 1960s [6], the bioorthogonality with respect to proteins and nucleic acids emerged after Sharpless [7] and Meldal [8] had reported that catalysis by Cu(I) enhances not

Iodination of carbohydrate-derived 1,2-oxazines to enantiopure 5-iodo-3,6-dihydro-2H-1,2-oxazines and subsequent palladium-catalyzed cross-coupling reactions

• Michal Medvecký,
• Igor Linder,
• Luise Schefzig,
• Hans-Ulrich Reissig and
• Reinhold Zimmer

Beilstein J. Org. Chem. 2016, 12, 2898–2905, doi:10.3762/bjoc.12.289

• 1,2,3-triazoles [50]. After the desilylation of syn-5 using potassium fluoride in methanol (Scheme 8) the resulting mono-substituted alkyne was subjected to an established protocol using benzyl azide, copper(I) iodide, triethylamine and TBTA [51] (for a recent review see [52]). The cycloaddition

New approaches to organocatalysis based on C–H and C–X bonding for electrophilic substrate activation

• Pavel Nagorny and
• Zhankui Sun

Beilstein J. Org. Chem. 2016, 12, 2834–2848, doi:10.3762/bjoc.12.283

• bonds was estimated to be −16.8 kcal/mol whereas the corresponding binding energy for the H2O/Cl− complex was determined to be −15.4 kcal/mol. Electron-deficient heterocyclic compounds such as 1,2,3-triazoles may also serve as strong C–H hydrogen bond donors. Substituted 1,2,3-triazoles possess a

• acceptors and also act as electron-withdrawing substituents when attached to other aromatic rings thus enhancing benzene’s ring C–H hydrogen bonding [29][30][31]. Recent studies by the Flood group and the Craig group suggested that receptors containing arylated 1,2,3-triazoles could form stable

• 1,2,3-triazole, ammonium and pyridinium based catalysts. While the asymmetric transformations catalyzed by chiral 1,2,3-triazoles are now well precedented, the feasibility of asymmetric transformations promoted by other types of chiral C–H hydrogen bond donors is yet to be demonstrated. Similarly

Stereoselective synthesis of fused tetrahydroquinazolines through one-pot double [3 + 2] dipolar cycloadditions followed by [5 + 1] annulation

• Xiaofeng Zhang,
• Kenny Pham,
• Shuai Liu,
• Marc Legris,
• Alex Muthengi,
• Jerry P. Jasinski and
• Wei Zhang

Beilstein J. Org. Chem. 2016, 12, 2204–2210, doi:10.3762/bjoc.12.211

• ] anulation has been developed for the synthesis of fused-tetrahydroquinazolines as single diastereomers. The formation of triazoles from the second [3 + 2] cycloaddition readily affords denitrogenated 1,5-diamino compounds which are good substrates for aminomethylation with formaldehyde through a [5 + 1

Synthesis and NMR studies of malonyl-linked glycoconjugates of N-(2-aminoethyl)glycine. Building blocks for the construction of combinatorial glycopeptide libraries

• Markus Nörrlinger,
• Sven Hafner and
• Thomas Ziegler

Beilstein J. Org. Chem. 2016, 12, 1939–1948, doi:10.3762/bjoc.12.183

• either simple alkyl chains [15][16], amino alcohols [17][18] or 1,2,3-triazoles [19][20][21]. These building blocks were used for automated SPOT synthesis on a cellulose surface in order to construct complex glycoconjugates which are able to specifically bind to lectins [15][18][20]. In continuation of

Dinuclear thiazolylidene copper complex as highly active catalyst for azid–alkyne cycloadditions

• Anne L. Schöffler,
• Ata Makarem,
• Frank Rominger and
• Bernd F. Straub

Beilstein J. Org. Chem. 2016, 12, 1566–1572, doi:10.3762/bjoc.12.151

• [1][2][3]. In 2002, the research groups of Meldal and Sharpless independently discovered the strongly rate-enhancing effect of copper(I) salts for azide–alkyne cycloadditions. The 1,4-disubstituted 1,2,3-triazoles are formed exclusively with essentially quantitative conversion and under mild reaction

• less time-consuming and more cost-efficient synthesis. Commercially available, inexpensive 4,5-dimethylthiazole is used as azole starting material instead of 4-aryl-1,2,4-triazoles. The precursor 1a for the NHC ancillary ligand is synthesized via a double SN2-reaction of two equivalents of thiazole

Beta-hydroxyphosphonate ribonucleoside analogues derived from 4-substituted-1,2,3-triazoles as IMP/GMP mimics: synthesis and biological evaluation

• Tai Nguyen Van,
• Audrey Hospital,
• Corinne Lionne,
• Lars P. Jordheim,
• Charles Dumontet,
• Christian Périgaud,
• Laurent Chaloin and
• Suzanne Peyrottes

Beilstein J. Org. Chem. 2016, 12, 1476–1486, doi:10.3762/bjoc.12.144

• Cancérologie de Lyon, 69008 Lyon, France 10.3762/bjoc.12.144 Abstract A series of seventeen β-hydroxyphosphonate ribonucleoside analogues containing 4-substituted-1,2,3-triazoles was synthesized and fully characterized. Such compounds were designed as potential inhibitors of the cytosolic 5’-nucleotidase II

• the alkyne employed. Herein, we report the results of the synthesis and in vitro biological evaluation on the purified human recombinant cN-II of a series of beta-hydroxyphosphonate ribonucleosides including as nucleobases 4-substituted-1,2,3-triazoles (Figure 1). Results and Discussion Chemistry The

• and 5 demonstrates that cycloaddition of terminal alkynes catalysed by Cu(I) were highly regioselective and led to 4-substituted-1,2,3-triazoles in the β-hydroxyphosphonate series. Then, on the basis of the study reported by Hudson et al., we performed extensive 2D-NMR experiments on compounds 3h and

Application of Cu(I)-catalyzed azide–alkyne cycloaddition for the design and synthesis of sequence specific probes targeting double-stranded DNA

• Svetlana V. Vasilyeva,
• Vyacheslav V. Filichev and
• Alexandre S. Boutorine

Beilstein J. Org. Chem. 2016, 12, 1348–1360, doi:10.3762/bjoc.12.128

• of 1,2,3-triazoles can connect several components in one molecule [25][26]. CuAAC belongs to the class of chemical processes called “click-chemistry” and it is also a biorthogonal reaction because functional groups of natural biopolymers are not affected and do not participate in chemical

Copper-catalyzed [3 + 2] cycloaddition of (phenylethynyl)di-p-tolylstibane with organic azides

• Mizuki Yamada,
• Mio Matsumura,
• Yuki Uchida,
• Masatoshi Kawahata,
• Yuki Murata,
• Naoki Kakusawa,
• Kentaro Yamaguchi and
• Shuji Yasuike

Beilstein J. Org. Chem. 2016, 12, 1309–1313, doi:10.3762/bjoc.12.123

• University, 1314-1 Shido, Sanuki, Kagawa 769-2193, Japan Faculty of Pharmaceutical Sciences, Hokuriku University, Ho-3 Kanagawa-machi, Kanazawa 920-1181, Japan 10.3762/bjoc.12.123 Abstract Trisubstituted 5-stibano-1H-1,2,3-triazoles were synthesized in moderate to excellent yields by the Cu-catalyzed [3 + 2

• : cycloaddition; copper catalyst; ethynylstibane; organic azide; 1,2,3-triazole; Introduction The 1,3-dipolar azide–alkyne cycloaddition (AAC) has been effective for the synthesis of a wide variety of 1,2,3-triazoles [1]. However, this reaction has some limitations such as the requirement of high temperature and

• -disubstituted 1,2,3-triazoles. Since then, the CuAAC has been widely applied in organic synthesis [4][5][6][7][8][9][10][11][12], molecular biology [13][14][15][16][17], and materials science [18][19][20]. There are many reports of CuAACs by using terminal alkynes (including metal acetylides) [4][5][6][7][8][9

Multicomponent reactions: A simple and efficient route to heterocyclic phosphonates

• Mohammad Haji

Beilstein J. Org. Chem. 2016, 12, 1269–1301, doi:10.3762/bjoc.12.121

• process involves the 1,3-dipolar cycloaddition of alkynes 182 with in situ generated nitrone 185 to afford isoxazolines 186 which rapidly rearrange to aziridinylphosphonates 183. An efficient method for the synthesis of 1,2,3-triazoles is the copper(I)-catalyzed Husigen cycloaddition of azides with

Bi- and trinuclear copper(I) complexes of 1,2,3-triazole-tethered NHC ligands: synthesis, structure, and catalytic properties

• Shaojin Gu,
• Jiehao Du,
• Jingjing Huang,
• Huan Xia,
• Ling Yang,
• Weilin Xu and
• Chunxin Lu

Beilstein J. Org. Chem. 2016, 12, 863–873, doi:10.3762/bjoc.12.85

• , the easy synthesis and versatile coordination ability of 1,2,3-triazoles have led to an explosion of interest in coordination chemistry [21] and homogeneous catalysis [22][23][24][25][26]. Although a number of metal complexes containing 1,4-disubstituted-1,2,3-triazole ligands were well studied

• , reports concerning their preparation and use of 1,4-disubstituted-1,2,3-triazoles bearing NHC ligands are rare [22][23]. Elsevier et al. [23] reported several of palladium(II) complexes containing a heterobidentate N-heterocyclic carbene-triazolyl ligand. These palladium(II) complexes are active

• via reacting methyl propiolate with (azidomethyl)benzene. This promising catalytic behavior of complex 4 prompted us to extend our studies toward a one-pot synthesis of 1,2,3-triazoles from alkyl halides, sodium azide, and alkynes. The three-component version has already been successfully performed

Creating molecular macrocycles for anion recognition

• Amar H. Flood

Beilstein J. Org. Chem. 2016, 12, 611–627, doi:10.3762/bjoc.12.60

• activity surrounding 1,2,3-triazoles made using click chemistry; and the same triazoles are responsible for anion capture. Mistakes made and lessons learnt in anion recognition provide deeper understanding that, together with theory, now provides for computer-aided receptor design. The lessons are acted

• microscopy (STM) imaging. Their shape persistence makes them ideal for the study of structure–property relationships to enable deep understanding of anion recognition phenomena. The identification of 1,2,3-triazoles as linkers, ligands and building blocks. The synthetic creation of macrocycles sets the scene

• it was an old reaction, the Huisgen cycloaddition, made good (regioselective) with the aid of copper catalysis. Taking that idea on face value, I reasoned that click chemistry was a new and extremely effective way to make 1,2,3-triazoles. It is not often that either new or newly refined reactions

Synthesis of bi- and bis-1,2,3-triazoles by copper-catalyzed Huisgen cycloaddition: A family of valuable products by click chemistry

• Zhan-Jiang Zheng,
• Ding Wang,
• Zheng Xu and
• Li-Wen Xu

Beilstein J. Org. Chem. 2015, 11, 2557–2576, doi:10.3762/bjoc.11.276

• Selective Oxidation, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou, P. R. China 10.3762/bjoc.11.276 Abstract The Cu(I)-catalyzed azide-alkyne cycloaddition reaction, also known as click chemistry, has become a useful tool for the facile formation of 1,2,3-triazoles

• . Specifically, the utility of this reaction has been demonstrated by the synthesis of structurally diverse bi- and bis-1,2,3-triazoles. The present review focuses on the synthesis of such bi- and bistriazoles and the importance of using copper-promoted click chemistry (CuAAC) for such transformations. In

• coupling; Introduction Since its discovery by Huigsen and co-workers fifty years ago [1][2][3][4], the Huisgen cycloaddition of azides to alkynes has gained much attention due to its potential to yield a wide variety of triazoles with structurally diverse and functionalized groups, especially with respect

Effective ascorbate-free and photolatent click reactions in water using a photoreducible copper(II)-ethylenediamine precatalyst

• Redouane Beniazza,
• Natalia Bayo,
• Florian Molton,
• Carole Duboc,
• Stéphane Massip,
• Nathan McClenaghan,
• Dominique Lastécouères and
• Jean-Marc Vincent

Beilstein J. Org. Chem. 2015, 11, 1950–1959, doi:10.3762/bjoc.11.211

• when exposed to TLC lamp. Having established the most efficient illumination conditions, reactions were conducted on a range of water-soluble alkynes and azides by irradiating the NMR tubes with the TLC lamp for 1 h and then leaving it under ambient light. As seen in Scheme 4, a variety of triazoles 9

• flasks (Scheme 5). The hydrogenated triazoles 18 and 19 were obtained in 86% (0.450 g) and 82% (0.644 g) isolated yields, respectively, showing that the procedure is practical for laboratory-scale applications. Conclusion The copper(II) precatalyst 1 incorporating a benzophenone chromophore is easily

• . Proposed mechanism for the photoreduction process. Structures, conversions and isolated yields for triazoles 9–17 conducted in D2O in NMR tubes. Preparative scale synthesis of 18 and 19. Supporting Information Supporting Information File 494: Experimental and analytical data. Supporting Information File

Synthesis, antimicrobial and cytotoxicity evaluation of new cholesterol congeners

• Mohamed Ramadan El Sayed Aly,
• Hosam Ali Saad and
• Shams Hashim Abdel-Hafez

Beilstein J. Org. Chem. 2015, 11, 1922–1932, doi:10.3762/bjoc.11.208

• , hydroxyalkyl-1,2,3-triazoles were reported as valuable pharmacophores [36]. The products were isolated in good yields and the H-5 signal of triazole (1H NMR) could be observed as a singlet at δ ≈ 7.5 ppm. Compound 11a was further converted into the corresponding bromo derivative 12 in good yield under the same

Deproto-metallation of N-arylated pyrroles and indoles using a mixed lithium–zinc base and regioselectivity-computed CH acidity relationship

• Mohamed Yacine Ameur Messaoud,
• Ghenia Bentabed-Ababsa,
• Madani Hedidi,
• Aïcha Derdour,
• Floris Chevallier,
• Yury S. Halauko,
• Oleg A. Ivashkevich,
• Vadim E. Matulis,
• Laurent Picot,
• Valérie Thiéry,
• Thierry Roisnel,
• Vincent Dorcet and
• Florence Mongin

Beilstein J. Org. Chem. 2015, 11, 1475–1485, doi:10.3762/bjoc.11.160

• antiproliferative activity, with no significant difference between the pyrrole and indole derivatives. Conclusion Unlike other azoles such as pyrazole and triazoles [37][38][40], pyrrole and indole do not possess any atom capable of coordinating metals. As a consequence, the corresponding CH acidities in THF

• solution, which were calculated using a continuum solvation model, better help in rationalizing the outcome of the deproto-metallation reactions. In addition, whereas N-(4-substituted phenyl)pyrazoles and -triazoles (e.g., with methoxy as substituent, Figure 7) can be deprotonated at C2’ for the same

Synthesis and spectroscopic properties of β-triazoloporphyrin–xanthone dyads

• Dileep Kumar Singh and
• Mahendra Nath

Beilstein J. Org. Chem. 2015, 11, 1434–1440, doi:10.3762/bjoc.11.155

• transfer between the porphyrin part and the attached subunit. Moreover, the 1,4-disubstituted triazoles are found to be very useful for various applications including modification of cell surfaces [25], synthesis of new glycoproteins [26], specific labeling of virus particles [27] and synthesis of

• ] including anti-oxidative [35], antihypertensive [36], anti-inflammatory [37] and antiplatelet agents [38]. They have also been used as fluorophores and exhibited good fluorescence properties when attached to a triazole ring [39][40]. Owing to the biological significance of porphyrins, 1,2,3-triazoles and

Synthesis of alpha-tetrasubstituted triazoles by copper-catalyzed silyl deprotection/azide cycloaddition

• Zachary L. Palchak,
• Paula T. Nguyen and
• Catharine H. Larsen

Beilstein J. Org. Chem. 2015, 11, 1425–1433, doi:10.3762/bjoc.11.154

• triazoles. A streamlined two-step approach to this uncommon class of hindered triazoles will accelerate exploration of their therapeutic potential. The superior activity of copper(II) triflate in the formation of triazoles from sensitive alkyne substrates extends to simple terminal alkynes. Keywords: azide

• ; copper catalysis; multicomponent reactions; tetrasubstituted carbon; triazole; Introduction 1,2,3-Triazoles demonstrate wide spread application in biological systems and drug development [1][2][3][4][5][6][7][8][9][10][11][12]. Copper-catalyzed azide–alkyne cycloadditions (CuAAC) regioselectively

• introduce a wide variety of substituents on 1,4-disubstituted 1,2,3-triazoles from the organic azide or terminal alkyne starting materials [1][2]. These Huisgen reactions [13] facilitate rapid drug screening by allowing for tracking in biological systems and the exploration of structure-activity

The reactions of 2-ethoxymethylidene-3-oxo esters and their analogues with 5-aminotetrazole as a way to novel azaheterocycles

• Marina V. Goryaeva,
• Yanina V. Burgart,
• Marina A. Ezhikova,
• Mikhail I. Kodess and
• Viktor I. Saloutin

Beilstein J. Org. Chem. 2015, 11, 385–391, doi:10.3762/bjoc.11.44

• preparation of compound 11 in the reaction of ester 1f with 5-AT was unexpected, because it is known that ester 1f interacts with 3-amino-1,2,4-triazole in refluxing ethanol [8] and with substituted 5-amino-1,2,4-triazoles in acetic acid [34] to afford triazolo[1,5-a]pyrimidines. However, we did not observe

Synthesis and chemosensing properties of cinnoline-containing poly(arylene ethynylene)s

• Natalia A. Danilkina,
• Petr S. Vlasov,
• Semen M. Vodianik,
• Andrey A. Kruchinin,
• Yuri G. Vlasov and
• Irina A. Balova

Beilstein J. Org. Chem. 2015, 11, 373–384, doi:10.3762/bjoc.11.43

• ][17][18]. Moreover, various species of` PAEs with quinoline [19][20], quinoxaline [21][22], thiadiazole [17][23], carbazole [18][24], 1,2,4-triazoles [25], thiazole [26] and azametallocyclic [27] units incorporated into a polymer chain have been described. Since ligands based on pyridazine rings can