Synthesis of α-(perfluoroalkylsulfonyl)propiophenones: a new set of reagents for the light-mediated perfluoroalkylation of aromatics

• Durbis J. Castillo-Pazos,
• Juan D. Lasso and
• Chao-Jun Li

Beilstein J. Org. Chem. 2022, 18, 788–795, doi:10.3762/bjoc.18.79

• solubility of this class of molecules, perfluoroalkyl iodides have a tendency to be weakly soluble in common organic solvents (i.e., ethyl acetate and methanol) rendering their application troublesome [9]. Moreover, the homolysis of the perfluoroalkyl iodide produces iodine radicals that can result in stray

• , the expansion of our previously reported propiophenone family of reagents was envisioned as suitable alternative to produce a bench stable, organic soluble, and iodine-free perfluroalkylation source. In 2017, our group developed a metal-free and redox-neutral protocol for the photoinduced alkylation

Mechanochemical halogenation of unsymmetrically substituted azobenzenes

• Dajana Barišić,
• Mario Pajić,
• Ivan Halasz,
• Darko Babić and
• Manda Ćurić

Beilstein J. Org. Chem. 2022, 18, 680–687, doi:10.3762/bjoc.18.69

• PdII-catalyzed iodination of L6–8 was conducted with N-iodosuccinimide (NIS) as the iodine source. The reaction time for the iodination of L6 was the same as for the analogous bromination reaction (Table 2, entry 10). Iodination of L7 and L8 was completed within five and seven hours, respectively

DDQ in mechanochemical C–N coupling reactions

• Shyamal Kanti Bera,
• Rosalin Bhanja and
• Prasenjit Mal

Beilstein J. Org. Chem. 2022, 18, 639–646, doi:10.3762/bjoc.18.64

• obtained in 88% yield (Table 1, entry 1). However, in the presence of 1.2 equiv, the yield of 2a increased to 97% (Table 1, entry 2). Further, with the increase of the amount of DDQ to 1.5 equiv, no further improvement was obtained (Table 1, entry 3). In addition, we have screened several iodine oxidation

• Information File 1, Table S1, entries 4 and 5). When molecular iodine or NIS were used as oxidants, product 5a was obtained in 83% and 80% yield, respectively (Supporting Information File 1, Table S1, entries 6 and 7). However, the yield of the desired product 5a slightly decreased to 92% with lowering of the

Menadione: a platform and a target to valuable compounds synthesis

• Acácio S. de Souza,
• Ruan Carlos B. Ribeiro,
• Dora C. S. Costa,
• Fernanda P. Pauli,
• David R. Pinho,
• Matheus G. de Moraes,
• Fernando de C. da Silva,
• Luana da S. M. Forezi and
• Vitor F. Ferreira

Beilstein J. Org. Chem. 2022, 18, 381–419, doi:10.3762/bjoc.18.43

• published an alternative and sustainable methodology, using phenyliodine(III) bis(trifluoroacetate) (PIFA) as an oxidizing agent of the demethylation reaction [86]. The hypervalent iodine(III) proved to be a good oxidizing agent in the formation of 10 (92% yield) (Table 3, entry 2). According to the authors

Synthesis of piperidine and pyrrolidine derivatives by electroreductive cyclization of imine with terminal dihaloalkanes in a flow microreactor

• Yuki Naito,
• Naoki Shida and
• Mahito Atobe

Beilstein J. Org. Chem. 2022, 18, 350–359, doi:10.3762/bjoc.18.39

• other hand, the yield of 3a decreased even when the terminal halogen of the dihaloalkane was changed to iodine (Table 7, entry 3). LSV measurements showed that the reduction potential of 1,4-diiodobutane (2c) was almost the same as that of the substrate imine 1 (Supporting Information File 1, Figure S12

Flow synthesis of oxadiazoles coupled with sequential in-line extraction and chromatography

• Kian Donnelly and
• Marcus Baumann

Beilstein J. Org. Chem. 2022, 18, 232–239, doi:10.3762/bjoc.18.27

• Kian Donnelly Marcus Baumann School of Chemistry, University College Dublin, Science Centre South, Belfield, Dublin 4, Ireland 10.3762/bjoc.18.27 Abstract An efficient continuous flow process is reported for the synthesis of various 1,3,4-oxadiazoles via an iodine-mediated oxidative cyclisation

• -oxadiazole unit [28][29][30][31][32][33]. In 2012, Guin and co-workers described the iodine-mediated cyclodesulphurisation of thiosemicarbazides, yielding the corresponding 1,3,4-oxadiazoles [32]. Subsequently, Yu and co-workers reported the iodine-mediated oxidative cyclisation of acyl hydrazones to form

• oxadiazoles [33]. While this method provided the products in high yields, it required the use of super-stoichiometric quantities of iodine, which is potentially toxic and corrosive. This potential toxicity in combination with the requirement for the subsequent removal of excess iodine and potentially

Efficient N-arylation of 4-chloroquinazolines en route to novel 4-anilinoquinazolines as potential anticancer agents

• Rodolfo H. V. Nishimura,
• Thiago dos Santos,
• Valter E. Murie,
• Luciana C. Furtado,
• Leticia V. Costa-Lotufo and
• Giuliano C. Clososki

Beilstein J. Org. Chem. 2021, 17, 2968–2975, doi:10.3762/bjoc.17.206

• of the anticancer agent verubulin. Thus, after regioselective 4-chloroquinazoline metalation by an in situ trapping metalation strategy, reaction quenching with iodine allowed us to isolate 4-chloro-8-iodoquinazoline in 83% yield. Surprisingly, further reaction of 4-chloro-8-iodoquinazoline with 4

• . While anthranilamide (5) bromination with N-bromosuccinimide in acetonitrile at room temperature [29] furnished 2-amino-5-bromobenzamide (6a) in 78% yield, iodination of 5 with iodine in the presence of hydrogen peroxide in water [30] at 50 °C provided 2-amino-5-iodobenzamide (6b) in 89% yield. After

• that, the cyclocondensation [29] of the halogenated anthranilamides 6a,b with benzaldehyde followed by dehydrogenation promoted by iodine gave the corresponding quinazolin-4(3H)-ones 7a,b, which we used in the next step without purification. Finally, chlorination [31] of quinazolin-4(3H)-ones 7a,b by

Iron-catalyzed domino coupling reactions of π-systems

• Austin Pounder and
• William Tam

Beilstein J. Org. Chem. 2021, 17, 2848–2893, doi:10.3762/bjoc.17.196

The PIFA-initiated oxidative cyclization of 2-(3-butenyl)quinazolin-4(3H)-ones – an efficient approach to 1-(hydroxymethyl)-2,3-dihydropyrrolo[1,2-a]quinazolin-5(1H)-ones

• Alla I. Vaskevych,
• Nataliia O. Savinchuk,
• Ruslan I. Vaskevych,
• Eduard B. Rusanov,
• Oleksandr O. Grygorenko and
• Mykhailo V. Vovk

Beilstein J. Org. Chem. 2021, 17, 2787–2794, doi:10.3762/bjoc.17.189

• includes the reaction of readily available anthranilic amides or hydrazides with pent-4-yn-1-ols or -carboxylic acids promoted by PdCl4 [15], Au(І) [16][17][18] or Cu(ІІ) [19] salts. In another version, the target compounds were obtained by iodine-catalyzed reaction of the aforementioned anthranilic acid

• )-ones 7 upon action of bis(trifluoroacetoxy)iodobenzene (PIFA) (see Scheme 1D). A part from the well-known applications of hypervalent iodine compounds for oxidative rearrangements, fragmentations, halogenations and hydroxylations [37][38], they were also involved in the synthesis of N-heterocycles [39

Synthetic strategies toward 1,3-oxathiolane nucleoside analogues

• Umesh P. Aher,
• Dhananjai Srivastava,
• Girij P. Singh and
• Jayashree B. S

Beilstein J. Org. Chem. 2021, 17, 2680–2715, doi:10.3762/bjoc.17.182

Synthesis of highly substituted fluorenones via metal-free TBHP-promoted oxidative cyclization of 2-(aminomethyl)biphenyls. Application to the total synthesis of nobilone

• Ilya A. P. Jourjine,
• Lukas Zeisel,
• Jürgen Krauß and
• Franz Bracher

Beilstein J. Org. Chem. 2021, 17, 2668–2679, doi:10.3762/bjoc.17.181

• . Benzylamines and derivatives thereof have been described in literature to be susceptible to oxidation by diverse reagents (tritylium ion [40], silver [38] and cerium salts [41], peroxides [42][43][44] and persulfates [45], nitroxyls [46], hypervalent iodine compounds [39][47], or tetrahalomethanes [48]) to

• aldehyde (33%) being generated (Table 2, entry 11). Similar results were obtained when adding iodine to promote benzylic oxidation [56] (Table 2, entry 12). Finally, Pd(OAc)2 was added in hopes of improving the mediation of C–C bond formation [38] (Table 2, entry 13). Interestingly, here the yield of

Cryogels: recent applications in 3D-bioprinting, injectable cryogels, drug delivery, and wound healing

• Luke O. Jones,
• Leah Williams,
• Tasmin Boam,
• Martin Kalmet,
• Chidubem Oguike and
• Fiona L. Hatton

Beilstein J. Org. Chem. 2021, 17, 2553–2569, doi:10.3762/bjoc.17.171

• al, investigated the ability of cryogels to mimic various layers of skin [107]. A polyvinylpyrrolidone-iodine cryogel was used as the top layer to impart antiseptic properties, while the bottom regenerative layer comprised a gelatin cryogel. When the cryogel had been implanted into rabbits which had

Recent advances in the tandem annulation of 1,3-enynes to functionalized pyridine and pyrrole derivatives

• Yi Liu,
• Puying Luo,
• Yang Fu,
• Tianxin Hao,
• Xuan Liu,
• Qiuping Ding and
• Yiyuan Peng

Beilstein J. Org. Chem. 2021, 17, 2462–2476, doi:10.3762/bjoc.17.163

• also found that the aza-annulation could be carried out under iodine-mediated electrophilic annulation reaction conditions to give 5-iodo-3,6-disubstituted pyridines 3 as the major products, occasionally with a small amount of 2-acylated pyrroles 4. The proposed mechanism for the Ag-catalyzed aza

• previous studies on heterocycle synthesis, Punniyamurthy and co-workers designed the electrophilic iodocyclization of 2-nitro-1,3-enynes 34 for the synthesis of pyrrole derivatives. In 2013, they reported an efficient route to pentasubstituted pyrroles from 2-nitro-1,3-enynes 34, amines, and iodine under

• yield. Aliphatic amines were also tolerated, providing the desired products in only moderate yield. The plausible mechanism involves a tandem base-promoted aza-Michael addition, 1,2-iodocyclization, and iodine-mediated oxidative aromatization. In 2017, Zhang and co-workers reported a silver-catalyzed

Advances in mercury(II)-salt-mediated cyclization reactions of unsaturated bonds

• Sumana Mandal,
• Raju D. Chaudhari and
• Goutam Biswas

Beilstein J. Org. Chem. 2021, 17, 2348–2376, doi:10.3762/bjoc.17.153

• two separate publications [36][37]. The cyclized product thus formed was further treated with iodine to get trans-2,5-bis(iodomethyl)-p-dioxane (4a). The formation of trans-isomer 4a as the major product and cis-isomer 4b as a minor product was later confirmed by Summerbell et al. by repeating the

A novel methodology for the efficient synthesis of 3-monohalooxindoles by acidolysis of 3-phosphate-substituted oxindoles with haloid acids

• Li Liu,
• Yue Li,
• Tiao Huang,
• Dulin Kong and
• Mingshu Wu

Beilstein J. Org. Chem. 2021, 17, 2321–2328, doi:10.3762/bjoc.17.150

• -workers reported controllable mono- and dichlorooxidation of indoles with hypervalent iodine species in DMF/CF3CO2H/H2O at room temperature, which generated 3,3-dichlorooxindoles and 3-monochlorooxindoles, respectively (Scheme 1, reaction 3) [23]. Apart from these methods, most traditional approaches to 3

Halides as versatile anions in asymmetric anion-binding organocatalysis

• Lukas Schifferer,
• Martin Stinglhamer,
• Kirandeep Kaur and
• Olga García Macheño

Beilstein J. Org. Chem. 2021, 17, 2270–2286, doi:10.3762/bjoc.17.145

• oxycarbenium ion, which enables high enantioselectivities up to 95% ee and yields up to 91%. Furthermore, an investigation of the involved halide counter-anion revealed that chloride was the most potent one in regards of both yield and enantioinduction. Bromine and iodine on the other hand, afforded the final

Transition-metal-free intramolecular Friedel–Crafts reaction by alkene activation: A method for the synthesis of some novel xanthene derivatives

• Tülay Yıldız,
• İrem Baştaş and
• Hatice Başpınar Küçük

Beilstein J. Org. Chem. 2021, 17, 2203–2208, doi:10.3762/bjoc.17.142

• alcohols with diaryliodonium salts [26], the Sc(OTf)3-catalyzed domino reaction [27], and the iodine-catalyzed nucleophilic substitution reaction of xanthen-9-ol [28]. As an example of an intramolecular hydroarylation of an olefin, 9,10-dihydroacridines, which are N derivatives of xanthenes, were

Chemical syntheses and salient features of azulene-containing homo- and copolymers

• Vijayendra S. Shetti

Beilstein J. Org. Chem. 2021, 17, 2164–2185, doi:10.3762/bjoc.17.139

• polymerization of azulene (1) by iodine or bromine to obtain polyazulene–iodine/bromine complexes (PAz-I2/PAz-Br2) (Scheme 1). The PAZ-I2 complex was found to be insoluble whereas PAZ-Br2 was sparingly soluble in most of the organic solvents. Although no structure was proposed for these polymer complexes, based

• polyazulene 3 or 3’ was soluble in various organic solvents such as toluene, dichloromethane, tetrahydrofuran (THF), and N,N’-dimethylformamide (DMF). The ‘true polyazulene’ exhibited the conductivity of 5.38 × 10−8 S/cm, which was increased to 8.16 × 10−3 S/cm upon exposure to iodine atmosphere, presumably

• acids on the polymer backbone. The direct current (DC) conductivity of protonated and iodine-doped 1,3-polyazulene 5 (0.74 and 1.22 S/cm respectively) was significantly higher than its neutral form (<10−11 S/cm). The increased conductivity of 1,3-polyazulene 5 upon protonation can be attributed to the

Catalyzed and uncatalyzed procedures for the syntheses of isomeric covalent multi-indolyl hetero non-metallides: an account

• Ranadeep Talukdar

Beilstein J. Org. Chem. 2021, 17, 2102–2122, doi:10.3762/bjoc.17.137

• gave a mixture of the mono and bis isomers (5 and 6, respectively) in fair to excellent yields (Scheme 2a). Increasing the amount of iodine led to less unreacted starting material 1, and increased formation of the bisindole product 6. An almost quantitative conversion of 1 was observed with a high

• mono- and di(phenylthio)-substituted indoles 139 and 140 (Scheme 18d) [97]. Catalytic iodine was used to oxidize PhSSPh (138) to PhSI (141), to which indole adds to give (phenylthio)indole 139 along with HI. HI reduces SeO2 to Se. Se interacts with two molecules of indole in the presence of air to give

Towards new NIR dyes for free radical photopolymerization processes

• Haifaa Mokbel,
• Guillaume Noirbent,
• Didier Gigmes,
• Frédéric Dumur and
• Jacques Lalevée

Beilstein J. Org. Chem. 2021, 17, 2067–2076, doi:10.3762/bjoc.17.133

• with a reaction yield ranging from 66% to 91% (Scheme 4). Finally, for some of the dyes, a metathesis reaction was carried out with sodium tetraphenylborate. Indeed, all dyes were obtained as iodine salts so that a counterion exchange could be carried out. Using this strategy, four “soft” salts could

Recent advances in the syntheses of anthracene derivatives

• Giovanni S. Baviera and
• Paulo M. Donate

Beilstein J. Org. Chem. 2021, 17, 2028–2050, doi:10.3762/bjoc.17.131

• products 24. Next, the key step was introducing chlorine, bromine, or iodine substituents by halodesilylation of 24. With the halogenated products 25 in hands, the authors employed DDQ in the oxidation/aromatization step, to obtain the di- and tetrahaloanthracenes 26 in good yields (61–85%) [39]. This

• expected products [76]. Sun and co-workers modified the method proposed by Singh. In 2011, they reported a method that employed molecular iodine as the catalyst, under microwave radiation as heat source, and obtained tetrahydrobenzo[a]xanthene-11-one and diazabenzo[a]anthracene-9,11-dione derivatives in

• good to excellent yields (70–94%) [77]. Then, in 2012, Sun and co-workers reported another method employing molecular iodine as catalyst under reflux with acetic acid instead of microwave radiation and also obtained good yields (66–89%) [78]. Because the three methodologies provided good yields, the

Progress and challenges in the synthesis of sequence controlled polysaccharides

• Giulio Fittolani,
• Theodore Tyrikos-Ergas,
• Denisa Vargová,
• Manishkumar A. Chaube and
• Martina Delbianco

Beilstein J. Org. Chem. 2021, 17, 1981–2025, doi:10.3762/bjoc.17.129

Asymmetric organocatalyzed synthesis of coumarin derivatives

• Natália M. Moreira,
• Lorena S. R. Martelli and
• Arlene G. Corrêa

Beilstein J. Org. Chem. 2021, 17, 1952–1980, doi:10.3762/bjoc.17.128

• high diastereo- and enantioselectivity and moderate to excellent yields. The authors highlighted that the catalyst also contributes to cyclization, since subjecting the isolated Michael adduct to the second conditions with iodine and K2CO3 there is a decrease in yield and enantiomeric excess when

On the application of 3d metals for C–H activation toward bioactive compounds: The key step for the synthesis of silver bullets

• Renato L. Carvalho,
• Amanda S. de Miranda,
• Mateus P. Nunes,
• Roberto S. Gomes,
• Guilherme A. M. Jardim and
• Eufrânio N. da Silva Júnior

Beilstein J. Org. Chem. 2021, 17, 1849–1938, doi:10.3762/bjoc.17.126

Cerium-photocatalyzed aerobic oxidation of benzylic alcohols to aldehydes and ketones

• Girish Suresh Yedase,
• Sumit Kumar,
• Jessica Stahl,
• Burkhard König and
• Veera Reddy Yatham

Beilstein J. Org. Chem. 2021, 17, 1727–1732, doi:10.3762/bjoc.17.121

• Br2, MnO2, hypervalent iodine reagents, chromium-based reagents, activated dimethyl sulfoxide, KMnO4, OsO4, or metal-based catalysts and peroxide were used [7][8][9][10][11][12][13][14][15][16][17]. Most of these protocols produce harmful waste and some of the oxidizing reagents are considered toxic