A one-pot synthesis of 3-trifluoromethyl-2-isoxazolines from trifluoromethyl aldoxime

• Raoni S. B. Gonçalves,
• Michael Dos Santos,
• Guillaume Bernadat,
• Danièle Bonnet-Delpon and
• Benoit Crousse

Beilstein J. Org. Chem. 2013, 9, 2387–2394, doi:10.3762/bjoc.9.275

• reacted with olefins (such as styrene, allyl derivatives, etc.) through a 1,3-dipolar cycloaddition to give the desired product. Therefore, the development of a straightforward and mild general procedure to access these valuable derivatives remains of great importance. In the present work, we describe a

• unreactive towards trifluoroacetonitrile oxide 4. 1,3-Dipolar cycloaddition reactions have been studied from the theoretical standpoint since the 1970’s onwards [36][37] with an ever-increasing accuracy as computational methods evolved [38]. Assuming that the above-mentioned transformations occur via a

Gold(I)-catalyzed enantioselective cycloaddition reactions

• Fernando López and
• José L. Mascareñas

Beilstein J. Org. Chem. 2013, 9, 2250–2264, doi:10.3762/bjoc.9.264

• , aldol reactions, 1,3-dipolar cycloadditions, and cyclizations [13][14][15]. Other gold-promoted asymmetric induction strategies rely on the use of chiral counterions. Indeed, it has been shown that a tight chiral ion pair with the gold cation is able to induce excellent levels of asymmetry in certain

• the species that participates in the cycloaddition to the nitrone, probably in a concerted pathway, and thus providing the corresponding products with high levels of stereoselectivity [82][83]. Previously, in 2009, J. Zhang had reported a gold(I)-catalyzed 1,3-dipolar [3 + 3] cycloaddition between 2

• leading to 1,2-oxazepane derivatives. Enantioselective gold(I)-catalyzed 1,3-dipolar [3 + 3] cycloaddition between 2-(1-alkynyl)-2-alken-1-ones and nitrones. Enantioselective [4 + 3] cycloaddition leading to 5,7-fused bicyclic furo[3,4-d][1,2]oxazepines. Acknowledgements Our work in the area is supported

Synthesis and characterization of novel bioactive 1,2,4-oxadiazole natural product analogs bearing the N-phenylmaleimide and N-phenylsuccinimide moieties

• Catalin V. Maftei,
• Elena Fodor,
• Peter G. Jones,
• M. Heiko Franz,
• Gerhard Kelter,
• Heiner Fiebig and
• Ion Neda

Beilstein J. Org. Chem. 2013, 9, 2202–2215, doi:10.3762/bjoc.9.259

• (interplanar angles 22° and 9°). Three of the four NH hydrogens are involved in hydrogen bonds, leading to ribbons of H-bonded rings parallel to the a axis. Following the second route, the 1,3-dipolar cycloaddition, with the purpose of increasing the yield of compound 1, we used p-toluenesulfonic acid (PTSA

• complex as a leaving group, giving rise to the formation of the nitrile oxide. The 1,2,4-oxadiazole moiety is established by the 1,3-dipolar cycloaddition of nitrile oxide to the 4-aminobenzonitrile. However, the Lewis acid might also be involved in the formation of the heterocycle via a Lewis acid

• catalyzed [3 + 2] cycloaddition reaction. Unfortunately, the yield for this reaction was very low (<20%). In order to obtain compound 1 by the 1,3 dipolar cycloaddition route we changed the protocol. We synthesized the nitro derivative 2 (3-tert-butyl-5-(4-nitrophenyl)-1,2,4-oxadiazole) in situ by using the

The chemistry of isoindole natural products

• Klaus Speck and
• Thomas Magauer

Beilstein J. Org. Chem. 2013, 9, 2048–2078, doi:10.3762/bjoc.9.243

• . This transformation proceeds via a 1,3-dipolar cycloaddition between the in situ formed azomethinylide 15 and the benzoquinone 16 to directly give 17 (Scheme 1). Spontaneous oxidation of the so-obtained cyclization adduct generates isoindole 18. Isoindoles have also found application as dyes. Pigment

• % overall yield. Two years later, a more concise and efficient access to (±)-nominine (225), featuring a oxidoisoquinolinium-1,3-dipolar cycloaddition and a dienamine-Diels–Alder reaction, was accomplished by Gin (Scheme 31) [178]. Coupling of 235 and 236, both synthesized within three steps from simple

The chemistry of amine radical cations produced by visible light photoredox catalysis

• Jie Hu,
• Jiang Wang,
• Theresa H. Nguyen and
• Nan Zheng

Beilstein J. Org. Chem. 2013, 9, 1977–2001, doi:10.3762/bjoc.9.234

• that when tetrahydroisoquinolines (e.g., 41 and 45) were substituted with a methylene group attached to one or two esters, the initially formed iminium ions were readily converted to azomethine ylides. They subsequently underwent 1,3-dipolar cycloaddition with a range of dipolarophiles to form fused

• pyrrolidines 43 and 47 (Scheme 12). Xiao also showed that the pyrrolidine ring of 43 could be further oxidized to a fused pyrrole 44 under the same photoredox conditions or by treatment with NBS. Both Ru(bpy)3Cl2 and Ir(bpy)(ppy)2 were found to be effective catalysts. A plausible mechanism for the 1,3-dipolar

• loss of a proton. 1,3-Dipolar cycloaddition of 50 with a dipolarophile 46 furnishes fused pyrrolidine 51 that is further oxidized to pyrrole 52. The Zhu group discovered that the use of α-ketoester 53 as a pronucleophile to intercept the iminium ion of 13 triggered a new cascade reaction en route to

AgOTf-catalyzed one-pot reactions of 2-alkynylbenzaldoximes with α,β-unsaturated carbonyl compounds

• Qiuping Ding,
• Dan Wang,
• Puying Luo,
• Meiling Liu,
• Shouzhi Pu and
• Liyun Zhou

Beilstein J. Org. Chem. 2013, 9, 1949–1956, doi:10.3762/bjoc.9.231

• /Pd-catalyzed direct arylation of 2-alkynylbenzaldoximes [41]. Inspired by the key contributions from the groups of Wu [36][37][38][39] and Deng [40], we envisioned that 1-alkylated isoquinolines could be generated in a one-pot AgOTf-catalyzed cyclization/1,3-dipolar cycloaddition/rearrangement or

• a 1,3-dipolar cycloaddition with α,β-unsaturated carbonyl compound 2 leading to 2,10b-dihydro-1H-isoxazolo[3,2-a]isoquinoline intermediate B [44][45], which may then suffer a rearrangement or fragmentation resulting in compound 3 (Scheme 1) [35][36][38][42]. To demonstrate the feasibility of this

[3 + 2]-Cycloadditions of nitrile ylides after photoactivation of vinyl azides under flow conditions

• Stephan Cludius-Brandt,
• Lukas Kupracz and
• Andreas Kirschning

Beilstein J. Org. Chem. 2013, 9, 1745–1750, doi:10.3762/bjoc.9.201

• to perform many transformations that are hardly possible under thermal conditions. This includes photocatalytic reactions that have seen an immense interest lately [1]. Nitrile ylides 3 are 1,3-dipoles that have served for the preparation of different five-membered N-heterocycles in 1,3-dipolar

• nitrile ylide formation and the 1,3-dipolar cycloaddition. We initially chose to photolyze methyl 4-(1-azidovinyl)benzoate (1a) in the presence of acrylonitrile (4a) (Table 2). A solution of 1a and 4a in the respective solvent was passed through the photochemical flow-reactor with 5.5 mL volume and a

• presence of a tenfold access of 4a provided the cycloaddition product 5a in 96% yield as a single regioisomer (Table 2, entry 8). Remarkably, after removal of the solvent under reduced pressure it was not necessary to further purify the product. Next the scope of the photo-induced 1,3-dipolar cycloaddition

The rapid generation of isothiocyanates in flow

• Marcus Baumann and
• Ian R. Baxendale

Beilstein J. Org. Chem. 2013, 9, 1613–1619, doi:10.3762/bjoc.9.184

• ], both reagents causing safety concerns due to the formation of toxic, malodorous and/or extremely corrosive byproducts (Scheme 1a). An underutilised alternative sequence is the 1,3-dipolar cycloaddition reaction between a nitrile oxide and a thiourea compound which initially generates an unstable 1,4,2

Efficient continuous-flow synthesis of novel 1,2,3-triazole-substituted β-aminocyclohexanecarboxylic acid derivatives with gram-scale production

• Sándor B. Ötvös,
• Ádám Georgiádes,
• István M. Mándity,
• Lóránd Kiss and
• Ferenc Fülöp

Beilstein J. Org. Chem. 2013, 9, 1508–1516, doi:10.3762/bjoc.9.172

• acid derivatives in a simple and efficient continuous-flow procedure is reported. The 1,3-dipolar cycloaddition reactions were performed with copper powder as a readily accessible Cu(I) source. Initially, high reaction rates were achieved under high-pressure/high-temperature conditions. Subsequently

• applications in numerous other areas of modern chemical sciences, such as bioconjugation [13], supramolecular chemistry, [14] and polymer sciences [15]. Probably the most useful and powerful procedure for the synthesis of 1,2,3-triazoles is the Huisgen 1,3-dipolar cycloaddition of organic azides with

• elapsed between the first contact of the ink with the bed and the moment when the blue colour appeared at the column outlet was measured. Examples of 1,2,3-triazoles with various biological activities. Selected bioactive alicyclic β-amino acids. Experimental setup for the CF reactions. 1,3-Dipolar azide

Dipolar addition to cyclic vinyl sulfones leading to dual conformation tricycles

• Steven S. Y. Wong,
• Michael G. Brant,
• Christopher Barr,
• Allen G. Oliver and
• Jeremy E. Wulff

Beilstein J. Org. Chem. 2013, 9, 1419–1425, doi:10.3762/bjoc.9.159

• -broadening in the NMR spectra was found to depend on the presence of substitution next to the inverting nitrogen center. Keywords: DFT calculations; dipolar addition; fluxional behavior; sulfones; VT NMR; Introduction The 1,3-dipolar cycloaddition [1][2][3] represents a powerful methodology for the

• species [13][14][15][16][17][18][19][20][21]) have been less-frequently employed as acceptors in 1,3-dipolar cycloadditions [22][23][24][25]. Indeed, we are only aware of a single prior example of a cyclic alkyl vinyl sulfone participating in a dipolar addition with an azomethine ylide [26]. In part, this

• hydrazone function should disfavor formation of one of the new C–C bonds in 3. However, we speculate that the increase in electron density serves to disfavor dimerization more than 1,3-dipolar addition to 1a. As a result, more dipole remains in solution to undergo the desired coupling. The effect of this

Microwave-assisted three-component domino reaction: Synthesis of indolodiazepinotriazoles

• Rajesh K. Arigela,
• Sudhir K. Sharma,
• Brijesh Kumar and
• Bijoy Kundu

Beilstein J. Org. Chem. 2013, 9, 401–405, doi:10.3762/bjoc.9.41

• Abstract A microwave-assisted three-component protocol involving N-1 alkylation of 2-alkynylindoles with epichlorohydrin, ring opening of the epoxide with sodium azide, and an intramolecular Huisgen azide–internal alkyne 1,3-dipolar cycloaddition domino sequence has been described. The efficacy of the

• methodology has been demonstrated by treating various 2-alkynylindoles (aromatic/aliphatic) with epichlorohydrin and sodium azide furnishing annulated tetracyclic indolodiazepinotriazoles in satisfactory yields. Keywords: 2-alkynylindoles; azides; 1,3-dipolar cycloaddition; domino reaction

• ; indolodiazepinotriazoles; Introduction The intermolecular Huisgen azide–alkyne 1,3-dipolar cycloaddition reaction [1][2][3][4][5][6] for the synthesis of 1,2,3-triazoles in both aqueous [7][8][9][10] and organic solvents under either metal-catalyzed [11][12][13] or metal-free conditions [14][15][16] has received

Towards a biocompatible artificial lung: Covalent functionalization of poly(4-methylpent-1-ene) (TPX) with cRGD pentapeptide

• Lena Möller,
• Christian Hess,
• Jiří Paleček,
• Yi Su,
• Axel Haverich,
• Andreas Kirschning and
• Gerald Dräger

Beilstein J. Org. Chem. 2013, 9, 270–277, doi:10.3762/bjoc.9.33

• required for these kinds of 1,3-dipolar cycloadditions, but their potential cytotoxic properties limit the usability in biomedical applications [16][17]. For overcoming this problem, several copper-free ligation methods were developed. In this work we pursue both options, i.e., the copper-mediated as well

• alternatively pursued a copper-free approach that relied on the oxanorbornadiene strategy of Rutjes [24][25][26][27][28]. This type of specific conjugation most likely proceeds by a 1,3-dipolar cycloaddition/retro-Diels–Alder cascade. By incubating oxanorbornadiene functionalized membranes 7b with cRGD

• pentapeptide 1b the cycloaddition product 8a was formed in the absence of any additives (Scheme 2). Prior to chemical reactions carried out with modified TPX materials, all reactions were first probed in solution (see Supporting Information File 1, section 2D). In order to analyze the outcome of 1,3-dipolar

Asymmetric synthesis of γ-chloro-α,β-diamino- and β,γ-aziridino-α-aminoacylpyrrolidines and -piperidines via stereoselective Mannich-type additions of N-(diphenylmethylene)glycinamides across α-chloro-N-sulfinylimines

• Gert Callebaut,
• Sven Mangelinckx,
• Pieter Van der Veken,
• Karl W. Törnroos,
• Koen Augustyns and
• Norbert De Kimpe

Beilstein J. Org. Chem. 2012, 8, 2124–2131, doi:10.3762/bjoc.8.239

• , comparable non-halogenated trans-imidazolidines were already synthesized by 1,3-dipolar cycloaddition of N-benzylidene glycine ester enolates across N-sulfinylaldimines in the presence of a Lewis acid [43]. The trans-stereochemistry of imidazolidine 12b was ensured by the vicinal coupling constant 3JH4-H5

Copper-catalyzed CuAAC/intramolecular C–H arylation sequence: Synthesis of annulated 1,2,3-triazoles

• Rajkumar Jeyachandran,
• Harish Kumar Potukuchi and
• Lutz Ackermann

Beilstein J. Org. Chem. 2012, 8, 1771–1777, doi:10.3762/bjoc.8.202

• Rutjes [68] as well as Sharpless [69] elegantly devised alternative approaches exploiting 1-haloalkynes [70], we became interested in exploring a single [71][72][73] inexpensive copper catalyst for one-pot reaction sequences comprising a 1,3-dipolar cycloaddition along with an intramolecular C–H bond

• sequential synthesis of 1,4-dihydrochromeno[3,4-d][1,2,3]triazole (4b, Scheme 2). We were delighted to observe that the desired reaction sequence consisting of a copper-catalyzed 1,3-dipolar cycloaddition and an intramolecular C–H bond arylation converted alkyne 1a to the desired product 4b with high

Chiral multifunctional thiourea-phosphine catalyzed asymmetric [3 + 2] annulation of Morita–Baylis–Hillman carbonates with maleimides

• Hong-Ping Deng,
• De Wang,
• Yin Wei and
• Min Shi

Beilstein J. Org. Chem. 2012, 8, 1098–1104, doi:10.3762/bjoc.8.121

• work of Lu [11][12][13][14][15][16][17][18][19][20], all phosphine-mediated [3 + 2] annulations proceeded through an important intermediate “1,3-dipolar synthon”. The formation of a 1,3-dipolar synthon by using a catalytic amount of phosphines have been directed toward the following two paths

• : phosphines attack the middle carbon atom of allenes to produce the 1,3-dipolar synthon (Scheme 1, reaction 1), and phosphines add to the β-position of MBH carbonate to remove carbon dioxide and tert-butanol, affording the 1,3-dipolar synthon (Scheme 1, reaction 2). Concerning the asymmetric [3 + 2

• /EtOAc 10:1–4:1) to provide compound 3. The ORTEP plot of compound 3r. 31P NMR spectra (161.9 MHz, CDCl3) of control experiments. Paths to the formation of 1,3-dipolar synthons by using a catalytic amount of phosphines. Proposed transition models. Dihydroxylation of 3c. Optimization of the reaction

Parallel solid-phase synthesis of diaryltriazoles

• Matthias Wrobel,
• Jeffrey Aubé and
• Burkhard König

Beilstein J. Org. Chem. 2012, 8, 1027–1036, doi:10.3762/bjoc.8.115

• – Huisgen 1,3-dipolar cycloaddition of solid-phase-immobilized azides with terminal alkynes by copper(I) catalysis: An azide-functionalized Wang resin 7 or 9 (1 equiv) was preswollen in dimethylformamide (1.5 mL/100 mg resin) for 2 h at room temperature. The copper(I) catalyst was prepared in situ by using

• steps with water, dimethylformamide, methanol and dichloromethane (each solvent 3 × 2 mL/100 mg resin) were carried out. GP 3 – Huisgen 1,3-dipolar cycloaddition of solid-phase-immobilized azides with terminal or internal alkynes by ruthenium(II) catalysis: The azide functionalized Wang resin (1 equiv

Parallel and four-step synthesis of natural-product-inspired scaffolds through modular assembly and divergent cyclization

• Hiroki Oguri,
• Haruki Mizoguchi,
• Hideaki Oikawa,
• Aki Ishiyama,
• Masato Iwatsuki,
• Kazuhiko Otoguro and
• Satoshi Ōmura

Beilstein J. Org. Chem. 2012, 8, 930–940, doi:10.3762/bjoc.8.105

• (Scheme 3). According to the previously reported protocol [22], Ugi reaction employing allylamine (31) and stepwise installation of a diazoimide group provided 35 in good yield. Upon treatment of 35 with Rh2(OAc)4 in benzene under reflux, 1,3-dipolar cycloaddition of the ylide intermediate with the

Thiophene-based donor–acceptor co-oligomers by copper-catalyzed 1,3-dipolar cycloaddition

• Stefanie Potratz,
• Amaresh Mishra and
• Peter Bäuerle

Beilstein J. Org. Chem. 2012, 8, 683–692, doi:10.3762/bjoc.8.76

• high yield and purity. Click reactions generally involve a Cu(I)-catalyzed version of the Huisgen 1,3-dipolar cycloaddition of terminal acetylenes and azides (CuAAC), to regioselectively yield 1,4-disubstituted 1H-1,2,3-triazoles [11][12]. In the meanwhile, this type of click reaction has become very

Carbohydrate-auxiliary assisted preparation of enantiopure 1,2-oxazine derivatives and aminopolyols

• Marcin Jasiński,
• Dieter Lentz and
• Hans-Ulrich Reissig

Beilstein J. Org. Chem. 2012, 8, 662–674, doi:10.3762/bjoc.8.74

• been introduced and broadly studied by Vasella and co-workers [14][15][16][17][18][19][20] and has also been used by other groups [21][22][23][24][25]. They observed moderate to high diastereoselectivities for 1,3-dipolar cycloadditions and for nucleophilic additions. Successful applications of these

Aryl nitrile oxide cycloaddition reactions in the presence of pinacol boronic acid ester

• Sarah L. Harding,
• Sebastian M. Marcuccio and
• G. Paul Savage

Beilstein J. Org. Chem. 2012, 8, 606–612, doi:10.3762/bjoc.8.67

• bonds, and 1,3-dipolar cycloaddition reactions to construct five-membered heterocycles are both powerful tools for assembling organic molecules. Used in combination, these tools offer great flexibility for strategies such as diversity-oriented synthesis [1], solution-phase combinatorial libraries [2

• convenient substrate would be the arylboronate nitrile oxide 1, which would undergo 1,3-dipolar cycloaddition to give isoxazolines 2. This latter compound could in turn be coupled with heterocycles or aryl groups to give insecticidal [5] derivatives of type 3 (Scheme 1). The utility of arylboronic acids and

• pinacolyl boronate esters have the advantage of being stable, readily handled compounds. The Huisgen 1,3-dipolar cycloaddition reaction is a powerful and versatile method for constructing five-membered heterocycles [12][13][14]. Nitrile oxide 1,3-dipoles react with carbon–carbon dipolarophiles, such as

Intramolecular carbenoid ylide forming reactions of 2-diazo-3-keto-4-phthalimidocarboxylic esters derived from methionine and cysteine

• Marc Enßle,
• Stefan Buck,
• Roland Werz and
• Gerhard Maas

Beilstein J. Org. Chem. 2012, 8, 433–440, doi:10.3762/bjoc.8.49

• rise to an annelated bicyclic substructure. In contrast, in our case as well as in [29], the olefinic dipolarophile is found as a substituent at a remote ring position of the cyclic carbonyl ylide, such that the intramolecular 1,3-dipolar cycloaddition generates a bridged oxabicyclo[3.2.1]octane

Synthesis of highly functionalized β-aminocyclopentanecarboxylate stereoisomers by reductive ring opening reaction of isoxazolines

• Melinda Nonn,
• Loránd Kiss,
• Reijo Sillanpää and
• Ferenc Fülöp

Beilstein J. Org. Chem. 2012, 8, 100–106, doi:10.3762/bjoc.8.10

• , University of Szeged, Eötvös u. 6, H-6720 Szeged, Hungary 10.3762/bjoc.8.10 Abstract A rapid and simple procedure was devised for the synthesis of multifunctionalized cyclic β-amino esters and γ-amino alcohols via the 1,3-dipolar cycloaddition of nitrile oxides to β-aminocyclopentenecarboxylates. The

Photochemical and thermal intramolecular 1,3-dipolar cycloaddition reactions of new o-stilbene-methylene-3-sydnones and their synthesis

• Kristina Butković,
• Željko Marinić,
• Krešimir Molčanov,
• Biserka Kojić-Prodić and
• Marija Šindler-Kulyk

Beilstein J. Org. Chem. 2011, 7, 1663–1670, doi:10.3762/bjoc.7.196

• hybrids of a number of mesomeric ionic structures (Figure 1). One of the most characteristic reactions of sydnones is the intermolecular 1,3-dipolar cycloaddition. In the presence of acetylenic or ethylenic dipolarophiles, sydnones undergo cycloaddition reactions, which can be induced thermally [4][6][7

• azomethine imines. Intramolecular 1,3-dipolar cycloadditions of sydnone derivatives have not been as thoroughly investigated, and so far only a few examples are known [18][19][20]. Photochemically induced intramolecular 1,3-dipolar cycloadditions have been studied on 3,4-disubstituted sydnone derivatives [18

• such a system, where two chromophores, stilbene and sydnone, are divided by a methylene bridge, an intramolecular 1,3-dipolar cycloaddition and the formation of diverse polycyclic compounds could be expected. Herein we describe, for the first time, the synthesis of cis- and trans-3-(stilbenylmethyl

Efficient synthesis of 1,3-diaryl-4-halo-1H-pyrazoles from 3-arylsydnones and 2-aryl-1,1-dihalo-1-alkenes

• Yiwen Yang,
• Chunxiang Kuang,
• Hui Jin,
• Qing Yang and
• Zhongkui Zhang

Beilstein J. Org. Chem. 2011, 7, 1656–1662, doi:10.3762/bjoc.7.195

• based on the condensation of hydrazines with 1,3-dicarbonyl compounds or their equivalents. However, the 1,3-dipolar cycloaddition offers a more convenient synthetic route. Sydnones are easily accessible aromatic compounds and versatile synthetic intermediates. They can be used as unusual, alternative

• unknown, as is the direct formation of 4-halopyrazoles through the [3 + 2] dipolar cycloaddition of sydnones. In the present study, a convenient and efficient synthesis of a series of new 1,3-diaryl-4-halo-1H-pyrazoles 3 in moderate to excellent yields is reported. The route employed involves 1,3-dipolar

• stirred in the dark in a sealed tube maintained at 140 °C in an oil bath. After 16 h, the product 3a was isolated in 72% yield. The effects of different bases, molar ratios of 1a to 2a, solvents, and temperatures on the formation of 3a were investigated. The optimization of the 1,3-dipolar cycloaddition

Multistep flow synthesis of vinyl azides and their use in the copper-catalyzed Huisgen-type cycloaddition under inductive-heating conditions

• Lukas Kupracz,
• Jan Hartwig,
• Jens Wegner,
• Sascha Ceylan and
• Andreas Kirschning

Beilstein J. Org. Chem. 2011, 7, 1441–1448, doi:10.3762/bjoc.7.168

• -type cycloadditions The copper-catalyzed Huisgen-type cycloaddition (CuAAC) is a general and useful method for the synthesis of 1,4-disubstituted-1,2,3-triazoles and is based on the 1,3-dipolar cycloaddition of alkynes and azides [28]. Besides Cu(I) sources also Cu(0) sources, such as copper wire [29