Identification of the p-coumaric acid biosynthetic gene cluster in Kutzneria albida: insights into the diazotization-dependent deamination pathway

• Seiji Kawai,
• Akito Yamada,
• Yohei Katsuyama and
• Yasuo Ohnishi

Beilstein J. Org. Chem. 2024, 20, 1–11, doi:10.3762/bjoc.20.1

• ) within 1 h. This property is probably due to the high stability of CmaA6. The high activity of CmaA6 makes it a useful tool for biochemical experiments and chemoenzymatic synthesis. Indeed, the discovery of CmaA6 allowed us to analyze the kinetics of the denitrification reaction catalyzed by AvaA7, which

1-Butyl-3-methylimidazolium tetrafluoroborate as suitable solvent for BF₃: the case of alkyne hydration. Chemistry vs electrochemistry

• Marta David,
• Elisa Galli,
• Richard C. D. Brown,
• Marta Feroci,
• Fabrizio Vetica and
• Martina Bortolami

Beilstein J. Org. Chem. 2023, 19, 1966–1981, doi:10.3762/bjoc.19.147

• pollutants. This also facilitates their recovery and recycling. Furthermore, they generally exhibit low flammability, high thermal and chemical stability, good thermal and electrical conductivity, together with the ability to solubilize organic and inorganic compounds of different polarity [78][79][80][81

• addition, with computational studies we demonstrated the greater stability of BF3 in BMIm-BF4 compared to BF3·Et2O [103]. Based on the ever increasing need to identify new eco-friendly catalysts and/or reaction media for the hydration of alkynes, and considering our previous works on ILs and

Studying specificity in protein–glycosaminoglycan recognition with umbrella sampling

• Mateusz Marcisz,
• Sebastian Anila,
• Margrethe Gaardløs,
• Martin Zacharias and
• Sergey A. Samsonov

Beilstein J. Org. Chem. 2023, 19, 1933–1946, doi:10.3762/bjoc.19.144

• interactions is important in understanding the nature of the interactions and the stability of the binding pose, including the scenario when several co-existing binding poses are identified. We analyze the binding interactions between the GAGs heparin, heparan sulfate, and chondroitin sulfate, and the proteins

Beyond n-dopants for organic semiconductors: use of bibenzo[d]imidazoles in UV-promoted dehalogenation reactions of organic halides

• Kan Tang,
• Megan R. Brown,
• Chad Risko,
• Melissa K. Gish,
• Garry Rumbles,
• Phuc H. Pham,
• Oana R. Luca,
• Stephen Barlow and
• Seth R. Marder

Beilstein J. Org. Chem. 2023, 19, 1912–1922, doi:10.3762/bjoc.19.142

• and/or light. This may be attributable to the lower stability and greater reactivity of aryl radicals relative to that of their benzyl counterparts. Indeed, aryl radicals are known to abstract H• from THF [30][31] and presumably do so in the present reactions before any further reactions can occur

Biphenylene-containing polycyclic conjugated compounds

• Cagatay Dengiz

Beilstein J. Org. Chem. 2023, 19, 1895–1911, doi:10.3762/bjoc.19.141

• exhibit significant stability problems when their conjugation enhances. Various approaches have been developed to address this stability concern. Among these strategies, one involves the incorporation of the biphenylene unit into acene frameworks, limiting the electron delocalization through the

• understanding the correlations between structure and electronic properties, as these units serve as fundamental building blocks in graphite and carbon nanotubes [3]. The limited stability of this particular class of PAHs arises as a key challenge, primarily attributed to their extended conjugation. The longer

• acenes exhibit increased reactivity, readily undergoing processes of oxidation and dimerization, consequently disrupting the molecular conjugation [4]. This instability poses a significant obstacle in their widespread application across various devices [4]. The decline in stability seen in larger acenes

Anion–π catalysis on carbon allotropes

• M. Ángeles Gutiérrez López,
• Mei-Ling Tan,
• Giacomo Renno,
• Augustina Jozeliūnaitė,
• J. Jonathan Nué-Martinez,
• Javier Lopez-Andarias,
• Naomi Sakai and
• Stefan Matile

Beilstein J. Org. Chem. 2023, 19, 1881–1894, doi:10.3762/bjoc.19.140

• because it took some time to find the benchmark reaction needed to develop the catalysts (Figure 2) [2]. With this operational enolate chemistry in hand, it quickly became clear that increasing π acidity at the same time decreases the stability of the catalyst [3][4][5]. This suggested that induced rather

Aromatic systems with two and three pyridine-2,6-dicarbazolyl-3,5-dicarbonitrile fragments as electron-transporting organic semiconductors exhibiting long-lived emissions

• Karolis Leitonas,
• Brigita Vigante,
• Dmytro Volyniuk,
• Audrius Bucinskas,
• Pavels Dimitrijevs,
• Sindija Lapcinska,
• Pavel Arsenyan and
• Juozas Vidas Grazulevicius

Beilstein J. Org. Chem. 2023, 19, 1867–1880, doi:10.3762/bjoc.19.139

• film of compound 8 showed a more than twice lower PLQY which was enhanced using the mCP host. The other compounds showed similar PLQY trends (Table 1). Thermal properties The thermal stability and phase transitions of the synthesized derivatives 6–9 were investigated utilizing thermogravimetric

• of compounds 6–9 was observed. The Tg values of the derivatives increase gradually by 5–12 °C starting from compound 6 which possesses the lowest molecular weight (M = 1566 g/mol) up to compound 9 which possesses the highest M value (2424 g/mol) [13]. A high thermal stability was observed for all

• with pyridine-3,5-dicarbonitrile fragments demonstrated a range of attractive properties, including efficient TADF, favorable charge transport, and thermal stability. These findings open up new possibilities for the design and development of high-performance OLEDs and other organic electronic devices

Thienothiophene-based organic light-emitting diode: synthesis, photophysical properties and application

• Recep Isci and
• Turan Ozturk

Beilstein J. Org. Chem. 2023, 19, 1849–1857, doi:10.3762/bjoc.19.137

• under N2 atmosphere (Figure 4). The initial mass loss (5%) around 120 °C could be due to residual water and/or solvent. The highest decomposition was observed at around 405 oC and 14% of DMB-TT-TPA (8) remained without ash up to 750 °C, indicating that the compound has an excellent thermal stability

• . The high thermal stability is profitable for the preparation of stable and durable OLED devices. Computational chemistry Ground-state geometry optimization of DMB-TT-TPA (8) was performed using density functional theory (DFT) calculations with the Gaussian 16 software at the B3LYP/6-31G (d,p) level

N-Boc-α-diazo glutarimide as efficient reagent for assembling N-heterocycle-glutarimide diads via Rh(II)-catalyzed N–H insertion reaction

• Grigory Kantin,
• Pavel Golubev,
• Alexander Sapegin,
• Alexander Bunev and
• Dmitry Dar’in

Beilstein J. Org. Chem. 2023, 19, 1841–1848, doi:10.3762/bjoc.19.136

• , the proposed diazo reagent 4 possesses several drawbacks, primarily, insufficient stability during storage and comparatively low solubility in non-polar solvents, as well as complications when isolating it in a pure form. This study focuses on the development of a "diazo" technique to incorporate a

• simplified the process of isolating compound 5, as compared to the prior publication [26], and notably increased its stability. Furthermore, the solubility of the new diazo reagent in non-polar solvents, particularly DCM, was significantly improved, leading to a beneficial impact on the course of Rh(II

Substituent-controlled construction of A₄B₂-hexaphyrins and A₃B-porphyrins: a mechanistic evaluation

• Seda Cinar,
• Dilek Isik Tasgin and
• Canan Unaleroglu

Beilstein J. Org. Chem. 2023, 19, 1832–1840, doi:10.3762/bjoc.19.135

• their structural stability, flexibility, or complexing ability with transition metals [6][7][8][9][10][11][12]. meso-Aryl-substituted dipyrromethanes or tripyrranes are the most commonly used starting materials in hexaphyrin syntheses [13][14][15][16]. Osuka et al. made significant contributions to the

Active-metal template clipping synthesis of novel [2]rotaxanes

• Cătălin C. Anghel,
• Teodor A. Cucuiet,
• Niculina D. Hădade and
• Ion Grosu

Beilstein J. Org. Chem. 2023, 19, 1776–1784, doi:10.3762/bjoc.19.130

• (Figure 2) were designed to be obtained from precursors containing two 1,4-dioxobenzene fragments required to facilitate π–π interactions with the pyridine unit in the axle (compound 6 in Scheme 1) and confer stability to the supramolecular complex necessary for the formation of [2]rotaxanes. For the

Selectivity control towards CO versus H₂ for photo-driven CO₂ reduction with a novel Co(II) catalyst

• Lisa-Lou Gracia,
• Philip Henkel,
• Olaf Fuhr and
• Claudia Bizzarri

Beilstein J. Org. Chem. 2023, 19, 1766–1775, doi:10.3762/bjoc.19.129

• (26.6 ppm) in the Earth crust [26]. Although it should not be considered a cost-effective option at present, as several social and environmental concerns are associated with its extraction, the high stability of the Co(II) ion and the versatility of the ligands used for coordination offer some

Charge carrier transport in perylene-based and pyrene-based columnar liquid crystals

• Alessandro L. Alves,
• Simone V. Bernardino,
• Carlos H. Stadtlober,
• Edivandro Girotto,
• Giliandro Farias,
• Rodney M. do Nascimento,
• Sergio F. Curcio,
• Thiago Cazati,
• Marta E. R. Dotto,
• Juliana Eccher,
• Leonardo N. Furini,
• Hugo Gallardo,
• Harald Bock and
• Ivan H. Bechtold

Beilstein J. Org. Chem. 2023, 19, 1755–1765, doi:10.3762/bjoc.19.128

• derivatives are among the most investigated due to their easy functionalization, high chemical and thermal stability, strong photoluminescence, and n-type semiconductor character. They tend to adopt columnar organization due to the strong π–π interaction of the rigid cores, providing a path for the efficient

Trifluoromethylated hydrazones and acylhydrazones as potent nitrogen-containing fluorinated building blocks

• Zhang Dongxu

Beilstein J. Org. Chem. 2023, 19, 1741–1754, doi:10.3762/bjoc.19.127

• lipophilicity and metabolic stability compared to nonfluorinated compounds [1][2][3][4][5]. At present, about 300 drug molecules and over 400 pesticides on the market contain at least one fluorine atom [6][7]. Therefore, the development of novel and effective synthetic methodologies for the synthesis of

Unprecedented synthesis of a 14-membered hexaazamacrocycle

• Anastasia A. Fesenko and
• Anatoly D. Shutalev

Beilstein J. Org. Chem. 2023, 19, 1728–1740, doi:10.3762/bjoc.19.126

• splitting of the macrocyclic ring in 5. The relatively low stability and tendency to disintegration of the macrocyclic ring in 5 can be explained by its somewhat anti-aromatic character (see above). Conclusion In conclusion, self-assembly of 14-membered 1,2,4,8,9,11-hexaazamacrocycle annulated with two

Effects of the aldehyde-derived ring substituent on the properties of two new bioinspired trimethoxybenzoylhydrazones: methyl vs nitro groups

• Dayanne Martins,
• Roberta Lamosa,
• Talis Uelisson da Silva,
• Carolina B. P. Ligiero,
• Sérgio de Paula Machado,
• Daphne S. Cukierman and
• Nicolás A. Rey

Beilstein J. Org. Chem. 2023, 19, 1713–1727, doi:10.3762/bjoc.19.125

• stability in aqueous medium. Thus, the electronic absorption spectra of hdz-CH3 and hdz-NO2 were recorded in a 10% DMSO/buffer solution (pH 7.4) immediately after preparation and at regular time intervals. The UV–vis spectrum of hdz-CH3 between 250 and 450 nm (Figure 6A) shows two multicomponent absorptions

• electron-donating group decreases the compound’s hydrolysis rate and therefore improves its suitability for uses demanding physiological-like conditions. On the other hand, the presence of the –NO2 group has a very pronounced effect on the pKa of the phenol moiety and, to a lesser extent, on the stability

• structures (Figure S4), experimental and calculated geometric parameters (Tables S1 and S2) and vibrational assignments (Tables S3 and S4), 13C, COSY, HMBC and HSQC spectra (Figures S5–S12) and the full NMR characterization (Table S5) for both hydrazones reported herein. Hydrolytic stability of hdz-NO2 at pH

Quinoxaline derivatives as attractive electron-transporting materials

• Zeeshan Abid,
• Liaqat Ali,
• Sughra Gulzar,
• Faiza Wahad,
• Raja Shahid Ashraf and
• Christian B. Nielsen

Beilstein J. Org. Chem. 2023, 19, 1694–1712, doi:10.3762/bjoc.19.124

• their performance as electron acceptors. Researchers have focused on improving multi-dimensional electron transport, enhancing electron injection, addressing stability concerns, optimizing side chain engineering, and refining fabrication processes. One notable study by Wang et al. demonstrated the

• ]thiophene in different ratios to produce three copolymers, Qx1a, Qx1b and Qx1c (Figure 2). This strategy reduced aggregation and improved the performance and stability of copolymers, with Qx1c achieving a PCE of 4.81% with PTB7-Th donor in an all-PSC device. Moreover, the broadened absorption band indicated

• recent study by Eedugurala et al., a terachlorobenzene ring were fused to the [1,2,5]thiadiazolo[3,4-g]quinoxaline unit in the polymer backbone of Qx6 which enhanced the stability of the polymer and led to its high-spin configuration compared to the analogous material Qx5 featuring 6,7-dimethyl-[1,2,5

A deep-red fluorophore based on naphthothiadiazole as emitter with hybridized local and charge transfer and ambipolar transporting properties for electroluminescent devices

• Suangsiri Arunlimsawat,
• Patteera Funchien,
• Pongsakorn Chasing,
• Atthapon Saenubol,
• Taweesak Sudyoadsuk and
• Vinich Promarak

Beilstein J. Org. Chem. 2023, 19, 1664–1676, doi:10.3762/bjoc.19.122

• scanning calorimetry (DSC) under N2 atmosphere at a scanning rate of 10 °C min−1. As displayed in Figure 5a, the compound has a high thermal stability with a decomposition temperature at 5% weight loss (T5d) of 498 °C, a glass transition temperature (Tg) of 236 °C, and a melting temperature (Tm) of 376 °C

• . The high Tg may enhance the morphological thin film stability and film integrity of TPECNz during device fabrication. While the high Tm suggests that TPECNz can withstand the latent heat generated during the device fabrication and operation. These results signaled that TPECNz may be suitable for

• demonstrated high emission stability with EL spectra under different operating voltages (6–9 V) revealing an unchanged profile with a single emission band (Figure 7b), indicating the recombination zone of the excitons confined inside the EML. No emission peaks at low wavelengths from the supporting layers (NPB

Benzoimidazolium-derived dimeric and hydride n-dopants for organic electron-transport materials: impact of substitution on structures, electrochemistry, and reactivity

• Swagat K. Mohapatra,
• Khaled Al Kurdi,
• Samik Jhulki,
• Georgii Bogdanov,
• John Bacsa,
• Maxwell Conte,
• Tatiana V. Timofeeva,
• Seth R. Marder and
• Stephen Barlow

Beilstein J. Org. Chem. 2023, 19, 1651–1663, doi:10.3762/bjoc.19.121

• wide range of semiconductors, they must exhibit low ionization energies and thus air sensitivity. One approach to circumvent this issue is to identify systems where the electron-transfer process is coupled to other chemical reactions, increasing the kinetic stability of the dopant to air, and thus

• only introduced in n-dopants in 2010, when Bao and co-workers reported the use of N-DMBI-H (1bH, Figure 1) to n-dope fullerenes [7]. Although widely used, due to their facile synthesis, structural tunability, and good air stability in the solid state, 1H derivatives are relatively limited in dopant

• in 1984 [12]. More recently, dimers 1b2–1f2 (Figure 1) have been used as n-dopants [13][14][15][16][17][18][19][20]. They behave similarly to the closed-shell dimers formed by certain 19-electron transition-metal sandwich compounds [21][22][23], exhibiting moderate air stability and acting as quite

Tying a knot between crown ethers and porphyrins

• Maksym Matviyishyn and
• Bartosz Szyszko

Beilstein J. Org. Chem. 2023, 19, 1630–1650, doi:10.3762/bjoc.19.120

• appreciable effects. Furthermore, zinc(II) porphyrins 1-Zn and TriCP-Zn bound potassium cations forming dimeric assemblies 2, as demonstrated by the absorption and 1H NMR spectra. Although DCP-Zn and MCP-Zn were also capable of forming dimers, the highest stability and the largest level of attraction between

• 1.70–2.50 ns. An apparent colour change was observed upon treatment of 42 with AgSbF6 and CuCl2, indicating radical cation formation 42•+. ESR spectra and coulometric oxidation experiments further supported the presence and stability of the radical species. The reactions of 38 with a pre-functionalized

• single crystal XRD. Compound 43 formed stable cation radicals upon adding different oxidising agents, such as AgSbF6, TFA, and CuCl2. The cation radicals showed relative stability and remained undeteriorated on air for over a week. The crowned porphyrinoids incorporating two pyrroloindole units 44 were

A series of perylene diimide cathode interlayer materials for green solvent processing in conventional organic photovoltaics

• Kathryn M. Wolfe,
• Shahidul Alam,
• Eva German,
• Fahad N. Alduayji,
• Maryam Alqurashi,
• Frédéric Laquai and
• Gregory C. Welch

Beilstein J. Org. Chem. 2023, 19, 1620–1629, doi:10.3762/bjoc.19.119

• detrimental to device performance and long-term stability. Second, efficiency is increased by tuning the frontier molecular orbitals to block holes by a deep highest occupied molecular orbital (HOMO) and by promoting electron cascade with a deep lowest unoccupied molecular orbital (LUMO). Third, CILs prevent

• transport, exhibit high thermal stability, are highly tunable in terms of their physical and chemical properties, and can be readily doped thereby increasing electronic conductivity. Some of the most widely used PDI materials for CILs are PDIN [14], PDINN [15], and PDINO (Figure 1a) [14][15]. Past work in

• nitrile functional group would stabilize both the HOMO and LUMO, where a deep-lying LUMO energy level is sought after for increased stability of electron-transporting materials [25]. Additionally, the presence of a nitrile group introduces an additional means for intermolecular bonding between the CILs

Radical chemistry in polymer science: an overview and recent advances

• Zixiao Wang,
• Feichen Cui,
• Yang Sui and
• Jiajun Yan

Beilstein J. Org. Chem. 2023, 19, 1580–1603, doi:10.3762/bjoc.19.116

• negative free energy of polymerization and the latter an adequate reactivity of the monomer, stability of the derived free radical, and a low proportion of side reactions. A slow rate of chain initiation, a fast rate of chain propagation, and a rapid rate of chain termination are key features of

Cyclodextrins permeabilize DPPC liposome membranes: a focus on cholesterol content, cyclodextrin type, and concentration

• Ghenwa Nasr,
• Hélène Greige-Gerges,
• Sophie Fourmentin,
• Abdelhamid Elaissari and
• Nathalie Khreich

Beilstein J. Org. Chem. 2023, 19, 1570–1579, doi:10.3762/bjoc.19.115

• improves the chemical stability and aqueous solubility of the guest molecule and results in most of the cases in the formation of a water-soluble CD–guest complex [3]. Being recognized as non-toxic, biodegradable, and sustainable carriers, CDs have attracted wide interest as potential carriers in different

• (liposomes and CDs) was shown to combine the advantages of each separate system and to circumvent the drawbacks of liposomes and the problems associated with CDs: for instance, studies reported that the DCL increased the entrapment of hydrophobic drugs in liposomes and enhanced the vesicle stability. The DCL

• not considered in the literature despite the remarkable effect of CHOL on the stability of the lipid bilayer. In fact, CHOL can greatly modulate the membrane permeability: a previous work showed that increasing the CHOL content in the membrane results in a decrease in the membrane permeability in a

Synthesis of 5-arylidenerhodanines in L-proline-based deep eutectic solvent

• Stéphanie Hesse

Beilstein J. Org. Chem. 2023, 19, 1537–1544, doi:10.3762/bjoc.19.110

• promising emerging class of green solvents as they offer numerous advantages, such as low volatility, non-flammability, chemical and thermal stability, recyclability, and above all a good biodegradability [10]. Moreover, their synthesis is usually easy and cheap as DES are formed by simply mixing an H-bond

Complexes of resorcin[4]arene with secondary amines: synthesis, solvent influence on “in-out” structure, and theoretical calculations of non-covalent interactions

• Waldemar Iwanek

Beilstein J. Org. Chem. 2023, 19, 1525–1536, doi:10.3762/bjoc.19.109

• role in their self-association and the formation of larger supramolecular structures such as dimers [3], hexamers [4][5], octamers [6], and nano-aggregates [7]. The stability of these structures is highly reliant on the type of solvent used. Most of the works are studies of non-polar environments such

• geometries of the complexes were calculated using DFT methods. To evaluate the energy stability of the formed complexes, the HFLD method was employed to quantify the contributions of different non-covalent interactions. As shown below, the combination of two types of interactions, one of which is hydrophobic