Fritsch–Buttenberg–Wiechell rearrangement of magnesium alkylidene carbenoids leading to the formation of alkynes

• Tsutomu Kimura,
• Koto Sekiguchi,
• Akane Ando and
• Aki Imafuji

Beilstein J. Org. Chem. 2021, 17, 1352–1359, doi:10.3762/bjoc.17.94

• olefination of 4,4'-dimethoxybenzophenone with methoxy(trimethylsilyl)methyl p-tolyl sulfide, and oxidation of the resulting 1-methoxyvinyl p-tolyl sulfide with mCPBA (Scheme 3b) [17]. The 1-chlorovinyl p-tolyl sulfoxides 2e–g were prepared through a one-pot procedure (Scheme 3c) [15]. The HWE reagent was

• generated in situ from chloromethyl p-tolyl sulfoxide, diethyl chlorophosphate, and LDA, and the reaction of the HWE reagent with carbonyl compounds gave sulfoxides 2e–g. The 2,2-disubstituted sulfoxides 2b–d, which could not be prepared by the one-pot HWE reaction, were prepared through a stepwise method

Icilio Guareschi and his amazing “1897 reaction”

• Gian Cesare Tron,
• Alberto Minassi,
• Giovanni Sorba,
• Mara Fausone and
• Giovanni Appendino

Beilstein J. Org. Chem. 2021, 17, 1335–1351, doi:10.3762/bjoc.17.93

• Guareschi” [42]. Triacetonamine bears a certain similarity to tropinone (9), the heterocyclic core of tropane alkaloids, and the one-pot preparation from acetone and ammonia reminds of, and anticipates by two decades, the Robinson synthesis of tropinone and the Willstätter synthesis of the corresponding 2

A comprehensive review of flow chemistry techniques tailored to the flavours and fragrances industries

• Guido Gambacorta,
• James S. Sharley and
• Ian R. Baxendale

Beilstein J. Org. Chem. 2021, 17, 1181–1312, doi:10.3762/bjoc.17.90

Synthesis of functionalized imidazo[4,5-e]thiazolo[3,2-b]triazines by condensation of imidazo[4,5-e]triazinethiones with DMAD or DEAD and rearrangement to imidazo[4,5-e]thiazolo[2,3-c]triazines

• Alexei N. Izmest’ev,
• Dmitry B. Vinogradov,
• Natalya G. Kolotyrkina,
• Angelina N. Kravchenko and
• Galina A. Gazieva

Beilstein J. Org. Chem. 2021, 17, 1141–1148, doi:10.3762/bjoc.17.87

• ]triazines 3a,b with DMAD or DEAD led always to the formation of compounds 4a,b,h,i along with their isomeric structures 5a,b,h,i, an attempt was made to sequentially obtain and convert the resulting mixtures of compounds 4 and 5 into the individual isomers 5 in a one-pot mode (Scheme 5). The plausible

• imidazo[4,5-e]thiazolo[3,2-b]triazines 4a–n into imidazo[4,5-e]thiazolo[2,3-c]triazines 5a–n. One-pot synthesis of compounds 5a,b,h,i from imidazo[4,5-e]triazines 3a,b. Plausible mechanism of the formation and the rearrangement of compounds 4 into isomers 5. Results for the screening of the reaction

N-tert-Butanesulfinyl imines in the asymmetric synthesis of nitrogen-containing heterocycles

• Joseane A. Mendes,
• Paulo R. R. Costa,
• Miguel Yus,
• Francisco Foubelo and
• Camilla D. Buarque

Beilstein J. Org. Chem. 2021, 17, 1096–1140, doi:10.3762/bjoc.17.86

• reactions, amino diesters 89 being isolated as single diastereoisomers (Scheme 27). Removal of the sulfinyl group under acidic conditions, and further treatment of the resulting ammonium salts with sodium ethoxide, yielded α-methylene-γ-butyrolactams 90, in a one-pot, two-step process [103]. A six-membered

• -tert-butanesulfinyl α-alkoxy aldimines 126 [124]. In this one-pot approach, a successive nucleophilic addition–cyclization–desulfinylation took place, leading directly to piperidinones 127. The reactions were performed in THF at −78 °C for 3 hours. Yields ranged from moderate to excellent with

• co-workers described the diastereoselective synthesis of 1-substituted isoquinolones using one-pot addition–cyclization–deprotection of the imine with Grignard reagents [130]. In this work, the addition to chiral imines 146, 148 and 150 was performed using 2,2’-dipyridyl- or 4-methylmorpholine (NMM

Synthetic accesses to biguanide compounds

• Oleksandr Grytsai,
• Cyril Ronco and
• Rachid Benhida

Beilstein J. Org. Chem. 2021, 17, 1001–1040, doi:10.3762/bjoc.17.82

• electrophilic attack takes place at the more reactive angular position of the aromatic ring, but in case of a substantial steric hindrance, the linear isomer is formed (Scheme 27). Later, this SEAr reactivity was used for the synthesis of pyrroloquinazoline from 5-aminoindole [63]. Contrary to the one-pot

• apparition of side-products and a drop of the yields (Scheme 40). Recently, a one-pot reaction was reported by Yavari and Nematpour that includes the formation of an hexasubstituted biguanide from TMG, and a copper-catalyzed N-arylation [81]. Using TMG and DIC/DCC as reagents, and 10 mol % of CuI

Application of the Meerwein reaction of 1,4-benzoquinone to a metal-free synthesis of benzofuropyridine analogues

• Rashmi Singh,
• Tomas Horsten,
• Rashmi Prakash,
• Swapan Dey and
• Wim Dehaen

Beilstein J. Org. Chem. 2021, 17, 977–982, doi:10.3762/bjoc.17.79

• to hydroquinone 12 with N,N-diethylhydroxylamine (N,N-DEHA) and cyclized via intramolecular nucleophilic aromatic substitution to isolate 6-hydroxybenzofuro[2,3-b]pyridine (13) with 82% yield. Conveniently, the synthesis of 13 was achieved in a one-pot reaction from 11 with no significant differences

Prins cyclization-mediated stereoselective synthesis of tetrahydropyrans and dihydropyrans: an inspection of twenty years

• Asha Budakoti,
• Pradip Kumar Mondal,
• Prachi Verma and
• Jagadish Khamrai

Beilstein J. Org. Chem. 2021, 17, 932–963, doi:10.3762/bjoc.17.77

• allylisilane 152. Further manipulation of functional groups of 153 leads to the synthesis of (−)-dactyloide (Scheme 36) [71]. The one-pot synthesis of a 2,6-disubstituted THP was reported by Minehan and co-workers and involved treating 3-iodo-2-[(trimethylsilyl)methyl]propene with an aldehyde in the presence

• Alder’s chair-like transition state 227 in which the (Z)-alkene accounts for the trans-stereocontrol at the C3 position and equatorial iodide addition accounts for the cis-stereocontrol at the C4 position, as shown below in Scheme 54. The one-pot synthesis of tetrahydropyran by utilizing the Babier–Prins

Microwave-assisted multicomponent reactions in heterocyclic chemistry and mechanistic aspects

• Shivani Gulati,
• Stephy Elza John and
• Nagula Shankaraiah

Beilstein J. Org. Chem. 2021, 17, 819–865, doi:10.3762/bjoc.17.71

• majority of the atoms of the starting materials. The ability of forming multiple bonds in one-pot via a multicomponent reaction provides a novel and sustainable method in drug discovery [4]. In the recent years, these reactions have emerged as a promising strategy following green chemistry principles such

• provided an easy access to the synthesis of complex bioactive molecules with multiple point diversity incorporating up to eight components in one-pot [8]. The pharmaceutical industry has witnessed a considerable surge in drug synthesis via multicomponent strategies [9][10][11], including the synthesis of

• ]. Therefore, researchers have quested upon generation of pyrans and benzopyrans employing MCR powered by microwave assistance. For instance, Tu and co-workers [55] reported a one-pot two-step tandem procedure subjecting phenylenediamine 23, 2-hydroxynaphthalene-1,4-diones (11), aldehyde 5 with malononitrile

Synthesis of bis(aryloxy)fluoromethanes using a heterodihalocarbene strategy

• Carl Recsei and
• Yaniv Barda

Beilstein J. Org. Chem. 2021, 17, 813–818, doi:10.3762/bjoc.17.70

• reactant ratios, the identity of the base and admixture of potential catalysts such as tetrabutylammonium iodide or DABCO showed no improvement in product ratios. Using superstoichiometric 6 and base with chlorodifluoromethane in a bid to form and react 5 in a one-pot protocol were unsuccessful, even after

[2 + 1] Cycloaddition reactions of fullerene C₆₀ based on diazo compounds

• Yuliya N. Biglova

Beilstein J. Org. Chem. 2021, 17, 630–670, doi:10.3762/bjoc.17.55

• stage, viz, it becomes necessary to preliminarily halogenate the cyclopropanating agent. As a rule, a hardly separable mixture of mono- and dihalo-containing products is formed. The Hirsch-modified Bingel method makes it possible to isolate methanofullerenes by a one-pot reaction using simultaneously

• , Wudl, et al. [96] performed an optimized methanofullerene synthesis by carrying out the cyclopropanation in the one-pot version presented in reference [83]. Therein, fullerene was added directly to the solution of tosylhydrazone in the presence of a base. This procedure makes it possible to generate

Valorisation of plastic waste via metal-catalysed depolymerisation

• Francesca Liguori,
• Carmen Moreno-Marrodán and
• Pierluigi Barbaro

Beilstein J. Org. Chem. 2021, 17, 589–621, doi:10.3762/bjoc.17.53

• ]. The remarkable activity was attributed to the dual effect of base and acid catalysis, in addition to the solubility of the catalyst in EG. It is worth mentioning that, in addition to the recovery of chemicals via chemolytic processes, repurposing techniques of PET were developed based on one-pot, two

• chloride) compounds [243]. One-pot depolymerisation–polycondensation reactions were developed to produce random copolyesters poly(ethylene terephthalate-co-adipate) from PET in the presence of EG and adipic acid [244]. The depolymerisation step was carried out using a zinc acetate catalyst (1 wt %), with

• no need of excess of chemicals. Polymerisation was then achieved by raising the reaction temperature, without purification of the intermediate oligomers being required. An interesting one-pot process was developed that combines the use of bioderived chemicals, isosorbide and succinic acid, with PET

Synthesis of (Z)-3-[amino(phenyl)methylidene]-1,3-dihydro-2H-indol-2-ones using an Eschenmoser coupling reaction

• Lukáš Marek,
• Lukáš Kolman,
• Jiří Váňa,
• Jan Svoboda and
• Jiří Hanusek

Beilstein J. Org. Chem. 2021, 17, 527–539, doi:10.3762/bjoc.17.47

• atmosphere at −20 °C. Quite a clean formation of the triflate 1i was observed in an NMR tube but all attempts to isolate the pure compound 1i in a preparative scale failed. Therefore, we decided to carry out an Eschenmoser coupling reaction in a one-pot manner. Into a chilled solution of 3-hydroxy-N

• -dimethylthiobenzamide (4a) the same one-pot method gives only 18% of the product 6ad (cf. with 43% from 1a) and 27% (without thiophile) of 7aa (cf. with 86% from 1a). It was obvious that an improved synthetic approach would necessitate the protection of the oxindole nitrogen avoiding the formation of the undesired N-Tf

• -hydroxyoxindole and a one-pot triflation/Eschenmoser coupling with thiobenzamides under an inert atmosphere. However, this procedure is only suited for the preparation starting from N-methyl-3-hydroxyoxindole in which excessive N-triflication is blocked and the overall yield of 1-methyl-3-(aminomethylidene)-1,3

Synthesis of N-perfluoroalkyl-3,4-disubstituted pyrroles by rhodium-catalyzed transannulation of N-fluoroalkyl-1,2,3-triazoles with terminal alkynes

• Olga Bakhanovich,
• Viktor Khutorianskyi,
• Vladimir Motornov and
• Petr Beier

Beilstein J. Org. Chem. 2021, 17, 504–510, doi:10.3762/bjoc.17.44

• regioselectivities (87:13 to 98:2). This is the first report of a transannulation leading to 3,4-disubstituted pyrroles. Additionally, the method did not require the use of a silver(I) co-catalyst. The scope for aliphatic alkynes is reasonably wide and the isolated yields were moderate to good. A one-pot

Deoxygenative C2-heteroarylation of quinoline N-oxides: facile access to α-triazolylquinolines

• Geetanjali S. Sontakke,
• Rahul K. Shukla and
• Chandra M. R. Volla

Beilstein J. Org. Chem. 2021, 17, 485–493, doi:10.3762/bjoc.17.42

• isoquinolines was achieved from readily available N-oxides and N-sulfonyl-1,2,3-triazoles. A variety of α-triazolylquinoline derivatives were synthesized with good regioselectivity and in excellent yields under mild reaction conditions. Further, a gram-scale and one-pot synthesis illustrated the efficacy and

• derivatives, we performed a sequential one-pot synthesis by combining a Cu(I)-catalyzed “Click” reaction of phenylacetylene (7) with TsN3 and a metal-free C2-heteroarylation of quinoline N-oxide (1a, Scheme 6b). Remarkably, the yield of the desired product 3a in the one-pot synthesis (80%) was comparable to

• isoquinoline N-oxide. Gram-scale and one-pot synthesis. Proposed mechanism. Optimization of the reaction conditions.a Supporting Information Supporting Information File 220: Experimental details. Funding The activity was generously supported by Science and Engineering Research Board (SERB), India: CRG/2019

Synthetic strategies of phosphonodepsipeptides

• Jiaxi Xu

Beilstein J. Org. Chem. 2021, 17, 461–484, doi:10.3762/bjoc.17.41

• the N-Cbz-1-aminophosphonic monomethyl esters 12b,d and hydroxy esters 106 followed by the selective demethylation with TMSBr in a one-pot reaction. The method provides a mild route to prepare phosphonodepsipeptides. The yields were insensitive to the steric encumbrance of both reactants being coupled

• directly. The multicomponent condensation reaction was applied as a direct synthetic method for phosphonodepsipeptides via the formation of 1-aminoalkylphosphonic acids and simultaneous construction of the phosphonate bond. A series of phosphonodepsipeptides 158 was prepared in good yields in a one-pot

• -aminoalkanesulfonamides by using this strategy. Also side-chain functionalized phosphonodepsipeptides 160 were prepared in satisfactory yields directly through the one-pot reactions of benzyl carbamate (154), aldehydes 155, and diethyl (R,R)-2-chloro-1,3,2-dioxaphospholane-4,5-dicarboxylate (159), which was synthesized

CF₃-substituted carbocations: underexploited intermediates with great potential in modern synthetic chemistry

• Anthony J. Fernandes,
• Armen Panossian,
• Bastien Michelet,
• Agnès Martin-Mingot,
• Frédéric R. Leroux and
• Sébastien Thibaudeau

Beilstein J. Org. Chem. 2021, 17, 343–378, doi:10.3762/bjoc.17.32

• –Crafts arylation at the C4-position led to derivatives 76. In this latter case, a two-step one-pot process was developed in order to access derivatives bearing two different aromatic rings. Mechanistic investigations were then undertaken by in situ low-temperature NMR experiments, allowing the

• . reported the acid-catalyzed mono- and diarylation of CF3-substituted α,β-ynones 152a [98], Wu et al. reported the one-pot two-step acid-catalyzed diarylation of trifluoroacetyl coumarins 152b [99], and Yuan et al. reported the acid-catalyzed diarylation of CF3-substituted cyclopropyl ketone 152c [100

• iminium ion 192 by Lewis acid activation was suggested by the authors (Scheme 46). The resulting CF3-substituted β-amino ketones 190 could then be efficiently transformed in a one-pot procedure into the corresponding CF3-substituted enones 191 upon Brønsted acid treatment. Langlois and Billard then

Hydrazides in the reaction with hydroxypyrrolines: less nucleophilicity – more diversity

• Dmitrii A. Shabalin,
• Evgeniya E. Ivanova,
• Igor A. Ushakov,
• Elena Yu. Schmidt and
• Boris A. Trofimov

Beilstein J. Org. Chem. 2021, 17, 319–324, doi:10.3762/bjoc.17.29

• saturated pyridazine scaffolds is both highly topical and necessary. Recently, we have developed a convenient approach to the 1,4-dihydropyridazine core based on the Brønsted acid-catalyzed regioselective recyclization of 5-hydroxypyrrolines (assembled in a one-pot manner from ketoximes and acetylene gas [8

• (Table 1, entries 7–11). Finally, the best isolated yield of 1,4-dihydropyridazine 4aa (74%) was achieved by a two-step, one-pot protocol, comprising the initial recyclization of hydroxypyrroline 1a with 2 equiv of benzohydrazide (2a) in refluxing acetonitrile for 3 h in the presence of 10 mol % of TFA

• of analytically pure samples were obtained in 57–93% isolated yields (Scheme 2). When the same set of hydroxypyrrolines 1a–e and hydrazides 2a–g was subjected to the two-step, one-pot protocol, the desired 1,4-dihydropyridazines 4 were formed in 20–74% isolated yields (Scheme 3). Electron-rich

Decarboxylative trifluoromethylthiolation of pyridylacetates

• Ryouta Kawanishi,
• Kosuke Nakada and
• Kazutaka Shibatomi

Beilstein J. Org. Chem. 2021, 17, 229–233, doi:10.3762/bjoc.17.23

• subsequent decarboxylative trifluoromethylthiolation were performed in a one-pot fashion. Keywords: decarboxylation; fluorinated compounds; pyridine compounds; trifluoromethylthiolation; Introduction The pyridine ring is found in numerous biologically active compounds. Therefore, efficient methods for

• lithium pyridylacetates undergo decarboxylative fluorination upon treatment with an electrophilic fluorination reagent to afford fluoromethylpyridines under catalyst-free conditions. Furthermore, we demonstrated the one-pot synthesis of fluoromethylpyridines from methyl pyridylacetates by saponification

• , entry 11). In the absence of MS 4 Å, the yield of 2a was diminished even when the reaction was carried out in THF (Table 1, entry 12). With the optimized reaction conditions in hand, we examined the one-pot synthesis of 2a from methyl ester 7a. Methyl 2-pyridylacetate 7a were saponified with lithium

Novel library synthesis of 3,4-disubstituted pyridin-2(1H)-ones via cleavage of pyridine-2-oxy-7-azabenzotriazole ethers under ionic hydrogenation conditions at room temperature

• Romain Pierre,
• Anne Brethon,
• Sylvain A. Jacques,
• Aurélie Blond,
• Sandrine Chambon,
• Sandrine Talano,
• Catherine Raffin,
• Branislav Musicki,
• Claire Bouix-Peter,
• Loic Tomas,
• Gilles Ouvry,
• Rémy Morgentin,
• Laurent F. Hennequin and
• Craig S. Harris

Beilstein J. Org. Chem. 2021, 17, 156–165, doi:10.3762/bjoc.17.16

• -aminopyridine or any logical end product arising from the OAt ether degradation (Scheme 4) [16]. With these novel conditions in hand, we started the library production based on a 3-step, one-pot process: 1) amide coupling using HATU followed by removal of the solvent by sparging with nitrogen; 2) Boc

• as described in Scheme 5 for this exploration, we decided to focus on developing a more convergent library process than Genentech’s 3-step sequence from 2 (Scheme 1), aiming at introducing the amine moiety at C-4 at the end of the process. We envisaged a rapid, 2-step one-pot library process (amide

Direct synthesis of anomeric tetrazolyl iminosugars from sugar-derived lactams

• Michał M. Więcław and
• Bartłomiej Furman

Beilstein J. Org. Chem. 2021, 17, 115–123, doi:10.3762/bjoc.17.12

• one-pot Mannich/Michael sequence leading to oligocyclic compounds [24], and employment in subsequent Joulié–Ugi multicomponent reactions [25]. This work is an extension of these efforts and seeks to investigate the possibility of incorporating the Ugi–azide multicomponent reaction in this workflow. A

• standard Ugi–azide reaction conditions [35][36][37][38][39] in a one-pot, tandem process. Subjecting glucose-derived lactam 1 to such a procedure gave the desired product in good yield, but with virtually no diastereoselectivity, as shown in Scheme 2. Optimization and scope An initial optimization study

Recent progress in the synthesis of homotropane alkaloids adaline, euphococcinine and N-methyleuphococcinine

• Dimas J. P. Lima,
• Antonio E. G. Santana,
• Michael A. Birkett and
• Ricardo S. Porto

Beilstein J. Org. Chem. 2021, 17, 28–41, doi:10.3762/bjoc.17.4

• LiH2NBH3 in THF at 40 °C to provide amino alcohol (−)-44 in 88% yield. This amino alcohol underwent cyclization through a one-pot process in the presence of TPAP-NMO, which involved oxidation in generated aldehyde 45, followed by dehydrocondensation leading to N,O-tricyclic acetal (−)-46 in 80% yield

Silver-catalyzed synthesis of β-fluorovinylphosphonates by phosphonofluorination of aromatic alkynes

• Yajing Zhang,
• Qingshan Tian,
• Guozhu Zhang and
• Dayong Zhang

Beilstein J. Org. Chem. 2020, 16, 3086–3092, doi:10.3762/bjoc.16.258

• 200032, P. R. China 10.3762/bjoc.16.258 Abstract A silver-catalyzed three-component reaction involving alkynes, Selectfluor®, and diethyl phosphite was employed for the one-pot formation of C(sp2)–F and C(sp2)–P bonds to provide an efficient access to β-fluorovinylphosphonates in a highly regio- and

Pentannulation of N-heterocycles by a tandem gold-catalyzed [3,3]-rearrangement/Nazarov reaction of propargyl ester derivatives: a computational study on the crucial role of the nitrogen atom

• Giovanna Zanella,
• Martina Petrović,
• Dina Scarpi,
• Ernesto G. Occhiato and
• Enrique Gómez-Bengoa

Beilstein J. Org. Chem. 2020, 16, 3059–3068, doi:10.3762/bjoc.16.255

• reactions, which allow for structural modifications on the organic compounds by forming several chemical bonds in one pot. To this end, gold catalysis [1][2][3][4][5][6][7] has been widely exploited to construct various cyclic and heterocyclic frameworks through cascade reactions triggered by the activation

All-carbon [3 + 2] cycloaddition in natural product synthesis

• Zhuo Wang and
• Junyang Liu

Beilstein J. Org. Chem. 2020, 16, 3015–3031, doi:10.3762/bjoc.16.251

• the desired 169 carrying two vicinal quaternary carbons. A one-pot desilylation of the newly formed 169 with a trifluoride–acetic acid complex produced the tetraquinane 170a in 89% yield with a 4:1 dr. The conversion of the freshly prepared ketone 170a to 170b was achieved in three steps. Ozonolysis