On the photoluminescence in triarylmethyl-centered mono-, di-, and multiradicals

• Daniel Straub,
• Markus Gross,
• Mona E. Arnold,
• Julia Zolg and
• Alexander J. C. Kuehne

Beilstein J. Org. Chem. 2025, 21, 964–998, doi:10.3762/bjoc.21.80

• intensity borrowing from higher excited states, due to orbital overlap, does not explain the improved performance sufficiently, especially when comparing the oscillator strengths that can be determined using density functional theory (DFT) studies [19][20][21]. Moreover, when looking at di- or multiradicals

Study of tribenzo[b,d,f]azepine as donor in D–A photocatalysts

• Katy Medrano-Uribe,
• Jorge Humbrías-Martín and
• Luca Dell’Amico

Beilstein J. Org. Chem. 2025, 21, 935–944, doi:10.3762/bjoc.21.76

• experimentally in the solvatochromism study of fluorescence using solvents with diverse polarities (see Supporting Information File 1, Figure S9). Indeed, the density functional theory (DFT) calculation performed at WB97XD/Def2TZVP level of theory showed the lowest value for the HOMO–LUMO energy gap in compound

Substituent effects in N-acetylated phenylazopyrazole photoswitches

• Radek Tovtik,
• Dennis Marzin,
• Pia Weigel,
• Stefano Crespi and
• Nadja A. Simeth

Beilstein J. Org. Chem. 2025, 21, 830–838, doi:10.3762/bjoc.21.66

• often show higher quantum yields and increased thermal half-life of the metastable state. For the half-life, the choice of the heterocycle is crucial, as revealed through density functional theory (DFT) calculations, which showed that a 5-membered ring promotes the stability of the Z isomer [30]. Within

4-(1-Methylamino)ethylidene-1,5-disubstituted pyrrolidine-2,3-diones: synthesis, anti-inflammatory effect and in silico approaches

• Nguyen Tran Nguyen,
• Vo Viet Dai,
• Luc Van Meervelt,
• Do Thi Thao and
• Nguyen Minh Thong

Beilstein J. Org. Chem. 2025, 21, 817–829, doi:10.3762/bjoc.21.65

• , while density functional theory (DFT) calculations provided insights into their electronic properties, including reactivity and stability. This comprehensive approach, integrating synthesis, biological evaluation, and computational methods, highlights the potential of 4-(1-methylamino)ethylidene-1,5

• compounds and the reference drug dexamethasone (DEX) against the iNOS enzyme. The interactions between the ligands and the target enzyme were further visualized and analyzed using Discovery Studio software [47]. Density functional theory (DFT) method: The molecular structures of the tested compounds were

Recent advances in allylation of chiral secondary alkylcopper species

• Minjae Kim,
• Gwanggyun Kim,
• Doyoon Kim,
• Jun Hee Lee and
• Seung Hwan Cho

Beilstein J. Org. Chem. 2025, 21, 639–658, doi:10.3762/bjoc.21.51

• , computational density functional theory calculations were performed focusing on the oxidative addition transition states (S,R)-TS8 and (S,S)-TS9 (Scheme 19b). The theoretical analysis revealed a notable energy difference between these diastereomeric transition states, with (S,R)-TS8 being 4.11 kcal/mol lower in

Unraveling aromaticity: the dual worlds of pyrazole, pyrazoline, and 3D carborane

• Zahra Noori,
• Miquel Solà,
• Clara Viñas,
• Francesc Teixidor and
• Jordi Poater

Beilstein J. Org. Chem. 2025, 21, 412–420, doi:10.3762/bjoc.21.29

• of aromaticity. Therefore, relying solely on NICS can be misleading, and other computational indicators, along with experimental or structural data, should be used to accurately assess aromaticity. Keywords: 3D aromaticity; carborane; density functional theory; NICS ambiguity; pyrazole

The effect of neighbouring group participation and possible long range remote group participation in O-glycosylation

• Rituparna Das and
• Balaram Mukhopadhyay

Beilstein J. Org. Chem. 2025, 21, 369–406, doi:10.3762/bjoc.21.27

Antibiofilm and cytotoxic metabolites from the entomopathogenic fungus Samsoniella aurantia

• Rita Toshe,
• Syeda J. Khalid,
• Blondelle Matio Kemkuignou,
• Esteban Charria-Girón,
• Paul Eckhardt,
• Birthe Sandargo,
• Kunlapat Nuchthien,
• J. Jennifer Luangsa-ard,
• Till Opatz,
• Hedda Schrey,
• Sherif S. Ebada and
• Marc Stadler

Beilstein J. Org. Chem. 2025, 21, 327–339, doi:10.3762/bjoc.21.23

• simulated using Spartan’10 [26] on the PM6 level of theory [27]. Density-functional theory (DFT) calculations were computed utilizing the Gaussian program package, revision C.01 [28]. The geometry of the conformers was optimized on the B3LYP/6-311+G(2d,p) [29][30][31][32] level of theory with tight cutoffs

Synthesis and characterizations of highly luminescent 5-isopropoxybenzo[rst]pentaphene

• Islam S. Marae,
• Jingyun Tan,
• Rengo Yoshioka,
• Zakaria Ziadi,
• Eugene Khaskin,
• Serhii Vasylevskyi,
• Ryota Kabe,
• Xiushang Xu and
• Akimitsu Narita

Beilstein J. Org. Chem. 2025, 21, 270–276, doi:10.3762/bjoc.21.19

• optimized by density functional theory (DFT) calculations (Figure S2 in Supporting Information File 1). The optoelectronic properties of BPP-OiPr 3 and BPP-dione 4 were initially investigated by UV–vis absorption spectroscopy in comparison with BPP 2 (Figure 2a). BPP 2 and BPP-OiPr 3 displayed similar and

Effect of substitution position of aryl groups on the thermal back reactivity of aza-diarylethene photoswitches and prediction by density functional theory

• Misato Suganuma,
• Daichi Kitagawa,
• Shota Hamatani and
• Seiya Kobatake

Beilstein J. Org. Chem. 2025, 21, 242–252, doi:10.3762/bjoc.21.16

• analysis of the thermal back reaction revealed activation parameters, highlighting how the substitution position of the aryl group affects the thermal stability. Additionally, density functional theory calculations identified M06 and MPW1PW91 as the most accurate functionals for predicting the thermal back

• effective methods for predicting the thermal back reactivity, density functional theory (DFT) calculations can be considered [51][58][59][60][61][62]. For example, in previous studies on the thermal back reactivity of diarylbenzene that is an analogue of diarylethene, we found that the M06-2X level of

Dioxazolones as electrophilic amide sources in copper-catalyzed and -mediated transformations

• Seungmin Lee,
• Minsuk Kim,
• Hyewon Han and
• Jongwoo Son

Beilstein J. Org. Chem. 2025, 21, 200–216, doi:10.3762/bjoc.21.12

• terminal alkynes did not result in the desired N-acyl amidine 10l. Based on the substrate scope of acetylenes, the authors noted that the lower acidity of terminal acetylenes led to a diminished formation of the copper acetylide intermediate. Based on several mechanistic experiments and density functional

• theory (DFT) calculations, a proposed reaction mechanism is suggested as shown in Figure 3. Initially, copper acetylide INT-11 is formed by the reaction of acetylene with a copper precatalyst, leading to the formation of an N-acyl nitrene acetylide intermediate INT-12 after the incorporation of

Synthesis, structure and π-expansion of tris(4,5-dehydro-2,3:6,7-dibenzotropone)

• Yongming Xiong,
• Xue Lin Ma,
• Shilong Su and
• Qian Miao

Beilstein J. Org. Chem. 2025, 21, 1–7, doi:10.3762/bjoc.21.1

• for conformational change is provided by the earlier report that the NMR spectrum of 1 at −80 °C did not display significant broadening [1]. To better understand the two conformers of 1 found in the crystals, density functional theory (DFT) calculations were carried out using the molecular geometries

Controlled oligomerization of [1.1.1]propellane through radical polarity matching: selective synthesis of SF₅- and CF₃SF₄-containing [2]staffanes

• Jón Atiba Buldt,
• Wang-Yeuk Kong,
• Yannick Kraemer,
• Masiel M. Belsuzarri,
• Ansh Hiten Patel,
• James C. Fettinger,
• Dean J. Tantillo and
• Cody Ross Pitts

Beilstein J. Org. Chem. 2024, 20, 3134–3143, doi:10.3762/bjoc.20.259

• chloropentafluorosulfanylated [2]staffane (SF5-BCP-BCP-Cl, 2), based on alternating radical polarity matching in the chain-propagation steps (Figure 1, bottom) [45][46][47]. Density functional theory (DFT) calculations provide insight into our observed selectivity, and our hypothesis is bolstered by computation of relative

• established that [1.1.1]propellane participates in radical-chain reactions (i.e., oligomerization) at room temperature in solution to form unsubstituted [n]staffanes. The origin of this innately controlled oligomerization was then investigated through density functional theory (DFT) calculations. The free

• dramatic change in bicyclopentyl radical philicity would arise after incorporation of the second BCP unit. In addition to charge models, we evaluated global reactivity indices (ω: electrophilicity index [70] and N: nucleophilicity index [71]) within the conceptual density functional theory (CDFT) framework

Hypervalent iodine-mediated intramolecular alkene halocyclisation

• Charu Bansal,
• Oliver Ruggles,
• Albert C. Rowett and
• Alastair J. J. Lennox

Beilstein J. Org. Chem. 2024, 20, 3113–3133, doi:10.3762/bjoc.20.258

• is then attacked by a nucleophile. The use of chiral iodine catalysts is essential for controlling the stereochemistry of the reaction. The specific arrangement of the catalyst influences the orientation of this nucleophilic attack as supported by density functional theory (DFT) calculations. In 2022

Enantioselective regiospecific addition of propargyltrichlorosilane to aldehydes catalyzed by biisoquinoline N,N’-dioxide

• Noble Brako,
• Sreerag Moorkkannur Narayanan,
• Amber Burns,
• Layla Auter,
• Valentino Cesiliano,
• Rajeev Prabhakar and
• Norito Takenaka

Beilstein J. Org. Chem. 2024, 20, 3069–3076, doi:10.3762/bjoc.20.255

• in the absence and presence of N,N-diisopropylethylamine using density functional theory (DFT) calculations (Figure 1). According to the DFT calculations, the free propargyltrichlorosilane (Iprop) can isomerize to allenyltrichlorosilane (Iall) with a prohibitively high barrier of 43.8 kcal/mol

The charge transport properties of dicyanomethylene-functionalised violanthrone derivatives

• Sondos A. J. Almahmoud,
• Joseph Cameron,
• Dylan Wilkinson,
• Michele Cariello,
• Claire Wilson,
• Alan A. Wiles,
• Peter J. Skabara and
• Graeme Cooke

Beilstein J. Org. Chem. 2024, 20, 2921–2930, doi:10.3762/bjoc.20.244

• the Knoevenagel condensation with malononitrile was successfully reported [33]. Theoretical studies Density functional theory (DFT) calculations of two derivatives of compounds 2 and 3, having methoxy groups instead of the longer alkyl chains have been reported in the literature [32], providing

• hindered charge transport. Experimental Computational Density functional theory (DFT) calculations were performed using Gaussian 09 software. Molecular geometries were initially optimised semi-empirically (AM1) and then reoptimised by DFT using the B3LYP method with the 6-311G(d,p) basis set unless stated

Deciphering the mechanism of γ-cyclodextrin’s hydrophobic cavity hydration: an integrated experimental and theoretical study

• Stiliyana Pereva,
• Stefan Dobrev,
• Tsveta Sarafska,
• Valya Nikolova,
• Silvia Angelova,
• Tony Spassov and
• Todor Dudev

Beilstein J. Org. Chem. 2024, 20, 2635–2643, doi:10.3762/bjoc.20.221

• properties of γ-CD (the largest of the three most abundant native CDs), the main experimental methods applied in this study were differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). By coupling these techniques with density functional theory (DFT) calculations we try to shed some

• studies to elucidate the mechanism of the γ-CD hydration. Herewith, by employing a combination of experimental (differential scanning calorimetry/thermogravimetry) and theoretical approaches (density functional theory calculations) we endeavor to shed additional light on the mechanism of the γ-CD

Anion-dependent ion-pairing assemblies of triazatriangulenium cation that interferes with stacking structures

• Yohei Haketa,
• Takuma Matsuda and
• Hiromitsu Maeda

Beilstein J. Org. Chem. 2024, 20, 2567–2576, doi:10.3762/bjoc.20.215

• 524 nm was mainly derived from HOMO−1/HOMO-to-LUMO transition (HOMO: highest occupied molecular orbital, LUMO: lowest unoccupied molecular orbital), as revealed by the time-dependent density functional theory (TDDFT) calculation of the optimized structure of 2+ at the B3LYP/6-31+G(d,p) level of theory

Machine learning-guided strategies for reaction conditions design and optimization

• Lung-Yi Chen and
• Yi-Pei Li

Beilstein J. Org. Chem. 2024, 20, 2476–2492, doi:10.3762/bjoc.20.212

• of molecules using density functional theory (DFT) calculations, which are computationally expensive and time-consuming [62]. To overcome this challenge, some studies have proposed to pre-generate QM properties datasets and train ML models to serve as fast feature generators for new molecules [16

Synthesis and conformational analysis of pyran inter-halide analogues of ᴅ-talose

• Olivier Lessard,
• Mathilde Grosset-Magagne,
• Paul A. Johnson and
• Denis Giguère

Beilstein J. Org. Chem. 2024, 20, 2442–2454, doi:10.3762/bjoc.20.208

• and nonbonding interactions for the halogen at C4. Finally, density functional theory (DFT) calculations corroborate the preference of talose analogues to adopt a 4C1-like conformation and a natural bonding orbital (NBO) analysis demonstrates the effects of hyperconjugation from C–F antibonding

• -halides motivated us to use density functional theory (DFT) calculations to understand the preference of talose analogues to adopt 4C1-like conformations. DFT computations were performed using Gaussian 16 revision B.01 [67] with the CAM-B3LYP [68][69][70] functional and the Def2TZVP basis set [71], which

Radical reactivity of antiaromatic Ni(II) norcorroles with azo radical initiators

• Siham Asyiqin Shafie,
• Ryo Nozawa,
• Hideaki Takano and
• Hiroshi Shinokubo

Beilstein J. Org. Chem. 2024, 20, 1967–1972, doi:10.3762/bjoc.20.172

• ) norcorrole. The radical reactivity of Ni(II) norcorroles was investigated by density functional theory (DFT) calculations. Keywords: 16π; antiaromatic; norcorrole; porphyrinoid; radical; Introduction Considerable attention has been directed toward antiaromatic norcorroles [1][2][3] due to the fascinating

Regioselective alkylation of a versatile indazole: Electrophile scope and mechanistic insights from density functional theory calculations

• Pengcheng Lu,
• Luis Juarez,
• Paul A. Wiget,
• Weihe Zhang,
• Krishnan Raman and
• Pravin L. Kotian

Beilstein J. Org. Chem. 2024, 20, 1940–1954, doi:10.3762/bjoc.20.170

• -carboxylate (6) and the use of density functional theory (DFT) to evaluate their mechanisms. Over thirty N1- and N2-alkylated products were isolated in over 90% yield regardless of the conditions. DFT calculations suggest a chelation mechanism produces the N1-substituted products when cesium is present and

The Groebke–Blackburn–Bienaymé reaction in its maturity: innovation and improvements since its 21st birthday (2019–2023)

• Cristina Martini,
• Muhammad Idham Darussalam Mardjan and
• Andrea Basso

Beilstein J. Org. Chem. 2024, 20, 1839–1879, doi:10.3762/bjoc.20.162

• diaryliodonium triflates such as 8 and 9 [13]. They studied a model reaction with 2-aminopyridine (1), p-tolualdehyde (10) and cyclohexyl isocyanide (11) both experimentally (by binding and kinetic studies) and theoretically (by density functional theory (DFT) calculations) (Scheme 5). Catalyst 8 was found to be

Divergent role of PIDA and PIFA in the AlX₃ (X = Cl, Br) halogenation of 2-naphthol: a mechanistic study

• Kevin A. Juárez-Ornelas,
• Manuel Solís-Hernández,
• Pedro Navarro-Santos,
• J. Oscar C. Jiménez-Halla and
• César R. Solorio-Alvarado

Beilstein J. Org. Chem. 2024, 20, 1580–1589, doi:10.3762/bjoc.20.141

• reported by our group, was elucidated via quantum chemical calculations using density functional theory. The chlorination mechanism using PIFA and AlCl3 demonstrated a better experimental and theoretical yield compared to using PIDA. Additionally, the lowest-energy chlorinating species was characterized by

• halogenation via PhIX2. Keywords: aromatic bromination; aromatic chlorination; density functional theory (DFT); hypervalent iodine; iodine(III); Introduction Hypervalent iodine(III) reagents have gained attention as strong oxidants with a low toxicity [1][2][3][4][5][6][7][8] and due to the ability to mimic

• , and transition-state structures were optimized by density functional theory (DFT) calculations employing the software Gaussian 16 [34]. Although the B3LYP functional could be suitable for these calculations, e.g., for tracing reaction pathways, nitrations, halogenations, or FC acylations in solution

Regio- and stereochemical stability induced by anomeric and gauche effects in difluorinated pyrrolidines

• Ana Flávia Candida Silva,
• Francisco A. Martins and
• Matheus P. Freitas

Beilstein J. Org. Chem. 2024, 20, 1572–1579, doi:10.3762/bjoc.20.140

• the impact of gauche and anomeric effects on the conformer stabilities of different stereo- and regioisomers. Initially, we conducted a benchmark assessment comparing the optimal density functional theory method with coupled cluster with single and double excitations (CCSD) calculations and

• each be subjected to quantum-chemical analysis. Results and Discussion In order to achieve the most accurate conformational depiction of the difluorinated pyrrolidines through density functional theory (DFT), a benchmark study was conducted. This study compares the crystallographic geometry of a