Sequential two-step, one-pot microwave-assisted Urech synthesis of 5-monosubstituted hydantoins from L-amino acids in water

• Wei-Jin Chang,
• Sook Yee Liew,
• Thomas Kurz and
• Siow-Ping Tan

Beilstein J. Org. Chem. 2025, 21, 596–600, doi:10.3762/bjoc.21.46

• demonstrate that the process can be effectively scaled up, particularly in industries that prioritize sustainability and operational efficiency. In terms of green chemistry principles, this approach already meets several key goals, such as reducing the use of hazardous reagents and solvents, increasing

Cu(OTf)₂-catalyzed multicomponent reactions

• Sara Colombo,
• Camilla Loro,
• Egle M. Beccalli,
• Gianluigi Broggini and
• Marta Papis

Beilstein J. Org. Chem. 2025, 21, 122–145, doi:10.3762/bjoc.21.7

• , secondary aliphatic or aromatic amines and thiols in the presence of catalytic Cu(OTf)2 (1 mol %) in aqueous media was proven to be a sustainable procedure to access thioaminals 5, avoiding high temperatures and/or hazardous reagents required by classical conditions (Scheme 4) [18]. The 1,2

A review of recent advances in electrochemical and photoelectrochemical late-stage functionalization classified by anodic oxidation, cathodic reduction, and paired electrolysis

• Nian Li,
• Ruzal Sitdikov,
• Ajit Prabhakar Kale,
• Joost Steverlynck,
• Bo Li and
• Magnus Rueping

Beilstein J. Org. Chem. 2024, 20, 2500–2566, doi:10.3762/bjoc.20.214

gem-Difluorination of carbon–carbon triple bonds using Brønsted acid/Bu₄NBF₄ or electrogenerated acid

• Mizuki Yamaguchi,
• Hiroki Shimao,
• Kengo Hamasaki,
• Keiji Nishiwaki,
• Shigenori Kashimura and
• Kouichi Matsumoto

Beilstein J. Org. Chem. 2024, 20, 2261–2269, doi:10.3762/bjoc.20.194

• gem-difluorination of alkynes (Figure 1, reaction 4) [38]. In 2020, the utility of 2,6-dichloropyridinium tetrafluoroborate was nicely demonstrated for the gem-difluorination by Liu and Wang (Figure 1, reaction 5) [39]. Although some procedures have been reported, the use of hazardous reagents such as

Green and sustainable approaches for the Friedel–Crafts reaction between aldehydes and indoles

• Periklis X. Kolagkis,
• Eirini M. Galathri and
• Christoforos G. Kokotos

Beilstein J. Org. Chem. 2024, 20, 379–426, doi:10.3762/bjoc.20.36

• synthetic pathways in organic chemistry [32][33][34]. Common organic syntheses require the use of harmful chemicals, such as toxic solvents, hazardous reagents, catalysts and reaction conditions, which contribute to environmental pollution and soil degradation [35][36]. Wanting to enhance the sustainability

Mechanisms for radical reactions initiating from N-hydroxyphthalimide esters

• Carlos R. Azpilcueta-Nicolas and
• Jean-Philip Lumb

Beilstein J. Org. Chem. 2024, 20, 346–378, doi:10.3762/bjoc.20.35

• chemistry is well documented [1][2]. Traditional approaches for radical generation relied on hazardous reagents and harsh conditions, resulting in low reaction efficiency and undesired byproduct formation [3][4][5][6]. As a consequence, the utility of radicals in organic synthesis remained limited for many

Mechanochemical solid state synthesis of copper(I)/NHC complexes with K₃PO₄

• Ina Remy-Speckmann,
• Birte M. Zimmermann,
• Mahadeb Gorai,
• Martin Lerch and
• Johannes F. Teichert

Beilstein J. Org. Chem. 2023, 19, 440–447, doi:10.3762/bjoc.19.34

• chemistry heralded for synthetic chemistry are minimization or ideally the complete prevention of chemical waste. In this vein, the use of innocuous chemicals, replacement of hazardous reagents, atom efficient reactions and overall safer chemical processes are desirable [1][2]. Therefore, one current

Cathodic generation of reactive (phenylthio)difluoromethyl species and its reactions: mechanistic aspects and synthetic applications

• Sadanobu Iwase,
• Shinsuke Inagi and
• Toshio Fuchigami

Beilstein J. Org. Chem. 2022, 18, 872–880, doi:10.3762/bjoc.18.88

• , these methods require various metal and organometallic reagents. On the other hand, electrochemical organic synthesis is a metal-free process and does not require any hazardous reagents and it produces less waste than conventional chemical syntheses. Therefore, electrochemical synthesis is desirable

Asymmetric organocatalyzed synthesis of coumarin derivatives

• Natália M. Moreira,
• Lorena S. R. Martelli and
• Arlene G. Corrêa

Beilstein J. Org. Chem. 2021, 17, 1952–1980, doi:10.3762/bjoc.17.128

• synthetic perspective, coumarin derivatives have received much attention due to their pivotal role in organic synthesis [16][17][18]. The development of efficient synthetic processes with eco-friendliness and sustainability that avoid the extensive use of toxic and hazardous reagents and solvents, as well

A comprehensive review of flow chemistry techniques tailored to the flavours and fragrances industries

• Guido Gambacorta,
• James S. Sharley and
• Ian R. Baxendale

Beilstein J. Org. Chem. 2021, 17, 1181–1312, doi:10.3762/bjoc.17.90

Extrusion – back to the future: Using an established technique to reform automated chemical synthesis

• Deborah E. Crawford

Beilstein J. Org. Chem. 2017, 13, 65–75, doi:10.3762/bjoc.13.9

• pyrophoric reagent, such as s-BuLi, is involved is quite remarkable, and it is carried out as a continuous process and not on a small scale. This suggests that solvent-free extrusion can be on par with continuous flow technology, allowing a wider range of hazardous reagents to be used continuously and on

Development of a continuous process for α-thio-β-chloroacrylamide synthesis with enhanced control of a cascade transformation

• Olga C. Dennehy,
• Valérie M. Y. Cacheux,
• Benjamin J. Deadman,
• Denis Lynch,
• Stuart G. Collins,
• Humphrey A. Moynihan and
• Anita R. Maguire

Beilstein J. Org. Chem. 2016, 12, 2511–2522, doi:10.3762/bjoc.12.246

• hazardous reagents and intermediates in small quantities, in situ, and transferred directly into a reaction stage without operator handling [21][22][23][24][25][26]. As rapid heat transfer (steps 1 and 3) and greater reaction control (steps 2 and 3) were identified as the key challenges to be overcome, we

Recent advances in the electrochemical construction of heterocycles

• Robert Francke

Beilstein J. Org. Chem. 2014, 10, 2858–2873, doi:10.3762/bjoc.10.303

• the use of an expensive catalyst and/or toxic and hazardous reagents. In order to meet increasing environmental and economic constraints, further efforts should be directed towards the development of mild and reagent-free methods [17][18]. In this context, electroorganic synthesis can provide an

Silica sulfuric acid: a reusable solid catalyst for one pot synthesis of densely substituted pyrrole-fused isocoumarins under solvent-free conditions

• Sudipta Pathak,
• Kamalesh Debnath and
• Animesh Pramanik

Beilstein J. Org. Chem. 2013, 9, 2344–2353, doi:10.3762/bjoc.9.269

• ]. Although these methods are useful for the synthesis of isocoumarin derivatives, the reactions involved in the synthesis still suffer from some serious limitations such as the use of expensive and hazardous reagents [12] and toxic metal catalysts [10][11][15][17]. Some of the reactions need laborious and

Bis(benzylamine) monomers: One-pot preparation and application in dendrimer scaffolds for removing pyrene from aqueous environments

• Olivia N. Monaco,
• Sarah C. Tomas,
• Meghan K. Kirrane and
• Amy M. Balija

Beilstein J. Org. Chem. 2013, 9, 2320–2327, doi:10.3762/bjoc.9.266

• . Therefore, the bisimine and bisamine synthesis disclosed in this paper are ideal for the generation of functionalized systems with a higher molecular weight without the use of hazardous reagents or generating large quantities of waste as compared with previously published systems. Bisimine 3a was stable to

Controlling hazardous chemicals in microreactors: Synthesis with iodine azide

• Johan C. Brandt and
• Thomas Wirth

Beilstein J. Org. Chem. 2009, 5, No. 30, doi:10.3762/bjoc.5.30

• reaction conditions in microreactors. Keywords: azide; flow chemistry; hazardous reagents; microreactor; rearrangement; Introduction Microstructured devices have already found their way into organic synthesis, because they offer various advantages over traditional large-scale chemistry performed in

The development and evaluation of a continuous flow process for the lipase- mediated oxidation of alkenes

• Charlotte Wiles,
• Marcus J. Hammond and
• Paul Watts

Beilstein J. Org. Chem. 2009, 5, No. 27, doi:10.3762/bjoc.5.27

• two cycles (60%) affording complete deactivation of the enzyme on the third cycle; yields in the range of 73 to 85% were however obtained upon adding the oxidant in aliquots over a period of 24 h. Although the chemo-enzymatic epoxidation of alkenes is an attractive alternative to the hazardous

• reagents currently employed, finding use in the synthesis of the aroma linalool oxide and epoxidised soybean oil [16], the reaction times employed for the transformations (< 166 h) and observed reductions in enzyme activity in the presence of H2O2 (2) do not currently make the technique a practical