Evaluating the halogen bonding strength of a iodoloisoxazolium(III) salt

• Dominik L. Reinhard,
• Anna Schmidt,
• Marc Sons,
• Julian Wolf,
• Elric Engelage and
• Stefan M. Huber

Beilstein J. Org. Chem. 2024, 20, 2401–2407, doi:10.3762/bjoc.20.204

• it with our known iodonium species in the activation of Au(I)–Cl bonds. Results and Discussion As immediate precursor to the target structure 7Z, the literature-known isoxazole 10 was synthesized via a Cu(I)-catalyzed cycloaddition between (2-iodophenyl)acetylene (8) and benzyl nitrile oxide, which

Lewis acid-promoted direct synthesis of isoxazole derivatives

• Dengxu Qiu,
• Chenhui Jiang,
• Pan Gao and
• Yu Yuan

Beilstein J. Org. Chem. 2023, 19, 1562–1567, doi:10.3762/bjoc.19.113

• reported [16]. In 2015, Yang’s group [10][17] reported the copper-catalyzed conversion of methylarenes into isoxazole derivatives with KNO3 as the source of nitrile oxide (Scheme 1, reaction 1). In 2019, Deng’s group [18] developed a three-component synthesis method of isoxazole derivatives using TBN as

• holds significant potential due to their cost-effectiveness as compared to heavy metals. This renders them highly valuable for various applications in the field. Herein, we successfully developed a method that uses sodium nitrite as the source of nitrile oxide, and only applies aluminium trichloride as

• complexed with the starting material 2a to generate intermediate B and HONO [22]. Then, the intermediate B conjugates with HONO to generate intermediate C [22]. Next, the intermediate D is produced by the same progress. The intermediate D then undergoes elimination of nitroxylic acid to produce nitrile

Synthesis of 3,4,5-trisubstituted isoxazoles in water via a [3 + 2]-cycloaddition of nitrile oxides and 1,3-diketones, β-ketoesters, or β-ketoamides

• Md Imran Hossain,
• Md Imdadul H. Khan,
• Seong Jong Kim and
• Hoang V. Le

Beilstein J. Org. Chem. 2022, 18, 446–458, doi:10.3762/bjoc.18.47

• carbanion I that is solvated by the polar solvent. The carbanion I then adds to the carbon (carbocation) of the nitrile oxide, to give the intermediate II. Due to steric effects, the intermediate II undergoes bond rotation to the lowest-energy conformation II-D in which the methyl group is at a close

• distance to the nitrile oxide. Then, cyclization followed by the elimination of water (formation of the aromatic ring is the driving force), produces the 3,4,5-trisubstituted isoxazole 3a (Figure 8). Of note, II-A–II-D are conformers, not resonance structures, and the isoxazole 3a is likely the

• only is environmentally friendly, but also finds significant applications in biological systems (e.g., click reactions, bio-conjugation, and bio-orthogonal chemistry). One of such applications is ligation chemistry, in which “click” chemistry through a [3 + 2] biorthogonal cycloaddition between nitrile

A study on selective transformation of norbornadiene into fluorinated cyclopentane-fused isoxazolines

• Zsanett Benke,
• Attila M. Remete and
• Loránd Kiss

Beilstein J. Org. Chem. 2021, 17, 2051–2066, doi:10.3762/bjoc.17.132

• Abstract This work presents an examination of the selective functionalization of norbornadiene through nitrile oxide 1,3-dipolar cycloaddition/ring-opening metathesis (ROM)/cross-metathesis (CM) protocols. Functionalization of commercially available norbornadiene provided novel bicyclic scaffolds with

• the CM transformations with the goal of exploring substrate and steric effects, catalyst influence and chemodifferentiation of the olefin bonds furnishing the corresponding functionalized, fluorine-containing isoxazoline derivatives. Keywords: functionalization; metathesis; nitrile oxide

• selective functionalization of readily available norbornadiene across nitrile oxide cycloaddition/ROM/CM protocols in view of the access of various fluorine-containing molecular entities as well as to explore the chemical behavior of olefin bonds in the reaction with some fluorinated alkene derivatives in

Thermodynamic and electrochemical study of tailor-made crown ethers for redox-switchable (pseudo)rotaxanes

• Henrik Hupatz,
• Marius Gaedke,
• Hendrik V. Schröder,
• Julia Beerhues,
• Arto Valkonen,
• Fabian Klautzsch,
• Sebastian Müller,
• Felix Witte,
• Kari Rissanen,
• Biprajit Sarkar and
• Christoph A. Schalley

Beilstein J. Org. Chem. 2020, 16, 2576–2588, doi:10.3762/bjoc.16.209

• the optoelectronic properties of the NDI unit. The binding properties suggest that the combination of the A1·BArF24 axle and NDIC8 is optimal for the synthesis of an NDI-containing [2]rotaxane. We applied Takata’s catalyst-free stoppering approach [58] using the nitrile oxide St for the preparation of

Oxime radicals: generation, properties and application in organic synthesis

• Igor B. Krylov,
• Stanislav A. Paveliev,
• Alexander S. Budnikov and
• Alexander O. Terent’ev

Beilstein J. Org. Chem. 2020, 16, 1234–1276, doi:10.3762/bjoc.16.107

• corresponding to the free iminoxyl radical, which indicates the reversibility of dimerization [53]. During the oxidation of pivalic aldoxime 1e by Ag2O, the formation of nitrile oxide 6e was observed, which then slowly dimerized to the corresponding furoxan 7e. The kinetics of the decomposition of dialkyl

The use of isoxazoline and isoxazole scaffolding in the design of novel thiourea and amide liquid-crystalline compounds

• Itamar L. Gonçalves,
• Rafaela R. da Rosa,
• Vera L. Eifler-Lima and
• Aloir A. Merlo

Beilstein J. Org. Chem. 2020, 16, 175–184, doi:10.3762/bjoc.16.20

• , 8, 9, 12 and 13 were then prepared by [3 + 2]-1,3-dipolar cycloaddition of nitrile oxide (ArCNO) formed in situ from oximes and a number of alkenes as dipolarophiles, to yield the precursors of the cycloadducts isoxazolines 2, 7 and 11 regioselectively. The cycloadducts were subjected to SnCl2

Introduction of an isoxazoline unit to the β-position of porphyrin via regioselective 1,3-dipolar cycloaddition reaction

• Xiujun Liu,
• Xiang Ma and
• Yaqing Feng

Beilstein J. Org. Chem. 2019, 15, 1434–1440, doi:10.3762/bjoc.15.143

• ; isoxazoline; macrocycles; nitrile oxide; porphyrin; Introduction In nature, porphyrin-type compounds play a prominent role in life [1]. It is well known that certain vital functions, like O2 transport, photosynthesis etc. depend on the action of porphyrin–metal complexes [2][3][4][5]. Inspired by the natural

• -generated nitrile oxide, which showed inferior selectivity and afforded regio-/stereoisomers [43]. NMR analysis assisted the identification of various isomeric isoxazoline-linked chlorin products. Here, we would like to report an artificial vinylporphyrin 2, which has been designed to control the

• group C2/c. Figure 3 shows the dimeric structure of 3a (front view and side view). Notably, only the 5-position of isoxazoline linking to porphyrin was observed. As expected, the steric clash of the substituent on nitrile oxide and porphyrin framework seems to confine the reaction trajectory and direct

Ring-opening metathesis of some strained bicyclic systems; stereocontrolled access to diolefinated saturated heterocycles with multiple stereogenic centers

• Zsanett Benke,
• Melinda Nonn,
• Márton Kardos,
• Santos Fustero and
• Loránd Kiss

Beilstein J. Org. Chem. 2018, 14, 2698–2707, doi:10.3762/bjoc.14.247

• (5 mol %), leading at 20 °C to δ-lactone derivative (±)-15 although with low yield (Scheme 6, Table 4). In continuation, we selected a cyclooctene-fused system, namely isoxazoline (±)-16 which, in turn, was accessed through nitrile–oxide dipolar cycloaddition, by using nitroethane, DMAP and Boc2O

• vacuum and the residue was purified by column chromatography on silica gel (n-hexane/EtOAc). General procedure for the nitrile–oxide cycloaddition To a solution of 1,5-cyclooctadiene (1.5 mmol) in THF (20 mL), EtNO2 (5 equiv), DMAP (0.3 mmol, 20 mol %) and Boc2O (4.5 mmol, 3 equiv) were added and the

Tetrathiafulvalene – a redox-switchable building block to control motion in mechanically interlocked molecules

• Hendrik V. Schröder and
• Christoph A. Schalley

Beilstein J. Org. Chem. 2018, 14, 2163–2185, doi:10.3762/bjoc.14.190

• . Very recently, our group reported on a crown/ammonium rotaxane 17 in which a TTF unit is implemented in the crown-ether wheel (Figure 15) [82]. The rotaxane was synthesized by a catalyst-free nitrile oxide capping strategy in 67% yield. In the neutral state, the wheel is strongly bound to the ammonium

Isoxazole derivatives as new nitric oxide elicitors in plants

• Anca Oancea,
• Emilian Georgescu,
• Florentina Georgescu,
• Alina Nicolescu,
• Elena Iulia Oprita,
• Catalina Tudora,
• Lucian Vladulescu,
• Marius-Constantin Vladulescu,
• Florin Oancea and
• Calin Deleanu

Beilstein J. Org. Chem. 2017, 13, 659–664, doi:10.3762/bjoc.13.65

• -disubstituted isoxazoles on nitric oxide and reactive oxygen species generation in Arabidopsis tissues was studied using specific diaminofluoresceine dyes as fluorescence indicators. Keywords: chemical elicitor; 1,3-dipolar cycloaddition; isoxazole; nitric oxide; nitrile oxide; reactive oxygen species

• the yields of isoxazole products are quite low because of side reactions and both regioisomers are generally obtained [23][24][25]. The one-pot 1,3-dipolar cycloaddition reaction of a nitrile oxide, generated in situ from the corresponding hydroxymoyl chloride, with an in situ brominated electron

Combined experimental and theoretical studies of regio- and stereoselectivity in reactions of β-isoxazolyl- and β-imidazolyl enamines with nitrile oxides

• Ilya V. Efimov,
• Marsel Z. Shafikov,
• Nikolai A. Beliaev,
• Natalia N. Volkova,
• Tetyana V. Beryozkina,
• Wim Dehaen,
• Zhijin Fan,
• Viktoria V. Grishko,
• Gert Lubec,
• Pavel A. Slepukhin and
• Vasiliy A. Bakulev

Beilstein J. Org. Chem. 2016, 12, 2390–2401, doi:10.3762/bjoc.12.233

• -5-substituted isoxazoles that are otherwise difficult to obtain. Keywords: β-azolyl enamine; [3 + 2]-cycloaddition; isoxazole; isoxazoline; nitrile oxide; Introduction The biological activity and technically useful properties of isoxazoles have made them the focus of both medicinal and materials

• of a disfavored 5-endo-trig cyclization for the corresponding intermediate oxime. Path 2 involves the initial transformation of hydroxamoyl chloride to a nitrile oxide, followed by concerted cyclization to triazolines 3a–c. We have found that introduction of electron-withdrawing substituents into the

• oxides with acyclic enamines so far, but only a few works based on a semi-empirical approach and a study of Domingo on reactivity of exocyclic enamines [46][47][48][49][50]. For the theoretical investigation, nitrile oxide 6a and enamine 1a were chosen as the model reactants. The geometries of starting

Development of variously functionalized nitrile oxides

• Haruyasu Asahara,
• Keita Arikiyo and
• Nagatoshi Nishiwaki

Beilstein J. Org. Chem. 2015, 11, 1241–1245, doi:10.3762/bjoc.11.138

• -functionalized isoxazole derivatives. Since the amide was prepared by the cycloaddition reaction of ethynylbenzene and N-methylcarbamoylnitrile oxide, the nitrile oxide served as the equivalent of the nitrile oxides bearing a variety of functional groups such as carboxy, alkoxycarbonyl, carbamoyl, acyl and

• formyl moieties. Keywords: acylnitrile oxide; amide; formylnitrile oxide; functionalized nitrile oxide; Weinreb amide; Introduction Nitrile oxides are valuable synthetic synthons for the construction of heterocyclic compounds by cycloaddition reactions, which lead to the formation of two bonds in a

• oxides. In our previous work, we reported the preparation of nitrile oxide 2 bearing an N-methylcarbamoyl group by treatment of 2-methyl-4-nitroisoxazolin-5(2H)-one (1) only with water at room temperature. Nitrile oxide 2 undergoes cycloaddition reactions with alkenes [4][5], alkynes (Scheme 1) [4][5

A one-pot synthesis of 3-trifluoromethyl-2-isoxazolines from trifluoromethyl aldoxime

• Raoni S. B. Gonçalves,
• Michael Dos Santos,
• Guillaume Bernadat,
• Danièle Bonnet-Delpon and
• Benoit Crousse

Beilstein J. Org. Chem. 2013, 9, 2387–2394, doi:10.3762/bjoc.9.275

• available reagents have been employed under metal-free conditions. A group [27] reported that the hypervalent iodine reagents (diacetoxyiodo)benzene (DIB) and phenyliodine bis(trifluoroacetate) (PIFA) could successfully promote the oxidation of aldoximes to the corresponding nitrile oxide. Those reagents

• ]. Upon energy minimization, a structure with a geometry close to linearity was found for trifluoroacetonitrile oxide (Figure 4), which is consistent with earlier findings [44]. Comparison of the energy gaps between the frontier molecular orbital levels of the nitrile oxide and those of the alkene

• level of the dipolarophile. A simple scatter plot of yield versus the latter variable confirms and illustrates this trend (Figure 6), which can be interpreted the following way: when the gap between the LUMO energy level of the nitrile oxide and the HOMO energy level of the alkene becomes too high

Synthesis and characterization of novel bioactive 1,2,4-oxadiazole natural product analogs bearing the N-phenylmaleimide and N-phenylsuccinimide moieties

• Catalin V. Maftei,
• Elena Fodor,
• Peter G. Jones,
• M. Heiko Franz,
• Gerhard Kelter,
• Heiner Fiebig and
• Ion Neda

Beilstein J. Org. Chem. 2013, 9, 2202–2215, doi:10.3762/bjoc.9.259

• complex as a leaving group, giving rise to the formation of the nitrile oxide. The 1,2,4-oxadiazole moiety is established by the 1,3-dipolar cycloaddition of nitrile oxide to the 4-aminobenzonitrile. However, the Lewis acid might also be involved in the formation of the heterocycle via a Lewis acid

The rapid generation of isothiocyanates in flow

• Marcus Baumann and
• Ian R. Baxendale

Beilstein J. Org. Chem. 2013, 9, 1613–1619, doi:10.3762/bjoc.9.184

• chemical transformation which typically eliminates the requirements for any conventional work-up or purification of the reaction stream. Keywords: chloroxime; dipolar cycloaddition; flow chemistry; flow synthesis; immobilised reagents; isothiocyanate; nitrile oxide; Introduction Flow based chemical

• ], both reagents causing safety concerns due to the formation of toxic, malodorous and/or extremely corrosive byproducts (Scheme 1a). An underutilised alternative sequence is the 1,3-dipolar cycloaddition reaction between a nitrile oxide and a thiourea compound which initially generates an unstable 1,4,2

• -oxathiazoline intermediate that readily rearranges into urea and eliminates the desired isothiocyanate product [37][38] (Scheme 1b). Whilst this approach appears on initial inspection to be very attractive it is somewhat hampered by the requirement to access the reactive nitrile oxide species, which once formed

Aryl nitrile oxide cycloaddition reactions in the presence of pinacol boronic acid ester

• Sarah L. Harding,
• Sebastian M. Marcuccio and
• G. Paul Savage

Beilstein J. Org. Chem. 2012, 8, 606–612, doi:10.3762/bjoc.8.67

• dual functionality consisting of a nitrile oxide and a pinacolyl boronate ester was prepared by mild hypervalent iodine oxidation (diacetoxyiodobenzene) of the corresponding aldoxime, without decomposition of the boronate functionality. The nitrile oxide was trapped in situ with a variety of

• dipolarophiles to yield aryl isoxazolines with the boronate ester function intact and available for subsequent reaction. Keywords: dipolar cycloaddition; heterocycle; nitrile oxide; hypervalent iodine oxidation; pinacol boronic acid esters; Introduction Metal-mediated coupling reactions to form carbon–carbon

• convenient substrate would be the arylboronate nitrile oxide 1, which would undergo 1,3-dipolar cycloaddition to give isoxazolines 2. This latter compound could in turn be coupled with heterocycles or aryl groups to give insecticidal [5] derivatives of type 3 (Scheme 1). The utility of arylboronic acids and

Aldol elaboration of 4,5,6,7-tetrahydroisoxazolo[4,3-c]pyridin-4-ones, masked precursors to acylpyridones

• Raymond C. F. Jones,
• Abdul K. Choudhury,
• James N. Iley,
• Mark E. Light,
• Georgia Loizou and
• Terence A. Pillainayagam

Beilstein J. Org. Chem. 2012, 8, 308–312, doi:10.3762/bjoc.8.33

• genetic techniques, and been shown to involve conversion from an acyltetramic acid by oxidative ring expansion [7][8]. During a programme of synthesis towards metabolites containing the enolised heterocyclic tricarbonyl motif 3 [9][10][11][12][13][14][15][16], we have reported nitrile oxide dipolar

Synthesis of highly functionalized β-aminocyclopentanecarboxylate stereoisomers by reductive ring opening reaction of isoxazolines

• Melinda Nonn,
• Loránd Kiss,
• Reijo Sillanpää and
• Ferenc Fülöp

Beilstein J. Org. Chem. 2012, 8, 100–106, doi:10.3762/bjoc.8.10

• 1 [48][49] (Scheme 1). The syntheses consisted of a dipolar cycloaddition of nitrile oxide (generated with Boc2O, Et3N and DMAP) to the olefinic bond of cis-ethyl 2-aminocyclopent-3-enecarboxylate derived from 1, during which the isoxazoline-fused amino ester regio- and stereoisomers (2 and 4) were

• formed, then separated and isolated. The cycloaddition of nitrile oxide to trans-ethyl 2-aminocyclopent-3-enecarboxylate under similar conditions proceeded selectively with the formation of 6. Epimerization of 2 and 4 afforded trans derivatives 3 and 5 [48][49]. Since isoxazoline-functionalized molecules

Mitomycins syntheses: a recent update

• Jean-Christophe Andrez

Beilstein J. Org. Chem. 2009, 5, No. 33, doi:10.3762/bjoc.5.33

• disconnection 5.1. Kozikowski. Nitrile oxide cycloaddition, INOC The Kozikowski group used an intramolecular nitrile oxide cycloaddition (INOC) to form the eight membered ring of a benzazocine system [101]. The hydroxylamine 120 was treated with sodium hypochlorite to generate in situ a nitrile oxide which