Synthesis of pyrrolo[3,2-d]pyrimidine-2,4(3H)-diones by domino C–N coupling/hydroamination reactions

• Ruben Manuel Figueira de Abreu,
• Robin Tiedemann,
• Peter Ehlers and
• Peter Langer

Beilstein J. Org. Chem. 2025, 21, 1010–1017, doi:10.3762/bjoc.21.82

• pyrrolopyrimidine derivatives. The envisioned methodology combines a Sonogashira–Hagihara reaction and a one-pot process comprising a Buchwald–Hartwig coupling reaction followed by a hydroamination [23][24]. Results and Discussion The bromination of 6-chloro-1,3-dimethyluracil (1) afforded, following a known

Unraveling aromaticity: the dual worlds of pyrazole, pyrazoline, and 3D carborane

• Zahra Noori,
• Miquel Solà,
• Clara Viñas,
• Francesc Teixidor and
• Jordi Poater

Beilstein J. Org. Chem. 2025, 21, 412–420, doi:10.3762/bjoc.21.29

• -1,3-dimethylimidazolinium hexafluorophosphate (ADMP) in the presence of DBU in acetonitrile. This one-pot process enables sequential diazotization and cyclization, leading to the formation of two or three C–N bonds under extremely mild conditions, with excellent tolerance for various functional groups

C–H Trifluoromethylthiolation of aldehyde hydrazones

• Victor Levet,
• Balu Ramesh,
• Congyang Wang and
• Tatiana Besset

Beilstein J. Org. Chem. 2024, 20, 2883–2890, doi:10.3762/bjoc.20.242

• conducted in the presence of 1a in a THF/MeCN mixture (1:1) [75], but no product was detected (Scheme 4D). Based on these experiments and literature data [66], a two-step one-pot process was suggested based on 1) the bromination of the hydrazone 1 followed by 2) the anion metathesis in the presence of

Synthesis of spiroindolenines through a one-pot multistep process mediated by visible light

• Francesco Gambuti,
• Jacopo Pizzorno,
• Chiara Lambruschini,
• Renata Riva and
• Lisa Moni

Beilstein J. Org. Chem. 2024, 20, 2722–2731, doi:10.3762/bjoc.20.230

• α-aminoamidines 2a, while the spiro-compound 3a was the main product. 3a was the result of a four-step one-pot process where an oxidation of N-Ph-THIQ, a 3C Ugi-type reaction, a second oxidation of the Ugi-type product 2a and a final cyclization took place, as we had initially planned. Excited by

Multicomponent syntheses of pyrazoles via (3 + 2)-cyclocondensation and (3 + 2)-cycloaddition key steps

• Ignaz Betcke,
• Alissa C. Götzinger,
• Maryna M. Kornet and
• Thomas J. J. Müller

Beilstein J. Org. Chem. 2024, 20, 2024–2077, doi:10.3762/bjoc.20.178

• were overcome by the addition–cyclocondensation of α,β-unsaturated ketones. Embedding 1,3-dipolar cycloadditions into a one-pot process has additionally been developed for concise syntheses of pyrazoles. The MCR strategy also allows for concatenating classical condensation-based methodology with modern

• approach was also used to synthesize pyrazoles since the intermediary-formed diketone 18 forms the corresponding pyrazoles 17 in a Knorr reaction with 2-hydrazinyl-4-phenylthiazoles 15 in a one-pot process (Scheme 4) [52]. Piperidine was used as a catalyst for the Knoevenagel condensation. Remarkably

• three different regioisomers when employing different isothiocyanates 19. However, easy separation by LC–MS could be achieved, as demonstrated for one-pot process generated pyrazoles 21a–f. The reaction demonstrates high tolerance to steric hindrance and electronic factors, enabling the synthesis of

The Groebke–Blackburn–Bienaymé reaction in its maturity: innovation and improvements since its 21st birthday (2019–2023)

• Cristina Martini,
• Muhammad Idham Darussalam Mardjan and
• Andrea Basso

Beilstein J. Org. Chem. 2024, 20, 1839–1879, doi:10.3762/bjoc.20.162

• aza-Michael addition, leading to the benzoxazepinium triflate salt 89. To broaden the scope of the reaction, 2-aminopyrazine and 2-aminoquinoline were also introduced to the one-pot process, furnishing 6-7-5-6 and 6-7-5-6-6 polycycles, respectively (not shown). Chen et al. [63] developed an

Direct synthesis of acyl fluorides from carboxylic acids using benzothiazolium reagents

• Lilian M. Maas,
• Alex Haswell,
• Rory Hughes and
• Matthew N. Hopkinson

Beilstein J. Org. Chem. 2024, 20, 921–930, doi:10.3762/bjoc.20.82

• unreliable isolation of acyl fluoride intermediates, we next considered whether BT-SCF3-mediated deoxyfluorination of carboxylic acids could be coupled with a subsequent acylation in an overall one-pot process. Selecting amines as nucleophilic coupling partners, a short optimisation study was carried out to

• carboxylic acid can lead to good overall yields of acyl fluorides. Conclusion In conclusion, a practical method for the direct synthesis of acyl fluorides from carboxylic acids using BT-SCF3 as a deoxyfluorinating reagent has been developed. In a one-pot process, direct access to various amides was achieved

Ortho-ester-substituted diaryliodonium salts enabled regioselective arylocyclization of naphthols toward 3,4-benzocoumarins

• Ke Jiang,
• Cheng Pan,
• Limin Wang,
• Hao-Yang Wang and
• Jianwei Han

Beilstein J. Org. Chem. 2024, 20, 841–851, doi:10.3762/bjoc.20.76

• salts is an efficient tool for the construction of two or more chemical bonds in a one-pot process. Ortho-functionalized diaryliodonium salts have showcased distinct reactivity in the exploration of benzocyclization or arylocyclization. With this strategy of ortho-ester-substituted diaryliodonium salts

Catalytic multi-step domino and one-pot reactions

• Svetlana B. Tsogoeva

Beilstein J. Org. Chem. 2024, 20, 254–256, doi:10.3762/bjoc.20.25

• -aminopyrazoles with azlactones under solvent-free conditions, through subsequent elimination of a benzamide molecule in a superbasic medium, is described by the Fisyuk group [13]. A further facile one-pot process toward a new series of copper(II) benzo[f]chromeno[2,3-h]quinoxalinoporphyrin analogues is described

One-pot nucleophilic substitution–double click reactions of biazides leading to functionalized bis(1,2,3-triazole) derivatives

• Hans-Ulrich Reissig and
• Fei Yu

Beilstein J. Org. Chem. 2023, 19, 1399–1407, doi:10.3762/bjoc.19.101

• azide was combined with a subsequent copper-catalyzed (3 + 2) cycloaddition with terminal alkynes. This one-pot process was developed with a simple model alkyne, but then applied to more complex alkynes bearing enantiopure 1,2-oxazinyl substituents. Hence, the precursor compounds 1,2-, 1,3- or 1,4-bis

• aminopyran and aminooxepane derivatives and goal of this study employing alkyne component G and biazides in situ-generated from H. Synthesis of model compound 3 under conventional conditions and as a one-pot process employing benzyl bromide (5), alkyne 2 and sodium azide as precursors for the click reaction

Consecutive four-component synthesis of trisubstituted 3-iodoindoles by an alkynylation–cyclization–iodination–alkylation sequence

• Nadia Ledermann,
• Alae-Eddine Moubsit and
• Thomas J. J. Müller

Beilstein J. Org. Chem. 2023, 19, 1379–1385, doi:10.3762/bjoc.19.99

• compounds 5 in yields between 11–69% after chromatographic workup. The structures of the products were unambiguously confirmed by 1H and 13C NMR spectroscopy, as well as by mass spectrometry. Assuming that four new bonds are being formed in this one-pot process, the range of yield from 11 to 69% (after

Strategies in the synthesis of dibenzo[b,f]heteropines

• David I. H. Maier,
• Barend C. B. Bezuidenhoudt and
• Charlene Marais

Beilstein J. Org. Chem. 2023, 19, 700–718, doi:10.3762/bjoc.19.51

• , whereafter Buchwald–Hartwig amination afford the various diarylazepines. A three-component one-pot process allowed for a second in situ Buchwald–Hartwig amination of the diarylazepine with aryl or benzyl halides to give the respective N-aryl and N-benzylazepine derivatives 83 and 84 (Scheme 16). 3.2 Mizoroki

One-pot double annulations to confer diastereoselective spirooxindolepyrrolothiazoles

• Juan Lu,
• Bin Yao,
• Desheng Zhan,
• Zhuo Sun,
• Yun Ji and
• Xiaofeng Zhang

Beilstein J. Org. Chem. 2022, 18, 1607–1616, doi:10.3762/bjoc.18.171

• 81% of LC yield for compound 5a slightly better than 78% yield using MeOH as a solvent (Table 1, entries 2–4). After screening the reaction temperature in the 2nd step of the one-pot process (Table 1, entries 4 and 5), it was found that the diastereomeric mixture of thioproline 3a without

Synthetic strategies toward 1,3-oxathiolane nucleoside analogues

• Umesh P. Aher,
• Dhananjai Srivastava,
• Girij P. Singh and
• Jayashree B. S

Beilstein J. Org. Chem. 2021, 17, 2680–2715, doi:10.3762/bjoc.17.182

• -oxathiolane with Trichosporon laibachii lipase and a kinetic resolution. The synthesis of enantiopure ((R)-5-acetoxy-1,3-oxathiolan-2-yl)methyl benzoate (71) was carried out from the substrates 3a, 1,4-dithiane-2,5-diol (3q), and phenyl acetate via dynamic covalent kinetic resolution. This was a one-pot

• process that reached 96.5% ee through the combination of the reversible hemithioacetal transformation and the enantioselective lactonization catalyzed by the immobilized lipase from Trichosporon laibachii (Scheme 24). As a result, the desired stereochemistry of 1,3-oxathiolane precursors 71 and 72 was

Asymmetric organocatalyzed synthesis of coumarin derivatives

• Natália M. Moreira,
• Lorena S. R. Martelli and
• Arlene G. Corrêa

Beilstein J. Org. Chem. 2021, 17, 1952–1980, doi:10.3762/bjoc.17.128

• acid (4) as catalyst [30]. Based on this pioneer work, our research group described an efficient, highly stereoselective, one-pot process comprising an organocatalytic conjugate addition of dimedone or 4-hydroxycoumarin 1 to α,β-unsaturated aldehydes 2 followed by an intramolecular isocyanide-based

Development of N-F fluorinating agents and their fluorinations: Historical perspective

• Teruo Umemoto,
• Yuhao Yang and
• Gerald B. Hammond

Beilstein J. Org. Chem. 2021, 17, 1752–1813, doi:10.3762/bjoc.17.123

Valorisation of plastic waste via metal-catalysed depolymerisation

• Francesca Liguori,
• Carmen Moreno-Marrodán and
• Pierluigi Barbaro

Beilstein J. Org. Chem. 2021, 17, 589–621, doi:10.3762/bjoc.17.53

• no need of excess of chemicals. Polymerisation was then achieved by raising the reaction temperature, without purification of the intermediate oligomers being required. An interesting one-pot process was developed that combines the use of bioderived chemicals, isosorbide and succinic acid, with PET

CF₃-substituted carbocations: underexploited intermediates with great potential in modern synthetic chemistry

• Anthony J. Fernandes,
• Armen Panossian,
• Bastien Michelet,
• Agnès Martin-Mingot,
• Frédéric R. Leroux and
• Sébastien Thibaudeau

Beilstein J. Org. Chem. 2021, 17, 343–378, doi:10.3762/bjoc.17.32

• –Crafts arylation at the C4-position led to derivatives 76. In this latter case, a two-step one-pot process was developed in order to access derivatives bearing two different aromatic rings. Mechanistic investigations were then undertaken by in situ low-temperature NMR experiments, allowing the

Novel library synthesis of 3,4-disubstituted pyridin-2(1H)-ones via cleavage of pyridine-2-oxy-7-azabenzotriazole ethers under ionic hydrogenation conditions at room temperature

• Romain Pierre,
• Anne Brethon,
• Sylvain A. Jacques,
• Aurélie Blond,
• Sandrine Chambon,
• Sandrine Talano,
• Catherine Raffin,
• Branislav Musicki,
• Claire Bouix-Peter,
• Loic Tomas,
• Gilles Ouvry,
• Rémy Morgentin,
• Laurent F. Hennequin and
• Craig S. Harris

Beilstein J. Org. Chem. 2021, 17, 156–165, doi:10.3762/bjoc.17.16

• -aminopyridine or any logical end product arising from the OAt ether degradation (Scheme 4) [16]. With these novel conditions in hand, we started the library production based on a 3-step, one-pot process: 1) amide coupling using HATU followed by removal of the solvent by sparging with nitrogen; 2) Boc

Recent progress in the synthesis of homotropane alkaloids adaline, euphococcinine and N-methyleuphococcinine

• Dimas J. P. Lima,
• Antonio E. G. Santana,
• Michael A. Birkett and
• Ricardo S. Porto

Beilstein J. Org. Chem. 2021, 17, 28–41, doi:10.3762/bjoc.17.4

• LiH2NBH3 in THF at 40 °C to provide amino alcohol (−)-44 in 88% yield. This amino alcohol underwent cyclization through a one-pot process in the presence of TPAP-NMO, which involved oxidation in generated aldehyde 45, followed by dehydrocondensation leading to N,O-tricyclic acetal (−)-46 in 80% yield

One-pot synthesis of isosorbide from cellulose or lignocellulosic biomass: a challenge?

• Isaline Bonnin,
• Raphaël Mereau,
• Thierry Tassaing and
• Karine De Oliveira Vigier

Beilstein J. Org. Chem. 2020, 16, 1713–1721, doi:10.3762/bjoc.16.143

• . Isosorbide is obtained after the hydrolysis of cellulose to glucose, followed by the hydrogenation of glucose to sorbitol that is then dehydrated to isosorbide. The one-pot process requires an acid and a hydrogenation catalyst. Several parameters are of importance during the direct conversion of (ligno

• )cellulose such as the acidity, the crystallinity and the particle size of cellulose as well as the nature of the feedstocks. This review highlights all these parameters and all the strategies employed to produce isosorbide from (ligno)cellulose in a one-pot process. Keywords: catalysis; cellulose

• dehydration to sorbitans. The dehydration of sorbitol to isosorbide required temperatures around 200 °C exposing hydrogenation catalysts to the harsh reaction conditions in the one-pot process. Unfortunately, one-step conditions seem to facilitate the deactivation of the hydrogenation catalysts, thus

Recent advances on the transition-metal-catalyzed synthesis of imidazopyridines: an updated coverage

• Gagandeep Kour Reen,
• Ashok Kumar and
• Pratibha Sharma

Beilstein J. Org. Chem. 2019, 15, 1612–1704, doi:10.3762/bjoc.15.165

• . Recently in 2014, metal–carbene complexes have been used as catalysts for the synthesis of imidazo[1,2-a]pyridines, via Cu(I) and Pd(II)-catalyzed cyclization (Scheme 10) [108]. The remarkable feature of this report was the metal carbene complex-catalyzed, one-pot process for the formation of C=O and C=C

An efficient synthesis of the guaiane sesquiterpene (−)-isoguaiene by domino metathesis

• Yuzhou Wang,
• Ahmed F. Darweesh,
• Patrick Zimdars and
• Peter Metz

Beilstein J. Org. Chem. 2019, 15, 858–862, doi:10.3762/bjoc.15.83

• ylide 21 [8] followed by alkyne generation [23] with butyllithium in a one-pot process, trienyne 3 was obtained as a 1.6:1 mixture of E and Z olefin isomers. Due to the presence of the isopropyl group at the disubstituted alkene [24] of 3, 30 mol % of the second generation Grubbs catalyst 22 were

Homo- and hetero-difunctionalized β-cyclodextrins: Short direct synthesis in gram scale and analysis of regiochemistry

• Gábor Benkovics,
• Mihály Bálint,
• Éva Fenyvesi,
• Erzsébet Varga,
• Szabolcs Béni,
• Konstantina Yannakopoulou and
• Milo Malanga

Beilstein J. Org. Chem. 2019, 15, 710–720, doi:10.3762/bjoc.15.66

• % yield, respectively. If direct iodination is used the final, readily separable 6A,6C- and 6A,6D-diazides are obtained in 26% and 28% yield, respectively, in a one pot process. Both approaches give the desired diazides in much higher yields than when using the capping reagents (5% and 12%, respectively

Synthesis and fluorescent properties of N(9)-alkylated 2-amino-6-triazolylpurines and 7-deazapurines

• Andrejs Šišuļins,
• Jonas Bucevičius,
• Yu-Ting Tseng,
• Irina Novosjolova,
• Kaspars Traskovskis,
• Ērika Bizdēna,
• Huan-Tsung Chang,
• Sigitas Tumkevičius and
• Māris Turks

Beilstein J. Org. Chem. 2019, 15, 474–489, doi:10.3762/bjoc.15.41

• -deazapurine series allowed to combine the SNAr and CuAAC reactions into an sequential one-pot process producing target products 10 and 11 directly from diazide 3. The 7-deazapurine structural analogs 10a–f and 11a–f to every purine entry were obtained with 58–80% isolated yields. UV–vis and fluorescence data