Recent advances in allylation of chiral secondary alkylcopper species

• Minjae Kim,
• Gwanggyun Kim,
• Doyoon Kim,
• Jun Hee Lee and
• Seung Hwan Cho

Beilstein J. Org. Chem. 2025, 21, 639–658, doi:10.3762/bjoc.21.51

• electrophiles While the direct formation of chiral copper species from organolithium compounds provides an efficient route to stereospecific allylic alkylation products, the requirement of stoichiometric amounts of the copper reagent limits its practical application [46]. An alternative approach utilizing more

• investigation into whether such moderate activation strategies could facilitate copper-mediated coupling reactions of sterically demanding alkylboronic esters under mild conditions. After thorough reaction optimization, t-BuLi emerged as the superior activating agent, outperforming other organolithium compounds

(E,Z)-1,1,1,4,4,4-Hexafluorobut-2-enes: hydrofluoroolefins halogenation/dehydrohalogenation cascade to reach new fluorinated allene

• Nataliia V. Kirij,
• Andrey A. Filatov,
• Yurii L. Yagupolskii,
• Sheng Peng and
• Lee Sprague

Beilstein J. Org. Chem. 2024, 20, 452–459, doi:10.3762/bjoc.20.40

• continues to be relevant. One of the methods for the synthesis of allenes was based on the interaction of bromoolefins with organolithium compounds, followed by the elimination of lithium fluoride [29][30][31]. It was logical to assume that in our case a similar reaction of the Grignard reagent 12 with

N-tert-Butanesulfinyl imines in the asymmetric synthesis of nitrogen-containing heterocycles

• Joseane A. Mendes,
• Paulo R. R. Costa,
• Miguel Yus,
• Francisco Foubelo and
• Camilla D. Buarque

Beilstein J. Org. Chem. 2021, 17, 1096–1140, doi:10.3762/bjoc.17.86

• mechanism operating in reactions involving Grignard reagents in noncoordinating solvents, such as toluene and dichloromethane, while an acyclic model [43] is common in organolithium compounds in solvents such as THF. In the cyclic model, the bulky tert-butyl group occupies an equatorial position due to

A sustainable strategy for the straightforward preparation of 2H-azirines and highly functionalized NH-aziridines from vinyl azides using a single solvent flow-batch approach

• Michael Andresini,
• Leonardo Degannaro and
• Renzo Luisi

Beilstein J. Org. Chem. 2021, 17, 203–209, doi:10.3762/bjoc.17.20

• preparation of 2H-azirines and their stereoselective transformation into highly functionalized NH-aziridines, starting from vinyl azides and organolithium compounds. The protocol has been developed using cyclopentyl methyl ether (CPME) as an environmentally benign solvent, resulting into a sustainable, safe

• and potentially automatable method for the synthesis of interesting strained compounds. Keywords: aziridines; 2H-azirines; flow chemistry; green chemistry; organolithium compounds; Introduction Since their conception in the early 1990s, Green Chemistry Principles (GCP) have been applied with

• reactions of several commercially available organolithium compounds were examined. As shown in Scheme 3, the reaction of 2a, generated in flow from 1a, proceeded smoothly also with hexyllithium (HexLi), n-butyllithium (n-BuLi) and isobutyllithium (iBuLi) affording the corresponding NH-aziridines 3b–d in

Functionalization of 4-bromobenzo[c][2,7]naphthyridine via regioselective direct ring metalation. A novel approach to analogues of pyridoacridine alkaloids

• Benedikt C. Melzer,
• Alois Plodek and
• Franz Bracher

Beilstein J. Org. Chem. 2019, 15, 2304–2310, doi:10.3762/bjoc.15.222

• amphimedine (1) [11]. 4-Chloro-5-methylbenzo[c][2,7]naphthyridine (8) was oxidized at the methyl group to give an aldehyde. Subsequent modifications of the formyl group and Stille couplings at C-4 gave a number of 4,5-disubstituted benzo[c][2,7]naphthyridines (Figure 2A) [12]. Organolithium compounds were

• ring metalation of 4-bromobenzo[c][2,7]naphthyridine (9d) the choice of an appropriate base was essential. Alkyllithium bases were not suitable, since two undesired reactions were anticipated: As mentioned above, 4-substituted benzo[c][2,7]naphthyridines tend to add organolithium compounds to the C-5

Substitution of fluorine in M[C₆F₅BF₃] with organolithium compounds: distinctions between O- and N-nucleophiles

• Anton Yu. Shabalin,
• Nicolay Yu. Adonin and
• Vadim V. Bardin

Beilstein J. Org. Chem. 2017, 13, 703–713, doi:10.3762/bjoc.13.69

• Organic Chemistry, SB RAS, Acad. Lavrentjev Ave. 9, Novosibirsk, 630090, Russian Federation 10.3762/bjoc.13.69 Abstract Borates M[C6F5BF3] (M = K, Li, Bu4N) react with organolithium compounds, RLi (R = Me, Bu, Ph), in 1,2-dimethoxyethane or diglyme to give M[4-RC6F4BF3] and M[2-RC6F4BF3]. When R is Me or

• from M[C6F5BF3] (M = K, Li and Bu4N) to alkyl-, alkynyl- and aryltetrafluorophenyltrifluoroborates using the nucleophilic substitution with some organolithium compounds. The obtained results were compared with previously reported data [31][32]. Results Reactions with MeLi An addition of MeLi (1.5 equiv

Contribution of microreactor technology and flow chemistry to the development of green and sustainable synthesis

• Flavio Fanelli,
• Giovanna Parisi,
• Leonardo Degennaro and
• Renzo Luisi

Beilstein J. Org. Chem. 2017, 13, 520–542, doi:10.3762/bjoc.13.51

•  1). The use of an integrated microflow system allowed the preparation of functionalized α-ketoamides by a three-component reaction between carbamoyllithium, methyl chloroformate and organolithium compounds bearing sensitive functional groups (i.e., NO2, COOR, epoxide, carbonyl) (Scheme 2). It should

Microsolvation and sp²-stereoinversion of monomeric α-(2,6-di-tert-butylphenyl)vinyllithium as measured by NMR

• Rudolf Knorr,
• Monika Knittl and
• Eva C. Rossmann

Beilstein J. Org. Chem. 2014, 10, 2521–2530, doi:10.3762/bjoc.10.263

• pair intermediate; monomeric alkenyllithiums; pseudoactivation parameters; sp2-stereoinversion mechanism; THF catalysis; Introduction Organolithium compounds tend to aggregate in solution unless the structure of their carbanionic part favors the nonaggregated (monomeric) species [2]. For example

Preparation of phosphines through C–P bond formation

• Iris Wauters,
• Wouter Debrouwer and
• Christian V. Stevens

Beilstein J. Org. Chem. 2014, 10, 1064–1096, doi:10.3762/bjoc.10.106

• [139][140][141][142] derivatives. Other organometallic reagents such as aluminum [143] or organomercury [26][144] reagents have been used less frequently. Grignard or organolithium compounds are highly reactive nucleophiles and do not tolerate the presence of various functional groups. As a consequence

An approach towards azafuranomycin analogs by gold-catalyzed cycloisomerization of allenes: synthesis of (αS,2R)-(2,5-dihydro-1H-pyrrol-2-yl)glycine

• Jörg Erdsack and
• Norbert Krause

Beilstein J. Org. Chem. 2013, 9, 1936–1942, doi:10.3762/bjoc.9.229

• desired dehalogenated dihydropyrrole with 66% yield (formula not shown). For the conversion of 19 to 20, we applied a bromine–lithium exchange with 2 equivalents of t-BuLi in diethyl ether at –90 °C [71], followed by hydrolysis. Even though oxazolidines are known to be sensitive towards organolithium

• compounds [19][72][73][74], dehalogenated dihydropyrrole 20 was obtained in 60% yield, together with 22% of reisolated 19. The remaining steps towards azafuranomycin analog 22 followed those established for 13a: acetal cleavage (71% yield), two-step oxidation which afforded protected amino acid 21 with 72

Directed aromatic functionalization in natural-product synthesis: Fredericamycin A, nothapodytine B, and topopyrones B and D

• Charles Dylan Turner and
• Marco A. Ciufolini

Beilstein J. Org. Chem. 2011, 7, 1475–1485, doi:10.3762/bjoc.7.171

• ; nothapodytine; organolithium compounds; topopyrone; Review Our laboratory is primarily interested in the total synthesis of natural products, and does not conduct research on directed aromatic functionalization ("DAF") per se. On numerous occasions, however, DAF technology has been key to the success of

Carbamate-directed benzylic lithiation for the diastereo- and enantioselective synthesis of diaryl ether atropisomers

• Abigail Page and
• Jonathan Clayden

Beilstein J. Org. Chem. 2011, 7, 1327–1333, doi:10.3762/bjoc.7.156

• organolithium compounds having varying degrees of configurational stability [17][18], and in our studies on ureas and amides we were able to identify correlated inversion processes linking configurational inversion at organolithium centres with conformational inversion of atropisomeric chirality by bond

Aromatic and heterocyclic perfluoroalkyl sulfides. Methods of preparation

• Vladimir N. Boiko

Beilstein J. Org. Chem. 2010, 6, 880–921, doi:10.3762/bjoc.6.88

• behavior in their reactions with nucleophiles. For example, the reaction of CF3I with alkali gives fluoroform (CHF3) and potassium hypoiodide (KIO) [122]. The interaction of organolithium compounds with perfluoroalkyl iodides [123][124][125][126] does not result in combination of the two alkyl species (RF

An efficient synthesis of novel pyrano[2,3-d]- and furopyrano[2,3-d]pyrimidines via indium- catalyzed multi- component domino reaction

• Dipak Prajapati and
• Mukut Gohain

Beilstein J. Org. Chem. 2006, 2, No. 11, doi:10.1186/1860-5397-2-11

• %). Introduction The emergence of indium(III) compounds as efficient Lewis acid catalysts presents new and exciting opportunities for organoindium chemistry. [1][2] It was found that the low reactivity of trivalent organoindium reagents can be increased by complex formation with organolithium compounds.[3] The