Intramolecular C–H arylation of pyridine derivatives with a palladium catalyst for the synthesis of multiply fused heteroaromatic compounds

• Yuki Nakanishi,
• Shoichi Sugita,
• Kentaro Okano and
• Atsunori Mori

Beilstein J. Org. Chem. 2024, 20, 3256–3262, doi:10.3762/bjoc.20.269

• % yield, respectively. The related reaction is also carried out with amides of non-pyridine derivatives terephthal- and benzamides to afford multiply fused heterocyclic compounds in 81% and 89% yields, respectively. Keywords: intramolecular C–H arylation; multiply fused heterocycles; palladium acetate

• conditions. We carried out the palladium-catalyzed intramolecular coupling reaction of precursor 1a under similar conditions [23], which afforded smooth reaction with phenanthroline bisamide, with 10 mol % of palladium acetate as a catalyst in the presence of potassium carbonate and tetra-n-butylammonium

Enantioselective synthesis of β-aryl-γ-lactam derivatives via Heck–Matsuda desymmetrization of N-protected 2,5-dihydro-1H-pyrroles

• Arnaldo G. de Oliveira Jr.,
• Martí F. Wang,
• Rafaela C. Carmona,
• Danilo M. Lustosa,
• Sergei A. Gorbatov and
• Carlos R. D. Correia

Beilstein J. Org. Chem. 2024, 20, 940–949, doi:10.3762/bjoc.20.84

• in the er. Pd(acac)2 and Pd(MeCN)2(OTs)2 were also tested without significant improvements. Despite the fact that palladium acetate slightly better performed as shown in Table 1, we decided to continue with palladium trifluoroacetate due to its higher reactivity in forming palladium complexes with N

Pyridine C(sp²)–H bond functionalization under transition-metal and rare earth metal catalysis

• Haritha Sindhe,
• Malladi Mounika Reddy,
• Karthikeyan Rajkumar,
• Akshay Kamble,
• Amardeep Singh,
• Anand Kumar and
• Satyasheel Sharma

Beilstein J. Org. Chem. 2023, 19, 820–863, doi:10.3762/bjoc.19.62

• N-oxide 119b. In 2016, Wei and co-workers [93] reported the arylation of pyridine N-oxides 9 employing potassium (hetero)aryltrifluoroborates 126 as coupling partner using palladium acetate and TBAI (Scheme 24). Electron-withdrawing and donating groups on the pyridine N-oxide 9 resulted in the

Total synthesis of decarboxyaltenusin

• Lucas Warmuth,
• Aaron Weiß,
• Marco Reinhardt,
• Anna Meschkov,
• Ute Schepers and
• Joachim Podlech

Beilstein J. Org. Chem. 2021, 17, 224–228, doi:10.3762/bjoc.17.22

• a 73% yield. The Suzuki coupling of boronate 6a and aryl bromide 9a using palladium acetate and cesium carbonate in the presence of the ligand SPhos [25] yielded biaryl 10a with virtually quantitative yield (98%, Scheme 4). Unfortunately, the removal of non-identified byproducts and of 9a (which had

In silico rationalisation of selectivity and reactivity in Pd-catalysed C–H activation reactions

• Liwei Cao,
• Mikhail Kabeshov,
• Steven V. Ley and
• Alexei A. Lapkin

Beilstein J. Org. Chem. 2020, 16, 1465–1475, doi:10.3762/bjoc.16.122

• ]. Secondly, among the intermediates refined at the previous step, their relative Gibbs energies can be used to set a threshold establishing the likeliness of electrophilic aromatic substitution mechanism for C–H activation of a particular substrate. The more stable the ipso-complex between palladium acetate

Highly selective Diels–Alder and Heck arylation reactions in a divergent synthesis of isoindolo- and pyrrolo-fused polycyclic indoles from 2-formylpyrrole

• Carlos H. Escalante,
• Eder I. Martínez-Mora,
• Carlos Espinoza-Hicks,
• Alejandro A. Camacho-Dávila,
• Fernando R. Ramos-Morales,
• Francisco Delgado and
• Joaquín Tamariz

Beilstein J. Org. Chem. 2020, 16, 1320–1334, doi:10.3762/bjoc.16.113

• ). Optimized reaction conditions were established by using 9j as the model substrate and changing the catalyst, base and solvent. Palladium acetate was not efficient for the conversion, even though the base was modified (Table 3, entries 1 and 2). Pd(PPh3)4 was a better catalyst when employing potassium

Suzuki–Miyaura cross coupling is not an informative reaction to demonstrate the performance of new solvents

• James Sherwood

Beilstein J. Org. Chem. 2020, 16, 1001–1005, doi:10.3762/bjoc.16.89

•  1b) [13]. Here, palladium acetate without an auxiliary ligand was used for a pre-catalyst and the base changed to potassium carbonate. Reaction conditions of 20 hours at 65 °C were decided after observing 11% conversion after 2 hours and 33% after 20 hours in NMP at room temperature. The majority of

Functionalization of the imidazo[1,2-a]pyridine ring in α-phosphonoacrylates and α-phosphonopropionates via microwave-assisted Mizoroki–Heck reaction

• Damian Kusy,
• Agata Wojciechowska,
• Joanna Małolepsza and
• Katarzyna M. Błażewska

Beilstein J. Org. Chem. 2020, 16, 15–21, doi:10.3762/bjoc.16.3

• , replacing palladium acetate by tetrakis(triphenylphosphine)palladium(0), Pd(PPh3)4, or bis(dibenzylideneacetone)palladium(0), Pd(dba)2, resulted in a reduction in the yield and a partial recovery of substrate 1a (Table 1, entries 13 and 14). In the next series of experiments, different amines were tested

Synthesis and characterization of bis(4-amino-2-bromo-6-methoxy)azobenzene derivatives

• David Martínez-López,
• Amirhossein Babalhavaeji,
• Diego Sampedro and
• G. Andrew Woolley

Beilstein J. Org. Chem. 2019, 15, 3000–3008, doi:10.3762/bjoc.15.296

• -morpholinophenyl)diazene (4): (E)-1,2-Bis(2-methoxy-4-morpholinophenyl)diazene (9, 30 mg, 0.07 mmol) was dissolved in DCM. To this solution, palladium acetate (1.6 mg, 0.007 mmol) was added, and the resulting mixture was stirred for 15 minutes. Then, N-bromosuccinimide (28.6 mg, 0.16 mmol) was added to the

• (3-bromo-5-methoxy-4,1-phenylene)-(E)-bis(1λ4-piperazine-1-carboxylate) (11): Di-tert-butyl 4,4'-(diazene-1,2-diyl)bis(3-methoxy-4,1-phenylene)-(E)-bis(1λ4-piperazine-1-carboxylate) (10, 30 mg, 0.04 mmol) was dissolved in DCM, palladium acetate (1 mg, 0.004 mmol) was added, and the resulting mixture

Palladium-catalyzed Sonogashira coupling reactions in γ-valerolactone-based ionic liquids

• László Orha,
• József M. Tukacs,
• László Kollár and
• László T. Mika

Beilstein J. Org. Chem. 2019, 15, 2907–2913, doi:10.3762/bjoc.15.284

• that while Pd(PPh3)4, palladium acetate (Pd(OAc)2), PdCl2(PPh3)2, and tris(dibenzylideneacetone)dipalladium (Pd2(DBA)3) all catalyzed the Sonogashira reaction, the PdCl2(PPh3)2 precursor turned out to have the best activity in the light of reaction rates (Figure 1). In the presence of 0.5 mol % of

Recent advances on the transition-metal-catalyzed synthesis of imidazopyridines: an updated coverage

• Gagandeep Kour Reen,
• Ashok Kumar and
• Pratibha Sharma

Beilstein J. Org. Chem. 2019, 15, 1612–1704, doi:10.3762/bjoc.15.165

Synthesis of benzannelated sultams by intramolecular Pd-catalyzed arylation of tertiary sulfonamides

• Valentin A. Rassadin,
• Mirko Scholz,
• Anastasiia A. Klochkova,
• Armin de Meijere and
• Victor V. Sokolov

Beilstein J. Org. Chem. 2017, 13, 1932–1939, doi:10.3762/bjoc.13.187

• precursor 20 was prepared in one step from the respective sulfonamide 19 and 2-iodobenzyl alcohol employing a Mitsunobu protocol (Scheme 6) [49]. Treatment of 20 with palladium acetate, Ph3P, and sodium hydride in dioxane at 90 °С for 20 h furnished the target sultam 21 in 49% yield. Apparently, the

Direct catalytic arylation of heteroarenes with meso-bromophenyl-substituted porphyrins

• Alexei N. Kiselev,
• Olga K. Grigorova,
• Alexei D. Averin,
• Sergei A. Syrbu,
• Oskar I. Koifman and
• Irina P. Beletskaya

Beilstein J. Org. Chem. 2017, 13, 1524–1532, doi:10.3762/bjoc.13.152

• without any additional ligand was shown to be advantageous over catalytic systems with phosphine ligands. Osuka also used this approach for β-arylation of porphyrins. In this ligandless reaction the Pd(0) species from palladium acetate could be provided by the traces of amine present in DMA, and the

Iodination of carbohydrate-derived 1,2-oxazines to enantiopure 5-iodo-3,6-dihydro-2H-1,2-oxazines and subsequent palladium-catalyzed cross-coupling reactions

• Michal Medvecký,
• Igor Linder,
• Luise Schefzig,
• Hans-Ulrich Reissig and
• Reinhold Zimmer

Beilstein J. Org. Chem. 2016, 12, 2898–2905, doi:10.3762/bjoc.12.289

• component in other Sonogashira couplings presented in former publications [23][32]. The reaction of syn-4a and alkyne 10 using palladium acetate, triphenylphosphine, and copper(I) iodide in a solvent mixture of diisopropylamine and DMF at room temperature gave the 5-(imidazolylethynyl)-substituted 1,2

Flow carbonylation of sterically hindered ortho-substituted iodoarenes

• Carl J. Mallia,
• Gary C. Walter and
• Ian R. Baxendale

Beilstein J. Org. Chem. 2016, 12, 1503–1511, doi:10.3762/bjoc.12.147

• synthesis of ortho-substituted carboxylic acids, using carbon monoxide gas, has been studied for a number of substrates. The optimised conditions make use of a simple catalyst system compromising of triphenylphosphine as the ligand and palladium acetate as the pre-catalyst. Carbon monoxide was introduced

A convenient route to symmetrically and unsymmetrically substituted 3,5-diaryl-2,4,6-trimethylpyridines via Suzuki–Miyaura cross-coupling reaction

• Dariusz Błachut,
• Joanna Szawkało and
• Zbigniew Czarnocki

Beilstein J. Org. Chem. 2016, 12, 835–845, doi:10.3762/bjoc.12.82

• > NO2 > CO2H > OMe > F > H [38][39]. The results of a series of the preliminary reactions are summarized in Table 1 and in Supporting Information File 1. The ligand-free system based on palladium acetate (10 mol %) or palladium chloride (10 mol %) in the presence of K3PO4 and K2CO3 in a mixture of

• , especially in water-based solvents, is important from the point of view of so-called “green chemistry” and also its economic efficiency [44][45]. In our hands, all attempts to carry out the reaction with both palladium acetate or palladium chloride gave the desired diarylated product 4 with unacceptable

Pyridinoacridine alkaloids of marine origin: NMR and MS spectral data, synthesis, biosynthesis and biological activity

• Louis P. Sandjo,
• Victor Kuete and
• Maique W. Biavatti

Beilstein J. Org. Chem. 2015, 11, 1667–1699, doi:10.3762/bjoc.11.183

• was subsequently transformed into a quinolone benzyl ether under reflux conditions. A quinoline triflate ester was prepared from the quinolone and coupled to trimethyl(2-nitrophenyl)stannane by Stille coupling catalyzed by palladium acetate. The afforded nitrophenylquinoline was hydrolyzed and

Highly selective palladium–benzothiazole carbene-catalyzed allylation of active methylene compounds under neutral conditions

• Antonio Monopoli,
• Pietro Cotugno,
• Carlo G. Zambonin,
• Francesco Ciminale and
• Angelo Nacci

Beilstein J. Org. Chem. 2015, 11, 994–999, doi:10.3762/bjoc.11.111

• necessary for the proton abstraction at the C2 position of the thiazolium salt. In addition, the use of sub-stoichiometric amounts of V afforded correspondingly lower conversions without altering the chemoselectivity of the process (Table 1, entry 13). If palladium acetate was used as precatalyst, an

Rational design of cyclopropane-based chiral PHOX ligands for intermolecular asymmetric Heck reaction

• Marina Rubina,
• William M. Sherrill,
• Alexey Yu. Barkov and
• Michael Rubin

Beilstein J. Org. Chem. 2014, 10, 1536–1548, doi:10.3762/bjoc.10.158

• tested in the asymmetric arylation reaction of 2,3-dihydrofuran under various reaction conditions (Table 1). It was found that the reaction proceeded efficiently, yet with only moderate enantioselectivity, in the presence of palladium acetate and Hünig’s base (Table 1, entry 3). Interestingly, the

Practical synthesis of aryl-2-methyl-3-butyn-2-ols from aryl bromides via conventional and decarboxylative copper-free Sonogashira coupling reactions

• Andrea Caporale,
• Stefano Tartaggia,
• Andrea Castellin and
• Ottorino De Lucchi

Beilstein J. Org. Chem. 2014, 10, 384–393, doi:10.3762/bjoc.10.36

• between 3-bromoaniline (1a) and 4 to give 2-methyl-4-(3-aminophenyl)-3-butyn-2-ol (2a) (Table 1), we screened different bases, solvents and ligands in the absence of copper. We firstly examined the coupling reaction using a catalytic system based on palladium acetate and triphenylphosphine in presence of

Synthesis of five- and six-membered cyclic organic peroxides: Key transformations into peroxide ring-retaining products

• Alexander O. Terent'ev,
• Dmitry A. Borisov,
• Vera A. Vil’ and
• Valery M. Dembitsky

Beilstein J. Org. Chem. 2014, 10, 34–114, doi:10.3762/bjoc.10.6

• ). The cyclization was performed in toluene, 1,4-dioxane, or 1,2-dichloroethane at 80 °C for 3 h in the presence of p-benzoquinone or silver carbonate as the oxidizing agent for Pd(0) that was formed in the catalytic cycle. To the best of our knowledge, this method is the first example of a palladium

• acetate-catalyzed synthesis of cyclic peroxides [336]. 3.10. Acid-mediated cyclizations of peroxides The intramolecular cyclization of unsaturated peroxyacetals 273a–d in the presence of TiCl4 or SnCl4 occurs via formation of peroxycarbenium ions to give methoxy- and chlorine-containing dioxanes 274a–d as

Recent advances in transition metal-catalyzed Csp²-monofluoro-, difluoro-, perfluoromethylation and trifluoromethylthiolation

• Grégory Landelle,
• Armen Panossian,
• Sergiy Pazenok,
• Jean-Pierre Vors and
• Frédéric R. Leroux

Beilstein J. Org. Chem. 2013, 9, 2476–2536, doi:10.3762/bjoc.9.287

• CF3-source. A single study on palladium-catalyzed trifluoromethylation of sp2-C–H bonds was reported by G. Liu and coworkers [72]. It described the introduction of a CF3 group at the 2-position of indoles using palladium acetate as a catalyst and the Ruppert–Prakash reagent TMSCF3. A screening of

Simple and rapid hydrogenation of p-nitrophenol with aqueous formic acid in catalytic flow reactors

• Rahat Javaid,
• Shin-ichiro Kawasaki,
• Akira Suzuki and
• Toshishige M. Suzuki

Beilstein J. Org. Chem. 2013, 9, 1156–1163, doi:10.3762/bjoc.9.129

• demonstrates the robustness of the present catalytic reactors. Experimental Materials and reagents Reagent-grade formic acid (HCO2H, 98%), p-nitrophenol, palladium acetate [Pd(CH3COO)2], silver nitrate (AgNO3), disodium ethylenediamine tetraacetate (EDTA–Na2), ammonia (NH3, 28%), hydrazine monohydrate, nitric

Synthesis of 5-oxyquinoline derivatives for reversal of multidrug resistance

• Torsten Dittrich,
• Nils Hanekop,
• Nacera Infed,
• Lutz Schmitt and
• Manfred Braun

Beilstein J. Org. Chem. 2012, 8, 1700–1704, doi:10.3762/bjoc.8.193

• -4-arylaminopiperidines 17 and 18 A 25 mL two-necked flask, equipped with a magnetic stirrer and a connection to a combined argon/vacuum line was charged with piperidine 19 or 20 (3.6 mmol), the corresponding aryl bromide (3.6 mmol), sodium tert-butoxide (0.43 g, 4.5 mmol) and palladium acetate (10.1

Impact of cyclodextrins on the behavior of amphiphilic ligands in aqueous organometallic catalysis

• Hervé Bricout,
• Estelle Léonard,
• Christophe Len,
• David Landy,
• Frédéric Hapiot and
• Eric Monflier

Beilstein J. Org. Chem. 2012, 8, 1479–1484, doi:10.3762/bjoc.8.167

• combination have been evaluated in the aqueous Pd-catalyzed cleavage reaction of allyl undecyl carbonate (Scheme 1). The reactions were performed at room temperature under nitrogen by using palladium acetate as a catalyst precursor, phosphanes 1–4 as hydrosoluble ligands, and diethylamine as an allyl