Quantification of lead through rod-shaped silver-doped zinc oxide nanoparticles using an electrochemical approach

• Ravinder Lamba,
• Gaurav Bhanjana,
• Neeraj Dilbaghi,
• Vivek Gupta and
• Sandeep Kumar

Beilstein J. Nanotechnol. 2025, 16, 422–434, doi:10.3762/bjnano.16.33

• , environmental impact, can cause electrode corrosion, enhances interference, and is incompatible with real-life or biological samples. Therefore, PBS with pH 7 has been used for electrochemical studies since it provides a stable pH, which is crucial for maintaining consistent electrochemical conditions during

Engineered PEG–PCL nanoparticles enable sensitive and selective detection of sodium dodecyl sulfate: a qualitative and quantitative analysis

• Soni Prajapati and
• Ranjana Singh

Beilstein J. Nanotechnol. 2025, 16, 385–396, doi:10.3762/bjnano.16.29

• need to develop qualitative and quantitative methods for its detection. The SDS estimation is necessary due to its harmful environmental impact, as its use has significantly increased. Exposure to varying concentrations of sodium dodecyl sulfate elicited morphological alterations in the kidney and

A review of metal-organic frameworks and polymers in mixed matrix membranes for CO₂ capture

• Charlotte Skjold Qvist Christensen,
• Nicholas Hansen,
• Mahboubeh Motadayen,
• Nina Lock,
• Martin Lahn Henriksen and
• Jonathan Quinson

Beilstein J. Nanotechnol. 2025, 16, 155–186, doi:10.3762/bjnano.16.14

• unprecedented climate change with profound ecological and environmental consequences [1]. Therefore, the urgency of mitigating the environmental impact of elevated CO2 levels raises a strong motivation to achieve large-scale reduction of CO2 emissions [2]. In this context, CO2 capture processes have received

Quantum-to-classical modeling of monolayer Ge₂Se₂ and its application in photovoltaic devices

• Anup Shrivastava,
• Shivani Saini,
• Dolly Kumari,
• Sanjai Singh and
• Jost Adam

Beilstein J. Nanotechnol. 2024, 15, 1153–1169, doi:10.3762/bjnano.15.94

• theory; hole transport layer; optical properties; solar cells; Introduction Reducing fossil fuels and their harmful environmental impact requires improvements in green, sustainable energy sources. Among the various sources of green energy generation, solar energy has been identified as the most

Electrospun polysuccinimide scaffolds containing different salts as potential wound dressing material

• Veronika Pálos,
• Krisztina S. Nagy,
• Rita Pázmány,
• Krisztina Juriga-Tóth,
• Bálint Budavári,
• Judit Domokos,
• Dóra Szabó,
• Ákos Zsembery and
• Angela Jedlovszky-Hajdu

Beilstein J. Nanotechnol. 2024, 15, 781–796, doi:10.3762/bjnano.15.65

• polymeric scaffold containing polysuccinimide (PSI) and antibacterial salts. Antibacterial agents for therapeutical purposes mostly contain silver ions which are associated with high environmental impact and, in some cases, may cause undesired immune reactions. In our work, we prepared nanofibrous systems

• to apply silver ions, which are frequently used in clinical practice. However, they can cause a large environmental burden [26][27] and, in some cases, allergies [28]. Since urgent actions are needed to stop AMR and avoid the negative environmental impact, developing other agents and treatment

Green synthesis of biomass-derived carbon quantum dots for photocatalytic degradation of methylene blue

• Dalia Chávez-García,
• Mario Guzman,
• Viridiana Sanchez and
• Rubén D. Cadena-Nava

Beilstein J. Nanotechnol. 2024, 15, 755–766, doi:10.3762/bjnano.15.63

• to provide a greener and more efficient solution for wastewater treatment in the textile industry, reducing environmental impact and conserving clean water resources. This research represents a significant step towards addressing water pollution caused by the textile industry, and highlights the

Mixed oxides with corundum-type structure obtained from recycling can seals as paint pigments: color stability

• Dienifer F. L. Horsth,
• Julia de O. Primo,
• Nayara Balaba,
• Fauze J. Anaissi and
• Carla Bittencourt

Beilstein J. Nanotechnol. 2023, 14, 467–477, doi:10.3762/bjnano.14.37

• a reduction to 5% in greenhouse gas emissions compared to the direct synthesis, reducing the environmental impact. Besides, one ton of recycled aluminium saves up to eight metric tons of bauxite [3][4]. The amount of recycled aluminium packaging depends on individual national recycling policies

Non-stoichiometric magnetite as catalyst for the photocatalytic degradation of phenol and 2,6-dibromo-4-methylphenol – a new approach in water treatment

• Joanna Kisała,
• Anna Tomaszewska and
• Przemysław Kolek

Beilstein J. Nanotechnol. 2022, 13, 1531–1540, doi:10.3762/bjnano.13.126

• environmental impact. The progress of the reaction was monitored by measuring the organic compound concentration. In order to determine the efficiency of the photocatalytic process, the organic compounds were also degradated through ozonolysis. Results and Discussion The selected catalysts were characterized by

Progress and innovation of nanostructured sulfur cathodes and metal-free anodes for room-temperature Na–S batteries

• Marina Tabuyo-Martínez,
• Bernd Wicklein and
• Pilar Aranda

Beilstein J. Nanotechnol. 2021, 12, 995–1020, doi:10.3762/bjnano.12.75

• The revival of Na–S batteries has triggered enormous research within this field. Important drivers are, besides the high theoretical capacity and energy density values, aspects of sustainability, environmental impact, and geo-economic concerns. Sodium and sulfur are amongst the most abundant elements

The role of deep eutectic solvents and carrageenan in synthesizing biocompatible anisotropic metal nanoparticles

• Nabojit Das,
• Akash Kumar and
• Raja Gopal Rayavarapu

Beilstein J. Nanotechnol. 2021, 12, 924–938, doi:10.3762/bjnano.12.69

• of CTAB-capped gold nanorods on estuarine model systems (consisting of sediments, plants, microbial films, fish, and snails) for observing ecological and environmental impact [71]. The results showed that the biofilms were the primary route through which gold nanorods enters the food chain. It is

ZnO and MXenes as electrode materials for supercapacitor devices

• Ameen Uddin Ammar,
• Ipek Deniz Yildirim,
• Feray Bakan and
• Emre Erdem

Beilstein J. Nanotechnol. 2021, 12, 49–57, doi:10.3762/bjnano.12.4

• MXenes as electrode material for their use in supercapacitor devices. MXenes as electrode material in supercapacitors Today, there is a great interest in renewable energy sources, such as solar and wind, for various reasons, such as the depletion of fossil fuels and the smaller environmental impact [15

Antimicrobial metal-based nanoparticles: a review on their synthesis, types and antimicrobial action

• Matías Guerrero Correa,
• Fernanda B. Martínez,
• Cristian Patiño Vidal,
• Camilo Streitt,
• Juan Escrig and
• Carol Lopez de Dicastillo

Beilstein J. Nanotechnol. 2020, 11, 1450–1469, doi:10.3762/bjnano.11.129

• received significant attention regarding their low environmental impact compared to other procedures [12][13]. There are different routes in which the green synthesis methods are applied through the use of microorganisms and plants in a safe, efficient, and profitable manner [14]. Different types of metal

• synthesis method, which is attracting much attention lately due to its reduced environmental impact. Most nanoparticles are based on metal and metal-oxide compounds, and the strategies used to control their delivery and to increase their antimicrobial activity have been related to the use of silica

Recent progress in perovskite solar cells: the perovskite layer

• Xianfeng Dai,
• Ke Xu and
• Fanan Wei

Beilstein J. Nanotechnol. 2020, 11, 51–60, doi:10.3762/bjnano.11.5

• continue to emerge [63]. Although some progress on the stability and scalability has been made, these two issues will still be the main challenges of commercializing PSCs in the future. In addition, the environmental impact of lead pollution from Pb-based perovskite materials also limits the large-scale

Nontoxic pyrite iron sulfide nanocrystals as second electron acceptor in PTB7:PC₇₁BM-based organic photovoltaic cells

• Olivia Amargós-Reyes,
• José-Luis Maldonado,
• Omar Martínez-Alvarez,
• María-Elena Nicho,
• José Santos-Cruz,
• Juan Nicasio-Collazo,
• Irving Caballero-Quintana and
• Concepción Arenas-Arrocena

Beilstein J. Nanotechnol. 2019, 10, 2238–2250, doi:10.3762/bjnano.10.216

• have been widely studied due to their advantages such as low-cost, easy fabrication, flexibility, low environmental impact and semitransparency [21][22][23]. Nowadays, OPVs have already achieved a power conversion efficiency (PCE) of 17.3% in the tandem architecture [24]. Also, commercial OPV panels

Tailoring the stability/aggregation of one-dimensional TiO₂(B)/titanate nanowires using surfactants

• Atiđa Selmani,
• Johannes Lützenkirchen,
• Kristina Kučanda,
• Dario Dabić,
• Engelbert Redel,
• Ida Delač Marion,
• Damir Kralj,
• Darija Domazet Jurašin and
• Maja Dutour Sikirić

Beilstein J. Nanotechnol. 2019, 10, 1024–1037, doi:10.3762/bjnano.10.103

• environmental impact. Due to their high abundance in aqueous environments and their rich technological applicability, surfactants are among the most interesting compounds used for tailoring the stability. The aim of this paper is to determine the influence of surfactant molecular structure on TNW stability

Outstanding chain-extension effect and high UV resistance of polybutylene succinate containing amino-acid-modified layered double hydroxides

• Adam A. Marek,
• Vincent Verney,
• Christine Taviot-Gueho,
• Grazia Totaro,
• Laura Sisti,
• Annamaria Celli and
• Fabrice Leroux

Beilstein J. Nanotechnol. 2019, 10, 684–695, doi:10.3762/bjnano.10.68

• ]. LDHs are considered to be “green” and low environmental impact fillers [12], biocompatible [13] and food compatible [14]. Indeed the choice of organo-modified LDH using amino acids, and among them the protein-building amino acids, has already been demonstrated [15]. Having in mind that UV stabilization

Nanocellulose: Recent advances and its prospects in environmental remediation

• Katrina Pui Yee Shak,
• Yean Ling Pang and
• Shee Keat Mah

Beilstein J. Nanotechnol. 2018, 9, 2479–2498, doi:10.3762/bjnano.9.232

• -specific and true only under certain conditions [35]. Conversely, CNC properties are source-dependent, thus suitable cellulosic raw material and appropriate extraction techniques must be established based on the required final CNC properties and applications [33]. Furthermore, the environmental impact

Lead-free hybrid perovskites for photovoltaics

• Oleksandr Stroyuk

Beilstein J. Nanotechnol. 2018, 9, 2209–2235, doi:10.3762/bjnano.9.207

• well as issues of stability, environmental impact and possible recycling of the Pb-HP-based devices [11][12][13][16][23][26][27][29][30][31][32][33][34][35][36][37][38][39][40][41][42][43][44][45][46][47][48][49][50]. A tremendous amount of work has been performed in searching for the most efficient

Review on nanoparticles and nanostructured materials: history, sources, toxicity and regulations

• Jaison Jeevanandam,
• Ahmed Barhoum,
• Yen S. Chan,
• Alain Dufresne and
• Michael K. Danquah

Beilstein J. Nanotechnol. 2018, 9, 1050–1074, doi:10.3762/bjnano.9.98

Review: Electrostatically actuated nanobeam-based nanoelectromechanical switches – materials solutions and operational conditions

• Liga Jasulaneca,
• Jelena Kosmaca,
• Raimonds Meija,
• Jana Andzane and
• Donats Erts

Beilstein J. Nanotechnol. 2018, 9, 271–300, doi:10.3762/bjnano.9.29

Study of the correlation between sensing performance and surface morphology of inkjet-printed aqueous graphene-based chemiresistors for NO₂ detection

• F. Villani,
• C. Schiattarella,
• T. Polichetti,
• R. Di Capua,
• F. Loffredo,
• B. Alfano,
• M. L. Miglietta,
• E. Massera,
• L. Verdoliva and
• G. Di Francia

Beilstein J. Nanotechnol. 2017, 8, 1023–1031, doi:10.3762/bjnano.8.103

• -boiling and need to be handled with care because of their toxicity. Recently, the potential to effectively exfoliate natural graphite in a hydro-alcoholic mixture in a process of low environmental impact has been demonstrated [8]. In general, the liquid-phase preparation of graphene extends its

• suspension synthesized by using eco-friendly solvents deposited onto recyclable substrates by IJP well meets the technological requirements for the production of low-environmental impact, low-cost sensing devices. The aim of the current research is a feasibility study of chemiresistive gas sensors by inkjet

Needs and challenges for assessing the environmental impacts of engineered nanomaterials (ENMs)

• Michelle Romero-Franco,
• Hilary A. Godwin,
• Muhammad Bilal and
• Yoram Cohen

Beilstein J. Nanotechnol. 2017, 8, 989–1014, doi:10.3762/bjnano.8.101

• /bjnano.8.101 Abstract The potential environmental impact of nanomaterials is a critical concern and the ability to assess these potential impacts is top priority for the progress of sustainable nanotechnology. Risk assessment tools are needed to enable decision makers to rapidly assess the potential

• process for evaluating the potential impacts of ENMs would be to use existing frameworks that were developed to assess the environmental health and safety (EHS) impacts of new chemicals and new industrial technologies more broadly. One such general framework is Environmental Impact Assessment (EIA), which

• Nanotool [53] and the Web-Based Tool for Risk Prioritization of Airborne Manufactured Nano Objects (Stoffenmanager Nano) [54]. The potential for using existing frameworks for environmental impact/risk assessment and other relevant health and safety assessment of ENMs was evaluated systematically (see

Biological and biomimetic materials and surfaces

• Stanislav Gorb and
• Thomas Speck

Beilstein J. Nanotechnol. 2017, 8, 403–407, doi:10.3762/bjnano.8.42

• systematic comparative product sustainability assessment (PROSA), the authors demonstrated that this cost-effective and resource-saving product is indeed biomimetic. It is also shown that Lotusan® has a low environmental impact [21]. The regular solution theory was applied by Akerboom et al. to study the

The cleaner, the greener? Product sustainability assessment of the biomimetic façade paint Lotusan^® in comparison to the conventional façade paint Jumbosil^®

• Florian Antony,
• Rainer Grießhammer,
• Thomas Speck and
• Olga Speck

Beilstein J. Nanotechnol. 2016, 7, 2100–2115, doi:10.3762/bjnano.7.200

• assessment: In the course of the life-cycle impact assessment (LCIA), potential environmental impacts of the two compared façade paints are determined by linking the LCI results, namely materials flow and energy flow, to specific environmental impact categories. According to the requirements of [41], the

• has been put on selecting such impact categories providing maximum transparency and representing the scientific state of the art. Result monitoring was carried out by using a combination of four environmental impact assessment models, including the cumulative energy demand (CEDfossil, CEDnuclear

• , CEDnon-renewable as sum of the aforementioned), the ReCiPe environmental impact assessment model in the version of 2008, the IPCC method regarding the global warming potential (GWP) and the USEtox model for dealing with toxicology aspects related to the production and use of the two paints. A short

Nanoinformatics for environmental health and biomedicine

• Rong Liu and
• Yoram Cohen

Beilstein J. Nanotechnol. 2015, 6, 2449–2451, doi:10.3762/bjnano.6.253

• nanomaterials, which provides critical information for the environmental impact assessment of nanomaterials [18]. Another contribution addresses the issue of nanomaterial risk assessment and proposes a decision analysis scheme for furthering nanoinformatics work [19]. This work considers an array of decision