Recent advances in photothermal nanomaterials for ophthalmic applications

• Jiayuan Zhuang,
• Linhui Jia,
• Chenghao Li,
• Rui Yang,
• Jiapeng Wang,
• Wen-an Wang,
• Heng Zhou and
• Xiangxia Luo

Beilstein J. Nanotechnol. 2025, 16, 195–215, doi:10.3762/bjnano.16.16

• photothermal conversion capabilities. For instance, titanium dioxide (TiO2) with a bandgap of 3.3 eV, which is transparent to visible light, primarily absorbs ultraviolet light, and common semiconductor materials are only weakly absorbent in the NIR range (Figure 2h) [78]. In comparison to LSPR metals and

Quantum-to-classical modeling of monolayer Ge₂Se₂ and its application in photovoltaic devices

• Anup Shrivastava,
• Shivani Saini,
• Dolly Kumari,
• Sanjai Singh and
• Jost Adam

Beilstein J. Nanotechnol. 2024, 15, 1153–1169, doi:10.3762/bjnano.15.94

• a HTL. The schematic of the proposed solar cell is shown in Figure 6a. The proposed structure consists of a lead-free Perovskite layer as an absorber, titanium dioxide (TiO2) as ETL, and Ge2Se2 as HTL. A 100 nm thick layer of FTO is used to encapsulate the transport and absorber layers and treated

Photocatalytic methane oxidation over a TiO₂/SiNWs p–n junction catalyst at room temperature

• Qui Thanh Hoai Ta,
• Luan Minh Nguyen,
• Ngoc Hoi Nguyen,
• Phan Khanh Thinh Nguyen and
• Dai Hai Nguyen

Beilstein J. Nanotechnol. 2024, 15, 1132–1141, doi:10.3762/bjnano.15.92

• valuable products such as formaldehyde (HCHO), methanol (CH3OH), and other value-added oxygenates, which serve as essential precursors in various manufacturing and production processes [18][19]. The n-type semiconductor titanium dioxide (TiO2) has been discovered as a potential photocatalyst material

Comparative electron microscopy particle sizing of TiO₂ pigments: sample preparation and measurement

• Ralf Theissmann,
• Christopher Drury,
• Markus Rohe,
• Thomas Koch,
• Jochen Winkler and
• Petr Pikal

Beilstein J. Nanotechnol. 2024, 15, 317–332, doi:10.3762/bjnano.15.29

• Germany GmbH, Dr.-Rudolf-Sachtleben-Str. 4, 47198 Duisburg, Germany Billions Europe Ltd. (LB Group), Winder House, Kingfisher Way, Stockton on Tees, TS18 3EX, United Kingdom R&D, PRECHEZA, nábř. Dr. Edvarda Beneše 1170/24, 750 02 Přerov, Czech Republic 10.3762/bjnano.15.29 Abstract Titanium dioxide (TiO2

Sodium doping in brookite TiO₂ enhances its photocatalytic activity

• Boxiang Zhuang,
• Honglong Shi,
• Honglei Zhang and
• Zeqian Zhang

Beilstein J. Nanotechnol. 2022, 13, 599–609, doi:10.3762/bjnano.13.52

• ; Introduction Titanium dioxide (TiO2) has been extensively studied for many potential applications in the environmental and energy fields, such as treatment of polluted water [1][2], air purification [3][4], and water splitting [5][6]. In recent years, the interest in the brookite phase of TiO2 has been

Micro- and nanotechnology in biomedical engineering for cartilage tissue regeneration in osteoarthritis

• Zahra Nabizadeh,
• Mahmoud Nasrollahzadeh,
• Hamed Daemi,
• Mohamadreza Baghaban Eslaminejad,
• Ali Akbar Shabani,
• Mehdi Dadashpour,
• Majid Mirmohammadkhani and
• Davood Nasrabadi

Beilstein J. Nanotechnol. 2022, 13, 363–389, doi:10.3762/bjnano.13.31

• nanotubes exhibit considerable results regarding bone TE due to their ability to provide a surface with proper roughness, which facilitates osteoblast attachment and proliferation, and can provide an active site for the deposition of inorganic calcium apatite [138]. In addition to silica, titanium dioxide

• (TiO2) nanotubes have recently attracted widespread attention in the biomedical field due to the great biocompatibility, large specific surface area, and the provision of an inner space capable of being filled with drugs and bioactive molecules [139][140]. Recently, TiO2 nanotubes have been introduced

Engineered titania nanomaterials in advanced clinical applications

• Padmavati Sahare,
• Paulina Govea Alvarez,
• Juan Manual Sanchez Yanez,
• Gabriel Luna-Bárcenas,
• Samik Chakraborty,
• Sujay Paul and
• Miriam Estevez

Beilstein J. Nanotechnol. 2022, 13, 201–218, doi:10.3762/bjnano.13.15

• review aims to present a comprehensive and up-to-date overview of TiO2-based nanotherapeutics and the corresponding future challenges. Keywords: clinical application; nanostructures; physicochemical; theranostics; titanium dioxide (TiO2); Introduction Nanomaterials can be described as any organic

A review on the biological effects of nanomaterials on silkworm (Bombyx mori)

• Sandra Senyo Fometu,
• Guohua Wu,
• Lin Ma and
• Joan Shine Davids

Beilstein J. Nanotechnol. 2021, 12, 190–202, doi:10.3762/bjnano.12.15

• to generate more reactive oxygen species (ROS) and to induce oxidative stress could be a reason for their antibacterial activity against R. solanacearum in tobacco plants [23]. Aside from MgO NPs, other nanomaterials, including titanium dioxide (TiO2 NPs), zinc oxide (ZnO NPs), copper oxide (CuO NPs

Unravelling the interfacial interaction in mesoporous SiO₂@nickel phyllosilicate/TiO₂ core–shell nanostructures for photocatalytic activity

• Bridget K. Mutuma,
• Xiluva Mathebula,
• Isaac Nongwe,
• Bonakele P. Mtolo,
• Boitumelo J. Matsoso,
• Rudolph Erasmus,
• Zikhona Tetana and
• Neil J. Coville

Beilstein J. Nanotechnol. 2020, 11, 1834–1846, doi:10.3762/bjnano.11.165

• inertness, low cost, and non-toxicity, titanium dioxide (TiO2) has been widely used as a photocatalyst in the degradation of dyes in textile industries as well as in water-treatment systems [5][6]. There are three different phases of TiO2, namely anatase, rutile, and brookite. Compared to the rutile and

High permittivity, breakdown strength, and energy storage density of polythiophene-encapsulated BaTiO₃ nanoparticles

• Adnanullah Khan,
• Amir Habib and
• Adeel Afzal

Beilstein J. Nanotechnol. 2020, 11, 1190–1197, doi:10.3762/bjnano.11.103

• dioxide (TiO2 Tronox, 99.5%, Tronox Pigments GmbH) are used as Ba and Ti precursors for the hydrothermal synthesis of BTO nanoparticles. Ba(OH)2·8H2O also acts as the mineralizer and prevents the use of NaOH or KOH for controlling the pH value of the reaction mixture [12]. Equimolar amounts of Ba and Ti

• storage density. We believe BTO-PTh nanoparticles are a promising material and this design is a noteworthy strategy for future research and advanced microelectronic and energy storage applications. Experimental Barium hydroxide octahydrate (Ba(OH)2·8H2O, ≥98%, Sigma-Aldrich) and fine-grained titanium

Adsorption behavior of tin phthalocyanine onto the (110) face of rutile TiO₂

• Lukasz Bodek,
• Mads Engelund,
• Aleksandra Cebrat and
• Bartosz Such

Beilstein J. Nanotechnol. 2020, 11, 821–828, doi:10.3762/bjnano.11.67

• tunneling microscopy (STM); tin phthalocyanine (SnPc); titanium dioxide (TiO2); Introduction Phthalocyanines (Pcs) are aromatic molecules that can form metal complexes with a variety of elements, which can be used to tune molecular properties, such as position or shape of adsorption bands. Therefore, Pcs

Effect of Ag loading position on the photocatalytic performance of TiO₂ nanocolumn arrays

• Jinghan Xu,
• Yanqi Liu and
• Yan Zhao

Beilstein J. Nanotechnol. 2020, 11, 717–728, doi:10.3762/bjnano.11.59

• Since 1972, when Shimada and Honda discovered the photocatalysis of titanium dioxide (TiO2) under ultraviolet light, research in this field has continued to grow [1]. Recently, TiO2 has been utilized in the fields of photocatalytic water decomposition [2], photocatalytic organic degradation [3], and

A novel dry-blending method to reduce the coefficient of thermal expansion of polymer templates for OTFT electrodes

• Xiangdong Ye,
• Bo Tian,
• Yuxuan Guo,
• Fan Fan and
• Anjiang Cai

Beilstein J. Nanotechnol. 2020, 11, 671–677, doi:10.3762/bjnano.11.53

• . González-Benito et al. [11] used high-energy ball cryomilling to uniformly disperse 5 wt % of titanium dioxide (TiO2) nanoparticles with a size of 65 nm within poly(ethylene-co-vinyl acetate) (EVA) to subsequently obtain a film of the composite with lower CTE by hot pressing. Ren et al. [12] first prepared

Atomic-resolution imaging of rutile TiO₂(110)-(1 × 2) reconstructed surface by non-contact atomic force microscopy

• Daiki Katsube,
• Shoki Ojima,
• Eiichi Inami and
• Masayuki Abe

Beilstein J. Nanotechnol. 2020, 11, 443–449, doi:10.3762/bjnano.11.35

• force microscopy; (1 × 2) reconstruction; rutile; surface structure; titanium dioxide (TiO2); Introduction Titanium dioxide (TiO2) is a well-known photocatalyst and has been studied for applications in water splitting and the coating of materials [1]. To optimize the photocatalytic function, it is

Improved adsorption and degradation performance by S-doping of (001)-TiO₂

• Xiao-Yu Sun,
• Xian Zhang,
• Xiao Sun,
• Ni-Xian Qian,
• Min Wang and
• Yong-Qing Ma

Beilstein J. Nanotechnol. 2019, 10, 2116–2127, doi:10.3762/bjnano.10.206

• increase in the amount of •OH and •O2− radicals. Keywords: anatase; chemical state; degradation; photocatalytic properties; S-doping; thermal chemical vapor deposition; titanium dioxide (TiO2); Introduction Anatase TiO2 with a tetragonal symmetry has widely been used for the degradation of organic

Novel hollow titanium dioxide nanospheres with antimicrobial activity against resistant bacteria

• Carol López de Dicastillo,
• Cristian Patiño,
• María José Galotto,
• Yesseny Vásquez-Martínez,
• Claudia Torrent,
• Daniela Alburquenque,
• Alejandro Pereira and
• Juan Escrig

Beilstein J. Nanotechnol. 2019, 10, 1716–1725, doi:10.3762/bjnano.10.167

• -positive and Gram-negative bacteria [2]. In recent years, metal and metal oxide NPs, such as silver, gold, titanium and zinc oxide NPs, have been extensively studied due to their interesting antimicrobial character [3][4][5]. Titanium dioxide (TiO2) NPs have also attracted significant attention due to

BiOCl/TiO₂/diatomite composites with enhanced visible-light photocatalytic activity for the degradation of rhodamine B

• Minlin Ao,
• Kun Liu,
• Xuekun Tang,
• Zishun Li,
• Qian Peng and
• Jing Huang

Beilstein J. Nanotechnol. 2019, 10, 1412–1422, doi:10.3762/bjnano.10.139

• a carrier to support a layer of titanium dioxide (TiO2) nanoparticles and bismuth oxychloride (BiOCl) nanosheets. The results show that TiO2 nanoparticles and BiOCl nanosheets uniformly cover the surface of diatomite and bring TiO2 and BiOCl into close proximity. Rhodamine B was used as the target

• [10]. As one of the most promising photocatalysts, in terms of its chemical stability, non-toxicity, photo-corrosion resistance in aqueous media and advanced oxidation properties, titanium dioxide (TiO2) has been widely studied [11][12] and employed for water splitting [13], energy storage [14], and

Imaging the surface potential at the steps on the rutile TiO₂(110) surface by Kelvin probe force microscopy

• Masato Miyazaki,
• Huan Fei Wen,
• Quanzhen Zhang,
• Yuuki Adachi,
• Jan Brndiar,
• Ivan Štich,
• Yan Jun Li and
• Yasuhiro Sugawara

Beilstein J. Nanotechnol. 2019, 10, 1228–1236, doi:10.3762/bjnano.10.122

• steps in the catalytic reaction. Keywords: catalyst; Kelvin probe force microscopy; Smoluchowski effect; step; titanium dioxide; Introduction Titanium dioxide (TiO2) has attracted considerable interest for its promising applications as a photocatalyst and as catalyst support, as well as in gas sensors

Rapid, ultraviolet-induced, reversibly switchable wettability of superhydrophobic/superhydrophilic surfaces

• Yunlu Pan,
• Wenting Kong,
• Bharat Bhushan and
• Xuezeng Zhao

Beilstein J. Nanotechnol. 2019, 10, 866–873, doi:10.3762/bjnano.10.87

• chemicals Titanium dioxide (TiO2, rutile) with a diameter of ≈25 nm and aluminium dioxide (Al2O3) with a diameter of ≈30 nm were acquired from Shanghai Aladdin Bio-Chem Technology Corporation (Shanghai, China). 1H,1H,2H,2H-Perfluorooctyl(trimethoxy)silane (PFOS) was obtained from Shanghai Macklin

Graphene-enhanced metal oxide gas sensors at room temperature: a review

• Dongjin Sun,
• Yifan Luo,
• Marc Debliquy and
• Chao Zhang

Beilstein J. Nanotechnol. 2018, 9, 2832–2844, doi:10.3762/bjnano.9.264

• achieved at all [19][20]. Metal-oxide semiconductors (MOS), including tin oxide (SnO2), titanium dioxide (TiO2), zinc oxide (ZnO), copper oxide (CuO), tungsten oxide (WO3), indium oxide (In2O3), ferric oxide (Fe2O3) and cobalt oxide (Co3O4) are important materials for gas sensors [21][22][23][24][25][26

• dioxide (TiO2), as a wide-bandgap semiconductor, has been widely used as photocatalyst, and in solar cells and gas sensors [70][71][72]. In general, its operating temperature is over 200 °C, so scholars try to prepare composites with graphene to reduce its operating temperature. However, the stability of

• room-temperature sensor composed of a 3D graphene aerogel and SnO2 nanoparticles, synthesized via the method mentioned above, exhibited a higher response to NO2 and faster response/recovery times than a 2D SnO2–graphene sensor, fabricated by the same method without freeze-drying process. Titanium

Electrospun one-dimensional nanostructures: a new horizon for gas sensing materials

• Muhammad Imran,
• Nunzio Motta and
• Mahnaz Shafiei

Beilstein J. Nanotechnol. 2018, 9, 2128–2170, doi:10.3762/bjnano.9.202

• of electrospun metal oxide (MOx) semiconductors have been used for gas sensing applications. These semiconductors include titanium dioxide (TiO2) [93][94][95], tungsten trioxide (WO3) [27][96][97][98][99][100][101][102][103][104][105][106][107][108][109][110], copper oxide (CuO) [111], NiO [112

A scanning probe microscopy study of nanostructured TiO₂/poly(3-hexylthiophene) hybrid heterojunctions for photovoltaic applications

• Laurie Letertre,
• Roland Roche,
• Olivier Douhéret,
• Hailu G. Kassa,
• Denis Mariolle,
• Nicolas Chevalier,
• Łukasz Borowik,
• Philippe Dumas,
• Benjamin Grévin,
• Roberto Lazzaroni and
• Philippe Leclère

Beilstein J. Nanotechnol. 2018, 9, 2087–2096, doi:10.3762/bjnano.9.197

• the electron acceptor materials commonly used for DSSC and HBHJ, titanium dioxide (TiO2) is a well-known metal oxide semiconductor [6][7][8]. Depending on its nanostructure and its crystalline phase, its conductivity varies from 10−4 Ω−1·cm−1 to 10−11 Ω−1·cm−1 [9][10]. TiO2 is very valuable because it

Controllable one-pot synthesis of uniform colloidal TiO₂ particles in a mixed solvent solution for photocatalysis

• Jong Tae Moon,
• Seung Ki Lee and
• Ji Bong Joo

Beilstein J. Nanotechnol. 2018, 9, 1715–1727, doi:10.3762/bjnano.9.163

• Abstract This study reports on the controllable synthesis of uniform colloidal titanium dioxide (TiO2) particles and their photocatalytic applications toward rhodamine B (RhB) degradation. The monodispersed TiO2 particles were synthesized under mixed solvent conditions by sol–gel chemistry in a one-pot

• well as the crystalline properties and performance enhancement of TiO2 photocatalysts calcined at different temperatures. Keywords: mixed solvent; one-pot synthesis; photocatalysts; rhodamine B degradation; sol–gel synthesis; spherical TiO2 particles; Introduction Titanium dioxide (TiO2) is a widely

Sulfur-, nitrogen- and platinum-doped titania thin films with high catalytic efficiency under visible-light illumination

• Boštjan Žener,
• Lev Matoh,
• Giorgio Carraro,
• Bojan Miljević and
• Romana Cerc Korošec

Beilstein J. Nanotechnol. 2018, 9, 1629–1640, doi:10.3762/bjnano.9.155

• synthesis; thin films; titanium dioxide; visible-light illumination; Introduction In recent years, titanium dioxide (TiO2) has emerged as one of the most widely investigated semiconductors [1]. Due to its favorable properties (e.g., chemical and biological stability, nontoxicity and inexpensive price) it

Cr(VI) remediation from aqueous environment through modified-TiO₂-mediated photocatalytic reduction

• Rashmi Acharya,
• Brundabana Naik and
• Kulamani Parida

Beilstein J. Nanotechnol. 2018, 9, 1448–1470, doi:10.3762/bjnano.9.137

• of H2 is recognized as a green technology since it uses abundantly available water resources and inexhaustible solar energy. Therefore, substantial research in this field has been carried out since the pioneering work of Fujishima and Honda over titanium dioxide (TiO2) electrodes under irradiation of