Crystalline and amorphous structure selectivity of ignoble high-entropy alloy nanoparticles during laser ablation in organic liquids is set by pulse duration

• Robert Stuckert,
• Felix Pohl,
• Oleg Prymak,
• Ulrich Schürmann,
• Christoph Rehbock,
• Lorenz Kienle and
• Stephan Barcikowski

Beilstein J. Nanotechnol. 2025, 16, 1141–1159, doi:10.3762/bjnano.16.84

• solution; EELS; electron energy loss spectroscopy; laser processing in liquids; multicomponent alloy; STEM-EDX; selected area electron diffraction; X-ray diffraction; Introduction High-entropy alloys (HEAs), also referred to as compositionally complex solid solutions (CCSS) [1], are of great interest in

• approach for the synthesis of colloidal HEA NPs is magnetron sputtering, though special requirements such as vacuum stable solvents (e.g., ionic liquids) limit its widespread use [32] and scalability is limited. Colloidal NP products have several advantages. For instance, in the fabrication of

• colloids (LSPC) [41][42][43][44] provides nanoparticles dispersed in liquids without the addition of common additives (e.g., citrate [45], tensides [46], polymers [47]) or support material to stabilize the particles with high variability on the used solvent, yielding colloidal nanoparticles with

Fabrication of metal complex phthalocyanine and porphyrin nanoparticle aqueous colloids by pulsed laser fragmentation in liquid and their potential application to a photosensitizer for photodynamic therapy

• Taisei Himeda,
• Risako Kunitomi,
• Ryosuke Nabeya,
• Tamotsu Zako and
• Tsuyoshi Asahi

Beilstein J. Nanotechnol. 2025, 16, 1088–1096, doi:10.3762/bjnano.16.80

• fragmentation in liquids; reactive oxygen species generation; Introduction Porphyrins and phthalocyanines (Pcs), exhibiting intense absorption in the visible to near-infrared (NIR) regions, are well studied as photosensitizers in photodynamic therapy (PDT) [1]. Especially, Pcs absorb strongly light in the

• the activity of the target substance in general. An alternative and promising method for dispersing hydrophobic organic compounds as colloids is pulsed laser fragmentation in liquids (PLFL) [9][10]. This relatively new fabrication method has advantages because a microcrystalline sample powder

Time-resolved probing of laser-induced nanostructuring processes in liquids

• Maximilian Spellauge,
• David Redka,
• Mianzhen Mo,
• Changyong Song,
• Heinz Paul Huber and
• Anton Plech

Beilstein J. Nanotechnol. 2025, 16, 968–1002, doi:10.3762/bjnano.16.74

• Institute of Technology (KIT), Postfach 3640, D-76021 Karlsruhe, Germany 10.3762/bjnano.16.74 Abstract Laser synthesis and processing of colloids (LSPC) in liquids has gained widespread applications in producing nanomaterials of different classes of solids. While the technical processes in different cases

• . Ultrafast time-resolved probing approaches are key to revealing the transient states and pathways that govern material transformation in LSPC. Keywords: electron diffraction; laser processing in liquids; optical imaging; optical spectroscopy; pump–probe; single objects; time-resolved probing; X-ray

• reactions that span from atomic to macroscopic length scales. Consequently, it is paramount to understand the complex cascades that follow laser irradiation of condensed matter. Of particular importance here is the processing in the presence of liquids surrounding the irradiated material, but also

Insights into the electronic and atomic structures of cerium oxide-based ultrathin films and nanostructures using high-brilliance light sources

• Paola Luches and
• Federico Boscherini

Beilstein J. Nanotechnol. 2025, 16, 860–871, doi:10.3762/bjnano.16.65

• catalysts. In the soft X-ray range, the relatively high absorption of X-rays by gases or liquids at ambient pressure and the limited inelastic mean free path of secondary electrons, when total electron yield is used as a detection mode, put some constraints on the application of ambient pressure XAS in the

Synthesis and magnetic transitions of rare-earth-free Fe–Mn–Ni–Si-based compositionally complex alloys at bulk and nanoscale

• Shabbir Tahir,
• Tatiana Smoliarova,
• Carlos Doñate-Buendía,
• Michael Farle,
• Natalia Shkodich and
• Bilal Gökce

Beilstein J. Nanotechnol. 2025, 16, 823–836, doi:10.3762/bjnano.16.62

• available for producing CCA NPs, pulsed laser ablation in liquids (PLAL) stands out as a particularly promising method [41][42][43]. PLAL is a straightforward and versatile method that does not require expensive precursors, reducing agents, or surfactants [44][45]. The process is based on the laser

Morphology and properties of pyrite nanoparticles obtained by pulsed laser ablation in liquid and thin films for photodetection

• Akshana Parameswaran Sreekala,
• Bindu Krishnan,
• Rene Fabian Cienfuegos Pelaes,
• David Avellaneda Avellaneda,
• Josué Amílcar Aguilar-Martínez and
• Sadasivan Shaji

Beilstein J. Nanotechnol. 2025, 16, 785–805, doi:10.3762/bjnano.16.60

• of a magnetic field by laser ablation in liquids. SEM and TEM images of FeS2 nanoparticles prepared without a magnetic field revealed spherical particles with varying sizes, aggregation and agglomeration with an average size of approximately 40 nm [38]. In contrast to this, the average particle sizes

Efficiency of single-pulse laser fragmentation of organic nutraceutical dispersions in a circular jet flow-through reactor

• Tina Friedenauer,
• Maximilian Spellauge,
• Alexander Sommereyns,
• Verena Labenski,
• Tuba Esatbeyoglu,
• Christoph Rehbock,
• Heinz P. Huber and
• Stephan Barcikowski

Beilstein J. Nanotechnol. 2025, 16, 711–727, doi:10.3762/bjnano.16.55

• 30, Hannover 30167, Germany 10.3762/bjnano.16.55 Abstract Nutraceuticals provide health benefits and particularly profit from a sensitive, high-purity production process. Microparticle laser fragmentation in liquids is an emerging technique for the contamination-free comminution of organic drugs and

• laser fragmentation in liquids with ultrashort-pulsed lasers was studied in a circular jet reactor using curcumin and cannabidiol as model substances and single-pulse-per-volume element conditions to compare the fragmentation efficiency for these two nutraceuticals. Fragmentation efficiency based on the

• viability even at high curcumin concentrations. Keywords: antioxidant; cannabidiol; curcumin; drug; food additive; low degradation; nanoparticle; pulsed laser ablation in liquids; solubilization; Introduction Laser synthesis and processing of colloids (LSPC) has become increasingly popular over the last

A formulation containing Cymbopogon flexuosus essential oil: improvement of biochemical parameters and oxidative stress in diabetic rats

• Ailton Santos Sena-Júnior,
• Cleverton Nascimento Santana Andrade,
• Pedro Henrique Macedo Moura,
• Jocsã Hémany Cândido dos Santos,
• Cauãn Torres Trancoso,
• Eloia Emanuelly Dias Silva,
• Deise Maria Rego Rodrigues Silva,
• Ênio Pereira Telles,
• Luiz André Santos Silva,
• Isabella Lima Dantas Teles,
• Sara Fernanda Mota de Almeida,
• Daniel Alves de Souza,
• Jileno Ferreira Santos,
• Felipe José Aidar Martins,
• Ana Mara de Oliveira e Silva,
• Sandra Lauton-Santos,
• Guilherme Rodolfo Souza de Araujo,
• Cristiane Bani Correa,
• Rogéria De Souza Nunes,
• Lysandro Pinto Borges and
• Ana Amélia Moreira Lira

Beilstein J. Nanotechnol. 2025, 16, 617–636, doi:10.3762/bjnano.16.48

• -viscosity liquids. SMEDDSs are concentrated microemulsions that contain only the oil phase and the surfactant phase (without water). SMEDDSs can form MEs spontaneously through the addition of water and gentle agitation, such as movement of the gastrointestinal tract, and can be formulated into capsules [26

Polyurethane/silk fibroin-based electrospun membranes for wound healing and skin substitute applications

• Iqra Zainab,
• Zohra Naseem,
• Syeda Rubab Batool,
• Muhammad Waqas,
• Ahsan Nazir and
• Muhammad Anwaar Nazeer

Beilstein J. Nanotechnol. 2025, 16, 591–612, doi:10.3762/bjnano.16.46

• more effective wound-healing substitutes [50]. Recent advancements in tissue regeneration have further led to the development of innovative wound dressings such as hydrogels and electrospun scaffolds [51]. Electrospinning is an extremely flexible technique that can convert liquids, suspensions, or

Effect of additives on the synthesis efficiency of nanoparticles by laser-induced reduction

• Rikuto Kuroda,
• Takahiro Nakamura,
• Hideki Ina and
• Shuhei Shibata

Beilstein J. Nanotechnol. 2025, 16, 464–472, doi:10.3762/bjnano.16.35

• of chemical substances such as reducing agents and stabilizers that should be purified and removed after synthesis. In some cases, control of temperature and/or pressure are also required during reaction. In contrast, laser processing in liquids, which does not require chemical substances as reducing

Size control of nanoparticles synthesized by pulsed laser ablation in liquids using donut-shaped beams

• Abdel Rahman Altakroury,
• Oleksandr Gatsa,
• Farbod Riahi,
• Zongwen Fu,
• Miroslava Flimelová,
• Andrei Samokhvalov,
• Stephan Barcikowski,
• Carlos Doñate-Buendía,
• Alexander V. Bulgakov and
• Bilal Gökce

Beilstein J. Nanotechnol. 2025, 16, 407–417, doi:10.3762/bjnano.16.31

• GROC·UJI, Institute of New Imaging Technologies, Universitat Jaume I, Av. de Vicent Sos Baynat, s/n, 12071 Castellón, Spain 10.3762/bjnano.16.31 Abstract The potential to modify the size distribution of nanoparticles synthesized by pulsed laser ablation in liquids is demonstrated using a donut-shaped

• size can cause cellular damage or prevent membrane permeation for drug delivery [10]. Therefore, a fine and reproducible size control during NP synthesis is essential. Pulsed laser ablation in liquids (PLAL) allows for the synthesis of colloidal NPs offering numerous advantages, such as being

• ][26], ligands [27], and low-salinity ions [28], or by choosing different liquid media [29]. Nevertheless, the addition of molecular stabilizers or the use of liquids that increase the stability reduces the versatility of the technique and limits the applicability of the produced colloidal NPs. The

Pulsed laser in liquid grafting of gold nanoparticle–carbon support composites

• Madeleine K. Wilsey,
• Teona Taseska,
• Qishen Lyu,
• Connor P. Cox and
• Astrid M. Müller

Beilstein J. Nanotechnol. 2025, 16, 349–361, doi:10.3762/bjnano.16.26

• pulses in liquids has been reported [43]. A generation of similar concave edges occurs in twinning. Twinned gold nanoparticles have been found to exhibit enhanced electrocatalytic activity in reductions because of an increased number of undercoordinated surface sites [44]. XPS data corroborate the

• . The solution was stirred at 750 rpm. Dissolved reactant concentrations in the range from micromoles to a few moles have been used in pulsed laser in liquids synthesis [1]. An unfocused 532 nm, 8 ns pulsed laser beam from a 10 Hz Nd:YAG laser (Spectra-Physics Quanta-Ray LAB-190) with a pulse energy of

Preferential enrichment and extraction of laser-synthesized nanoparticles in organic phases

• Theo Fromme,
• Maximilian L. Spiekermann,
• Florian Lehmann,
• Stephan Barcikowski,
• Thomas Seidensticker and
• Sven Reichenberger

Beilstein J. Nanotechnol. 2025, 16, 254–263, doi:10.3762/bjnano.16.20

• Chemical Engineering, Laboratory for Industrial Chemistry, TU Dortmund University, Emil-Figge-Str. 66, 44227 Dortmund, Germany 10.3762/bjnano.16.20 Abstract Pulsed laser ablation in liquids (LAL) is an established preparation method of nanoparticles and catalysts, which additionally allows to chemically

• modify the nanomaterials in situ via chemical reactions of the nanoparticles with the molecules or solutes of the liquid. Particularly when organic solvents are used as liquids, photothermally induced C–C cleavage, addition or dehydrogenation reactions of the solvents, as well as (carbon

• in liquid; laser synthesis and processing of colloids; phase transfer; size separation; thermomorphic multiphase system; Introduction Laser ablation in liquids (LAL) provides nanoparticles without the need of external surfactants while retaining the initial composition of the educt material in the

A review of metal-organic frameworks and polymers in mixed matrix membranes for CO₂ capture

• Charlotte Skjold Qvist Christensen,
• Nicholas Hansen,
• Mahboubeh Motadayen,
• Nina Lock,
• Martin Lahn Henriksen and
• Jonathan Quinson

Beilstein J. Nanotechnol. 2025, 16, 155–186, doi:10.3762/bjnano.16.14

• functionalization, Figure 7c,d, reducing filler sizes, in situ MOF growth, or applying annealing treatments. Interfacial adhesion can also be improved using ionic liquids (Figure 7e). MOF functionalization is commonly employed in MMM research. For example, in the study by Katayama et al. [113] mentioned earlier

Fabrication of hafnium-based nanoparticles and nanostructures using picosecond laser ablation

• Abhishek Das,
• Mangababu Akkanaboina,
• Jagannath Rathod,
• R. Sai Prasad Goud,
• Kanaka Ravi Kumar,
• Raghu C. Reddy,
• Ratheesh Ravendran,
• Katia Vutova,
• S. V. S. Nageswara Rao and
• Venugopal Rao Soma

Beilstein J. Nanotechnol. 2024, 15, 1639–1653, doi:10.3762/bjnano.15.129

• insight into their morphological and optical characteristics paving way for their applications in future. Keywords: hafnium; laser ablation in liquids; nanofibres; nanoparticles; nanostructures; Introduction Hafnium (Hf) is a tetravalent transition metal with compounds showing excellent thermal and

• determines the electrical and optical properties, which can vary depending on the synthesis technique [19]. Among the methods mentioned above, laser ablation in liquids (LAL) is a clean and single-step synthesis method used for obtaining nanomaterials from a bulk source [11][16][17][18][20]. It produces NPs

• literature. In our earlier reports, HfO2 nanoparticles, nanoribbons, and nanofibres were synthesised by ablating HfO2 pellets utilising femtosecond laser pulses at 800 nm [10][30]. A bulk Hf target was also ablated in another work using nanosecond laser pulses in different liquids to synthesise oxides and

Effect of wavelength and liquid on formation of Ag, Au, Ag/Au nanoparticles via picosecond laser ablation and SERS-based detection of DMMP

• Sree Satya Bharati Moram,
• Chandu Byram and
• Venugopal Rao Soma

Beilstein J. Nanotechnol. 2024, 15, 1054–1069, doi:10.3762/bjnano.15.86

• parameter on NP productivity, shape, and size distribution remains an area of ongoing research [11][12][13][14][15]. Pulsed laser irradiation of liquids (PLIL) can affect the size and shape of NPs. Various approaches are described in the literature, such as (i) laser fragmentation in liquid (LFL), (ii

• Information File 1, Figures S1(a)–(c). It is believed that with increasing wavelength, the NP sizes increase, presumably due to the coexistence of both processes, such as laser ablation and laser fragmentation in liquids at lower wavelengths (i.e., higher energy). The SPR peak is shifted toward a longer

• while the laser wavelength was increased. Size reduction was observed when the aqueous NaCl solution was used as a surrounding medium instead of other liquids (DW). In this case, the size increases with an increasing wavelength. The diameters of colloids prepared at a laser wavelength of 1064 nm in DW

Beyond biomimicry – next generation applications of bioinspired adhesives from microfluidics to composites

• Dan Sameoto

Beilstein J. Nanotechnol. 2024, 15, 965–976, doi:10.3762/bjnano.15.79

• traditional microfluidics liquids like oil and water, another student in 2017 demonstrated its utility for integrating liquid metal electronics. Mersedeh Zandvakili showed in 2017 that eutectic gallium–indium could be injected into microfluidic channels, and the gecko pillars not only provided adhesion for

• functional in contact with these liquids and have enabled for a variety of flexible electronics applications. While the geckofluidics project was an example of a traditional application enhanced through the use of an improved bonding solution, the key to advancing the utility of biomimetic adhesives lies in

Electrospun nanofibers: building blocks for the repair of bone tissue

• Tuğrul Mert Serim,
• Gülin Amasya,
• Tuğba Eren-Böncü,
• Ceyda Tuba Şengel-Türk and
• Ayşe Nurten Özdemir

Beilstein J. Nanotechnol. 2024, 15, 941–953, doi:10.3762/bjnano.15.77

• to the healing process through their porous and flexible three-dimensional structure. They can increase the permeability of gases and liquids and reduce infection by bacteria because of their high filtration efficiency. Also, there is the great possibility of adding other functional moieties into the

• dielectric constant must be high enough [74][75]. With an increase in dielectric constant fewer beads and smaller fiber diameters are formed [80]. Environmental parameters Temperature Temperature affects the viscosity and spinnability of polymer liquids and the thickness of the collected fiber mats

Simultaneous electrochemical determination of uric acid and hypoxanthine at a TiO₂/graphene quantum dot-modified electrode

• Vu Ngoc Hoang,
• Dang Thi Ngoc Hoa,
• Nguyen Quang Man,
• Le Vu Truong Son,
• Le Van Thanh Son,
• Vo Thang Nguyen,
• Le Thi Hong Phong,
• Ly Hoang Diem,
• Kieu Chan Ly,
• Ho Sy Thang and
• Dinh Quang Khieu

Beilstein J. Nanotechnol. 2024, 15, 719–732, doi:10.3762/bjnano.15.60

• = 26°, corresponding to the (101) plane of the anatase phase (JCPDS file 73-1764) (Figure 2a). As the XRD measurements were made in liquids instead of solid powders, the diffraction peaks are found to be broad and weak. The diffraction peaks of the GQDs at 2θ = 30.4° can be assigned to the (002) plane

Laser synthesis of nanoparticles in organic solvents – products, reactions, and perspectives

• Theo Fromme,
• Sven Reichenberger,
• Katharine M. Tibbetts and
• Stephan Barcikowski

Beilstein J. Nanotechnol. 2024, 15, 638–663, doi:10.3762/bjnano.15.54

• , the corresponding reactions in organic liquids remain elusive, particularly because of the much greater complexity of carbon chemistry. To this end, this article first reviews the knowledge base of chemical reactions during LSPC and then deduces identifiable reaction pathways and mechanisms. This

• review also includes findings that are specific to the LSPC method variants laser ablation (LAL), fragmentation (LFL), melting (LML), and reduction (LRL) in organic liquids. A particular focus will be set on permanent gases, liquid hydrocarbons, and solid, carbonaceous species generated, including the

• mechanisms of organic liquid decomposition and carbon shell formation are highlighted and discussed regarding current challenges and future perspectives of LSPC using organic liquids instead of water. Keywords: alloy; photochemistry; pyrolysis; radicals; surface chemistry; Introduction Since the first

Development and characterization of potential larvicidal nanoemulsions against Aedes aegypti

• Jonatas L. Duarte,
• Leonardo Delello Di Filippo,
• Anna Eliza Maciel de Faria Mota Oliveira,
• Rafael Miguel Sábio,
• Gabriel Davi Marena,
• Tais Maria Bauab,
• Cristiane Duque,
• Vincent Corbel and
• Marlus Chorilli

Beilstein J. Nanotechnol. 2024, 15, 104–114, doi:10.3762/bjnano.15.10

• volatility, make their formulation a true challenge. In this regard, nanoemulsions (NEs), which are dispersions of two immiscible liquids with one of them dispersed as small droplets [11][12], stand out as new delivery vehicles for these bioactive compounds. They are especially important to enhance the water

Influence of conductive carbon and MnCo₂O₄ on morphological and electrical properties of hydrogels for electrochemical energy conversion

• Sylwia Pawłowska,
• Karolina Cysewska,
• Yasamin Ziai,
• Jakub Karczewski,
• Piotr Jasiński and
• Sebastian Molin

Beilstein J. Nanotechnol. 2024, 15, 57–70, doi:10.3762/bjnano.15.6

• porous structure is capable of swelling and thus accommodating large amounts of ionic liquids. Moreover, the swollen hydrogel structure provides constant access of electrolyte molecules/ions to the catalyst particles, increasing the speed and efficiency of the electrochemical reaction [20]. The swelling

• large as possible. The porous microstructure of the hydrogel matrix is capable of swelling and thus accommodating significant amounts of ionic liquids. Such a structure provides constant access of the electrolyte molecules/ions to the catalyst particles surrounding it, increasing the speed and

A combined gas-phase dissociative ionization, dissociative electron attachment and deposition study on the potential FEBID precursor [Au(CH₃)₂Cl]₂

• Elif Bilgilisoy,
• Ali Kamali,
• Thomas Xaver Gentner,
• Gerd Ballmann,
• Sjoerd Harder,
• Hans-Peter Steinrück,
• Hubertus Marbach and
• Oddur Ingólfsson

Beilstein J. Nanotechnol. 2023, 14, 1178–1199, doi:10.3762/bjnano.14.98

Low temperature atomic layer deposition of cobalt using dicobalt hexacarbonyl-1-heptyne as precursor

• Mathias Franz,
• Mahnaz Safian Jouzdani,
• Lysann Kaßner,
• Marcus Daniel,
• Frank Stahr and
• Stefan E. Schulz

Beilstein J. Nanotechnol. 2023, 14, 951–963, doi:10.3762/bjnano.14.78

•  1. The reactor is designed to offer a wide variability as it consists of two bubblers, two Vapbox evaporators (Kemstream SAS), and two CEM systems (Bronkhorst High-Tech B.V.) for precursor delivery. In that way, one can evaporate liquids with high and low vapour pressure, as well as solids in

Humidity-dependent electrical performance of CuO nanowire networks studied by electrochemical impedance spectroscopy

• Jelena Kosmaca,
• Juris Katkevics,
• Jana Andzane,
• Raitis Sondors,
• Liga Jasulaneca,
• Raimonds Meija,
• Kiryl Niherysh,
• Yelyzaveta Rublova and
• Donats Erts

Beilstein J. Nanotechnol. 2023, 14, 683–691, doi:10.3762/bjnano.14.54

• , e.g., RH 73% and 95%, Figure 2a). A small tail at low frequencies (RH 95%, Figure 2a inset) corresponds to the appearance of a Warburg element W in the equivalent circuit (Figure 2b), which may be attributed to diffusion processes from liquids at high humidity. The values of impedance magnitude and