A TiO₂@MWCNTs nanocomposite photoanode for solar-driven water splitting

• Anh Quynh Huu Le,
• Ngoc Nhu Thi Nguyen,
• Hai Duy Tran,
• Van-Huy Nguyen and
• Le-Hai Tran

Beilstein J. Nanotechnol. 2022, 13, 1520–1530, doi:10.3762/bjnano.13.125

• -603103, Tamil Nadu, India 10.3762/bjnano.13.125 Abstract A TiO2@MWCNTs (multi-wall carbon nanotubes) nanocomposite photoanode is prepared for photoelectrochemical water splitting in this study. The physical and photoelectrochemical properties of the photoanode are characterized using field emission

• -scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and linear sweep voltammetry. The results show that the TiO2@MWCNTs nanocomposite has an optical bandgap of 2.5 eV, which is a significant improvement in visible-light absorption capability compared to TiO2 (3.14 eV). The

• cyclic voltammograms show that incorporating TiO2 with the MWCNTs leads to a decrease in the electrical double layer, thereby facilitating the electron transfer rate in the TiO2@MWCNTs electrode. Moreover, the current density of the photoelectrochemical electrode formed by TiO2@MWCNTs under solar

Near-infrared photoactive Ag-Zn-Ga-S-Se quantum dots for high-performance quantum dot-sensitized solar cells

• Roopakala Kottayi,
• Ilangovan Veerappan and
• Ramadasse Sittaramane

Beilstein J. Nanotechnol. 2022, 13, 1337–1344, doi:10.3762/bjnano.13.110

• [4][5][6][7]. At present, QDSCs have reached 14.4% efficiency. In QDSCs, QDs are added to the metal oxides. Our earlier reports demonstrated that porous TiO2 nanofibers possess an enormous surface area for the maximum absorption of QDs [8][9][10]. For the past decades, binary or ternary QDs based on

• sensitizers to fabricate QDSCs. The QDSC constructed by using AZGSSe QD-sensitized TiO2 nanofibers (AZGSSe/TiO2) as the photoanode showed a PCE of 4.91%. Experimental Materials Silver(I) chloride (AgCl), selenium powder (Se), mercaptopropionic acid (MPA), zinc(II) chloride (ZnCl2), gallium(III) chloride

• min and quickly poured into cold methanol to form AZGSSe QDs. After purification purification via centrifugation, the QDs were dispersed in 5 mL chloroform. Preparation of a AZGSSe QD-sensitized TiO2 NF-based photoanode A pre-prepared TiO2 nanofiber (NF) paste was coated on FTO glass via the doctor

Recent trends in Bi-based nanomaterials: challenges, fabrication, enhancement techniques, and environmental applications

• Vishal Dutta,
• Ankush Chauhan,
• Ritesh Verma,
• C. Gopalkrishnan and
• Van-Huy Nguyen

Beilstein J. Nanotechnol. 2022, 13, 1316–1336, doi:10.3762/bjnano.13.109

• environmentally beneficial alternatives [7]. The choice of the photocatalysts is one of the most important steps in attaining high performance in photocatalysis. Semiconductors with bandgaps greater than 3 eV are called wide-bandgap photocatalysts. These semiconductors include oxides (e.g., TiO2, Bi2O3, Bi2WO6

• are just van der Waals forces, which are weak [46]. Metal oxides such as TiO2 only have the O 2p orbital in their VB. In contrast , Bi-based oxide materials have an electronic structure in which O 2p and Bi 6s orbitals are paired in the VB. The bandgap of the semiconductor may be reduced to 3.0 eV

• photocatalysts in such a way as to change the processes involved in photocatalytic reaction kinetics. For example, Cao et al. reported the fabrication of a bismuth-based Bi/Bi2MoO6/TiO2 nanocomposite photocatalytic material using a facile one-step solvothermal technique [114]. To reduce metal Bi on the surface

Role of titanium and organic precursors in molecular layer deposition of “titanicone” hybrid materials

• Arbresha Muriqi and
• Michael Nolan

Beilstein J. Nanotechnol. 2022, 13, 1240–1255, doi:10.3762/bjnano.13.103

• initial MLD reactions in titanicone film growth using three different surface models: anatase TiO2, rutile TiO2 and Al2O3. Calculated energetics show that while TiCl4 is reactive towards the anatase and rutile TiO2 surfaces, it is not reactive towards the Al2O3 surface. Ti(DMA)4 is reactive towards all

• prefer the flat lying configuration on all surfaces. This work shows that the choice of the surface and the metallic precursor has a major impact on the behaviour of organic species. DFT findings provide motivation to develop a low temperature rutile TiO2/titanicone film suggesting that the desired film

• widely used in ALD for the deposition of TiO2 and TiN films by thermal and plasma-enhanced processes [35][36]. As described above, TiCl4 and Ti(DMA)4 were successfully employed in MLD of titanicone films [30][33]. While TiCl4 is a small halide molecule that has Ti–Cl bonds, Ti(DMA)4 is a bulkier molecule

A super-oscillatory step-zoom metalens for visible light

• Yi Zhou,
• Chao Yan,
• Peng Tian,
• Zhu Li,
• Yu He,
• Bin Fan,
• Zhiyong Wang,
• Yao Deng and
• Dongliang Tang

Beilstein J. Nanotechnol. 2022, 13, 1220–1227, doi:10.3762/bjnano.13.101

• positions of the super-oscillation phase are 0.15, 0.2 and 0.4, respectively. The phase modulation of the super-oscillatory step-zoom metalens can be divided in two parts, namely focusing phase and super-oscillatory phase. Phase modulation is achieved by TiO2 nanopillars based on the geometric phase, which

• potential applications in the field of super-resolution microscopic imaging and optical precision machining. The layout of the double-layer step-zoom metalens. Phase profiles of the front and rear metasurfaces for (a) short and (b) long focal lengths. (a) Schematic of a TiO2 rectangular nanopillar. (b

Design of surface nanostructures for chirality sensing based on quartz crystal microbalance

• Yinglin Ma,
• Xiangyun Xiao and
• Qingmin Ji

Beilstein J. Nanotechnol. 2022, 13, 1201–1219, doi:10.3762/bjnano.13.100

• -TiO2 nanofibers by using N-stearoyl- ʟ/ᴅ-glutamic acid (C18-ʟ/ᴅ-Glu) lipid as the chiral template and titanium diisopropoxide bis(acetylacetonate) as the titanium source based on a sol–gel process [119]. The average length and width of the TiO2 nanofiber were ca. 200 and 30 nm, respectively. The

• resultant L- or R-TiO2 nanofibers were immobilized as recognition layers on the QCM electrode for selective adsorption of chiral peptides. The insulin monomers exhibited a higher tendency to bind to the R-surface than to the L-surface. The recognition difference was suggested mainly due to the steric effect

• between the interaction of the amino acid residues of insulin and the O− and OH2+ groups on TiO2. The helical arrangement of the nanoscale lattice planes of TiO2 in the R-surface may provide a right-handed helical structure, leading to strong interaction with the insulin monomer. The R-surface thus can

Application of nanoarchitectonics in moist-electric generation

• Jia-Cheng Feng and
• Hong Xia

Beilstein J. Nanotechnol. 2022, 13, 1185–1200, doi:10.3762/bjnano.13.99

• can be easily grown on substrates to form nanoscale networks and perform well in MEGs due to their unique electron transport properties [2][47][48]. This includes Al2O3 [49], MoS2 [50][51], Ni–Al layered double hydroxide (LDH) [52], MoS2/SiO2 composites [53], TiO2 [54], and Ti3C2Tx MXene nanosheets

• maximum Voc of 0.6 V and an Isc of 0.3 μA (Figure 4b,c). TiO2 nanowires provided an open-circuit voltage of 0.5 V and microampere-level short-circuit currents through a rich 3D nanoscale network. In a Ti3C2Tx MXene nanosheet generator, the wicking rates of the samples after sonication were increased, and

• is the highest instantaneous current measured in nanomaterial MEG devices. Moreover, the preparation method of metal compound nanomaterials is mature, and different morphologies can be obtained, such as nanoparticles of Al2O3, nanowires of TiO2, Ni–Al layered structures, and nanosheets of MXene

Rapid fabrication of MgO@g-C₃N₄ heterojunctions for photocatalytic nitric oxide removal

• Minh-Thuan Pham,
• Duyen P. H. Tran,
• Xuan-Thanh Bui and
• Sheng-Jie You

Beilstein J. Nanotechnol. 2022, 13, 1141–1154, doi:10.3762/bjnano.13.96

• redox potential by coupling two or more semiconductors [23][24], such as Bi2MoO6-based [25][26][27][28][29], BiOCl-based [30][31], g-C3N4-based [32][33][34], ZnO-based [35][36][37], TiO2-based [38][39], and MgO-based heterostructured photocatalysts [40]. Among these, the combination of MgO and g-C3N4

Green synthesis of zinc oxide nanoparticles toward highly efficient photocatalysis and antibacterial application

• Vo Thi Thu Nhu,
• Nguyen Duy Dat,
• Le-Minh Tam and
• Nguyen Hoang Phuong

Beilstein J. Nanotechnol. 2022, 13, 1108–1119, doi:10.3762/bjnano.13.94

• approach for the complete removal of organic pollutants due to their advantages. Semiconductors can act as catalysts for the complete degradation of organic substances when excited by light with an energy value higher than their bandgap. Among many semiconductors, TiO2 and ZnO are widely used as

• photocatalysts. ZnO has a higher quantum efficiency than that of TiO2 since it absorbs more energy in the UV region [4][5][6][7]. Furthermore, ZnO is a low-cost photocatalyst with high photocatalytic activity, nontoxicity, light sensitivity, and stability [8][9][10]. The photodegradation of organic substances by

Recent advances in green carbon dots (2015–2022): synthesis, metal ion sensing, and biological applications

• Aisha Kanwal,
• Naheed Bibi,
• Sajjad Hyder,
• Arif Muhammad,
• Hao Ren,
• Jiangtao Liu and
• Zhongli Lei

Beilstein J. Nanotechnol. 2022, 13, 1068–1107, doi:10.3762/bjnano.13.93

• to have excellent biocompatibility with cells [70]. Ramanarayanan and Swaminathan utilized guava leaves to prepare CDs, which were then utilized for the synthesis of a CD-TiO2 nanocomposite. The CD-TiO2 nanocomposite possesses good photocatalytic ability to degrade methylene blue dye [71]. White

Biomimetic chitosan with biocomposite nanomaterials for bone tissue repair and regeneration

• Se-Kwon Kim,
• Sesha Subramanian Murugan,
• Pandurang Appana Dalavi,
• Sebanti Gupta,
• Sukumaran Anil,
• Gi Hun Seong and
• Jayachandran Venkatesan

Beilstein J. Nanotechnol. 2022, 13, 1051–1067, doi:10.3762/bjnano.13.92

• fluids [117][118]. A recent study has proven that synthetic changes made to the surface of titanium oxide (TiO2) nanotubes can influence their characteristics, substantially impacting cell contacts and antibacterial activity. As a result, antibiotic drugs combined with a surface-modified TiO2-based drug

• delivery system in synthetic bone implants can stimulate bone regeneration while preventing bacterial infection. Furthermore, coating materials containing TiO2 can help drug stabilisation producing a long-term drug release profile [119]. The electrochemical anodization process was used by Lai et al. (2018

• ) to create TiO2 nanotubes. Naringin was also dropped directly into TiO2 nanotubes, which were then subsequently covered with chitosan layers. There was a long-term release of naringin from the system. In vitro biological tests on osteoblasts revealed that the cells were viable and alkaline phosphatase

Spindle-like MIL101(Fe) decorated with Bi₂O₃ nanoparticles for enhanced degradation of chlortetracycline under visible-light irradiation

• Chen-chen Hao,
• Fang-yan Chen,
• Kun Bian,
• Yu-bin Tang and
• Wei-long Shi

Beilstein J. Nanotechnol. 2022, 13, 1038–1050, doi:10.3762/bjnano.13.91

• photogenerated charges and resultant photocatalytic activity [26]. Up to date, a few semiconductors such as ZnO [39], TiO2 [19] and g-C3N4 [40] have been employed to construct heterojunctions with MIL101(Fe). The abovementioned MIL101-based heterojunctions are all traditional heterojunctions which promote the

Effects of focused electron beam irradiation parameters on direct nanostructure formation on Ag surfaces

• Jānis Sniķeris,
• Vjačeslavs Gerbreders,
• Andrejs Bulanovs and
• Ēriks Sļedevskis

Beilstein J. Nanotechnol. 2022, 13, 1004–1010, doi:10.3762/bjnano.13.87

• LiAlSi glasses [28] and TiO2 [29]. In one of our previous studies [30] we investigated the growth dynamics of nanodots on various metal surfaces (Al, Ag, Cu, Cr, and Mo) under focused EB irradiation in an SEM vacuum chamber. Similar to the previously discussed study, an influence of the surface material

Recent advances in nanoarchitectures of monocrystalline coordination polymers through confined assembly

• Lingling Xia,
• Qinyue Wang and
• Ming Hu

Beilstein J. Nanotechnol. 2022, 13, 763–777, doi:10.3762/bjnano.13.67

• ., published by Elsevier, distributed under the terms of the Creative Commons Attribution 4.0 International License, https://creativecommons.org/licenses/by/4.0). Schematic illustrations and SEM images of Prussian blue single crystals encapsulating various kinds of networks: (a) TiO2 networks, (b) reduced

Hierarchical Bi₂WO₆/TiO₂-nanotube composites derived from natural cellulose for visible-light photocatalytic treatment of pollutants

• Zehao Lin,
• Zhan Yang and
• Jianguo Huang

Beilstein J. Nanotechnol. 2022, 13, 745–762, doi:10.3762/bjnano.13.66

• Zehao Lin Zhan Yang Jianguo Huang Department of Chemistry, Zhejiang University, Hangzhou, Zhejiang 310027, P. R. China Shenzhen Middle School, Shenzhen, Guangdong 518001, P. R. China 10.3762/bjnano.13.66 Abstract A series of Bi2WO6/TiO2-nanotube (Bi2WO6/TiO2-NT) heterostructured composites were

• prepared by utilizing natural cellulose (e.g., laboratory filter paper) as the structural template. The obtained nanoarchitectonics, namely Bi2WO6/TiO2-NT nanocomposites, displayed three-dimensionally interwoven structures which replicated the initial cellulose template. The composite Bi2WO6/TiO2-NT

• nanotubes were formed by TiO2 nanotubes that uniformly anchored with Bi2WO6 nanoparticles of various densities on the surface. The composites exhibited improved photocatalytic activities toward the reduction of Cr(VI) and degradation of rhodamine B under visible light (λ > 420 nm), which were attributed to

A nonenzymatic reduced graphene oxide-based nanosensor for parathion

• Sarani Sen,
• Anurag Roy,
• Ambarish Sanyal and
• Parukuttyamma Sujatha Devi

Beilstein J. Nanotechnol. 2022, 13, 730–744, doi:10.3762/bjnano.13.65

• nanoribbons doped with silver nanoparticles, rGO doped with ZrO2, and CuO–TiO2 hybrid nanocomposites were proposed to detect methyl parathion [19][20][21][22]. Rajaji et al. (2019) modified glassy carbon electrodes with graphene oxide encapsulated 3D porous chalcopyrite (CuFeS2) nanocomposites to detect

Direct measurement of surface photovoltage by AC bias Kelvin probe force microscopy

• Masato Miyazaki,
• Yasuhiro Sugawara and
• Yan Jun Li

Beilstein J. Nanotechnol. 2022, 13, 712–720, doi:10.3762/bjnano.13.63

• . The tip was cleaned by Ar+ sputtering (0.8 keV, 5 × 10−7 Torr, 5 min) to remove the contaminants and the native oxide layer. We used a rutile TiO2(110) sample to demonstrate the AC-KPFM. TiO2 is one of the promising photocatalytic materials [38][39][40] and has been widely studied using AFM and KPFM

• [41][42][43][44]. Rutile TiO2 has a bandgap of 3.0 eV [45] and shows the SPV under UV illumination [46][47][48]. A clean rutile TiO2(110) surface (Crystal Base) was prepared by several cycles of Ar+ sputtering (1 keV, 1 × 10−6 Torr, 15 min) and annealing (993 K, less than 2 × 10−10 Torr, 30 min

• disappeared in the spectrum of Δf (Figure 2b). Here, we cannot determine the polarity of the SPV because the phase for the lock-in amplifier was adjusted to maximize the absolute value of the demodulated output. We note that the response time of SPV on the rutile TiO2(110) surface is intrinsically

Sodium doping in brookite TiO₂ enhances its photocatalytic activity

• Boxiang Zhuang,
• Honglong Shi,
• Honglei Zhang and
• Zeqian Zhang

Beilstein J. Nanotechnol. 2022, 13, 599–609, doi:10.3762/bjnano.13.52

• Boxiang Zhuang Honglong Shi Honglei Zhang Zeqian Zhang School of Science, Minzu University of China, 27 Zhong guancun South Avenue, Haidian District, Beijing, 100081, People's Republic of China 10.3762/bjnano.13.52 Abstract We report in this work that sodium doping of brookite TiO2 effectively

• enhances its photocatalytic activity, which becomes three times higher than that of the quasi-spherical brookite TiO2. The results demonstrated that the sodium-doped brookite NaxTi1−xO2 can be stable up to 500 °C. At 600°C, the sodium in the brookite precipitates in the form of Na2CO3, and above 700 °C

• ; Introduction Titanium dioxide (TiO2) has been extensively studied for many potential applications in the environmental and energy fields, such as treatment of polluted water [1][2], air purification [3][4], and water splitting [5][6]. In recent years, the interest in the brookite phase of TiO2 has been

Influence of thickness and morphology of MoS₂ on the performance of counter electrodes in dye-sensitized solar cells

• Lam Thuy Thi Mai,
• Hai Viet Le,
• Ngan Kim Thi Nguyen,
• Van La Tran Pham,
• Thu Anh Thi Nguyen,
• Nguyen Thanh Le Huynh and
• Hoang Thai Nguyen

Beilstein J. Nanotechnol. 2022, 13, 528–537, doi:10.3762/bjnano.13.44

• and respectable efficiency [1]. This promising third generation of solar cells contains a dye-adsorbed TiO2 photoanode, an iodide/triiodide electrolyte, and a platinum-based cathode, also known as the counter electrode (CE). However, the high cost of platinum has prevented the real-world application of

• is associated with the reduction of I3− at the cathode (CE/electrolyte), while the second one in the low-frequency region is attributed to electron transport in the TiO2 film in the back reaction at the TiO2/electrolyte interface (TiO2/dye/electrolyte). EIS data were fitted using an equivalent

• -circuit model including the series resistances of electrolyte and FTO substrate (Rs) and the charge-transfer resistances on the CE/electrolyte and TiO2/dye/electrolyte interfaces (Rct1 and Rct2) associated with the corresponding constant phase elements (CPE1 and CPE2) as described in Figure 6 (Figure 6

Zinc oxide nanostructures for fluorescence and Raman signal enhancement: a review

• Ioana Marica,
• Fran Nekvapil,
• Maria Ștefan,
• Cosmin Farcău and
• Alexandra Falamaș

Beilstein J. Nanotechnol. 2022, 13, 472–490, doi:10.3762/bjnano.13.40

• shapes used for SERS applications, as well as spherical ZnO nanoparticles [8] are given in Figure 1. Combination of ZnO nanostructures with noble metals The use of inexpensive semiconducting materials, such as wide-bandgap ZnO or TiO2, for SPR-based substrates has gained increased attention in recent

• similar conclusion with 3% doping of TiO2 NPs with Zn, using 4-MBA as analyte. Fluorescence applications of ZnO-based nanostructures Photoluminescence enhancement of ZnO nanostructures ZnO nanomaterials present a wide bandgap of (3.3–3.7 eV) and a high excitation binding energy of 60 meV, which gives them

A non-enzymatic electrochemical hydrogen peroxide sensor based on copper oxide nanostructures

• Irena Mihailova,
• Vjaceslavs Gerbreders,
• Marina Krasovska,
• Eriks Sledevskis,
• Valdis Mizers,
• Andrejs Bulanovs and
• Andrejs Ogurcovs

Beilstein J. Nanotechnol. 2022, 13, 424–436, doi:10.3762/bjnano.13.35

• ., Co2O3, TiO2, NiO, and Fe2O3). SEM images of copper oxide samples. (a, b) General view and morphology of a CuO film obtained by thermal oxidation on a copper wire; (c, d) general view of a copper wire with CuO layer obtained by chemical hydrothermal oxidation; (e) 3D flower-like nanostructured formations

A chemiresistive sensor array based on polyaniline nanocomposites and machine learning classification

• Jiri Kroutil,
• Alexandr Laposa,
• Ali Ahmad,
• Jan Voves,
• Vojtech Povolny,
• Ladislav Klimsa,
• Marina Davydova and
• Miroslav Husak

Beilstein J. Nanotechnol. 2022, 13, 411–423, doi:10.3762/bjnano.13.34

• (carbon nanotubes (CNT), SnO2, TiO2) materials in a gas sensors based on nanocomposite layers with good sensitivity, temperature stability, reversibility, which was operating at room temperature. Herein, we extended our study by applying other nanocomposite sensing layers, namely PANI/ZnO, PANI/WO3

Micro- and nanotechnology in biomedical engineering for cartilage tissue regeneration in osteoarthritis

• Zahra Nabizadeh,
• Mahmoud Nasrollahzadeh,
• Hamed Daemi,
• Mohamadreza Baghaban Eslaminejad,
• Ali Akbar Shabani,
• Mehdi Dadashpour,
• Majid Mirmohammadkhani and
• Davood Nasrabadi

Beilstein J. Nanotechnol. 2022, 13, 363–389, doi:10.3762/bjnano.13.31

• (TiO2) nanotubes have recently attracted widespread attention in the biomedical field due to the great biocompatibility, large specific surface area, and the provision of an inner space capable of being filled with drugs and bioactive molecules [139][140]. Recently, TiO2 nanotubes have been introduced

• as potential candidates for bone TE due to osteoblast attachment and corrosion resistance [141]. Wan et al. used bacterial cellulose as a template to synthesize calcined mesoporous TiO2 nanotubes and constructed a nanotube-based scaffold using a template-assisted sol–gel method [142]. In addition to

• enhancing the ALP activity and mineralization, the scaffold showed improved cell proliferation. Khoshroo et al. fabricated a 3D PCL/TiO2 sintered microsphere scaffold, which improved the mechanical and biological properties for bone TE purposes [143]. Moreover, the results showed that the presence of TiO2

Investigation of a memory effect in a Au/(Ti–Cu)Ox-gradient thin film/TiAlV structure

• Damian Wojcieszak,
• Jarosław Domaradzki,
• Michał Mazur,
• Tomasz Kotwica and
• Danuta Kaczmarek

Beilstein J. Nanotechnol. 2022, 13, 265–273, doi:10.3762/bjnano.13.21

• ]. The most commonly used material in resistive switching devices is TiO2−x [33][34][35][36][37][38]. In addition to the oxide layers, the material used for metal electrodes plays another crucial role in the resistive switching mechanism. Usually, materials such as Au, Ag, Ni, Ti, W, TiN, or ITO are used

• conductivity of the prepared gradient thin film. The p-type of electrical conduction is often reported for Cu2O (or CuO)-based thin films, while TiO2 is an n-type oxide [46][47]. In the case of the prepared mixed (Ti–Cu)Ox thin film, the result obtained clearly testifies that holes are the major charge

• oxidation state +4 of titanium present at the surface. The ratio between the areas of the Ti 2p3/2 and Ti 2p1/2 peaks is equal to 2:1, which confirms the presence of stoichiometric TiO2 at the surface of (Ti0.48Cu0.52)Ox thin film. Furthermore, the O 1s spectrum (Figure 6c) was deconvoluted into three peaks

Engineered titania nanomaterials in advanced clinical applications

• Padmavati Sahare,
• Paulina Govea Alvarez,
• Juan Manual Sanchez Yanez,
• Gabriel Luna-Bárcenas,
• Samik Chakraborty,
• Sujay Paul and
• Miriam Estevez

Beilstein J. Nanotechnol. 2022, 13, 201–218, doi:10.3762/bjnano.13.15

• systems for theranostic purposes. Titanium dioxide (titanium(IV) oxide/titania/TiO2) has garnered considerable attention as one of the most extensively studied metal oxides in clinical applications. Owing to the unique properties of titania, such as photocatalytic activity, excellent biocompatibility

• review aims to present a comprehensive and up-to-date overview of TiO2-based nanotherapeutics and the corresponding future challenges. Keywords: clinical application; nanostructures; physicochemical; theranostics; titanium dioxide (TiO2); Introduction Nanomaterials can be described as any organic

• that they can circulate freely through the circulatory system and can penetrate tissues. Recently, TiO2 has received substantial recognition as one of the most extensively studied inorganic metal oxides in clinical research due to its unique nanosized features, intrinsic properties, biocompatibility