Non-agglomerated silicon–organic nanoparticles and their nanocomplexes with oligonucleotides: synthesis and properties

• Asya S. Levina,
• Marina N. Repkova,
• Nadezhda V. Shikina,
• Zinfer R. Ismagilov,
• Svetlana A. Yashnik,
• Dmitrii V. Semenov,
• Yulia I. Savinovskaya,
• Natalia A. Mazurkova,
• Inna A. Pyshnaya and
• Valentina F. Zarytova

Beilstein J. Nanotechnol. 2018, 9, 2516–2525, doi:10.3762/bjnano.9.234

• known to degrade to orthosilicic acid, Si(OH)4, which is found in almost all human tissues and effectively excreted through the urine [9]. Organically modified silica nanoparticles are known for their low toxicity and biocompatibility and can be used for targeted imaging and therapy [10][11]. The

Enhanced antineoplastic/therapeutic efficacy using 5-fluorouracil-loaded calcium phosphate nanoparticles

• Shanid Mohiyuddin,
• Saba Naqvi and
• Gopinath Packirisamy

Beilstein J. Nanotechnol. 2018, 9, 2499–2515, doi:10.3762/bjnano.9.233

• drug. This might be due to the mechanistic action of p-glycoprotein-mediated discharging [40] of the drug at the onset of the saturation concentration. To substantiate the biocompatibility of the nanoparticles, we extended the MTT assay to HEK-293 cells. The results obtained in this study indicate that

• . Characteristic features such as high biocompatibility, bioavailability and pH-triggered behaviour, highlight the great potential of calcium phosphate nanoparticles as carriers for biomedical applications. Moreover, the low cost, highly reproducible microemulsion synthetic procedure further enhances the

Nanoconjugates of a calixresorcinarene derivative with methoxy poly(ethylene glycol) fragments for drug encapsulation

• Alina M. Ermakova,
• Julia E. Morozova,
• Yana V. Shalaeva,
• Victor V. Syakaev,
• Aidar T. Gubaidullin,
• Alexandra D. Voloshina,
• Vladimir V. Zobov,
• Irek R. Nizameev,
• Olga B. Bazanova,
• Igor S. Antipin and
• Alexander I. Konovalov

Beilstein J. Nanotechnol. 2018, 9, 2057–2070, doi:10.3762/bjnano.9.195

• toxicity that have sizes of ≤100 nm, increase biocompatibility, stability and circulation time of the drugs, and are sensitive to release stimuli. Nanocontainers on the base of amphiphilic compounds combine these properties and are able to increase the solubility of hydrophobic drugs due to their binding

Fabrication of photothermally active poly(vinyl alcohol) films with gold nanostars for antibacterial applications

• Mykola Borzenkov,
• Maria Moros,
• Claudia Tortiglione,
• Serena Bertoldi,
• Nicola Contessi,
• Silvia Faré,
• Angelo Taglietti,
• Agnese D’Agostino,
• Piersandro Pallavicini,
• Maddalena Collini and
• Giuseppe Chirico

Beilstein J. Nanotechnol. 2018, 9, 2040–2048, doi:10.3762/bjnano.9.193

• higher temperatures (ΔT > 40 °C) in the latter case [3][8][9][10]. Poly(vinyl alcohol) (PVA) polymer is also an attractive material for GNS-based film fabrication, as it displays a range of useful properties, namely, low toxicity, biocompatibility, hydrophilicity, chemical stability, and excellent film

Biomimetic and biodegradable cellulose acetate scaffolds loaded with dexamethasone for bone implants

• Aikaterini-Rafailia Tsiapla,
• Varvara Karagkiozaki,
• Veroniki Bakola,
• Foteini Pappa,
• Panagiota Gkertsiou,
• Eleni Pavlidou and
• Stergios Logothetidis

Beilstein J. Nanotechnol. 2018, 9, 1986–1994, doi:10.3762/bjnano.9.189

• are placed as coatings in medical devices in order to enhance the biocompatibility [2][3][4]. One technique to produce such coatings is electrospinning, which yields long micro- and nanofibers [5]. More specifically, physical and synthetic polymeric fibers of 30–20000 nm in length are produced by

Atomic-level characterization and cilostazol affinity of poly(lactic acid) nanoparticles conjugated with differentially charged hydrophilic molecules

• María Francisca Matus,
• Martín Ludueña,
• Cristian Vilos,
• Iván Palomo and
• Marcelo M. Mariscal

Beilstein J. Nanotechnol. 2018, 9, 1328–1338, doi:10.3762/bjnano.9.126

• many other nanosystems concerning their biodegradation, biocompatibility and highly modifiable physical and mechanical properties [1][4][5][6]. Polymeric materials also have demonstrated superior efficacy to deliver therapeutic agents at the site of the disease or damaged area and protecting drugs

• have shown that PEGylation of NPs allows improved blood circulation, clearance, biocompatibility and less cytotoxicity [15][16][17][18][19]. Hydrophilic polymer chains at the surface of NPs act as a steric barrier, reducing the opsonization and the subsequent phagocytosis [20][21][22]. This amphiphilic

Review on nanoparticles and nanostructured materials: history, sources, toxicity and regulations

• Jaison Jeevanandam,
• Ahmed Barhoum,
• Yen S. Chan,
• Alain Dufresne and
• Michael K. Danquah

Beilstein J. Nanotechnol. 2018, 9, 1050–1074, doi:10.3762/bjnano.9.98

• protein capsids were used to encapsulate drugs, genes, enzymes or proteins for targeted delivery with biocompatibility and bioavailability [128]. Recent research efforts have focused on using viral NPs as conjugation templates to produce novel nanostructures [129][130] and cages for compound encapsulation

Graphene composites with dental and biomedical applicability

• Sharali Malik,
• Felicite M. Ruddock,
• Adam H. Dowling,
• Kevin Byrne,
• Wolfgang Schmitt,
• Ivan Khalakhan,
• Yoshihiro Nemoto,
• Hongxuan Guo,
• Lok Kumar Shrestha,
• Katsuhiko Ariga and
• Jonathan P. Hill

Beilstein J. Nanotechnol. 2018, 9, 801–808, doi:10.3762/bjnano.9.73

• method to make large quantities of few-layer graphene which was then incorporated into a common dental polymer to fabricate graphene-composites which shows very promising mechanical properties. Keywords: biocompatibility; bioglass; graphene; mechanical properties; nanocomposite; Introduction Now that

• conditions can lead to problems of mechanical failures cancelling out initial clinical success and over time requiring further work for restoration with the associated inconvenience and extra cost. Then there is the issue of biocompatibility to consider. Biocompatibility is a prerequisite for all dental

Synthesis and characterization of two new TiO₂-containing benzothiazole-based imine composites for organic device applications

• Anna Różycka,
• Agnieszka Iwan,
• Krzysztof Artur Bogdanowicz,
• Michal Filapek,
• Natalia Górska,
• Damian Pociecha,
• Marek Malinowski,
• Patryk Fryń,
• Agnieszka Hreniak,
• Jakub Rysz,
• Paweł Dąbczyński and
• Monika Marzec

Beilstein J. Nanotechnol. 2018, 9, 721–739, doi:10.3762/bjnano.9.67

• dioxide, due to its suitable band position, non-toxicity, low cost, and simple synthesis, is an appropriate material for modification of various metals. Its chemical stability and biocompatibility plays an important role in various applications such as gas sensors, photocatalytic hydrogen generation

Anchoring Fe₃O₄ nanoparticles in a reduced graphene oxide aerogel matrix via polydopamine coating

• Błażej Scheibe,
• Radosław Mrówczyński,
• Natalia Michalak,
• Karol Załęski,
• Michał Matczak,
• Mateusz Kempiński,
• Zuzanna Pietralik,
• Mikołaj Lewandowski,
• Stefan Jurga and
• Feliks Stobiecki

Beilstein J. Nanotechnol. 2018, 9, 591–601, doi:10.3762/bjnano.9.55

• (Fe3O4) or maghemite (γ-Fe2O3), are common functional additives widely applied in many different branches of science [35][36]. This is mainly thanks to their low price, simplicity of production, biocompatibility and environmental friendliness. There are two commonly used methods of iron oxide MNPs

Green synthesis of fluorescent carbon dots from spices for in vitro imaging and tumour cell growth inhibition

• Nagamalai Vasimalai,
• Vânia Vilas-Boas,
• Juan Gallo,
• María de Fátima Cerqueira,
• Mario Menéndez-Miranda,
• José Manuel Costa-Fernández,
• Lorena Diéguez,
• Begoña Espiña and
• María Teresa Fernández-Argüelles

Beilstein J. Nanotechnol. 2018, 9, 530–544, doi:10.3762/bjnano.9.51

• graphene quantum dots (GQDs) are emerging as new alternatives due to their excellent properties, including high photoluminescence, low photobleaching, high biocompatibility and low toxicity. C-dots avoid the use of heavy metals present in semiconductor quantum dots, which have raised important health and

Ultralight super-hydrophobic carbon aerogels based on cellulose nanofibers/poly(vinyl alcohol)/graphene oxide (CNFs/PVA/GO) for highly effective oil–water separation

• Zhaoyang Xu,
• Huan Zhou,
• Sicong Tan,
• Xiangdong Jiang,
• Weibing Wu,
• Jiangtao Shi and
• Peng Chen

Beilstein J. Nanotechnol. 2018, 9, 508–519, doi:10.3762/bjnano.9.49

• on the planet because of its biodegradability, sustainability, nontoxic nature, and biocompatibility [5]. Cellulose nanofibers (CNFs) derived from cellulose have gained wide attention due to their outstanding mechanical properties [6][7] such as an elastic modulus of 140 GPa [8]. In an aqueous

• consequence, we report a CNF-based aerogel (CNFs/PVA/GO aerogel) composed of a CNF skeleton combined with PVA and GO, which could conquer these drawbacks. PVA is a polymer that has many excellent properties such as biodegradability, low cost, biocompatibility and water solubility [25]. Additionally, GO was

Engineering of oriented carbon nanotubes in composite materials

• Razieh Beigmoradi,
• Abdolreza Samimi and
• Davod Mohebbi-Kalhori

Beilstein J. Nanotechnol. 2018, 9, 415–435, doi:10.3762/bjnano.9.41

• the CNT diameter and length are critical parameters in protein corona formation and biocompatibility [11][12]. In another research investigating the effect of aligning CNTs in composite material structures, a remarkable improvement in the electrical properties of CNT composites was observed, as

BN/Ag hybrid nanomaterials with petal-like surfaces as catalysts and antibacterial agents

• Konstantin L. Firestein,
• Denis V. Leybo,
• Alexander E. Steinman,
• Andrey M. Kovalskii,
• Andrei T. Matveev,
• Anton M. Manakhov,
• Irina V. Sukhorukova,
• Pavel V. Slukin,
• Nadezda K. Fursova,
• Sergey G. Ignatov,
• Dmitri V. Golberg and
• Dmitry V. Shtansky

Beilstein J. Nanotechnol. 2018, 9, 250–261, doi:10.3762/bjnano.9.27

• effects of different nanocomponents. In recent years, BN nanostructures have been in the focus due to advantageous combination of properties, such as high tensile strength and elastic modulus, superb chemical stability, biocompatibility, high thermal conductivity and perfect electrical insulation. This

The role of ligands in coinage-metal nanoparticles for electronics

• Ioannis Kanelidis and
• Tobias Kraus

Beilstein J. Nanotechnol. 2017, 8, 2625–2639, doi:10.3762/bjnano.8.263

• their high conductivity and relative stability. Gold is commonly applied if improved stability or biocompatibility is required. The synthesis and formulation of metal nanoparticles as inks requires appropriate ligands. Current literature provides many examples of ligands that provide various functions

Refractive index sensing and surface-enhanced Raman spectroscopy using silver–gold layered bimetallic plasmonic crystals

• Somi Kang,
• Sean E. Lehman,
• Matthew V. Schulmerich,
• An-Phong Le,
• Tae-woo Lee,
• Stephen K. Gray,
• Rohit Bhargava and
• Ralph G. Nuzzo

Beilstein J. Nanotechnol. 2017, 8, 2492–2503, doi:10.3762/bjnano.8.249

• [40][41][42]. It is Au, however, that is more widely utilized for analytical applications due to its long-term environmental stability, ease of surface modification, and biocompatibility [43]. The present study explores means for realizing synergy in utilizing the complementary attributes of each

Vapor-based polymers: from films to nanostructures

• Meike Koenig and
• Joerg Lahann

Beilstein J. Nanotechnol. 2017, 8, 2219–2220, doi:10.3762/bjnano.8.221

• from the coating material, which, in turn, often results in superior biocompatibility [10]. This, together with the conformal character of the coating, is of importance in a novel antibacterial catheter introduced by Franz et al. [11] Here, poly(p-xylylene), which is deposited via chemical vapor

Bi-layer sandwich film for antibacterial catheters

• Gerhard Franz,
• Florian Schamberger,
• Hamideh Heidari Zare,
• Sara Felicitas Bröskamp and
• Dieter Jocham

Beilstein J. Nanotechnol. 2017, 8, 1982–2001, doi:10.3762/bjnano.8.199

• in the uriniferous system is different from oral ingestion or intravenous injections. 5. Among the thousands of possible organic materials, just a few remain fulfilling the requirements of biocompatibility and of the FDA regulations. For the CVD deposition we chose poly(p-xylylene) N, PPX-N or

Carbon nano-onions as fluorescent on/off modulated nanoprobes for diagnostics

• Stefania Lettieri,
• Marta d’Amora,
• Adalberto Camisasca,
• Alberto Diaspro and
• Silvia Giordani

Beilstein J. Nanotechnol. 2017, 8, 1878–1888, doi:10.3762/bjnano.8.188

• biocompatibility [20]. We have previously shown that the pH-dependent switching ability of a dye is preserved when attached to CNOs [21] and on single-wall carbon nanotubes, [22] both in solution and in vitro. Thus, CNOs are suitable nanomaterials for biosensing applications. We exploited the photoinduced electron

Synthesis and functionalization of NaGdF₄:Yb,Er@NaGdF₄ core–shell nanoparticles for possible application as multimodal contrast agents

• Dovile Baziulyte-Paulaviciene,
• Vitalijus Karabanovas,
• Marius Stasys,
• Greta Jarockyte,
• Vilius Poderys,
• Simas Sakirzanovas and
• Ricardas Rotomskis

Beilstein J. Nanotechnol. 2017, 8, 1815–1824, doi:10.3762/bjnano.8.183

• behavior in biological systems and biocompatibility/nanotoxicity is still limited. The study of Cascales et al. showed that ultrasmall Yb:Er:NaGd(WO4)2 UCNPs could be successfully covered with Tween 80 and are internalized by human mesenchymal stem cells without triggering their metabolic activity, but

• uptake and cytotoxicity evaluation study showed that the UCNPs internalized into breast cancer cell lines and possessed low cytotoxicity and good biocompatibility. All these findings indicate that Tween 80-coated NaGdF4:Yb,Er@NaGdF4 UCNPs are a promising nanomaterial platform for imaging and detection in

• potential. The results representing hydrodynamic size distribution of UCNPs and their zeta potential that were measured using dynamic light scattering method (DLS). Acknowledgements This work was supported by the grant “Study of optical properties and biocompatibility of Na(Gd/Y)F4 nanoparticles” (No.MIP

Laser processing of thin-film multilayer structures: comparison between a 3D thermal model and experimental results

• Babak B. Naghshine and
• Amirkianoosh Kiani

Beilstein J. Nanotechnol. 2017, 8, 1749–1759, doi:10.3762/bjnano.8.176

• proven that laser processing a metallic surface can significantly improve the biocompatibility in the ablated area and living cells can adhere better to the surface [9][10][11][12][13] whereas, the heat affected zone becomes less biocompatible and cells will avoid that area [14]. Therefore, the growing

Near-infrared-responsive, superparamagnetic Au@Co nanochains

• Varadee Vittur,
• Arati G. Kolhatkar,
• Shreya Shah,
• Irene Rusakova,
• Dmitri Litvinov and
• T. Randall Lee

Beilstein J. Nanotechnol. 2017, 8, 1680–1687, doi:10.3762/bjnano.8.168

• various applications, such as energy conversion in solar cells [10][11], biosensing [12], photothermal therapy [13], and biomedical imaging [14]. Surface modification with an inorganic coating, such as silica, can lend biocompatibility to the nanoparticles [15][16][17][18]. A gold shell on magnetic

Uptake and intracellular accumulation of diamond nanoparticles – a metabolic and cytotoxic study

• Antonín Brož,
• Lucie Bačáková,
• Pavla Štenclová,
• Alexander Kromka and
• Štěpán Potocký

Beilstein J. Nanotechnol. 2017, 8, 1649–1657, doi:10.3762/bjnano.8.165

• , HPHT PL, DND) and surface termination and energy showed that the toxicity is mostly dependent on particle surface modification. In our study, oxygen termination emerges as the best surface modification for ND particles from the point-of-view of their biocompatibility. The viability of cells cultivated

• viability The cell viability upon exposure to the NDs was evaluated using the SAOS-2 human osteoblastic cell line (European Collection of Cell Cultures, Salisbury, UK, Cat. No. 89050205). The SAOS-2 cell line was used for biocompatibility experiments based on cell anchorage dependency and homogeneity. Two

Surface functionalization of 3D-printed plastics via initiated chemical vapor deposition

• Christine Cheng and
• Malancha Gupta

Beilstein J. Nanotechnol. 2017, 8, 1629–1636, doi:10.3762/bjnano.8.162

• . This limitation presents a problem for application-driven print objects, because consideration of material printability must supersede other functionalities, such as biocompatibility or responsiveness to stimuli. Thus, controlling post-printing surface properties is critical to expanding the breadth of

Luminescent supramolecular hydrogels from a tripeptide and nitrogen-doped carbon nanodots

• Maria C. Cringoli,
• Slavko Kralj,
• Marina Kurbasic,
• Massimo Urban and
• Silvia Marchesan

Beilstein J. Nanotechnol. 2017, 8, 1553–1562, doi:10.3762/bjnano.8.157

• excellent water solubility, ease of functionalization, high chemical stability and resistance to photo-bleaching. In particular, CNDs have attracted particular interest in light of their biocompatibility, combined with their fascinating fluorescence properties, such as excitation-dependent emission range

• ][31] and bearing unnatural D-amino acids [32][33] are attractive biomaterials that may display higher durability relative to traditional peptide counterparts, in addition to better biocompatibility and the possibility to incorporate bioactive motifs relative to non-peptide hydrogels. Therefore, in the