Synthesis and the impact of hydroxyapatite nanoparticles on the viability and activity of rhizobacteria

• Bedah Rupaedah,
• Indrika Novella,
• Atiek Rostika Noviyanti,
• Diana Rakhmawaty Eddy,
• Anna Safarrida,
• Abdul Hapid,
• Zhafira Amila Haqqa,
• Suryana Suryana,
• Irwan Kurnia and
• Fathiyah Inayatirrahmi

Beilstein J. Nanotechnol. 2025, 16, 216–228, doi:10.3762/bjnano.16.17

• . Furthermore, they require only small quantities for utilization [8]. Several types of nanoparticles have been employed as carriers for rhizobacteria inoculants, including silica nanoparticles [9], clay nanoparticles [8], carbon nanoparticles [10], zinc oxide nanoparticles [11], and calcium carbonate

A review on the structural characterization of nanomaterials for nano-QSAR models

• Salvador Moncho,
• Eva Serrano-Candelas,
• Jesús Vicente de Julián-Ortiz and
• Rafael Gozalbes

Beilstein J. Nanotechnol. 2024, 15, 854–866, doi:10.3762/bjnano.15.71

• approaches, quasi-SMILES allow for numerical values for the size and similar experimental values [36]. A different approach to describe the shape and size is provided by the use of the calculated molecular weight for discrete carbon nanoparticles, as well as their calculated surface area (overall and

Laser synthesis of nanoparticles in organic solvents – products, reactions, and perspectives

• Theo Fromme,
• Sven Reichenberger,
• Katharine M. Tibbetts and
• Stephan Barcikowski

Beilstein J. Nanotechnol. 2024, 15, 638–663, doi:10.3762/bjnano.15.54

• . Irradiation of organic solvents in the absence of inorganic targets has been observed to form solid carbon nanoparticles, as reviewed recently by Frias Batista and coworkers [43]. For instance, fluorescent carbon dots, which are amorphous carbon-based particles with a diameter below 10 nm, are obtained upon

Application of nanoarchitectonics in moist-electric generation

• Jia-Cheng Feng and
• Hong Xia

Beilstein J. Nanotechnol. 2022, 13, 1185–1200, doi:10.3762/bjnano.13.99

• discussed in detail. 2 Inorganic nanomaterials for MEG 2.1 Carbon nanotubes and carbon nanoparticles Among inorganic nanomaterials, carbon nanoparticles, carbon nanotubes, graphene, graphene oxide, metal oxides, and transition metal chalcogenides (TMDs) have been reported so far regarding applications in

• ion species. Dropping a droplet of 80 μL 0.6 M CuCl2 solution from 15 cm above the contact point onto a 70° tilted graphene surface under gravity may create a pulse voltage of 30 mV and a short-circuit current of 1.7 μA, as shown in Figure 2c–f. Carbon nanoparticles form nanoscale networks by stacking

• deposition (Figure 3a). Zhou Jun's group used this kind of carbon nanoscale network to absorb the evaporation energy of water vapor and have a stable electrical output of 1 V, 100 nA in 2017 [9][37][46]. The carbon nanoparticles are easy to obtain, and a large number of carbon nanoparticles can be collected

Recent advances in green carbon dots (2015–2022): synthesis, metal ion sensing, and biological applications

• Aisha Kanwal,
• Naheed Bibi,
• Sajjad Hyder,
• Arif Muhammad,
• Hao Ren,
• Jiangtao Liu and
• Zhongli Lei

Beilstein J. Nanotechnol. 2022, 13, 1068–1107, doi:10.3762/bjnano.13.93

• carbon nanoparticles during electrophoretic purification of single-walled carbon nanotubes [1]. Sun et al. synthesized fluorescent carbon particles smaller than 10 nm, which were named “carbon dots” for the first time in 2006 [2]. Due to its significant fluorescent properties, this class of carbon

Biomimetic chitosan with biocomposite nanomaterials for bone tissue repair and regeneration

• Se-Kwon Kim,
• Sesha Subramanian Murugan,
• Pandurang Appana Dalavi,
• Sebanti Gupta,
• Sukumaran Anil,
• Gi Hun Seong and
• Jayachandran Venkatesan

Beilstein J. Nanotechnol. 2022, 13, 1051–1067, doi:10.3762/bjnano.13.92

• tissue engineering Chitosan–carbon nanotube composites Carbon nanotubes have distinct physical, chemical, and optical properties that enable new bioengineering applications, notably in the development of natural bone tissue repair and replacement scaffolds. Carbon nanoparticles can provide a chemically

Nickel nanoparticles supported on a covalent triazine framework as electrocatalyst for oxygen evolution reaction and oxygen reduction reactions

• Secil Öztürk,
• Yu-Xuan Xiao,
• Dennis Dietrich,
• Beatriz Giesen,
• Juri Barthel,
• Jie Ying,
• Xiao-Yu Yang and
• Christoph Janiak

Beilstein J. Nanotechnol. 2020, 11, 770–781, doi:10.3762/bjnano.11.62

• group of Prof. Fan, Co3O4/CTF1-700-1:1 has been studied as ORR catalyst and showed a half-wave potential of 0.84 V vs a reversible hydrogen electrode (RHE) [20]. Kamiya et. al. synthesized a Pt-atom-modified CTF hybridized with conductive carbon nanoparticles and used it as an ORR catalyst [36]. The

• same group also produced a Cu-modified CTF hybridized with carbon nanoparticles and it showed the highest reported value among Cu-based electrocatalysts with 810 mV onset potential vs RHE for the ORR at neutral pH value [37]. In contrast, up to now there are only few studies that investigated CTFs as

Soybean-derived blue photoluminescent carbon dots

• Shanshan Wang,
• Wei Sun,
• Dong-sheng Yang and
• Fuqian Yang

Beilstein J. Nanotechnol. 2020, 11, 606–619, doi:10.3762/bjnano.11.48

• residuals to synthesize carbon nanoparticles by hydrothermal carbonization (HTC), annealing at high temperature, and laser ablation (LA) in a NH4OH solution. The carbon nanoparticles synthesized with the HTC process (HTC-CDs) exhibit photoluminescent characteristics with strong blue emission. The annealing

• to introduce N-surface-functional groups to carbon nanoparticles made from biomass and biowaste and to produce stable photoluminescent CDs with excellent water-wettability. Keywords: biomass; carbon dots; hydrothermal process; laser ablation; N-doping; photoluminescence; Introduction Carbon-based

• , which involves the HTC treatment, high-temperature annealing, and LAL processing, sequentially. The purpose of the LAL processing is to introduce N-containing functional groups onto the surface of carbon nanoparticles and to recover the PL of carbon nanoparticles/CDs that was quenched by the high

Identification of physicochemical properties that modulate nanoparticle aggregation in blood

• Ludovica Soddu,
• Duong N. Trinh,
• Eimear Dunne,
• Dermot Kenny,
• Giorgia Bernardini,
• Ida Kokalari,
• Arianna Marucco,
• Marco P. Monopoli and
• Ivana Fenoglio

Beilstein J. Nanotechnol. 2020, 11, 550–567, doi:10.3762/bjnano.11.44

• role. On the other hand, large carbon nanoparticles (but not small carbon nanoparticles or silica nanoparticles) have a clear tendency to form aggregates both in plasma and blood. This effect was observed both in the presence or absence of platelets and was independent of platelet activation. Overall

• other hand, contrasting data have been reported on the potential of isometric carbon nanoparticles (CNPs) like carbon black, fullerenes and diesel exhaust particles to induce platelet activation and NP aggregation [10][11][13]. Systemic administration of carbon black in mice resulted in fibrinogen and

• (Germany). 5,5-dimethyl-1-pyrroline N-oxide (DMPO) was obtained from Cayman Chemicals (USA). Ultrapure water was obtained from a Milli-Q Plus system (Millipore, Bedford, MA, USA). All other chemicals and solvents used were at least of analytical grade. Synthesis of carbon nanoparticles Carbon nanoparticles

Multicomponent bionanocomposites based on clay nanoarchitectures for electrochemical devices

• Giulia Lo Dico,
• Bernd Wicklein,
• Lorenzo Lisuzzo,
• Giuseppe Lazzara,
• Pilar Aranda and
• Eduardo Ruiz-Hitzky

Beilstein J. Nanotechnol. 2019, 10, 1303–1315, doi:10.3762/bjnano.10.129

• S·m−1 [52]). The electrical percolation threshold of the foams was around 6.5 wt % MWCNT content. The higher value in foams reflects a poorer connectivity between carbon nanoparticles dispersed in the clay–polymer matrix probably due to the high porosity, requiring a larger amount of GNPs/MWCNTs to

Impact of titanium dioxide nanoparticles on purification and contamination of nematic liquid crystals

• Dmitrii Pavlovich Shcherbinin and
• Elena A. Konshina

Beilstein J. Nanotechnol. 2017, 8, 2766–2770, doi:10.3762/bjnano.8.275

• ionic contamination was observed in LCs doped with carbon nanoparticles [21], semiconductor quantum dots [22], and metal NPs [23]. At the same time, the increase of ionic contamination due to doping with NPs was reported in other papers [24][25][26]. This contradiction was resolved by the theory

Fabrication of carbon nanospheres by the pyrolysis of polyacrylonitrile–poly(methyl methacrylate) core–shell composite nanoparticles

• Dafu Wei,
• Youwei Zhang and
• Jinping Fu

Beilstein J. Nanotechnol. 2017, 8, 1897–1908, doi:10.3762/bjnano.8.190

• carbonization treatments, polyacrylonitrile (PAN) can be converted into carbon. High-performance carbon fibers, carbon nanofiber membranes, 3D-ordered carbon materials, and carbon nanoparticles have been fabricated from various PAN precursors [28][29][30][31][32][33][34][35]. Discrete and well-defined carbon

• adhesion between the carbon nanoparticles. As a result, an agglomerated carbon bulk instead of discrete carbon nanoparticles was obtained [33][34]. To solve this problem, Wu et al. [33] coated a protective layer of inorganic salt, titanium phosphate (TP), on the surfaces of the PAN nanoparticles. The

• adhesion was inhibited, and a few discrete carbon nanoparticles were obtained. However, the carbonized product still contained many agglomerates of carbon nanoparticles with partial merged edges. The possible reason is that the coated TP layer was too thin to completely cover the surface of the PAN

BTEX detection with composites of ethylenevinyl acetate and nanostructured carbon

• Santa Stepina,
• Astrida Berzina,
• Gita Sakale and
• Maris Knite

Beilstein J. Nanotechnol. 2017, 8, 982–988, doi:10.3762/bjnano.8.100

• order to determine dispersion, aggregate size and distribution of carbon nanoparticles. Gas sensing measurements are made using different concentrations of BTEX vapours as well as of gasoline vapours. Experimental Materials and composite structure The sensor material used is a nanostructured composite

• chosen because of its dual polarity. EVA has a polar part (vinyl acetate) and a non-polar part (ethylene). This allows one to detect polar as well as non-polar VOC vapours. Carbon nanoparticles (CB; PRINTEX XE-2) with average particle size of 30 nm were used as electroconductive filler. The composite EVA

Modeling adsorption of brominated, chlorinated and mixed bromo/chloro-dibenzo-p-dioxins on C₆₀ fullerene using Nano-QSPR

• Piotr Urbaszek,
• Agnieszka Gajewicz,
• Celina Sikorska,
• Maciej Haranczyk and
• Tomasz Puzyn

Beilstein J. Nanotechnol. 2017, 8, 752–761, doi:10.3762/bjnano.8.78

• mechanisms on carbon nanoparticles surfaces is essential in order to evaluate the risk, further applications and toxicity assessment. Moreover, the presented Nano-QSPR approach seems to be very helpful in this type of study and in predictions of such weak forces such as dispersion interactions. Taking into

Fundamental properties of high-quality carbon nanofoam: from low to high density

• Natalie Frese,
• Shelby Taylor Mitchell,
• Christof Neumann,
• Amanda Bowers,
• Armin Gölzhäuser and
• Klaus Sattler

Beilstein J. Nanotechnol. 2016, 7, 2065–2073, doi:10.3762/bjnano.7.197

• carbon (1.8–2.1 g·cm−3), carbon nanotubes (1.6 g cm−3) or diamond (3.515 g·cm−3) [40]. Various types of low-weight carbons have been reported in the literature, with densities typically between 100 and 300 mg·cm−3. Among these are carbon aerogels [41][42][43], amorphous carbon nanoparticles [44][45

Multiwalled carbon nanotube hybrids as MRI contrast agents

• Nikodem Kuźnik and
• Mateusz M. Tomczyk

Beilstein J. Nanotechnol. 2016, 7, 1086–1103, doi:10.3762/bjnano.7.102

• effects on the relaxivity measurements: in the case of carbon nanoparticles, any additives to water, such as a polymeric substance, will increase the stability of dispersion by reducing agglomeration by wrapping the particles. However, this leads to loading the CNTs with an additional mass and decreasing

Facile synthesis of water-soluble carbon nano-onions under alkaline conditions

• Gaber Hashem Gaber Ahmed,
• Rosana Badía Laíño,
• Josefa Angela García Calzón and
• Marta Elena Díaz García

Beilstein J. Nanotechnol. 2016, 7, 758–766, doi:10.3762/bjnano.7.67

• sensors. The more popular and extensively investigated carbon-based nanomaterials include carbon dots (C-dots), fullerenes, nanotubes and graphene, while others, such as nanodiamonds and carbon onions, stayed forgotten for a long time, in spite of the fact that these carbon nanoparticles (C-NPs) were

• discovered before the former [1]. C-dots are a special class of carbon nanoparticles that have interesting practical advantages such as low toxicity, relatively small size (≤10 nm), chemical stability, high solubility in water and easy synthesis. Besides, owing to their remarkable photoluminescence (PL

• -onions (C-onions) are another kind of carbon nanoparticles that exhibit outstanding chemical and physical properties. C-onions are spherical carbon shells enclosed within one another (multi-layered fullerenes) with diameters ranging from 3 to 50 nm [9], depending on the method of synthesis. C-onions have

Nanotechnology in the real world: Redeveloping the nanomaterial consumer products inventory

• Marina E. Vance,
• Todd Kuiken,
• Eric P. Vejerano,
• Sean P. McGinnis,
• Michael F. Hochella Jr.,
• David Rejeski and
• Matthew S. Hull

Beilstein J. Nanotechnol. 2015, 6, 1769–1780, doi:10.3762/bjnano.6.181

• nanomaterials (89 products), the majority of products listed contains carbon nanoparticles (sometimes described as carbon black, 39 products) and single- or multi-walled carbon nanotubes (CNT, 38 products). Unfortunately, 891 (49%) of the products included in the CPI do not present the composition or a detailed

Possibilities and limitations of advanced transmission electron microscopy for carbon-based nanomaterials

• Xiaoxing Ke,
• Carla Bittencourt and
• Gustaaf Van Tendeloo

Beilstein J. Nanotechnol. 2015, 6, 1541–1557, doi:10.3762/bjnano.6.158

• ” referring to charcoal. The use of charcoal, soot and coal dates back to prehistoric times, when nano-structured carbon materials already existed. Analysis of prehistoric cave paintings in Altamira (Spain) and Lascaux (France) has revealed the presence of carbon nanoparticles [14][15][16]. Carbon

• responsible for its extraordinary mechanical properties [19][20][21]. In the materials mentioned above, nano-structured carbon was used as an essential part to tailor their properties and characteristics. Carbon nanoparticles are mixed with collagen-derived animal glue to achieve a high homogeneity when

• nanoparticles were also essential ingredients in inks and printing pastes used over centuries in various cultures [17]. Another example are carbon nanotubes (CNTs) [18] which found their way into the secret recipe of ultra-sharp Damascus steel, which dates back to seventeenth century, and are believed to be

Using natural language processing techniques to inform research on nanotechnology

• Nastassja A. Lewinski and
• Bridget T. McInnes

Beilstein J. Nanotechnol. 2015, 6, 1439–1449, doi:10.3762/bjnano.6.149

• the sentence “The purpose of this study was to review published dose-response data on acute lung inflammation in rats after instillation of titanium dioxide particles or six types of carbon nanoparticles.” with the NANO, EXPO, TARGET and TOXIC mentions within the sentence “The purpose of this study

• was to review published dose-response data on acute lung inflammation in rats after installation of titanium dioxide particles or six types of carbon nanoparticles ).” Features extracted from the context

Experimental techniques for the characterization of carbon nanoparticles – a brief overview

• Wojciech Kempiński,
• Szymon Łoś,
• Mateusz Kempiński and
• Damian Markowski

Beilstein J. Nanotechnol. 2014, 5, 1760–1766, doi:10.3762/bjnano.5.186

• Mickiewicz University, Umultowska 85, Poznań, 61-614, Poland 10.3762/bjnano.5.186 Abstract The review of four experimental methods: X-ray diffraction, Raman spectroscopy, electron paramagnetic resonance and four-point electrical conductivity measurements is presented to characterize carbon nanoparticles

• . Two types of carbon nanoparticle systems are discussed: one comprising the powder of individual carbon nanoparticles and the second as a structurally interconnected nanoparticle matrix in the form of a fiber. X-ray diffraction and Raman spectroscopy reveal the atomic structure of the carbon

• carriers within the nanoparticles, which can be observed with the EPR technique. This in turn can be well-correlated with the four-point electrical conductivity measurements which directly show the character of the charge carrier transport within the examined structures. Keywords: carbon nanoparticles