Hymenoptera and biomimetic surfaces: insights and innovations

• Vinicius Marques Lopez,
• Carlo Polidori and
• Rhainer Guillermo Ferreira

Beilstein J. Nanotechnol. 2024, 15, 1333–1352, doi:10.3762/bjnano.15.107

• sculptured and thick cuticle of some hymenopterans is also associated with increased resistance to fractures and high pressures [16] and may also potentially reduce water loss [17][18]. Alternative hypotheses yet to be tested for the function of such complex cuticle sculpturing is the air drag reduction

Investigation on drag reduction on rotating blade surfaces with microtextures

• Qinsong Zhu,
• Chen Zhang,
• Fuhang Yu and
• Yan Xu

Beilstein J. Nanotechnol. 2024, 15, 833–853, doi:10.3762/bjnano.15.70

• results. Second, the placement position and geometrical parameters (height, width, and spacing) of microtextures with lower energy loss were determined by our simulation of microtextures on the blade surface, and the drag reduction mechanism was analyzed. Triangular ribs with a height of 0.2 mm, a width

• of 0.3 mm, and a spacing of 0.2 mm exhibited the best drag reduction, reducing the energy loss coefficient and drag by 1.45% and 1.31% for a single blade, respectively. Finally, the blades with the optimal microtexture parameters were tested in the wind tunnel. The experimental results showed that

• the microtexture decreased energy loss by 3.7% for a single blade under 57° angle of attack and 136.24 m/s, which was favorable regarding the drag reduction performance of the impeller with 45 blades. Keywords: blade; drag-reducing microtexture; geometrical parameters; placement position; simulations

Biomimetics on the micro- and nanoscale – The 25th anniversary of the lotus effect

• Matthias Mail,
• Kerstin Koch,
• Thomas Speck,
• William M. Megill and
• Stanislav N. Gorb

Beilstein J. Nanotechnol. 2023, 14, 850–856, doi:10.3762/bjnano.14.69

• repellency, but also on the capability of some surfaces to keep stable air layers under water – the so-called Salvinia Effect. Such air layers are of great importance for drag reduction (passive air lubrication), antifouling, sensor applications, or oil–water separation. Up to now, based on the

Dry under water: air retaining properties of large-scale elastomer foils covered with mushroom-shaped surface microstructures

• Matthias Mail,
• Stefan Walheim,
• Thomas Schimmel,
• Wilhelm Barthlott,
• Stanislav N. Gorb and
• Lars Heepe

Beilstein J. Nanotechnol. 2022, 13, 1370–1379, doi:10.3762/bjnano.13.113

• Effect, the capability to keep a stable air layer when submerged under water. Such air layers are of great importance, e.g., for drag reduction (passive air lubrication), antifouling, sensor applications or oil–water separation. Some biological models, e.g., the floating fern Salvinia or the backswimmer

• function for biomimetic air retaining surfaces is drag reduction. If an air layer is mounted between a solid surface and water flowing over this surface, the air layer serves as slip agent [26][27][28]. Such a drag reducing coverage allows significant friction reduction (up to 30%) in applications, where

• for the development of biomimetic air retaining surfaces have been found [1]. Transferring these parameters into technical surfaces, different prototypes have been developed, showing air retention over several years and drag reduction values up to 30% [24][36]. Up to now, all these prototypes are only

Roll-to-roll fabrication of superhydrophobic pads covered with nanofur for the efficient clean-up of oil spills

• Patrick Weiser,
• Robin Kietz,
• Marc Schneider,
• Matthias Worgull and
• Hendrik Hölscher

Beilstein J. Nanotechnol. 2022, 13, 1228–1239, doi:10.3762/bjnano.13.102

• packaging and bottles, anti-fouling [36] and antibacterial [37] surfaces, or drag reduction [38] are imaginable. With the low-cost production of large areas of nanofur they seem also financially feasible. Schematic showing the roll-to-roll fabriction of a thin nanofur film by the example of PP and COC. (a

Micro-structures, nanomechanical properties and flight performance of three beetles with different folding ratios

• Jiyu Sun,
• Pengpeng Li,
• Yongwei Yan,
• Fa Song,
• Nuo Xu and
• Zhijun Zhang

Beilstein J. Nanotechnol. 2022, 13, 845–856, doi:10.3762/bjnano.13.75

• deformation occurs. This changes the aspect ratio, b2/Sw, and Dind = 2L2/πρb2v2). Thus, the drag reduction mainly comes from Dpro = 0.5ρv2SwCDpro and Dpar = 0.5ρv2SbCDpar, in which CDpro and CDpar are the dimensionless drag coefficient and the body drag coefficient, respectively. It might also be the reason

Hierachical epicuticular wax coverage on leaves of Deschampsia antarctica as a possible adaptation to severe environmental conditions

• Elena V. Gorb,
• Iryna A. Kozeretska and
• Stanislav N. Gorb

Beilstein J. Nanotechnol. 2022, 13, 807–816, doi:10.3762/bjnano.13.71

• ., Asclepiadaceae and Cactaceae) [15], plays a crucial role in the protection from water loss. Biomimetic potential Since the discovery of the lotus effect [43], different properties of superhydrophobic surfaces in plants, which are highly relevant for modern technologies, such as self-cleaning, fluid drag

• reduction, or holding air layers at a surface, have been described and their biomimetic applications have been discussed. Phylogenetic trees indicate that superhydrophobicity evolved as a consequence of the conquest of land about 450 million years ago and may be a key innovation in the evolution of

A review on slip boundary conditions at the nanoscale: recent development and applications

• Ruifei Wang,
• Jin Chai,
• Bobo Luo,
• Xiong Liu,
• Jianting Zhang,
• Min Wu,
• Mingdan Wei and
• Zhuanyue Ma

Beilstein J. Nanotechnol. 2021, 12, 1237–1251, doi:10.3762/bjnano.12.91

• ]. 3 Applications of nanofluidics with tunable slip length 3.1 Drag reduction Reducing drag is of great significance in many areas related to nanotechnology, such as nanotribology [117], nanomedicine [118], and electrokinetics [119] due to the low energy dissipation. For instance, it has been reported

• that the drag reduction might lead to the improvement of energy conversion efficiency from mechanical to electrical energy for the generation of streaming current induced by the pressure difference [119]. As stated in Section 1.1, the drag reduction is equivalent to the increase of slip length, which

• turbulent flow regime, and at a given Reynolds number Re, the magnitude of drag reduction increases with the increase in feature size and spacing [120]. Furthermore, Srinivasan et al. reported that the dimensionless effective slip length is the key parameter that governs the drag reduction on

An investigation on the drag reduction performance of bioinspired pipeline surfaces with transverse microgrooves

• Weili Liu,
• Hongjian Ni,
• Peng Wang and
• Yi Zhou

Beilstein J. Nanotechnol. 2020, 11, 24–40, doi:10.3762/bjnano.11.3

• were undertaken to evaluate the drag reduction performance of these bionic pipelines. It was found that the vortex ‘cushioning’ and ‘driving’ effects produced by the vortexes in the microgrooves were the main reason for obtaining a drag reduction effect. The shear stress of the microgrooved surface was

• reduced significantly owing to the decline of the velocity gradient. Altogether, bionic pipelines achieved drag reduction effects both in a pipeline and in a concentric annulus flow model. The primary and secondary order of effect on the drag reduction and optimal microgroove geometric parameters were

• obtained by an orthogonal analysis method. The comparative experiments were conducted in a water tunnel, and a maximum drag reduction rate of 3.21% could be achieved. The numerical simulation and experimental results were cross-checked and found to be consistent with each other, allowing to verify that the

A new bioinspired method for pressure and flow sensing based on the underwater air-retaining surface of the backswimmer Notonecta

• Matthias Mail,
• Adrian Klein,
• Horst Bleckmann,
• Anke Schmitz,
• Torsten Scherer,
• Peter T. Rühr,
• Goran Lovric,
• Robin Fröhlingsdorf,
• Stanislav N. Gorb and
• Wilhelm Barthlott

Beilstein J. Nanotechnol. 2018, 9, 3039–3047, doi:10.3762/bjnano.9.282

• mechanosensitive setae not only for drag reduction, but also for the detection of prey or predators. With one exception [16], the involvement of air layers in a sensory function has never been demonstrated. A possible principle for a sensor that uses an air layer for the detection of pressure changes is shown in

Collembola cuticles and the three-phase line tension

• Håkon Gundersen,
• Hans Petter Leinaas and
• Christian Thaulow

Beilstein J. Nanotechnol. 2017, 8, 1714–1722, doi:10.3762/bjnano.8.172

• in functional surfaces with effects like self-cleaning, drag reduction and air retention [10][11][12]. The field of superhydrophobic surfaces has made extensive use of biomimetic methods, where the imitation of natural surfaces provides the basis for artificial surfaces [9][13][14]. The exact nature

Air–water interface of submerged superhydrophobic surfaces imaged by atomic force microscopy

• Markus Moosmann,
• Thomas Schimmel,
• Wilhelm Barthlott and
• Matthias Mail

Beilstein J. Nanotechnol. 2017, 8, 1671–1679, doi:10.3762/bjnano.8.167

• fields of drag reduction, antifouling, anticorrosion and under water sensing. Current knowledge regarding the shape of the air–water interface is insufficient, although it plays a crucial role with regards to stability in terms of diffusion and dynamic conditions. Optical methods for imaging the

• years, the Salvinia effect – the long term stabilization of an air layer on a submerged surface – has gained increasing interest. There is great potential for various technical applications utilizing this effect, for example, drag reduction, antifouling or anticorrosion applications, and underwater

Measuring adhesion on rough surfaces using atomic force microscopy with a liquid probe

• Juan V. Escobar,
• Cristina Garza and
• Rolando Castillo

Beilstein J. Nanotechnol. 2017, 8, 813–825, doi:10.3762/bjnano.8.84

• ], in self-cleaning – because liquid-repellency is correlated with a low adhesion force –, drag reduction [14], fog harvesting [15], and to understand adhesive interactions between imaging materials, which are crucial in print-engine design, and print-process development in the printing industry [16

When the going gets rough – studying the effect of surface roughness on the adhesive abilities of tree frogs

• Niall Crawford,
• Thomas Endlein,
• Jonathan T. Pham,
• Mathis Riehle and
• W. Jon P. Barnes

Beilstein J. Nanotechnol. 2016, 7, 2116–2131, doi:10.3762/bjnano.7.201

• twigs [50]. We are thus building up a good understanding of both the underlying mechanisms and the ecology of tree frog adhesive mechanisms. But this study goes further: comparable to the drag reduction mechanisms of snake skin [51], the superhydrophobicity and self-cleaning mechanisms of lotus leaves

The capillary adhesion technique: a versatile method for determining the liquid adhesion force and sample stiffness

• Daniel Gandyra,
• Stefan Walheim,
• Stanislav Gorb,
• Wilhelm Barthlott and
• Thomas Schimmel

Beilstein J. Nanotechnol. 2015, 6, 11–18, doi:10.3762/bjnano.6.2

• [4][5] because of the significant drag reduction [6][7][8][9][10][11][12]. However, an essential requirement for the functionality of these surfaces is the persistence of the air layer [13][14][15]. As all of the highly engineered surfaces developed to date have failed in this respect [9][10][11][12

• molesta attracts considerable attention due to its ability to maintain a persistent layer of air on its leaves under water. This feature could be of high technological relevance, opening perspectives for completely new concepts for drag reduction of ships, for example, lubricating a ship hull with a

Measuring air layer volumes retained by submerged floating-ferns Salvinia and biomimetic superhydrophobic surfaces

• Matthias J. Mayser,
• Holger F. Bohn,
• Meike Reker and
• Wilhelm Barthlott

Beilstein J. Nanotechnol. 2014, 5, 812–821, doi:10.3762/bjnano.5.93

• biomimetic applications like drag reduction in ship coatings of up to 30%. Here we present a novel method for measuring air volumes and air loss under water. We recorded the buoyancy force of the air layer on leaf surfaces of four different Salvinia species and on one biomimetic surface using a highly

• also allows to measure decrease or increase of air layers with high accuracy in real-time to understand dynamic processes. Keywords: air layer; biomimetic; drag reduction; functional surfaces; plastron; Salvinia effect; volume measurement; Introduction Since the description of hierarchically

• applications for these trapped air layers in the Cassie wetting regime have been proposed which include drag reducing ship coatings or fluid channels [22][23][24][25][26] with the capability of 30% drag reduction [27] and could provide high economic and ecologic value [28][29]. While superhydrophobic plant

The surface microstructure of cusps and leaflets in rabbit and mouse heart valves

• Xia Ye,
• Bharat Bhushan,
• Ming Zhou and
• Weining Lei

Beilstein J. Nanotechnol. 2014, 5, 622–629, doi:10.3762/bjnano.5.73

• adhesion, and drag reduction. Therefore, studying the surfaces of natural organisms is extremely important and significant. Moreover, results of this study could have a substantial effect on the manufacturing of artificial biological products. During the past decade, the special surface microstructures of

Superhydrophobic surfaces of the water bug Notonecta glauca: a model for friction reduction and air retention

• Petra Ditsche-Kuru,
• Erik S. Schneider,
• Jan-Erik Melskotte,
• Martin Brede,
• Alfred Leder and
• Wilhelm Barthlott

Beilstein J. Nanotechnol. 2011, 2, 137–144, doi:10.3762/bjnano.2.17

• extremely interesting as a biomimetic model for low friction fluid transport or drag reduction on ship hulls. Keywords: air film; aquatic insects; backswimmer; drag reduction; superhydrophobic surfaces; Introduction Superhydrophobic surfaces are of great economic interest because of their amazing

• and ecological interest for low friction fluid transport and friction reduction on ship hulls [10][11][12]. On some technical superhydrophobic surfaces extremely high drag reduction of up to 50% was measured, but on these surfaces the air film lasted only a short time [13][14][15]. Biological air

• applications of air retaining surfaces for low friction fluid transport and drag reduction on ship hulls, the durability of the air film is most important. While on many superhydrophobic surfaces the air film usually lasts no longer than a few days, some semi-aquatic plants and insects are able to hold an air

Biomimetics inspired surfaces for drag reduction and oleophobicity/philicity

• Bharat Bhushan

Beilstein J. Nanotechnol. 2011, 2, 66–84, doi:10.3762/bjnano.2.9

• a high contact angle and low contact angle hysteresis also exhibit low adhesion and drag reduction for fluid flow. An aquatic animal, such as a shark, is another model from nature for the reduction of drag in fluid flow. The artificial surfaces inspired from the shark skin and lotus leaf have been

• created, and in this article the influence of structure on drag reduction efficiency is reviewed. Biomimetic-inspired oleophobic surfaces can be used to prevent contamination of the underwater parts of ships by biological and organic contaminants, including oil. The article also reviews the wetting

• superhydrophobic, self-cleaning, low adhesion, and drag reduction surfaces Drag reduction in fluid flow is of interest in various commercial applications. These include transportation vehicles and micro/nanofluidics based biosensor applications [3]. To reduce pressure drop and volume loss in micro/nanochannels