Polyurethane/silk fibroin-based electrospun membranes for wound healing and skin substitute applications

• Iqra Zainab,
• Zohra Naseem,
• Syeda Rubab Batool,
• Muhammad Waqas,
• Ahsan Nazir and
• Muhammad Anwaar Nazeer

Beilstein J. Nanotechnol. 2025, 16, 591–612, doi:10.3762/bjnano.16.46

• design offers a large surface area. They are biocompatible, lowering the possibility of negative immune responses, and are adaptable to the use as films, gels, or scaffolds for different kinds of wounds [169]. Materials such as gold nanoparticles, graphene oxide, and silicon nanostructures are frequently

Nanomaterials in targeting amyloid-β oligomers: current advances and future directions for Alzheimer's disease diagnosis and therapy

• Shiwani Randhawa,
• Trilok Chand Saini,
• Manik Bathla,
• Rahul Bhardwaj,
• Rubina Dhiman and
• Amitabha Acharya

Beilstein J. Nanotechnol. 2025, 16, 561–580, doi:10.3762/bjnano.16.44

• electrochemical detection of AβOs via a nanobiosensor consisting of gold nanoparticles (AuNPs) embedded in a conductive polymeric matrix. For this, the surface of the AuNPs was further modified with PrPc, which acted as the biorecognition element for the specific detection of AβOs in ex vivo real samples, viz

• , with a detection range spanning from 10−9 to 103 nM [77]. An electrochemical, label-free aptassay developed by Gallo-Orive et al. incorporates graphene oxide–gold nanoparticles/nickel/platinum nanoparticles for the rapid and accurate detection of AβOs in complex clinical samples, such as brain tissue

• . Fluorescence studies revealed that the presence of the AuNRs significantly inhibits the development of larger oligomers and fibrils, with inhibition efficacy diminishing as the diameter of the NPs decreases [80]. In a different approach, Randhawa et al. designed glucosamine-conjugated gold nanoparticles (Gln

Functionalized gold nanoflowers on carbon screen-printed electrodes: an electrochemical platform for biosensing hemagglutinin protein of influenza A H1N1 virus

• Carlos Enrique Torres-Méndez,
• Sharmilee Nandi,
• Klara Martinovic,
• Patrizia Kühne,
• Yifan Liu,
• Sam Taylor,
• Maria Lysandrou,
• Maria Ines Berrojo Romeyro Mascarenhas,
• Viktoria Langwallner,
• Javier Enrique Sebastián Alonso,
• Ivana Jovanovic,
• Maike Lüftner,
• Georgia-Vasiliki Gkountana,
• David Bern,
• Abdul-Raouf Atif,
• Ehsan Manouchehri Doulabi,
• Gemma Mestres and
• Masood Kamali-Moghaddam

Beilstein J. Nanotechnol. 2025, 16, 540–550, doi:10.3762/bjnano.16.42

• protein at clinically relevant concentrations. Scanning electron microscopy Scanning electron microscopy (SEM) analysis was explored to characterize the surface of the electrodes after electrodeposition of gold nanoparticles (Figure 2). Because of the high conductivity of gold, a difference in contrast is

• observed when comparing the surface of the commercial CSPE (Figure 2A) to that of the AuNFs/CSPE (Figure 2B). The gold nanoparticles are evenly distributed across the surface of the electrode (Figure 2C). The deposited nanoparticles show a flower-like morphology with an average size of 139 nm and a

• charge transfer enhancement by a factor of eight according to studies on spheres, tetrapods, cubes, and dogbone nanoparticles [36]. In contrast, no enhancement effect, or even slower charge transfer kinetics have been observed for 4-ATP-functionalized gold nanoparticles bearing sizes between 5 and 25 nm

Effect of additives on the synthesis efficiency of nanoparticles by laser-induced reduction

• Rikuto Kuroda,
• Takahiro Nakamura,
• Hideki Ina and
• Shuhei Shibata

Beilstein J. Nanotechnol. 2025, 16, 464–472, doi:10.3762/bjnano.16.35

• increased in the synthesis of gold nanoparticles using LRL, the reduction reaction caused by laser irradiation does not sufficiently occur under the same laser irradiation conditions. The crystal growth progresses through equilibrium reactions with unreacted ions due to the self-catalytic effect of the

• solutions with concentrations of 5.0 × 10−3 and 1.0 × 10−2 mol/dm3 (Figure 5b, yellow and green) were almost the same as that of the solution with a concentration of 5.0 × 10−4 mol/dm3 (Figure 5b, blue). This indicates that gold nanoparticles with similar optical properties were formed in both cases

Synthetic-polymer-assisted antisense oligonucleotide delivery: targeted approaches for precision disease treatment

• Ana Cubillo Alvarez,
• Dylan Maguire and
• Ruairí P. Brannigan

Beilstein J. Nanotechnol. 2025, 16, 435–463, doi:10.3762/bjnano.16.34

Size control of nanoparticles synthesized by pulsed laser ablation in liquids using donut-shaped beams

• Abdel Rahman Altakroury,
• Oleksandr Gatsa,
• Farbod Riahi,
• Zongwen Fu,
• Miroslava Flimelová,
• Andrei Samokhvalov,
• Stephan Barcikowski,
• Carlos Doñate-Buendía,
• Alexander V. Bulgakov and
• Bilal Gökce

Beilstein J. Nanotechnol. 2025, 16, 407–417, doi:10.3762/bjnano.16.31

• this pioneering study, further investigation with higher temporal and spatial resolution are warranted. Keywords: beam shaping; cavitation bubble; donut beam; gold nanoparticles; high-entropy alloy nanoparticles; nanoparticle size analysis; yttrium oxide nanoparticles; Introduction The demand for

Pulsed laser in liquid grafting of gold nanoparticle–carbon support composites

• Madeleine K. Wilsey,
• Teona Taseska,
• Qishen Lyu,
• Connor P. Cox and
• Astrid M. Müller

Beilstein J. Nanotechnol. 2025, 16, 349–361, doi:10.3762/bjnano.16.26

• , University of Rochester, Rochester, New York 14627, United States 10.3762/bjnano.16.26 Abstract We developed a novel pulsed laser-assisted process for the fabrication of advanced composites of nonequilibrium gold nanoparticles on carbon fiber paper supports. Our one-step process integrates the generation of

• nanoparticles with their surface attachment and solves longstanding nanoparticle adhesion and electrical contact issues. Irradiation of hydrophilic carbon fiber paper submerged in aqueous HAuCl4 solution by nanosecond laser pulses produced composites with uniform distribution of gold nanoparticles on carbon

• fibers, taking advantage of the high internal surface area of carbon fiber paper. The pulsed laser-grafted composites exhibited zero measurable charge transfer resistance between gold nanoparticles and the carbon support, leading to superior cathode performance over conventionally prepared electrodes for

Recent advances in photothermal nanomaterials for ophthalmic applications

• Jiayuan Zhuang,
• Linhui Jia,
• Chenghao Li,
• Rui Yang,
• Jiapeng Wang,
• Wen-an Wang,
• Heng Zhou and
• Xiangxia Luo

Beilstein J. Nanotechnol. 2025, 16, 195–215, doi:10.3762/bjnano.16.16

• PAI contrast agents [195][196]. Gold nanorods [197], gold nanostars [198], hollow gold nanocages [199], chains of gold nanoparticles [200], and ultraminiature chain-like gold nanoparticle clusters [201] have been used for the detection of ocular structures such as retinal blood vessels, choroidal

Biomimetic nanocarriers: integrating natural functions for advanced therapeutic applications

• Hugo Felix Perini,
• Beatriz Sodré Matos,
• Carlo José Freire de Oliveira and
• Marcos Vinicius da Silva

Beilstein J. Nanotechnol. 2024, 15, 1619–1626, doi:10.3762/bjnano.15.127

• neuronal mitochondria, as evidenced by fluorescence intensities identified in brain homogenates, and reduced Aβ1 deposition, demonstrating the ability of the nanocomposite to cross the BBB [71]. Inorganic nanoparticles exhibit unique optical, magnetic, and chemical properties and stability. Gold

• nanoparticles (AuNPs) with polyoxometalate and the peptides POMD and LPFFD (AuNPs@POMD-pep) have shown inhibition of Aβ1 aggregation and Aβ-induced cytotoxicity. However, the inherent toxicity of this formulation, challenges in particle digestion, and the potential for triggering immune reactions remain

Facile synthesis of size-tunable L-carnosine-capped silver nanoparticles and their role in metal ion sensing and catalytic degradation of p-nitrophenol

• Akash Kumar,
• Ridhima Chadha,
• Abhishek Das,
• Nandita Maiti and
• Rayavarapu Raja Gopal

Beilstein J. Nanotechnol. 2024, 15, 1576–1592, doi:10.3762/bjnano.15.124

• al., where different shapes of gold nanoparticles had varying efficiencies in the catalytic degradation of nitrophenol compounds, with spherical nanoparticles being highly effective [48]. Kinetic analysis was performed based on pseudo-first-order reaction kinetics for the concentration of 0.25 mM P

Nanoarchitectonics with cetrimonium bromide on metal nanoparticles for linker-free detection of toxic metal ions and catalytic degradation of 4-nitrophenol

• Akash Kumar and
• Raja Gopal Rayavarapu

Beilstein J. Nanotechnol. 2024, 15, 1312–1332, doi:10.3762/bjnano.15.106

• -capped gold nanoparticles within 60 min of the reaction in the presence of thiosulfate [27]. The study concluded that nanoparticles of 13 nm can efficiently catalyze the reaction from 4-nitrophenol to 4-aminophenol [27]. A number of studies confirmed that linker-dependent detection and catalytic

• of C–N+ affected by the metal surface, as described by Nikoobakht and El-Sayed for CTAB-capped gold nanoparticles [43]. The singlet at 730 cm−1 for parent (powder) CTAB and CTAB-capped nanoparticles is due to CH2 rocking. The broad band at 3390 cm−1 in parent CTAB corresponds to N–H stretching, which

• structure of the synthesized silver and gold nanoparticles, silver and gold nanospheres capped with CTAB were measured with XRD (Figure 2e). The most common crystal structure of gold and silver in nanoparticles is face-centered cubic (FCC). In the XRD pattern of FCC CTAB-AuNS, we observe major diffraction

Enhanced catalytic reduction through in situ synthesized gold nanoparticles embedded in glucosamine/alginate nanocomposites

• Chi-Hien Dang,
• Le-Kim-Thuy Nguyen,
• Minh-Trong Tran,
• Van-Dung Le,
• Nguyen Minh Ty,
• T. Ngoc Han Pham,
• Hieu Vu-Quang,
• Tran Thi Kim Chi,
• Tran Thi Huong Giang,
• Nguyen Thi Thanh Tu and
• Thanh-Danh Nguyen

Beilstein J. Nanotechnol. 2024, 15, 1227–1237, doi:10.3762/bjnano.15.99

• synthesizing gold nanoparticles (AuNPs) within a glucosamine/alginate (GluN/Alg) nanocomposite via an ionotropic gelation mechanism in aqueous environment. The resulting nanocomposite, AuNPs@GluN/Alg, underwent thorough characterization using UV–vis, EDX, FTIR, SEM, TEM, SAED, and XRD analyses. The spherical

• nanocomposite as a versatile catalyst with promising applications across various industrial sectors. Keywords: catalysis; gold nanoparticles; organic dyes; organometallic nanocomposites; reduction; Introduction Gold nanoparticles (AuNPs) have garnered significant attention because of their exceptional

• the surface of the gold nanoparticles. Additionally, the polysaccharides can interact with functional groups within the dye structure, further influencing the adsorption/desorption dynamics of organic dyes on the surface of the AuNPs [44]. Regarding the reaction kinetics, the plots depicting ln(Ct/C0

Unveiling the potential of alginate-based nanomaterials in sensing technology and smart delivery applications

• Shakhzodjon Uzokboev,
• Khojimukhammad Akhmadbekov,
• Ra’no Nuritdinova,
• Salah M. Tawfik and
• Yong-Ill Lee

Beilstein J. Nanotechnol. 2024, 15, 1077–1104, doi:10.3762/bjnano.15.88

• detecting H2O2. The researchers obtained broad linearity between 5 and 1000 M H2O2, a low limit of detection (LOD) of 1.0 M, good accuracy (3.5%), recovery (95–105%), and high selectivity. Gold nanoparticles loaded on a hydrogel based on alginate (Alg) and poly(3,4-ethylenedioxythiophene) showed excellent

A review on the structural characterization of nanomaterials for nano-QSAR models

• Salvador Moncho,
• Eva Serrano-Candelas,
• Jesús Vicente de Julián-Ortiz and
• Rafael Gozalbes

Beilstein J. Nanotechnol. 2024, 15, 854–866, doi:10.3762/bjnano.15.71

• of metal and oxygen atoms as descriptors in metal oxide models [15][16]. It is also common to find single-element descriptors based on the physicochemical properties of pure elements. The use of single-element descriptors is trivial in single-metal nanoforms, such as silver or gold nanoparticles [17

Gold nanomakura: nanoarchitectonics and their photothermal response in association with carrageenan hydrogels

• Nabojit Das,
• Vikas,
• Akash Kumar,
• Sanjeev Soni and
• Raja Gopal Rayavarapu

Beilstein J. Nanotechnol. 2024, 15, 678–693, doi:10.3762/bjnano.15.56

• hydrogels is not well reported. In this study, nanomakura-shaped anisotropic gold nanoparticles (AuNMs) were synthesized via a surfactant-assisted seed-mediated protocol. Quaternary cationic surfactants having variable carbon tail length (n = 16, 14, 12) were used as capping for tuning the plasmon peak of

• . Plasmon resonance in spherical nanoparticles can be stretched over a relatively small wavelength range by changing the diameter, whereas casting anisotropy serves an extra degree of freedom for controlling the plasmon band over a range of visible to infrared (IR) spectrum [4]. Gold nanoparticles are well

• anisotropic gold nanoparticles (AuNPs) have been synthesized and studied in recent years including nanorings, nanoprisms, nanoplates, crooked nanorods, dendrimers, nanocubes, nanodumbells, dogbones, and nanomakura [7][8][9][10][11][12][13][14]. Vis-à-vis to spherical nanoparticles, anisotropic nanoparticles

Laser synthesis of nanoparticles in organic solvents – products, reactions, and perspectives

• Theo Fromme,
• Sven Reichenberger,
• Katharine M. Tibbetts and
• Stephan Barcikowski

Beilstein J. Nanotechnol. 2024, 15, 638–663, doi:10.3762/bjnano.15.54

Potential of a deep eutectic solvent in silver nanoparticle fabrication for antibiotic residue detection

• Le Hong Tho,
• Bui Xuan Khuyen,
• Ngoc Xuan Dat Mai and
• Nhu Hoa Thi Tran

Beilstein J. Nanotechnol. 2024, 15, 426–434, doi:10.3762/bjnano.15.38

• thermal stability, high polarity, low vapor pressure, and low toxicity, which makes DESs promising candidates for the replacement of thousands of industrial solvents [24][25]. DESs are so versatile that they have been used for nanomaterials synthesis [26][27]. Regarding plasmonic materials, gold

• nanoparticles (Au NPs) were the first to be fabricated in DESs [28][29]. SERS platforms based on Au NPs-DES whose sensitivity and durability are competitive to the other materials were successfully constructed [29][30]. However, no attention has been paid to the potential of DESs in the fabrication of Ag NPs

Classification and application of metal-based nanoantioxidants in medicine and healthcare

• Nguyen Nhat Nam,
• Nguyen Khoi Song Tran,
• Tan Tai Nguyen,
• Nguyen Ngoc Trai,
• Nguyen Phuong Thuy,
• Hoang Dang Khoa Do,
• Nhu Hoa Thi Tran and
• Kieu The Loan Trinh

Beilstein J. Nanotechnol. 2024, 15, 396–415, doi:10.3762/bjnano.15.36

• the conjugation of gold nanoparticles (AuNPs) with an anti-epithelial sodium channel (ENaC), known as a marker for arterial hypertension found in membrane platelets [186]. Beyond nanotechnology, the field has witnessed developments in metallic biomaterials for vascular tissue engineering. Titanium

In situ optical sub-wavelength thickness control of porous anodic aluminum oxide

• Aleksandrs Dutovs,
• Raimonds Popļausks,
• Oskars Putāns,
• Vladislavs Perkanuks,
• Aušrinė Jurkevičiūtė,
• Tomas Tamulevičius,
• Uldis Malinovskis,
• Iryna Olyshevets,
• Donats Erts and
• Juris Prikulis

Beilstein J. Nanotechnol. 2024, 15, 126–133, doi:10.3762/bjnano.15.12

• zinc oxide nanorods embedded within the PAAO template [13]. Recently, it was demonstrated that the PAAO thickness tuning can increase the signal intensity and refractometric sensitivity of localized surface plasmon resonance (LSPR) sensors constructed using gold nanoparticles, which are deposited on

Influence of conductive carbon and MnCo₂O₄ on morphological and electrical properties of hydrogels for electrochemical energy conversion

• Sylwia Pawłowska,
• Karolina Cysewska,
• Yasamin Ziai,
• Jakub Karczewski,
• Piotr Jasiński and
• Sebastian Molin

Beilstein J. Nanotechnol. 2024, 15, 57–70, doi:10.3762/bjnano.15.6

• appropriate electrical conductivity [22]. Suspension of conductive fillers in the hydrogel structure, such as metallic particles (gold nanoparticles, silver nanoparticles) [23][24][25], carbon-based materials (GO graphene oxide, CNT carbon nanotubes) [26][27][28], and conductive polymers (polyaniline

Curcumin-loaded nanostructured systems for treatment of leishmaniasis: a review

• Douglas Dourado,
• Thayse Silva Medeiros,
• Éverton do Nascimento Alencar,
• Edijane Matos Sales and
• Fábio Rocha Formiga

Beilstein J. Nanotechnol. 2024, 15, 37–50, doi:10.3762/bjnano.15.4

• [116][117]. Current studies have directed the use of metallic nanoparticles such as silver and gold nanoparticles against Leishmania sp. [118]. As silver and gold nanoparticles can produce reactive oxygen species (ROS) and Leishmania is known to be extremely sensitive to these compounds, these have

• curc-coated gold nanoparticles (curc-AuNPs) against L. major [125]. The NPs showed spherical morphology, particle size of 22 nm, and adequate polydispersity. Curc-AuNPs revealed IC50 values against L. major promastigotes of 64.79 μg/mL and 29.89 μg/mL in 24 h and 48 h, respectively. Additionally, they

Nanotechnological approaches in the treatment of schistosomiasis: an overview

• Lucas Carvalho,
• Michelle Sarcinelli and
• Beatriz Patrício

Beilstein J. Nanotechnol. 2024, 15, 13–25, doi:10.3762/bjnano.15.2

• ]. Therefore, metallic nanoparticles also have a curative role against schistosomiasis. A possible explanation for this action was suggested by Dkhil et al. in their work with gold nanoparticles [27]. They suggested that their curative effects are due to antioxidant properties which confer the ability to

• ]. Mokbel et al. [59] showed that curcumin associated with a half-dose of PZQ and gold nanoparticles reduced the worm load in infected mice more than PZQ alone. This information is crucial since most side effects presented by patients who use PZQ could be avoided if there was a way to reduce the drug dose

• PZQ. El-Shorbagy et al. [34] showed that the treatment with gold nanoparticles decreased the granuloma index, but with less effectiveness in comparison to PZQ at concentrations of 2.5, and 1.25 µM/mL. Overall, the nanoparticles exhibited antioxidant effects in vitro. Toxicity tests Toxicity testing is

A combined gas-phase dissociative ionization, dissociative electron attachment and deposition study on the potential FEBID precursor [Au(CH₃)₂Cl]₂

• Elif Bilgilisoy,
• Ali Kamali,
• Thomas Xaver Gentner,
• Gerd Ballmann,
• Sjoerd Harder,
• Hans-Peter Steinrück,
• Hubertus Marbach and
• Oddur Ingólfsson

Beilstein J. Nanotechnol. 2023, 14, 1178–1199, doi:10.3762/bjnano.14.98

• between the (111) planes of a face-centered cubic (FCC) gold nanoparticle [39][40]. The crystallinity of the gold nanoparticles was also investigated by using selected area electron diffraction (SAED) pattern shown in Figure 2c. The relatively bright circular patterns indicate polycrystallinity of the

• , as is clearly discernible from Figure 3b when comparing deposition at a beam current of 1.5 and 3 nA. For detailed particle analysis, the ImageJ software [35] was used to obtain the numbers of nanoparticles and their mean diameter. As mentioned before, the observed gold nanoparticles (Figure 1d) have

• % when comparing the depositions at 0.4 and 1.5 nA. We thus attribute the observed size reduction of the deposited gold particles with increasing deposition current to the decrease in carbon content. A similar size reduction of gold nanoparticles has been reported for post-deposition oxidative

Nanoarchitectonics of photothermal materials to enhance the sensitivity of lateral flow assays

• Elangovan Sarathkumar,
• Rajasekharan S. Anjana and
• Ramapurath S. Jayasree

Beilstein J. Nanotechnol. 2023, 14, 988–1003, doi:10.3762/bjnano.14.82

• assays (LFAs) are currently the most widely used point-of-care testing technique with remarkable advantages such as simple operation, rapid analysis, portability, and low cost. Traditionally, gold nanoparticles are employed as tracer element in LFAs due to their strong localised surface plasmon resonance

• different parts, namely sample pad, conjugate pad, nitrocellulose membrane, and adsorbent pad, maintaining a smooth flow of reagents through the LFA membrane. In the presence of a sample, the analyte initially reacts with affinity molecules, commonly antibodies linked with tracers such as gold nanoparticles

• , before being captured by immobilized biomolecules on a test line in the nitrocellulose membrane [6][7]. In conventional LFAs, most commonly gold nanoparticles and coloured cellulose nanobeads have been used as tracer elements because of strong light absorption and surface plasmon resonance, which yield

Antibody-conjugated nanoparticles for target-specific drug delivery of chemotherapeutics

• Mamta Kumari,
• Amitabha Acharya and
• Praveen Thaggikuppe Krishnamurthy

Beilstein J. Nanotechnol. 2023, 14, 912–926, doi:10.3762/bjnano.14.75

• Herceptin® to improve cellular uptake and cytotoxicity in breast cancer cells [41]. Similarly, Rayavarapu et al. conjugated HER2 antibodies on the surface of gold nanoparticles using a noncovalent conjugation method in order to increase intracellular uptake into cancer cells [42]. The adsorption results