Advanced atomic force microscopy techniques V

• Philipp Rahe,
• Ilko Bald,
• Nadine Hauptmann,
• Regina Hoffmann-Vogel,
• Harry Mönig and
• Michael Reichling

Beilstein J. Nanotechnol. 2025, 16, 54–56, doi:10.3762/bjnano.16.6

• meetings on atomic force microscopy (AFM), the 23rd International Conference on Non-Contact Atomic Force Microscopy (NC-AFM) held in Nijmegen (Netherlands) and the 6th International Workshop on Advanced Atomic Force Microscopy Techniques held in Potsdam (Germany). The strong advance in the field and the

Signal generation in dynamic interferometric displacement detection

• Knarik Khachatryan,
• Simon Anter,
• Michael Reichling and
• Alexander von Schmidsfeld

Beilstein J. Nanotechnol. 2024, 15, 1070–1076, doi:10.3762/bjnano.15.87

• highly stable interferometer can detect displacements with an accuracy far beyond nanometer resolution [3], where the final physical limit is set by the photon emission statistics of the light source [4]. In non-contact atomic force microscopy (NC-AFM), interferometry is used to measure the periodic

Stiffness calibration of qPlus sensors at low temperature through thermal noise measurements

• Laurent Nony,
• Sylvain Clair,
• Daniel Uehli,
• Aitziber Herrero,
• Jean-Marc Themlin,
• Andrea Campos,
• Franck Para,
• Alessandro Pioda and
• Christian Loppacher

Beilstein J. Nanotechnol. 2024, 15, 580–602, doi:10.3762/bjnano.15.50

• University, CNRS, Centrale Marseille, FSCM (FR1739), CP2M, 13397 Marseille, France 10.3762/bjnano.15.50 Abstract Non-contact atomic force microscopy (nc-AFM) offers a unique experimental framework for topographical imaging of surfaces with atomic and/or sub-molecular resolution. The technique also permits

• ; thermal noise; ultrahigh vacuum; Introduction Since the 2000s, non-contact atomic force microscopy (nc-AFM) has established itself as a scanning probe method for the topographical, chemical, and electrical mapping of the surface of a sample down to the atomic scale [1][2][3]. When used in an ultrahigh

Studies of probe tip materials by atomic force microscopy: a review

• Ke Xu and
• Yuzhe Liu

Beilstein J. Nanotechnol. 2022, 13, 1256–1267, doi:10.3762/bjnano.13.104

• a homemade cantilevered non-contact atomic force microscopy (NC-AFM) system. As the first step of tip sharpening, the focus is on the controlled extraction of individual clusters. The experimental results show that controlled extraction of individual clusters induces a change in tip sharpness, which

Local stiffness and work function variations of hexagonal boron nitride on Cu(111)

• Abhishek Grewal,
• Yuqi Wang,
• Matthias Münks,
• Klaus Kern and
• Markus Ternes

Beilstein J. Nanotechnol. 2021, 12, 559–565, doi:10.3762/bjnano.12.46

• non-contact atomic force microscopy (nc-AFM) to study h-BN on Cu(111). This template has interesting properties because the dielectric layer is only very weakly bound to the metal and shows an electronically induced Moiré superstructure [25][26]. First STM studies on this system pointed to only a

Reconstruction of a 2D layer of KBr on Ir(111) and electromechanical alteration by graphene

• Zhao Liu,
• Antoine Hinaut,
• Stefan Peeters,
• Sebastian Scherb,
• Ernst Meyer,
• Maria Clelia Righi and
• Thilo Glatzel

Beilstein J. Nanotechnol. 2021, 12, 432–439, doi:10.3762/bjnano.12.35

• with unconventional stoichiometries have been observed indirectly on graphene surfaces [37]. Here, we report on the formation of irregularly shaped KBr islands with corrugated stripe structures, observed on the (111) surface of Ir and analyzed by non-contact atomic force microscopy (nc-AFM) at room

Protruding hydrogen atoms as markers for the molecular orientation of a metallocene

• Linda Laflör,
• Michael Reichling and
• Philipp Rahe

Beilstein J. Nanotechnol. 2020, 11, 1432–1438, doi:10.3762/bjnano.11.127

• acid (FDCA) molecules on bulk and thin film CaF2(111) surfaces with non-contact atomic force microscopy (NC-AFM). We use NC-AFM image calculations with the probe particle model to interpret this distinct shape by repulsive interactions between the NC-AFM tip and the top hydrogen atoms of the

• employed for the investigation of both ordered and unordered molecular systems as well as of individual and isolated species [4][5][6]. For example, two different non-planar isomers of dibenzo[a,h]thianthrene molecules could be identified by high-resolution non-contact atomic force microscopy (NC-AFM) [7

Atomic defect classification of the H–Si(100) surface through multi-mode scanning probe microscopy

• Jeremiah Croshaw,
• Thomas Dienel,
• Taleana Huff and
• Robert Wolkow

Beilstein J. Nanotechnol. 2020, 11, 1346–1360, doi:10.3762/bjnano.11.119

• Nanotechnology Research Centre, National Research Council Canada, Edmonton, Alberta, T6G 2M9, Canada 10.3762/bjnano.11.119 Abstract The combination of scanning tunnelling microscopy (STM) and non-contact atomic force microscopy (nc-AFM) allows enhanced extraction and correlation of properties not readily

• same side of two neighbouring dimers. Subsequently, the latter had been reassigned as an H, OH pair originating from dissociative attachment of a residual water molecule in the vacuum system [15][16][17]. Further insights became available by non-contact atomic force microscopy (nc-AFM), separating the

Measurement of electrostatic tip–sample interactions by time-domain Kelvin probe force microscopy

• Christian Ritz,
• Tino Wagner and
• Andreas Stemmer

Beilstein J. Nanotechnol. 2020, 11, 911–921, doi:10.3762/bjnano.11.76

• Kalman filter; Kelvin probe force microscopy (KFM); time domain; Introduction Electrostatic forces are important interactions in non-contact atomic force microscopy (NC-AFM). They arise from differences in the work function of the tip and the sample, from trapped charges, or from potentials applied to

Atomic-resolution imaging of rutile TiO₂(110)-(1 × 2) reconstructed surface by non-contact atomic force microscopy

• Daiki Katsube,
• Shoki Ojima,
• Eiichi Inami and
• Masayuki Abe

Beilstein J. Nanotechnol. 2020, 11, 443–449, doi:10.3762/bjnano.11.35

• clean surface is relatively easy. A well-known rutile TiO2(110) surface is the (1 × 1) structure [2]. The (1 × 1) surface has been studied using low-energy electron diffraction (LEED) [3][4], surface X-ray diffraction [5], non-contact atomic force microscopy (NC-AFM) [6][7][8][9], scanning tunneling

Comparing a porphyrin- and a coumarin-based dye adsorbed on NiO(001)

• Sara Freund,
• Antoine Hinaut,
• Nathalie Marinakis,
• Edwin C. Constable,
• Ernst Meyer,
• Catherine E. Housecroft and
• Thilo Glatzel

Beilstein J. Nanotechnol. 2019, 10, 874–881, doi:10.3762/bjnano.10.88

• -carboxyphenyl)porphyrin (Cu-TCPP) has been studied for the fabrication of n-type DSSCs [21][22]. In contrast, Coumarin 343 (C343) is an electron acceptor and is used for the design of p-type devices [23][24]. Both molecules structures are shown in Figure 1b. In this paper, non-contact atomic force microscopy

• (nc-AFM) is used at room temperature (RT) to compare the properties of the two dyes deposited on a NiO(001) single-crystal surface. Under ultrahigh vacuum (UHV) conditions, the adsorption modes of both molecules on the surface of NiO(001) are studied and their charge state upon adsorption are

Combined pulsed laser deposition and non-contact atomic force microscopy system for studies of insulator metal oxide thin films

• Daiki Katsube,
• Hayato Yamashita,
• Satoshi Abo and
• Masayuki Abe

Beilstein J. Nanotechnol. 2018, 9, 686–692, doi:10.3762/bjnano.9.63

• a combined system of pulsed laser deposition (PLD) and non-contact atomic force microscopy (NC-AFM) for observations of insulator metal oxide surfaces. With this system, the long-period iterations of sputtering and annealing used in conventional methods for preparing a metal oxide film surface are

• transmission electron microscopy [5][8][9][10][11][12][13]. As atomic resolution methods, scanning probe microscopy including scanning tunneling microscopy (STM) [13][14][15][16][17][18][19][20][21][22][23][24][25][26][27][28][29][30] and non-contact atomic force microscopy (NC-AFM) [19][23][29][31][32][33][34

Anchoring of a dye precursor on NiO(001) studied by non-contact atomic force microscopy

• Sara Freund,
• Antoine Hinaut,
• Nathalie Marinakis,
• Edwin C. Constable,
• Ernst Meyer,
• Catherine E. Housecroft and
• Thilo Glatzel

Beilstein J. Nanotechnol. 2018, 9, 242–249, doi:10.3762/bjnano.9.26

• lie between 3.5 and 4.3 eV [25][26][27][28][29], and given that scanning tunnelling microscopy (STM) can only be performed on thin NiO films grown on metals [30][31], non-contact atomic force microscopy (nc-AFM) in ultra-high vacuum is the technique of choice. Due to its hardness and high reactivity

Optimizing qPlus sensor assemblies for simultaneous scanning tunneling and noncontact atomic force microscopy operation based on finite element method analysis

• Omur E. Dagdeviren and
• Udo D. Schwarz

Beilstein J. Nanotechnol. 2017, 8, 657–666, doi:10.3762/bjnano.8.70

• ; noncontact atomic force microscopy; quartz tuning forks; scanning tunneling microscopy; self-sensing probe; Introduction Scanning tunneling microscopy (STM) [1] and non-contact atomic force microscopy (NC-AFM) [1][2][3] are powerful methods allowing the visualization of the atomic structure of a surface

Noise in NC-AFM measurements with significant tip–sample interaction

• Jannis Lübbe,
• Matthias Temmen,
• Philipp Rahe and
• Michael Reichling

Beilstein J. Nanotechnol. 2016, 7, 1885–1904, doi:10.3762/bjnano.7.181

• & Astronomy, The University of Nottingham, University Park, Nottingham NG7 2RD, UK 10.3762/bjnano.7.181 Abstract The frequency shift noise in non-contact atomic force microscopy (NC-AFM) imaging and spectroscopy consists of thermal noise and detection system noise with an additional contribution from

• : amplitude noise; cantilever stiffness; closed loop; detection system noise; frequency shift noise; non-contact atomic force microscopy (NC-AFM); Q-factor; spectral analysis; thermal noise; tip–sample interaction; Introduction Non-contact atomic force microscopy (NC-AFM) [1][2] is an unmatched surface

Modelling of ‘sub-atomic’ contrast resulting from back-bonding on Si(111)-7×7

• Adam Sweetman,
• Samuel P. Jarvis and
• Mohammad A. Rashid

Beilstein J. Nanotechnol. 2016, 7, 937–945, doi:10.3762/bjnano.7.85

• force mapping of atomic and molecular structures using non-contact atomic force microscopy (NC-AFM). In particular, suppressing the chemical bonding between tip and sample enables the stable exploration of the repulsive part of the tip–sample force regime, which has allowed outstanding resolution to be

Virtual reality visual feedback for hand-controlled scanning probe microscopy manipulation of single molecules

• Philipp Leinen,
• Matthew F. B. Green,
• Taner Esat,
• Christian Wagner,
• F. Stefan Tautz and
• Ruslan Temirov

Beilstein J. Nanotechnol. 2015, 6, 2148–2153, doi:10.3762/bjnano.6.220

• advantages of the set-up are demonstrated by applying it to the model problem of the extraction of an individual PTCDA molecule from its hydrogen-bonded monolayer grown on Ag(111) surface. Keywords: non-contact atomic force microscopy (NC-AFM); Oculus Rift; perylene-3,4,9,10-tetracarboxylic dianhydride

Magnetic properties of self-organized Co dimer nanolines on Si/Ag(110)

• Lisa Michez,
• Kai Chen,
• Fabien Cheynis,
• Frédéric Leroy,
• Alain Ranguis,
• Haik Jamgotchian,
• Margrit Hanbücken and
• Laurence Masson

Beilstein J. Nanotechnol. 2015, 6, 777–784, doi:10.3762/bjnano.6.80

• ]. We note that these protrusions are too large to represent individual atoms. We have recently shown that neither STM nor non-contact atomic force microscopy (nc-AFM) probes can straightforwardly resolve the inner atomic structure of the Si NRs [25]. All NRs, varying only in length, present the same

Uncertainties in forces extracted from non-contact atomic force microscopy measurements by fitting of long-range background forces

• Adam Sweetman and
• Andrew Stannard

Beilstein J. Nanotechnol. 2014, 5, 386–393, doi:10.3762/bjnano.5.45

• Adam Sweetman Andrew Stannard The School of Physics and Astronomy, The University of Nottingham, Nottingham, NG7 2RD, U.K. 10.3762/bjnano.5.45 Abstract In principle, non-contact atomic force microscopy (NC-AFM) now readily allows for the measurement of forces with sub-nanonewton precision on the

• extrapolation method. Keywords: background subtraction; DFM; F(z); force; atomic resolution; NC-AFM; Si(111); STM; van der Waals; Introduction Non-contact atomic force microscopy (NC-AFM) is now the tool of choice for surface scientists wishing to investigate interatomic and intermolecular forces on surfaces

Effect of contaminations and surface preparation on the work function of single layer MoS₂

• Oliver Ochedowski,
• Kolyo Marinov,
• Nils Scheuschner,
• Artur Poloczek,
• Benedict Kleine Bussmann,
• Janina Maultzsch and
• Marika Schleberger

Beilstein J. Nanotechnol. 2014, 5, 291–297, doi:10.3762/bjnano.5.32

• measurements were performed under ambient conditions using amplitude modulated KPFM, both having a great impact on the results. In this work we study the work function of SLM on a standard SiO2/Si substrate using non-contact atomic force microscopy (NC-AFM) and Kelvin probe force microscopy in situ. In our

Routes to rupture and folding of graphene on rough 6H-SiC(0001) and their identification

• M. Temmen,
• O. Ochedowski,
• B. Kleine Bussmann,
• M. Schleberger,
• M. Reichling and
• T. R. J. Bollmann

Beilstein J. Nanotechnol. 2013, 4, 625–631, doi:10.3762/bjnano.4.69

• mechanically exfoliated under ambient conditions on 6H-SiC(0001) are modified by (i) swift heavy ion (SHI) irradiation, (ii) by a force microscope tip and (iii) by severe heating. The resulting surface topography and the surface potential are investigated with non-contact atomic force microscopy (NC-AFM) and

• ) measured by KPFM. Keywords: graphene; Kelvin probe force microscopy (KPFM), local contact potential difference (LCPD); non-contact atomic force microscopy (NC-AFM); SiC; Introduction Since its discovery in 2004 [1], graphene, the 2D crystal with a honeycomb lattice of sp2-bonded carbon atoms, has been

• different BLG stackings, we investigate the topography by non-contact atomic force microscopy (NC-AFM) combined with measuring the local contact potential differences (LCPD) using Kelvin probe force microscopy (KPFM). Experimental Graphene is exfoliated from a HOPG crystal (Momentive Performance Materials

Oriented growth of porphyrin-based molecular wires on ionic crystals analysed by nc-AFM

• Thilo Glatzel,
• Lars Zimmerli,
• Shigeki Kawai,
• Ernst Meyer,
• Leslie-Anne Fendt and
• Francois Diederich

Beilstein J. Nanotechnol. 2011, 2, 34–39, doi:10.3762/bjnano.2.4

• studies by non-contact atomic force microscopy (nc-AFM) were done on ionic crystals with adsorbed PTCDA [17][18][19][20][21][22], PTCDI [23] or C60 [24]. In the case of porphyrins, the growth [25][26][27] and electronic properties [28] of stable, monolayered molecular wires on KBr(001) with a length of up

Defects in oxide surfaces studied by atomic force and scanning tunneling microscopy

• Thomas König,
• Georg H. Simon,
• Lars Heinke,
• Leonid Lichtenstein and
• Markus Heyde

Beilstein J. Nanotechnol. 2011, 2, 1–14, doi:10.3762/bjnano.2.1

• defects in oxide surfaces was studied by non-contact atomic force microscopy (NC-AFM) and scanning tunneling microscopy (STM). Furthermore, the contact potential was determined by Kelvin probe force microscopy (KPFM). This technique has a high spatial resolution, thus avoiding averaging over various

Tip-sample interactions on graphite studied using the wavelet transform

• Giovanna Malegori and
• Gabriele Ferrini

Beilstein J. Nanotechnol. 2010, 1, 172–181, doi:10.3762/bjnano.1.21

• oscillations of a cantilever with an interacting tip. This analysis allows to retrieve the force gradients, the forces and the Hamaker constant in a measurement time of less than 40 ms. Keywords: AFM; force; graphite; thermal excitation; wavelet transforms; Introduction The non-contact atomic force

• microscopy (NC-AFM) is a powerful tool to study not only the surface topography, but also the mechanical and chemical characteristics of the sample at the nanoscale [1][2][3]. The tip of an excited cantilever is sensitive to both forces and force gradients, when approaching the sample surface. The response