Deep-blue emitting 9,10-bis(perfluorobenzyl)anthracene

• Long K. San,
• Sebastian Balser,
• Brian J. Reeves,
• Tyler T. Clikeman,
• Yu-Sheng Chen,
• Steven H. Strauss and
• Olga V. Boltalina

Beilstein J. Org. Chem. 2025, 21, 515–525, doi:10.3762/bjoc.21.39

• photostability compared to ANTH and 9,10-ANTH derivatives, and a simple synthetic access makes it an attractive material as a deep-blue OLED emitter and an efficient fluorescent probe. Keywords: anthracene; dibromoanthracene; electron poor polyaromatic systems; fluorescence; perfluoroalkylation

• emitters for organic light emitting diodes (OLEDs) [4][5][6][7][8]. More recently, an increased interest in the studies of triplet–triplet annihilation mechanisms in anthracene emitter materials [9] and the design of efficient OLED emitters based on hyperfluorescence [10][11], which could exhibit high

• -purity color and improved stability, has been observed. OLED materials have attracted considerable research because they found commercial uses for flat panel displays and solid-state lighting applications. Currently, the design of efficient and highly stable blue fluorescent emitters remains a challenge

Unraveling aromaticity: the dual worlds of pyrazole, pyrazoline, and 3D carborane

• Zahra Noori,
• Miquel Solà,
• Clara Viñas,
• Francesc Teixidor and
• Jordi Poater

Beilstein J. Org. Chem. 2025, 21, 412–420, doi:10.3762/bjoc.21.29

• photoinduced electron transfer [8][9]. Thanks to their notable photophysical properties, pyrazoles are applied in OLED technology [10]. Noticeably, in its ground state, pyrazole (C3H4N2) is an aromatic molecule that follows Hückel's rule, with two formal double bonds and a lone pair on one nitrogen generating

Recent advances in organocatalytic atroposelective reactions

• Henrich Szabados and
• Radovan Šebesta

Beilstein J. Org. Chem. 2025, 21, 55–121, doi:10.3762/bjoc.21.6

• carbazole 223 or indole 225. The reactions provided excellent enantioselectivities and good yields and the best results were achieved with methyl or chlorine substituents in position 3 of the naphthyl ring. Dicarbazoles are generally useful as OLED materials [97]. For this reason, the authors decided to

N-Glycosides of indigo, indirubin, and isoindigo: blue, red, and yellow sugars and their cancerostatic activity

• Peter Langer

Beilstein J. Org. Chem. 2024, 20, 2840–2869, doi:10.3762/bjoc.20.240

• ][9][10]. In this context, the best CDK2 inhibitory activities were observed for indirubin-derived oximes [11]. Yellow colored isoindigo received a lot of attention as constituent of polymers applied as semi-conducting materials, organic light emitting materials (OLED), and for related applications

Multicomponent syntheses of pyrazoles via (3 + 2)-cyclocondensation and (3 + 2)-cycloaddition key steps

• Ignaz Betcke,
• Alissa C. Götzinger,
• Maryna M. Kornet and
• Thomas J. J. Müller

Beilstein J. Org. Chem. 2024, 20, 2024–2077, doi:10.3762/bjoc.20.178

• ], pyrazoles also find applications in OLED technology [20] and optical brighteners [21] in the textile and laundry industry. The ongoing quest for novel, potent, and efficient syntheses of pyrazoles prompts the search for the “ideal” synthesis [22][23], one that addresses all the synthetic challenges to meet

Regioselective quinazoline C2 modifications through the azide–tetrazole tautomeric equilibrium

• Dāgs Dāvis Līpiņš,
• Andris Jeminejs,
• Una Ušacka,
• Anatoly Mishnev,
• Māris Turks and
• Irina Novosjolova

Beilstein J. Org. Chem. 2024, 20, 675–683, doi:10.3762/bjoc.20.61

• , finding use as anticancer, antimicrobial, antimalarial, and antiviral agents [1][2]. Furthermore, numerous 2-amino-6,7-dimethoxyquinazoline analogs are extensively employed as α1-adrenoceptor blockers [3][4]. In recent years quinazoline-based OLED materials have also gained attention showing great quantum

Aromatic systems with two and three pyridine-2,6-dicarbazolyl-3,5-dicarbonitrile fragments as electron-transporting organic semiconductors exhibiting long-lived emissions

• Karolis Leitonas,
• Brigita Vigante,
• Dmytro Volyniuk,
• Audrius Bucinskas,
• Pavels Dimitrijevs,
• Sindija Lapcinska,
• Pavel Arsenyan and
• Juozas Vidas Grazulevicius

Beilstein J. Org. Chem. 2023, 19, 1867–1880, doi:10.3762/bjoc.19.139

• small singlet–triplet splitting and a fair photoluminescence quantum yield (PLQY). The optimized organic light-emitting diode (OLED) based on 13 wt % CPC doped in 1,3-bis(9H-carbazol-9-yl)benzene (mCP) as host exhibited maximum current efficiency, power efficiency, and external quantum efficiency (EQE

• -3,5-dicarbonitriles substituted with 3,6-di-tert-butylcarbazole were successfully leveraged as TADF emitters in the fabrication of OLED with relatively high device life-times and a high EQEmax of 25% [7]. An effective green TADF was achieved for pyridine-3,5-dicarbonitriles with highly twisted

• the photocatalytic production of H2 while the nanospheres produced hydrogen peroxide (H2O2). The introduction of the additional carbazolylphenyl moiety in the CPC molecule [4] allowed us to improve the EQEmax of an OLED to 25% [7]. In continuation of our studies in the field of the development of new

Thienothiophene-based organic light-emitting diode: synthesis, photophysical properties and application

• Recep Isci and
• Turan Ozturk

Beilstein J. Org. Chem. 2023, 19, 1849–1857, doi:10.3762/bjoc.19.137

• triphenylamine as donor and dimesitylboron as acceptor linked through a thieno[3,2-b]thiophene (TT) π-conjugated linker bearing a 4-MeOPh group, was designed, synthesized, and fabricated as an emitter via a solution process for an organic light-emitting diode (OLED) application. DMB-TT-TPA (8) exhibited

• absorption. A solution-processed OLED was fabricated using low turn-on voltage, which had performances with maximum power, current, and external quantum efficiencies of 6.70 lm/W, 10.6 cd/A, and 4.61%, respectively. Keywords: OLED; organoboron; solution processes; thienothiophene; triphenylamine

• current efficiency of 10.6 cd/A, and maximum power efficiency of 6.70 lm/W. Results and Discussion Design and synthesis The OLED fluorophore, DMB-TT-TPA (8, Scheme 1), having a donor–π–acceptor (D–π–A) system, was synthesized according to our previously reported methods [20][21][22][23][36][38]. The

Quinoxaline derivatives as attractive electron-transporting materials

• Zeeshan Abid,
• Liaqat Ali,
• Sughra Gulzar,
• Faiza Wahad,
• Raja Shahid Ashraf and
• Christian B. Nielsen

Beilstein J. Org. Chem. 2023, 19, 1694–1712, doi:10.3762/bjoc.19.124

• strong dipole moments in Qx59 improves electron injection/extraction and energy level alignment, leading to enhanced device performance. The high PCE of 16.83% in OSC and excellent external quantum efficiency (EQE) of 5.00% in OLED devices highlight the efficacy of Qx59 in facilitating efficient charge

• indicated efficient charge transfer and exciton formation within the molecule, leading to red emission. The achieved EQE of 7.4% highlighted the potential application of this Qx-based TADF emitter as dopant in red-emitting OLED devices [65]. Huang et al. developed two yellow TADF emitters, Qx67 and Qx68

A deep-red fluorophore based on naphthothiadiazole as emitter with hybridized local and charge transfer and ambipolar transporting properties for electroluminescent devices

• Suangsiri Arunlimsawat,
• Patteera Funchien,
• Pongsakorn Chasing,
• Atthapon Saenubol,
• Taweesak Sudyoadsuk and
• Vinich Promarak

Beilstein J. Org. Chem. 2023, 19, 1664–1676, doi:10.3762/bjoc.19.122

• –donor (D–A–D)-type molecule and its application as a non-doped emitter in an organic light-emitting diode (OLED). The fluorophore TPECNz contains naphtho[2,3-c][1,2,5]thiadiazole (Nz) as a strong acceptor unit symmetrically functionalized with N-(4-(1,2,2-triphenylvinyl)phenyl)carbazole as a donor and

• ambipolar charge-carrier-transporting property with a decent balance of mobility of electrons (1.50 × 10−5 cm2 V−1 s−1) and holes (4.42 × 10−6 cm2 V−1 s−1). TPECNz is successfully employed as a non-doped emitter in an OLED which displays deep red electroluminescent emission peaked at 659 nm with CIE

• coordinates of (0.664, 0.335)), an EQEmax of 3.32% and exciton utilization efficiency (EUE) of 47%. Keywords: ambipolar material; deep red fluorophore; hybridized local and charge transfer; naphthothiadiazole; OLED; organic light-emitting diode; Introduction Recently, organic fluorophores with efficient

Organic thermally activated delayed fluorescence material with strained benzoguanidine donor

• Alexander C. Brannan,
• Elvie F. P. Beaumont,
• Nguyen Le Phuoc,
• George F. S. Whitehead,
• Mikko Linnolahti and
• Alexander S. Romanov

Beilstein J. Org. Chem. 2023, 19, 1289–1298, doi:10.3762/bjoc.19.95

• Abstract Organic thermally activated delayed fluorescence (TADF) materials have been widely investigated due to their impressive electronic properties and applied potential for the third generation of organic light-emitting diodes (OLED). We present organic TADF material (4BGIPN) based on the strained

• performance in OLED devices [1]. 4CzIPN is a donor–acceptor-type system where carbazole donor ligands are bound to the benzonitrile acceptor core moiety. In this work we have substituted the carbazole donors with 5H-benzo[d]benzo[4,5]imidazo[1,2-a]imidazole (benzoguanidine) ligands to give 4BGIPN, see Figure

• LUMO energy levels, along with multiple electron-withdrawing aza-nitrogen atoms in the structure of 4BGIPN, suggests its potential suitability as an electron transport layer in OLED (organic light-emitting diode) devices. Variable temperature photoluminescence studies revealed that 4BGIPN corresponds

The effect of dark states on the intersystem crossing and thermally activated delayed fluorescence of naphthalimide-phenothiazine dyads

• Liyuan Cao,
• Xi Liu,
• Xue Zhang,
• Jianzhang Zhao,
• Fabiao Yu and
• Yan Wan

Beilstein J. Org. Chem. 2023, 19, 1028–1046, doi:10.3762/bjoc.19.79

• ; electron donor; intersystem crossing; TADF; triplet state; Introduction Thermally activated delayed fluorescence (TADF) compounds are promising emitters to be used in organic light-emitting diodes (OLED) [1][2][3][4][5][6][7][8][9][10][11][12]. These emitters have the advantage of low cost and high

• may also enhance the rISC in OLED devices, in which the electron–hole recombination produces mainly the triplet state (the theoretical probability is 75%, by following the spin statistic rule) [1]. Compared to the application studies, the investigation of the photophysical mechanism of TADF emitters

• analogous dyads recently, however, the delayed fluorescence lifetimes were much longer (2.0–14.4 μs) as compared to the current dyads [47]. TADF emitters with shorter delayed fluorescence lifetimes are suitable for fabrication of OLED devices, to suppress the efficiency roll-off effect. The photophysical

Naphthalimide-phenothiazine dyads: effect of conformational flexibility and matching of the energy of the charge-transfer state and the localized triplet excited state on the thermally activated delayed fluorescence

• Kaiyue Ye,
• Liyuan Cao,
• Davita M. E. van Raamsdonk,
• Zhijia Wang,
• Jianzhang Zhao,
• Daniel Escudero and
• Denis Jacquemin

Beilstein J. Org. Chem. 2022, 18, 1435–1453, doi:10.3762/bjoc.18.149

• : charge-transfer; electron donor; intersystem crossing; TADF; triplet state; Introduction Thermally activated delayed fluorescence (TADF) has attracted much attention in recent years, not only for its application in organic light emitting diodes (OLED) [1][2][3] but also as a mean for studying of charge

Thermally activated delayed fluorescence (TADF) emitters: sensing and boosting spin-flipping by aggregation

• Ashish Kumar Mazumdar,
• Gyana Prakash Nanda,
• Nisha Yadav,
• Upasana Deori,
• Upasha Acharyya,
• Bahadur Sk and
• Pachaiyappan Rajamalli

Beilstein J. Org. Chem. 2022, 18, 1177–1187, doi:10.3762/bjoc.18.122

• metal-based emitters in organic light-emitting diode (OLED) devices [18]. Nevertheless, many TADF emitters suffer from quenching of the emission due to the aggregation-caused quenching effect [19][20]. The strong π–π-stacking interactions in the solid or aggregated state may lead to emission quenching

• upon exposure to TFA and TEA vapors. The current study helps to understand the enhancement of DF in the aggregated state, which is important for the fabrication of efficient OLED devices and reversible switching of fluorescence by acid–base exposure. (a) Normalized absorption spectra of BPy-pTC and BPy

Scope of tetrazolo[1,5-a]quinoxalines in CuAAC reactions for the synthesis of triazoloquinoxalines, imidazoloquinoxalines, and rhenium complexes thereof

• Laura Holzhauer,
• Chloé Liagre,
• Olaf Fuhr,
• Nicole Jung and
• Stefan Bräse

Beilstein J. Org. Chem. 2022, 18, 1088–1099, doi:10.3762/bjoc.18.111

• and OLED compounds [7][8][9]. Amongst many other possible ways to modify and extend the core structure of quinoxalines, the conversion of tetrazolo[1,5-a]quinoxalines offers several advantages, as tetrazolo[1,5-a]quinoxalines can be used as quinoxaline-azide precursor, serving as a precursor for new

• -diisopropylethylamine; OLED, organic-light emitting diode; SCE, saturated calomel electrode; TADF, thermally activated delayed fluorescence; TEMPO, 2,2,6,6-tetramethylpiperidinyloxyl; TIQ, triazoloimidazoquinoxaline. UV–vis absorption spectra of the obtained metal complexes (18 µM solutions) in acetonitrile at 20 °C

Post-synthesis from Lewis acid–base interaction: an alternative way to generate light and harvest triplet excitons

• Hengjia Liu and
• Guohua Xie

Beilstein J. Org. Chem. 2022, 18, 825–836, doi:10.3762/bjoc.18.83

• , delayed fluorescence profiles of the exciplexes were detected (see Figure 12c, τ1 = 57.07 ns and τ2 = 158.20 ns), which proved the possibility to harvest triplet excitons based on Lewis acid–base adducts. Therefore, the OLED using 35DCzPPy:B(C6F5)3 as the emitting layer exhibited a maximum external

Comparative study of thermally activated delayed fluorescent properties of donor–acceptor and donor–acceptor–donor architectures based on phenoxazine and dibenzo[a,j]phenazine

• Saika Izumi,
• Prasannamani Govindharaj,
• Anna Drewniak,
• Paola Zimmermann Crocomo,
• Satoshi Minakata,
• Leonardo Evaristo de Sousa,
• Piotr de Silva,
• Przemyslaw Data and
• Youhei Takeda

Beilstein J. Org. Chem. 2022, 18, 459–468, doi:10.3762/bjoc.18.48

• asymmetric D–A structure. Herein, we report the synthesis of a new asymmetric D–A compound 1 (Figure 1) as a TADF emitter and its detailed physical properties. Moreover, the developed emitter’s performance was evaluated in an OLED device. To clarify the influence of the donor number and structural symmetry

• of the DF process. The time-resolved spectroscopic analysis of the emitter (10 wt % 1) in an OLED matrix, 4,4’-bis(N-carbazolyl)-1,1’-biphenyl (CBP), revealed that the emission at 300 K yields a weaker DF when compared to the Zeonex® matrix (Figure 3c). In addition, the emission in CBP was more

• , where POZ-DBPHZ has the twice higher value which in total should give a much lower performance in the device for 1. Thermal stability To fabricate the OLED devices by thermal evaporation techniques, a high thermal stability is required. To evaluate the effect of the donor number on the thermal stability

Effect of a twin-emitter design strategy on a previously reported thermally activated delayed fluorescence organic light-emitting diode

• Ettore Crovini,
• Zhen Zhang,
• Yu Kusakabe,
• Yongxia Ren,
• Yoshimasa Wada,
• Bilal A. Naqvi,
• Prakhar Sahay,
• Tomas Matulaitis,
• Stefan Diesing,
• Ifor D. W. Samuel,
• Wolfgang Brütting,
• Katsuaki Suzuki,
• Hironori Kaji,
• Stefan Bräse and
• Eli Zysman-Colman

Beilstein J. Org. Chem. 2021, 17, 2894–2905, doi:10.3762/bjoc.17.197

• luminescence in an OLED is achieved through the radiative decay of electrically generated excitons, high-efficiency devices must be able to harvest both the 25% singlet and 75% triplet excitons to produce light [3]. Distinct from phosphorescent compounds, TADF molecules harvest triplet excitons by converting

• 100% IQE is just the first step toward an efficient OLED since the light needs to escape the device. A device is composed of a stack of several layers of organic semiconductor materials, each possessing different refractive indices, sandwiched between two electrodes. Depending on the angle of emission

• -emitter design are best illustrated by the cross-comparison of CzTRZ [20][21], a molecule that did not present any TADF and thus the OLED showed a low EQEmax of 5.8%, while the emitter, 33TCzTTrz [22], is TADF and the OLED showed a much superior EQEmax of 25.0%. There is a significant red-shift of the

Photophysical, photostability, and ROS generation properties of new trifluoromethylated quinoline-phenol Schiff bases

• Inaiá O. Rocha,
• Yuri G. Kappenberg,
• Wilian C. Rosa,
• Clarissa P. Frizzo,
• Nilo Zanatta,
• Marcos A. P. Martins,
• Isadora Tisoco,
• Bernardo A. Iglesias and
• Helio G. Bonacorso

Beilstein J. Org. Chem. 2021, 17, 2799–2811, doi:10.3762/bjoc.17.191

• interesting luminescent properties [14] that have attracted great interest because of their potential applicability in the composition of organic light-emitting diodes (OLED), organic solar cells (OSC), and biomolecular markers [15][16]. Moreover, the trifluoromethyl substituent (CF3) is an interesting

Recent advances in the asymmetric phosphoric acid-catalyzed synthesis of axially chiral compounds

• Alemayehu Gashaw Woldegiorgis and
• Xufeng Lin

Beilstein J. Org. Chem. 2021, 17, 2729–2764, doi:10.3762/bjoc.17.185

• pyrazolone-enol intermediates to the N–N double bonds of azonaphthalenes [70]. On the other hand, N-arylcarbazole frameworks are also abundant in pharmaceuticals, agrochemicals, natural products, and functional OLED materials [71][72]. Therefore, the construction of axially chiral N-arylcarbazoles is

• rearomatization-enabled central to axial chirality transfer pathway [73]. Citing the crucial role of di-carbazole-substituted arenes in OLED materials [74], Tan and co-workers have recently developed structural motifs with two chiral N-aryl axes from 2,6-diazonaphthalene 61 and carbazoles 62. For this reaction, a

Synthesis and investigation on optical and electrochemical properties of 2,4-diaryl-9-chloro-5,6,7,8-tetrahydroacridines

• Najeh Tka,
• Mohamed Adnene Hadj Ayed,
• Mourad Ben Braiek,
• Mahjoub Jabli and
• Peter Langer

Beilstein J. Org. Chem. 2021, 17, 2450–2461, doi:10.3762/bjoc.17.162

• their partially hydrogenated analogues, even though they were used as electron-donor groups for OLED applications [42][43]. On the other hand, tetrahydroacridines have received much attention in medicinal chemistry, due to their ability to inhibit topoisomerase enzymes and block the DNA transcription

Catalyzed and uncatalyzed procedures for the syntheses of isomeric covalent multi-indolyl hetero non-metallides: an account

• Ranadeep Talukdar

Beilstein J. Org. Chem. 2021, 17, 2102–2122, doi:10.3762/bjoc.17.137

• proved to not going via a Minisci-type silyl radical addition [55], as the reaction with pyridine did not afford any product. Bell studied the properties of such molecules which are similar to those used in OLED devices (organic light emitting diodes) in 2017. The molecule 34 was synthesized by base

Recent advances in the syntheses of anthracene derivatives

• Giovanni S. Baviera and
• Paulo M. Donate

Beilstein J. Org. Chem. 2021, 17, 2028–2050, doi:10.3762/bjoc.17.131

• [11][12], the 2,2’-bianthracene derivative 3 provides a green and fluorescent OLED [13], 2,2’-bianthracenyl (4) has been employed as an organic semiconductor in an OFET device [14], and di-n-alkoxyanthracenes have gelling properties with diverse solvents, mainly alkanes and alcohols [4]. Furthermore

Recent advances in the application of isoindigo derivatives in materials chemistry

• Andrei V. Bogdanov and
• Vladimir F. Mironov

Beilstein J. Org. Chem. 2021, 17, 1533–1564, doi:10.3762/bjoc.17.111

• of functional materials are analyzed and summarized. These bisheterocycles can be used in the creation of organic solar cells, sensors, lithium ion batteries as well as in OFET and OLED technologies. The potentials of the use of polymer structures based on isoindigo as photoactive component in the

Exploring the possibility of using fluorine-involved non-conjugated electron-withdrawing groups for thermally activated delayed fluorescence emitters by TD-DFT calculation

• Dongyang Chen and
• Eli Zysman-Colman

Beilstein J. Org. Chem. 2021, 17, 210–223, doi:10.3762/bjoc.17.21

• presence of these states helped to explain the short τd of 3.7 μs and the high EQEmax of 17% and good device stability with a T50 of 176 hours for the OLED [CIE coordinate (0.22, 0.40)] [23]. In an analogous manner, TD-DFT calculations predicted 5CzTRZ to possess a small ΔEST (0.02 eV) as well as a small