Facile one-pot reduction of β-nitrostyrenes to phenethylamines using sodium borohydride and copper(II) chloride

• Laura D’Andrea and
• Simon Jademyr

Beilstein J. Org. Chem. 2025, 21, 39–46, doi:10.3762/bjoc.21.4

• limited, since a NaBH4/transition metal salt system is mostly used to reduce nitroarenes [23][24][25][26]. One of the reported methods takes advantage of titanium(IV) isopropoxide as a catalyst to prepare varied β-phenethylamine analogues. Despite its simplicity, the reaction time is quite prolonged (from

gem-Difluorovinyl and trifluorovinyl Michael acceptors in the synthesis of α,β-unsaturated fluorinated and nonfluorinated amides

• Monika Bilska-Markowska,
• Marcin Kaźmierczak,
• Wojciech Jankowski and
• Marcin Hoffmann

Beilstein J. Org. Chem. 2024, 20, 2946–2953, doi:10.3762/bjoc.20.247

• . Next, TiCl4 as metal enolate mediator was applied. In the presence of both, Et3N as well as N,N,N′,N′-tetramethyl-1,3-propanediamine no reaction was observed (Table 1, entries 3–6) [40]. With titanium chloride and n-BuLi, low conversion of the starting material and obtained product Z-9a was

The charge transport properties of dicyanomethylene-functionalised violanthrone derivatives

• Sondos A. J. Almahmoud,
• Joseph Cameron,
• Dylan Wilkinson,
• Michele Cariello,
• Claire Wilson,
• Alan A. Wiles,
• Peter J. Skabara and
• Graeme Cooke

Beilstein J. Org. Chem. 2024, 20, 2921–2930, doi:10.3762/bjoc.20.244

• anhydrous chlorobenzene (6 mL). To the dark blue mixture titanium tetrachloride (100 μL, 0.840 mmol) and pyridine (130 μL, 1.68 mmol) were added and the mixture was stirred under reflux overnight. After cooling the reaction mixture to room temperature, it was poured into ice-water (50 mL) and extracted with

• in anhydrous chlorobenzene (6 mL). To the dark blue mixture, titanium tetrachloride (50.0 μL, 0.420 mmol) and pyridine (70.0 μL, 0.84 mmol) were added and the mixture was stirred under reflux overnight. After cooling the reaction mixture to room temperature, it was poured into ice-water (50 mL) and

• mL). To the dark blue mixture titanium tetrachloride (120 μL, 1.08 mmol) and pyridine (170 μL, 2.16 mmol) were added and the mixture was stirred under reflux overnight. After cooling the reaction mixture to room temperature, it was poured into ice-water (50 mL) and extracted with dichloromethane (3

Multicomponent syntheses of pyrazoles via (3 + 2)-cyclocondensation and (3 + 2)-cycloaddition key steps

• Ignaz Betcke,
• Alissa C. Götzinger,
• Maryna M. Kornet and
• Thomas J. J. Müller

Beilstein J. Org. Chem. 2024, 20, 2024–2077, doi:10.3762/bjoc.20.178

Manganese-catalyzed C–C and C–N bond formation with alcohols via borrowing hydrogen or hydrogen auto-transfer

• Mohd Farhan Ansari,
• Atul Kumar Maurya,
• Abhishek Kumar and
• Saravanakumar Elangovan

Beilstein J. Org. Chem. 2024, 20, 1111–1166, doi:10.3762/bjoc.20.98

• considerably inexpensive, eco-friendly and more abundant in the Earth’s crust. According to this viewpoint, manganese is biocompatible and less expensive than noble metals. Also, it is the third most abundant transition metal, behind titanium and iron. After the independent pioneering works of Beller [16] and

Activity assays of NnlA homologs suggest the natural product N-nitroglycine is degraded by diverse bacteria

• Kara A. Strickland,
• Brenda Martinez Rodriguez,
• Ashley A. Holland,
• Shelby Wagner,
• Michelle Luna-Alva,
• David E. Graham and
• Jonathan D. Caranto

Beilstein J. Org. Chem. 2024, 20, 830–840, doi:10.3762/bjoc.20.75

• assay as described above. Preparation of NNG and 2-NAE degradation samples Triplicate samples containing 2 mM 2-NAE or 350 µM NNG, 40 µM titanium citrate with or without 20 µM Vs NnlA in deoxygenated 23 mM tricine at pH 7.5 were incubated overnight at 21 °C. Phylogenetic tree Homologs of the Variovorax

Green and sustainable approaches for the Friedel–Crafts reaction between aldehydes and indoles

• Periklis X. Kolagkis,
• Eirini M. Galathri and
• Christoforos G. Kokotos

Beilstein J. Org. Chem. 2024, 20, 379–426, doi:10.3762/bjoc.20.36

• involves gradually adding titanium tetra-n-butoxide to a solution of deionized water in ethanol and calcinating it to form the desired nanocompounds. 10 mol % of the nano-TiO2 heated at 80 °C, provided an optimum yield of 95% for the reaction of indole with benzaldehyde, under solvent-free conditions after

Preparing a liquid crystalline dispersion of carbon nanotubes with high aspect ratio

• Keiko Kojima,
• Nodoka Kosugi,
• Hirokuni Jintoku,
• Kazufumi Kobashi and
• Toshiya Okazaki

Beilstein J. Org. Chem. 2024, 20, 52–58, doi:10.3762/bjoc.20.7

• the formation of a DWCNT wet cake. In the second step, the cake was placed in a 50 mL solution of 10 mg/mL sodium cholate (SC) (Wako) and sonicated for 50 minutes using a 500 W tip-type sonicator (Sonics, VCX500) with a titanium alloy tip (TI-6AL-4V). Centrifugation at 4,000g for 30 minutes (KOKUSAN

Tying a knot between crown ethers and porphyrins

• Maksym Matviyishyn and
• Bartosz Szyszko

Beilstein J. Org. Chem. 2023, 19, 1630–1650, doi:10.3762/bjoc.19.120

• (II) compounds 16-Pd–19-Pd exhibited conformations with the characteristic Pacman clefts, resembling their postulated solution structures and typical square-planar geometry around the palladium(II) centres. Titanium(III), vanadium(III), and chromium(III) complexes were synthesised through salt

Radical chemistry in polymer science: an overview and recent advances

• Zixiao Wang,
• Feichen Cui,
• Yang Sui and
• Jiajun Yan

Beilstein J. Org. Chem. 2023, 19, 1580–1603, doi:10.3762/bjoc.19.116

• (OMRP) is also a commonly used polymerization method, which uses transition-metal complexes such as titanium and vanadium for coordination polymerization [69]. However, due to the high cost of these complexes and their post-processing, OMRP is not widely used. The chain termination reaction of OMRP is

Clauson–Kaas pyrrole synthesis using diverse catalysts: a transition from conventional to greener approach

• Dileep Kumar Singh and
• Rajesh Kumar

Beilstein J. Org. Chem. 2023, 19, 928–955, doi:10.3762/bjoc.19.71

• adjacent strong Lewis acid sites, and the acidity of these Lewis acid sites is due to the inductive effect of sulfate on the metallic cation. Therefore, this nano-sulfated titanium dioxide acts as a new type of Lewis acid catalyst. Intermediate A was first formed by reaction of the catalyst with 2,5-DMTHF

1,4-Dithianes: attractive C2-building blocks for the synthesis of complex molecular architectures

• Bram Ryckaert,
• Ellen Demeyere,
• Frederick Degroote,
• Hilde Janssens and
• Johan M. Winne

Beilstein J. Org. Chem. 2023, 19, 115–132, doi:10.3762/bjoc.19.12

• give difficulties (Scheme 11a) [42]. The reactivity of the oxy-electrophiles can be enhanced by adding a Lewis acid catalyst such as titanium(IV) isopropoxide [59]. In this way, also epoxides can be smoothly reacted with lithiated dithiins, and both allyl and homoallyl alcohols can thus be prepared in

Menadione: a platform and a target to valuable compounds synthesis

• Acácio S. de Souza,
• Ruan Carlos B. Ribeiro,
• Dora C. S. Costa,
• Fernanda P. Pauli,
• David R. Pinho,
• Matheus G. de Moraes,
• Fernando de C. da Silva,
• Luana da S. M. Forezi and
• Vitor F. Ferreira

Beilstein J. Org. Chem. 2022, 18, 381–419, doi:10.3762/bjoc.18.43

• generation of waste or the use of environmentally friendly conditions, and they also allow recycling catalysts without losing efficiency [67][68][70]. Kholdeeva and co-workers reported the use of 30% aqueous H2O2 as oxidant and hydrothermally stable mesoporous mesophase titanium silicates (Ti-MMM-2) as

• addition, catalyst recycling experiments showed the TiSBA-15(6) had higher catalytic stability in the liquid-phase oxidation as compared to other titanium-containing mesoporous catalysts [67]. Cavani and co-workers reported a heterogenous catalyst system for the oxidation of 2-methylnaphthol (17) using 35

Synthetic strategies toward 1,3-oxathiolane nucleoside analogues

• Umesh P. Aher,
• Dhananjai Srivastava,
• Girij P. Singh and
• Jayashree B. S

Beilstein J. Org. Chem. 2021, 17, 2680–2715, doi:10.3762/bjoc.17.182

• '-thiacytidine derivatives. The tetrazole analogues of 1,3-oxathiolane nucleosides were synthesized by Faury et al. [50]. N-Glycosylation of silylated tetrazole with 1,3-oxathiolane precursor 45 in the presence of titanium tetrachloride or TMSOTf, followed by deprotection in methanolic ammonia gave the final

Strategies for the synthesis of brevipolides

• Yudhi D. Kurniawan and
• A'liyatur Rosyidah

Beilstein J. Org. Chem. 2021, 17, 2399–2416, doi:10.3762/bjoc.17.157

• . Unexpectedly, olefin isomerization occurred which led to the formation of brevipolides M (13) and N (15) after treatment with titanium tetrachloride in ≈85% yield each. Biological activities The extracts of Hyptis brevipes Poit. have been utilized by humanity across the world in tropical regions ranging from

On the application of 3d metals for C–H activation toward bioactive compounds: The key step for the synthesis of silver bullets

• Renato L. Carvalho,
• Amanda S. de Miranda,
• Mateus P. Nunes,
• Roberto S. Gomes,
• Guilherme A. M. Jardim and
• Eufrânio N. da Silva Júnior

Beilstein J. Org. Chem. 2021, 17, 1849–1938, doi:10.3762/bjoc.17.126

• catalysts can still offer. Titanium-catalyzed C–H activation Titanium is another well-known and considerably cheap 3d metal which is underexplored in the C–H activation field [60], especially with regard to the synthesis of biologically active compounds. Therefore, further studies on the applicability of

• this specific metal are highly desirable. Titanium is well known to be used as titanium dioxide, a powerful photocatalyst present in inks [61][62] and sunscreens [63][64]. As a catalyst, it can be used, for example, in polymerization methods to synthesize polypropylene [65]. With regard to C–H

• activation reactions, Doye’s group has dedicated its research to the development of significant titanium-catalyzed amine-directed C–H activation [66][67]. Recently, a good example was reported, in which C(sp3)–H hydroaminoalkylation of N-alkylaniline derivatives was achieved [68]. For this process, the

Design, synthesis and photophysical properties of novel star-shaped truxene-based heterocycles utilizing ring-closing metathesis, Clauson–Kaas, Van Leusen and Ullmann-type reactions as key tools

• Shakeel Alvi and
• Rashid Ali

Beilstein J. Org. Chem. 2021, 17, 1374–1384, doi:10.3762/bjoc.17.96

• bisoxazole truxene derivative 21 by virtue of Van Leusen reaction as a key step (Scheme 6). To this context, we first treated the hexabutylated derivative 2 with 1,1-dichlorodimethyl ether acting as a formyl source in the presence of Lewis acid such as titanium tetrachloride (TiCl4) in Rieche manner to yield

Antiviral therapy in shrimp through plant virus VLP containing VP28 dsRNA against WSSV

• Santiago Ramos-Carreño,
• Ivone Giffard-Mena,
• Jose N. Zamudio-Ocadiz,
• Alfredo Nuñez-Rivera,
• Ricardo Valencia-Yañez,
• Jaime Ruiz-Garcia,
• Maria Teresa Viana and
• Ruben D. Cadena-Nava

Beilstein J. Org. Chem. 2021, 17, 1360–1373, doi:10.3762/bjoc.17.95

• before use. Forty percent of water was replaced every three days to collect food waste and feces. Once the PL reached a juvenile stage, they were transferred into 12 L aquariums. Each aquarium was equipped with a filter and a heating system (Titanium Heater HMO-200, JSK). The shrimp were immersed in a

A comprehensive review of flow chemistry techniques tailored to the flavours and fragrances industries

• Guido Gambacorta,
• James S. Sharley and
• Ian R. Baxendale

Beilstein J. Org. Chem. 2021, 17, 1181–1312, doi:10.3762/bjoc.17.90

N-tert-Butanesulfinyl imines in the asymmetric synthesis of nitrogen-containing heterocycles

• Joseane A. Mendes,
• Paulo R. R. Costa,
• Miguel Yus,
• Francisco Foubelo and
• Camilla D. Buarque

Beilstein J. Org. Chem. 2021, 17, 1096–1140, doi:10.3762/bjoc.17.86

Prins cyclization-mediated stereoselective synthesis of tetrahydropyrans and dihydropyrans: an inspection of twenty years

• Asha Budakoti,
• Pradip Kumar Mondal,
• Prachi Verma and
• Jagadish Khamrai

Beilstein J. Org. Chem. 2021, 17, 932–963, doi:10.3762/bjoc.17.77

• spongistatin [82]. 2,6-Disubstituted 4-methylenetetrahydropyran was also synthesized from silylstannane and two units of aldehyde in a two-step protocol. The first step involves the addition between silylstannane 185 and an aldehyde in the presence of titanium BINOLate as a catalyst, which afforded

Valorisation of plastic waste via metal-catalysed depolymerisation

• Francesca Liguori,
• Carmen Moreno-Marrodán and
• Pierluigi Barbaro

Beilstein J. Org. Chem. 2021, 17, 589–621, doi:10.3762/bjoc.17.53

• graphical format in Figure 2 for the glycolysis reaction of PET, using titanium(IV) n-butoxide as the catalyst. Compared to the uncatalysed process, benefits include milder reaction conditions, higher selectivity and productivity and reduced generation of waste; in short, improved sustainability [84][85

Selective synthesis of α-organylthio esters and α-organylthio ketones from β-keto esters and sodium S-organyl sulfurothioates under basic conditions

• Jean C. Kazmierczak,
• Roberta Cargnelutti,
• Thiago Barcellos,
• Claudio C. Silveira and
• Ricardo F. Schumacher

Beilstein J. Org. Chem. 2021, 17, 234–244, doi:10.3762/bjoc.17.24

• , and related compounds. Some of them are catalyzed by expensive transition metals, such as gold, iridium, palladium, and titanium. More recently, the selective formation of C–S bonds using 1,3-dicarbonyl compounds, followed by a C–C bond cleavage has emerged as a versatile and less expensive protocol

Insight into functionalized-macrocycles-guided supramolecular photocatalysis

• Minzan Zuo,
• Krishnasamy Velmurugan,
• Kaiya Wang,
• Xueqi Tian and
• Xiao-Yu Hu

Beilstein J. Org. Chem. 2021, 17, 139–155, doi:10.3762/bjoc.17.15

• reported two types of thiacalix[4]arene-protected titanium–oxo clusters [37]. In that work, p-tert-butylthiacalix[4]arene (H4TC4A) was introduced to tetranuclear and hexanuclear clusters Ti4 and Ti6, respectively (Figure 12). The formed hybrid materials had band gaps of 2.19 eV (Ti4) and 2.24 eV (Ti6). The

• titanium–thiacalix[4]arene-based clusters for H2 evolution, and it also provides a useful method for tuning the band gaps of the catalysts. Apart from reducing the distance between the electron donor and acceptor, calixarenes can also promote the charge separation to enhance the electron transfer [38

All-carbon [3 + 2] cycloaddition in natural product synthesis

• Zhuo Wang and
• Junyang Liu

Beilstein J. Org. Chem. 2020, 16, 3015–3031, doi:10.3762/bjoc.16.251

• -unsaturated enone to afford conidiogenone B (171) in 32% yield upon treatment with RhCl3 in microwave. The reaction mechanism of Danheiser’s [3 + 2] annulation is shown according to the Danheiser’s proposal [74] (Scheme 13C, inset). Initial complexation of the α,β-unsaturated ketone 167 and titanium

• cation, which is intercepted by the titanium enolate and results in the new C–C bond formation to give the five-membered carbocycle 169. Conclusion The all-carbon [3 + 2] cycloaddition, together with the [3 + 2] annulation, continue to be an attractive class of reactions for the synthesis of highly