Synthesis, structure, and properties of switchable cross-conjugated 1,4-diaryl-1,3-butadiynes based on 1,8-bis(dimethylamino)naphthalene

• Semyon V. Tsybulin,
• Ekaterina A. Filatova,
• Alexander F. Pozharskii,
• Valery A. Ozeryanskii and
• Anna V. Gulevskaya

Beilstein J. Org. Chem. 2023, 19, 674–686, doi:10.3762/bjoc.19.49

• to its analogs with electron-withdrawing substituents. The redox properties of oligomers 5 were evaluated by cyclic voltammetry (CV) in dichloromethane solution containing 0.1 M n-Bu4NPF6 in the standard three-electrode electrochemical cell: glassy carbon working electrode, platinum auxiliary

A new oxidatively stable ligand for the chiral functionalization of amino acids in Ni(II)–Schiff base complexes

• Alena V. Dmitrieva,
• Oleg A. Levitskiy,
• Yuri K. Grishin and
• Tatiana V. Magdesieva

Beilstein J. Org. Chem. 2023, 19, 566–574, doi:10.3762/bjoc.19.41

• voltammetry (CV) in acetonitrile with 0.1 M Bu4NBF4 as a supporting electrolyte. A platinum disk was used as a working electrode. Formal potential values are given in Table 4. As could be expected, the potential values are rather close to that for the corresponding derivatives of the original ligand L1 [37

Discrimination of β-cyclodextrin/hazelnut (Corylus avellana L.) oil/flavonoid glycoside and flavonolignan ternary complexes by Fourier-transform infrared spectroscopy coupled with principal component analysis

• Nicoleta G. Hădărugă,
• Gabriela Popescu,
• Dina Gligor (Pane),
• Cristina L. Mitroi,
• Sorin M. Stanciu and
• Daniel Ioan Hădărugă

Beilstein J. Org. Chem. 2023, 19, 380–398, doi:10.3762/bjoc.19.30

• (Bruker Optik GmbH, Ettlingen, Germany), equipped with an ATR (single-reflection Platinum diamond attenuated total reflectance) system. The following FTIR conditions were set up: acquisition range 4000–400 cm−1, resolution 4 cm−1, number of scans 128, sample mass 10–20 mg, spectrum range for the DLaTGS

Two-step continuous-flow synthesis of 6-membered cyclic iodonium salts via anodic oxidation

• Julian Spils,
• Thomas Wirth and
• Boris J. Nachtsheim

Beilstein J. Org. Chem. 2023, 19, 27–32, doi:10.3762/bjoc.19.2

• oxidation of iodoarenes to form DIS by Wirth et al. (Scheme 1B) [39]. Herein, established conditions for synthesizing DIS were transferred into flow chemistry utilizing a model flow reactor with two platinum electrodes. Other recent examples include the generation of five-membered CDIS utilizing fluorinated

Naphthalimide-phenothiazine dyads: effect of conformational flexibility and matching of the energy of the charge-transfer state and the localized triplet excited state on the thermally activated delayed fluorescence

• Kaiyue Ye,
• Liyuan Cao,
• Davita M. E. van Raamsdonk,
• Zhijia Wang,
• Jianzhang Zhao,
• Daniel Escudero and
• Denis Jacquemin

Beilstein J. Org. Chem. 2022, 18, 1435–1453, doi:10.3762/bjoc.18.149

• electrochemical workstation (CHI instruments, Inc., Shanghai, China) using N2-purged saturated solutions (NI-PTZ, NI-PTZ2, NI-Ph-PTZ, and NI-PhMe2-PTZ in deaerated dichloromethane, NI-PTZ-O in deaerated acetonitrile) containing 0.10 M Bu4NPF6 as a supporting electrolyte, a platinum electrode as counter electrode

• with gauze platinum as working electrode, a platinum wire as counter electrode, and Ag/AgNO3 as reference electrode. Bu4N[PF6] was used as the supporting electrolyte. The potential was regulated with a CHI610D electrochemical workstation (CHI instruments, Inc., Shanghai, China), and the spectra were

Electrochemical formal homocoupling of sec-alcohols

• Kosuke Yamamoto,
• Kazuhisa Arita,
• Masashi Shiota,
• Masami Kuriyama and
• Osamu Onomura

Beilstein J. Org. Chem. 2022, 18, 1062–1069, doi:10.3762/bjoc.18.108

• -1,2-diols through the formal homocoupling of sec-alcohols using platinum electrodes in an undivided cell (Scheme 1c). Results and Discussion We commenced the optimization study for the electrochemical formal homocoupling of sec-alcohols by using 1-phenylethanol (1a) as a model substrate. The results

• are summarized in Table 1. The electrolysis was carried out using an undivided cell in the presence of Et4NBr as an electrolyte with a mixed solvent of MeCN and H2O under air atmosphere. When 4 F/mol of electricity was passed through the reaction mixture using two platinum electrodes at 0 ºC, the

• . The present reaction smoothly proceeded in a simple undivided cell with platinum electrodes under constant current conditions, affording pinacol-type products in moderate to good yields with good to high diastereoselectivities. The successful large-scale experiment showed the potential synthetic

Electrochemical vicinal oxyazidation of α-arylvinyl acetates

• Yi-Lun Li,
• Zhaojiang Shi,
• Tao Shen and
• Ke-Yin Ye

Beilstein J. Org. Chem. 2022, 18, 1026–1031, doi:10.3762/bjoc.18.103

• relevant heterocycles. From vinyl acetates to α-azidoketones. Substrate scope. Reaction conditions: α-arylvinyl acetate (0.5 mmol), TMSN3 (1.0 mmol), n-Bu4NPF6 (0.5 mmol), H2O (2.5 mmol), MeCN (5 mL), carbon cloth anode, platinum cathode, undivided cell, Ecell = 2.3 V, room temperature, 6 h. a2 h

Electroreductive coupling of 2-acylbenzoates with α,β-unsaturated carbonyl compounds: density functional theory study on product selectivity

• Naoki Kise and
• Toshihiko Sakurai

Beilstein J. Org. Chem. 2022, 18, 956–962, doi:10.3762/bjoc.18.95

• ) was placed in the cathodic chamber of a divided cell (40 mL beaker, 3 cm diameter, 6 cm height) equipped with a platinum cathode (5 × 5 cm2), a platinum anode (2 × 1 cm2), and a ceramic cylindrical diaphragm (1.5 cm diameter). A 0.3 M solution of Bu4NClO4 in DMF (4 mL) was placed in the anodic chamber

Introducing a new 7-ring fused diindenone-dithieno[3,2-b:2',3'-d]thiophene unit as a promising component for organic semiconductor materials

• Valentin H. K. Fell,
• Joseph Cameron,
• Alexander L. Kanibolotsky,
• Eman J. Hussien and
• Peter J. Skabara

Beilstein J. Org. Chem. 2022, 18, 944–955, doi:10.3762/bjoc.18.94

• Cyclic voltammetry (CV) was used to estimate the ionisation energy (IE) and the electron affinity (EA) of the title compound (Figure 9) [63]. CV was measured in a 10−4 M CH2Cl2 solution with 0.1 M tetra-n-butylammonium hexafluorophosphate (TBAPF6) added as electrolyte. A platinum disk electrode, a Pt

Cathodic generation of reactive (phenylthio)difluoromethyl species and its reactions: mechanistic aspects and synthetic applications

• Sadanobu Iwase,
• Shinsuke Inagi and
• Toshio Fuchigami

Beilstein J. Org. Chem. 2022, 18, 872–880, doi:10.3762/bjoc.18.88

• bromodifluoromethyl phenyl sulfide (1) was measured by cyclic voltammetry in an anhydrous acetonitrile (MeCN) solution containing Bu4NClO4 (0.1 M) using a platinum electrode. One irreversible reduction peak was observed at −2.4 V vs SSCE at a scan rate of 100 mV/s. Even at a much higher scan rate of 500 mV/s, the

• cathodic reduction of 1 at a platinum cathode in Bu4NClO4/MeCN. Notably, when 1.3 F/mol were passed, starting compound 1 was consumed completely. As shown in Scheme 4, difluoromethyl phenyl sulfide (2) was mainly formed as well as bis(phenylthio)difluoromethane (3) as a minor product. From these results

• the radical trapping reagent, the expected radical adduct 4 was formed in reasonable yield of ca. 30% (Table 1, run 1). A platinum cathode is more suitable for the formation of adduct 4 compared to a glassy carbon cathode (Table 1, run 2). Dolbier et al. reported that electron-poor perfluoroalkyl

Synthesis of odorants in flow and their applications in perfumery

• Merlin Kleoff,
• Paul Kiler and
• Philipp Heretsch

Beilstein J. Org. Chem. 2022, 18, 754–768, doi:10.3762/bjoc.18.76

• solution of (R)-carvone (25) in toluene is merged with a stream of hydrogen and the resulting segmented flow is passed through a column reactor containing a dimethylpolysilane-modified platinum catalyst (DMPS-Pt, 26), immobilized on carbon/calcium phosphate. At a temperature of 25 °C using 1.4 equivalents

• ) via selective hydrogenation to enone 27, condensation to hydrazone 28 and subsequent Shapiro reaction. DMPS = dimethylpolysilane-modified platinum catalyst; Ts = tosyl. Selective hydrogenation of alkyne 31 to “leaf alcohol” 32 employing a solid-supported palladium catalyst. A) Synthesis of jasmonal

Heteroleptic metallosupramolecular aggregates/complexation for supramolecular catalysis

• Prodip Howlader and
• Michael Schmittel

Beilstein J. Org. Chem. 2022, 18, 597–630, doi:10.3762/bjoc.18.62

• ]. Using addition and removal of chloride, the Mirkin group reversibly and quantitatively toggled the platinum(II)-based switch 1262+ between a homo- and heteroligated form (Figure 29) [132]. In the closed platinum(II) complex 1262+, the urea units were available for activation of butenone (127) by

Menadione: a platform and a target to valuable compounds synthesis

• Acácio S. de Souza,
• Ruan Carlos B. Ribeiro,
• Dora C. S. Costa,
• Fernanda P. Pauli,
• David R. Pinho,
• Matheus G. de Moraes,
• Fernando de C. da Silva,
• Luana da S. M. Forezi and
• Vitor F. Ferreira

Beilstein J. Org. Chem. 2022, 18, 381–419, doi:10.3762/bjoc.18.43

• electrolysis (Scheme 10). For this approach, two smooth platinum foil electrodes placed 1 cm apart in the upper aqueous phase were electrolyzed galvanostatically (30 mA/cm2). Additionally, a NaBr solution acidified with H2SO4 was used as electrolyte. The voltage during electrolysis was 2.1 V and when the

Synthesis of piperidine and pyrrolidine derivatives by electroreductive cyclization of imine with terminal dihaloalkanes in a flow microreactor

• Yuki Naito,
• Naoki Shida and
• Mahito Atobe

Beilstein J. Org. Chem. 2022, 18, 350–359, doi:10.3762/bjoc.18.39

• of the cathode material on the yield of 3a using three different cathode materials: platinum (Pt), glassy carbon (GC), and silver (Ag). As shown in Table 1, the yield of 3a was higher using GC than that of the other cathode materials. The yield of the hydromonomeric product 4 was also highest when GC

• microreactor was constructed with a platinum plate (3 × 3 cm) and cathode plate (3 × 3 cm) (Supporting Information File 1, Figure S1). A spacer (double faced adhesive type with thicknesses of 20, 40, or 80 μm) was used to leave a rectangular channel exposed (1 × 3 cm), and the two electrodes were simply

Photophysical, photostability, and ROS generation properties of new trifluoromethylated quinoline-phenol Schiff bases

• Inaiá O. Rocha,
• Yuri G. Kappenberg,
• Wilian C. Rosa,
• Clarissa P. Frizzo,
• Nilo Zanatta,
• Marcos A. P. Martins,
• Isadora Tisoco,
• Bernardo A. Iglesias and
• Helio G. Bonacorso

Beilstein J. Org. Chem. 2021, 17, 2799–2811, doi:10.3762/bjoc.17.191

• VERTEX 70 spectrophotometer with Platinum ATR accessory (diamond crystal) in the 4000–400 cm−1 region. High-resolution mass spectra (HRMS) were obtained for all compounds on a hybrid high-resolution and high-accuracy (5 μL/L) micro Q-TOF mass spectrometer (Bruker Scientific®, Billerica, MA, USA) at the

Synthesis and investigation on optical and electrochemical properties of 2,4-diaryl-9-chloro-5,6,7,8-tetrahydroacridines

• Najeh Tka,
• Mohamed Adnene Hadj Ayed,
• Mourad Ben Braiek,
• Mahjoub Jabli and
• Peter Langer

Beilstein J. Org. Chem. 2021, 17, 2450–2461, doi:10.3762/bjoc.17.162

• electrolyte by using a three-electrode cell with a glassy carbon electrode as the working electrode, a platinum wire as the counter electrode, and an Ag/AgCl electrode as the reference electrode. All the measurements were scanned in negative and positive directions at a scan rate of 50 mV/s, as controlled by

Recent advances in the syntheses of anthracene derivatives

• Giovanni S. Baviera and
• Paulo M. Donate

Beilstein J. Org. Chem. 2021, 17, 2028–2050, doi:10.3762/bjoc.17.131

• step, a platinum-catalyzed intramolecular cycloaromatization of 119 provided dibenzo[a,h]anthracenes 120 bearing methyl and alkoxy groups in low to moderate yields (26–51%) [61]. Metal-catalyzed intramolecular double-cyclization In 2012, Nishiyama’s research group synthesized dibenzo[a,h]anthracenes by

Recent advances in the application of isoindigo derivatives in materials chemistry

• Andrei V. Bogdanov and
• Vladimir F. Mironov

Beilstein J. Org. Chem. 2021, 17, 1533–1564, doi:10.3762/bjoc.17.111

• composite with platinum nanoparticles stabilized with poly(acrylic acid) [113]. Such a catalytic system, obtained by layer-by-layer self-assembly with the addition of poly(diallyldimethylammonium chloride) on the indium tin oxide surface, provided hydrogen formation in photoelectrolytic cycles with a

A comprehensive review of flow chemistry techniques tailored to the flavours and fragrances industries

• Guido Gambacorta,
• James S. Sharley and
• Ian R. Baxendale

Beilstein J. Org. Chem. 2021, 17, 1181–1312, doi:10.3762/bjoc.17.90

Amino- and polyaminophthalazin-1(2H)-ones: synthesis, coordination properties, and biological activity

• Zbigniew Malinowski,
• Emilia Fornal,
• Agata Sumara,
• Renata Kontek,
• Karol Bukowski,
• Beata Pasternak,
• Dariusz Sroczyński,
• Joachim Kusz,
• Magdalena Małecka and
• Monika Nowak

Beilstein J. Org. Chem. 2021, 17, 558–568, doi:10.3762/bjoc.17.50

• platinum disc electrode suggested that the [(L3)Cu(II)Cl2]/[(L3)Cu(I)Cl2] redox couple was formed. For more details, see Supporting Information File 2. Bioactivity Cytotoxicity analysis – MTT assay We used the MTT assay to evaluate compounds 5c, 5d, 5f, 5g, 6b, and 6d for their potential activity on

Annulation of a 1,3-dithiole ring to a sterically hindered o-quinone core. Novel ditopic redox-active ligands

• Sergey V. Norkov,
• Anton V. Cherkasov,
• Andrey S. Shavyrin,
• Maxim V. Arsenyev,
• Viacheslav A. Kuropatov and
• Vladimir K. Cherkasov

Beilstein J. Org. Chem. 2021, 17, 273–282, doi:10.3762/bjoc.17.26

• electrode (2 mm diameter), platinum wire counter electrode and Ag/AgCl/KCl reference electrode. X-ray crystallography The X-ray data for 6a–d and 7–9 were collected on Rigaku OD Xcalibur (6b–d, 7, 9) and Bruker D8 Quest (6a, 8) diffractometers (Mo Kα radiation, ω-scans technique, λ = 0.71073 Å) using APEX3

Recent progress in the synthesis of homotropane alkaloids adaline, euphococcinine and N-methyleuphococcinine

• Dimas J. P. Lima,
• Antonio E. G. Santana,
• Michael A. Birkett and
• Ricardo S. Porto

Beilstein J. Org. Chem. 2021, 17, 28–41, doi:10.3762/bjoc.17.4

• intermediate thioiminium salt, which was heated under the reflux of triethylamine and trimethyl phosphite, providing compound 28 in 69% yield. The catalytic hydrogenation of 28 occurred in platinum (H2, Pt/C) under a pressure of 60 psi of hydrogen (about 4 atm), resulting in amide 29 in 96% yield. This

All-carbon [3 + 2] cycloaddition in natural product synthesis

• Zhuo Wang and
• Junyang Liu

Beilstein J. Org. Chem. 2020, 16, 3015–3031, doi:10.3762/bjoc.16.251

• as the phosphine-catalyzed [3 + 2] cycloaddition [17], platinum-catalyzed [3 + 2] cycloaddition [18], and Rhodium-catalyzed [3 + 2] cycloaddition [12], were invented and have been extensively used in natural product synthesis in the last decade. Many reviews focusing the method development of the all

• 64% yield over three steps. The conversion of 138 to sinensilactam A (20) was achieved in two steps. Platinum-catalyzed [3 + 2] cycloaddition The platinum-catalyzed intermolecular [3 + 2] cycloaddition of propargyl ether derivatives and vinyl ether producing polycyclic indoles was disclosed by

• Iwasawa and co-workers in 2011 [18][66] (Scheme 10A). Treatment of Boc-protected aniline 139 and n-butyl vinyl ether (140) with a platinum(II) catalyst afforded tricyclic indole 141 in 83% yield. The authors suggested that this catalytic [3 + 2] cycloaddition reaction may involve an α,β-unsaturated

Controlled decomposition of SF₆ by electrochemical reduction

• Sébastien Bouvet,
• Bruce Pégot,
• Stéphane Sengmany,
• Erwan Le Gall,
• Eric Léonel,
• Anne-Marie Goncalves and
• Emmanuel Magnier

Beilstein J. Org. Chem. 2020, 16, 2948–2953, doi:10.3762/bjoc.16.244

• , CNRS, ICMPE, UMR 7182, 2 rue Henri Dunant, 94320 Thiais, France 10.3762/bjoc.16.244 Abstract The electroreduction of SF6 is shown at ambient temperature in acetonitrile using an array of platinum microelectrodes to improve the electrical detection. Its half reduction potential occurs at −2.17 V vs Fc

• reduction potential of SF6. To allow its electroreduction feasibility in acetonitrile, an electrochemical analytical approach was required [24]. This crucial step was supported by sensors which are based on a micro-disc-array of platinum ultramicroelectrodes (20 µm diameter) acting as multi-probe channels

• reactions were carried out in a single compartment with a conventional three-electrode arrangement: two platinum electrodes and one silver reference electrode, SRE (Figure 3). The electrolysis is performed at constant potential (−2.3 V vs Fc+/Fc) with a continuous supply of SF6 placed in a rubber balloon

A heterobimetallic tetrahedron from a linear platinum(II)-bis(acetylide) metalloligand

• Matthias Hardy,
• Marianne Engeser and
• Arne Lützen

Beilstein J. Org. Chem. 2020, 16, 2701–2708, doi:10.3762/bjoc.16.220

• (acetylide)platinum(II) complex [Pt(L1)2(PBu3)2] as a linear metalloligand. The reaction of this metalloligand with iron(II) cations and pyridine-2-carbaldehyde according to the subcomponent self-assembly approach yielded decanuclear heterobimetallic tetrahedron [Fe4Pt6(L2)12](OTf)8. Thus, combination of

• platinum(II) ions to be especially suitable to prepare a linear metalloligand due to their highly predictable square-planar coordination environment that can easily be employed to access tetravalent planar or divalent V-shaped cis- or linear trans-configurated complexes [43][44][45]. In this context

• platinum(II)-bis(acetylide) complexes [46][47] proved useful as building blocks for the construction of polymers [48], rings [49][50] and cages [36][42][51]. These neutral compounds are usually easy-to-access, rather stable and the cis- and trans-isomers can be separated efficiently. In this work we