Cationic cobalt-catalyzed [1,3]-rearrangement of N-alkoxycarbonyloxyanilines

• Itaru Nakamura,
• Mao Owada,
• Takeru Jo and
• Masahiro Terada

Beilstein J. Org. Chem. 2018, 14, 1972–1979, doi:10.3762/bjoc.14.172

• solvents, such as CHCl3, CH2Cl2, and PhCl, ethereal solvent, such as Et2O and tert-butyl methyl ether (MTBE), and toluene were less efficient (Table 2, entries 2–7), while the use of polar solvents, such as tetrahydrofuran (THF), acetonitrile, and N,N-dimethylformamide (DMF), resulted in quantitative

Defining the hydrophobic interactions that drive competence stimulating peptide (CSP)-ComD binding in Streptococcus pneumoniae

• Bimal Koirala,
• Robert A. Hillman,
• Erin K. Tiwold,
• Michael A. Bertucci and
• Yftah Tal-Gan

Beilstein J. Org. Chem. 2018, 14, 1769–1777, doi:10.3762/bjoc.14.151

• ) procedures [34]. Phenylglycine and norvaline derivatives were prepared on a CEM Discover microwave synthesizer, with diisopropyl carbodiimide (DIC) as the coupling reagent along with Oxyma Pure. The ratio of DIC:Oxyma Pure:AA was 3.6:3:3 dissolved in N,N-dimethylformamide (DMF) for a final DIC concentration

Synthesis of trifluoromethylated 2H-azirines through Togni reagent-mediated trifluoromethylation followed by PhIO-mediated azirination

• Jiyun Sun,
• Xiaohua Zhen,
• Huaibin Ge,
• Guangtao Zhang,
• Xuechan An and
• Yunfei Du

Beilstein J. Org. Chem. 2018, 14, 1452–1458, doi:10.3762/bjoc.14.123

• in the presence of CuI in N,N-dimethylformamide (DMF) [62] at room temperature for two hours afforded the β-trifluoromethylated enamine 6a in a 23% yield. Subjecting enamine 6a to PhIO in 1,2-dichloroethane (DCE) for 12 hours at room temperature led to the formation of the desired β

Three-component coupling of aryl iodides, allenes, and aldehydes catalyzed by a Co/Cr-hybrid catalyst

• Kimihiro Komeyama,
• Shunsuke Sakiyama,
• Kento Iwashita,
• Itaru Osaka and
• Ken Takaki

Beilstein J. Org. Chem. 2018, 14, 1413–1420, doi:10.3762/bjoc.14.118

• solvent used; for example, dimethylformamide (DMF), tetrahydrofuran (THF), 1,4-dioxane, and toluene did not result in any formation of 4a. With the optimized conditions in hand, the use of aldehydes in the Co/Cr-catalyzed three-component coupling reaction was explored, as shown in Scheme 6. Electron-rich

Design and biological characterization of novel cell-penetrating peptides preferentially targeting cell nuclei and subnuclear regions

• Anja Gronewold,
• Mareike Horn and
• Ines Neundorf

Beilstein J. Org. Chem. 2018, 14, 1378–1388, doi:10.3762/bjoc.14.116

• (Marktredwitz, Germany). Other chemicals and consumables including 1-[bis(dimethylamino)methylene]-1H-1,2,3-triazolo[4,5-b]pyridinium 3-oxide hexafluorophosphate (HATU), N,N-diisopropylethylamine (DIPEA), acetonitrile (ACN), and trifluoroacetic acid (TFA), dimethylformamide (DMF), N-methylpyrrolidine (NMP

One hundred years of benzotropone chemistry

• Arif Dastan,
• Haydar Kilic and
• Nurullah Saracoglu

Beilstein J. Org. Chem. 2018, 14, 1120–1180, doi:10.3762/bjoc.14.98

Synthesis and in vitro biochemical evaluation of oxime bond-linked daunorubicin–GnRH-III conjugates developed for targeted drug delivery

• Sabine Schuster,
• Beáta Biri-Kovács,
• Bálint Szeder,
• Viktor Farkas,
• László Buday,
• Zsuzsanna Szabó,
• Gábor Halmos and
• Gábor Mező

Beilstein J. Org. Chem. 2018, 14, 756–771, doi:10.3762/bjoc.14.64

• )) were obtained from Sigma-Aldrich Kft (Budapest, Hungary). Daunorubicin hydrochloride was a gift from IVAX (Budapest, Hungary). N,N-Dimethylformamide (DMF), dichloromethane (DCM) and diethyl ether (Et2O) were purchased from Molar Chemicals Kft (Budapest, Hungary). All reagents and solvents were of

Position-dependent impact of hexafluoroleucine and trifluoroisoleucine on protease digestion

• Susanne Huhmann,
• Anne-Katrin Stegemann,
• Kristin Folmert,
• Damian Klemczak,
• Johann Moschner,
• Michelle Kube and
• Beate Koksch

Beilstein J. Org. Chem. 2017, 13, 2869–2882, doi:10.3762/bjoc.13.279

• non-fluorinated amino acids were performed in dimethylformamide (DMF) with the Fmoc-L-amino acid, 1-hydroxybenzotriazole (HOBt) and N,N’-diisocarbodiimide (DIC) in an eight-fold excess with respect to the resin amount. In order to ensure completion of the reaction the couplings were performed twice

Development of a fluorogenic small substrate for dipeptidyl peptidase-4

• Futa Ogawa,
• Masanori Takeda,
• Kanae Miyanaga,
• Keita Tani,
• Ryuji Yamazawa,
• Kiyoshi Ito,
• Atsushi Tarui,
• Kazuyuki Sato and
• Masaaki Omote

Beilstein J. Org. Chem. 2017, 13, 2690–2697, doi:10.3762/bjoc.13.267

• information All experiments were carried out under an argon atmosphere in flame-dried glassware using standard inert techniques for introducing reagents and solvents, unless otherwise noted. N,N-Dimethylformamide (DMF) was distilled over calcium hydride and stored in a bottle with activated molecular sieves

Ring-size-selective construction of fluorine-containing carbocycles via intramolecular iodoarylation of 1,1-difluoro-1-alkenes

• Takeshi Fujita,
• Ryo Kinoshita,
• Tsuyoshi Takanohashi,
• Naoto Suzuki and
• Junji Ichikawa

Beilstein J. Org. Chem. 2017, 13, 2682–2689, doi:10.3762/bjoc.13.266

• chromatography (PTLC) were conducted on silica gel (Silica Gel 60 N, Kanto Chemical Co., Inc. for column chromatography and Wakogel B-5F, Wako Pure Chemical Industries, Ltd. for PTLC). Tetrahydrofuran (THF), dichloromethane, and N,N-dimethylformamide (DMF) were purified by a solvent-purification system

Synthesis of naturally-derived macromolecules through simplified electrochemically mediated ATRP

• Paweł Chmielarz,
• Tomasz Pacześniak,
• Katarzyna Rydel-Ciszek,
• Izabela Zaborniak,
• Paulina Biedka and
• Andrzej Sobkowiak

Beilstein J. Org. Chem. 2017, 13, 2466–2472, doi:10.3762/bjoc.13.243

• solutions contained N,N-dimethylformamide (DMF) and tert-butyl acrylate (tBA). One can observe, that quercetin is not reduced in the applied potential window (Figure S2, Supporting Information File 1), meanwhile it shows two small anodic peaks at 0.2 V and 0.5 V. According to the commonly accepted mechanism

Exploring mechanochemistry to turn organic bio-relevant molecules into metal-organic frameworks: a short review

• Vânia André,
• Sílvia Quaresma,
• João Luís Ferreira da Silva and
• M. Teresa Duarte

Beilstein J. Org. Chem. 2017, 13, 2416–2427, doi:10.3762/bjoc.13.239

• to incorporate APIs as a guest. Indeed, they synthesized two BioMOFs by grinding together zinc, fumaric acid and 4,4’-bipyridyl (bipy) or trans-1,2-di(4-pyridyl)ethylene (bpe) as ligands in the presence of a space-filling liquid agent (N,N-dimethylformamide, DMF). This synthesis also proceeded when

• Bi38 cluster with coordinated N,N-dimethylformamide (DMF) molecules instead of acetone, showing the structural robustness of this core in solution. The crystal structure solution from powder X-ray diffraction data of the disalicylate revealed the first crystal structure of a bismuth salicylate without

New electroactive asymmetrical chalcones and therefrom derived 2-amino- / 2-(1H-pyrrol-1-yl)pyrimidines, containing an N-[ω-(4-methoxyphenoxy)alkyl]carbazole fragment: synthesis, optical and electrochemical properties

• Daria G. Selivanova,
• Alexei A. Gorbunov,
• Olga A. Mayorova,
• Alexander N. Vasyanin,
• Igor V. Lunegov,
• Elena V. Shklyaeva and
• Georgii G. Abashev

Beilstein J. Org. Chem. 2017, 13, 1583–1595, doi:10.3762/bjoc.13.158

• dichloromethane (DCM), acetone (DMK), benzene, tetrahydrofuran (THF), dimethylformamide (DMF), dimethyl sulfoxide (DMSO), but are poorly soluble in hot ethanol and not soluble in hexane. On the enlargement of the conjugated system the colour of the compounds solutions in the sunlight expectedly changes from

Synthesis of novel 13α-estrone derivatives by Sonogashira coupling as potential 17β-HSD1 inhibitors

• Ildikó Bacsa,
• Rebeka Jójárt,
• János Wölfling,
• Gyula Schneider,
• Bianka Edina Herman,
• Mihály Szécsi and
• Erzsébet Mernyák

Beilstein J. Org. Chem. 2017, 13, 1303–1309, doi:10.3762/bjoc.13.126

• to differ depending on the position of the iodo substituent on the sterane skeleton (Scheme 1). Couplings at C-2 could efficiently be achieved using 0.1 equiv of Pd(PPh3)4 and CuI in tetrahydrofuran (THF) or dimethylformamide (DMF) as solvent in the presence of Et3N as a base at 50 °C for 20 min in a

Cyclodextrins tethered with oligolactides – green synthesis and structural assessment

• Cristian Peptu,
• Mihaela Balan-Porcarasu,
• Alena Šišková,
• Ľudovít Škultéty and
• Jaroslav Mosnáček

Beilstein J. Org. Chem. 2017, 13, 779–792, doi:10.3762/bjoc.13.77

• ) spectroscopy, however, in case of CD-oligolactides no such structural proofs were presented. Later, the LA was polymerized in dimethylformamide (DMF) solution to result in well-defined and homogenous β-CD functionalized with oligolactides as demonstrated by electrospray mass spectrometry (ESI–MS) and NMR

Continuous-flow synthesis of highly functionalized imidazo-oxadiazoles facilitated by microfluidic extraction

• Ananda Herath and
• Nicholas D. P. Cosford

Beilstein J. Org. Chem. 2017, 13, 239–246, doi:10.3762/bjoc.13.26

• using polar organic solvents such as dimethylformamide (DMF) [7][8][9][15]. However, the challenges of removing large amounts of high boiling solvents during the purification and isolation process can limit scalability and efficiency. Furthermore, many useful synthetic reactions are incompatible with

• reaction conditions using a single microreactor we found that the combination of EDC/HOBt/DIPEA (1:1:1) for 10 min at 150 °C provided the best conditions for complete conversion of 3-bromobenzoic acid to the corresponding 1,2,4-oxadiazole derivative (Table 1, entry 5). The use of N,N-dimethylformamide (DMF

Electron-transfer-initiated benzoin- and Stetter-like reactions in packed-bed reactors for process intensification

• Anna Zaghi,
• Daniele Ragno,
• Graziano Di Carmine,
• Carmela De Risi,
• Olga Bortolini,
• Pier Paolo Giovannini,
• Giancarlo Fantin and
• Alessandro Massi

Beilstein J. Org. Chem. 2016, 12, 2719–2730, doi:10.3762/bjoc.12.268

• -unsaturated acceptors [27][28][29]. Indeed, activation of aromatic α-diketones may occur through a double electron-transfer (ET) process triggered by the carbamoyl anion derived from N,N-dimethylformamide (DMF) solvent with catalytic base, which generates an enediolate anion as key reactive species of

• heterogeneous continuous-flow procedure for the polarity reversal of aromatic α-diketones is presented. Propaedeutic batch experiments have been initially performed to select the optimal supported base capable to initiate the two electron-transfer process from the carbamoyl anion of the N,N-dimethylformamide

• (DMF) solvent to the α-diketone and generate the corresponding enediolate active species. After having identified the 2-tert-butylimino-2-diethylamino-1,3-dimethylperhydro-1,3,2-diazaphosphorine on polystyrene (PS-BEMP) as the suitable base, packed-bed microreactors (pressure-resistant stainless-steel

Efficient mechanochemical synthesis of regioselective persubstituted cyclodextrins

• Laszlo Jicsinszky,
• Marina Caporaso,
• Katia Martina,
• Emanuela Calcio Gaudino and
• Giancarlo Cravotto

Beilstein J. Org. Chem. 2016, 12, 2364–2371, doi:10.3762/bjoc.12.230

• as sodium hydride, to activate the thiol group of 3-mercaptopropionic acid (MPA) and N,N-dimethylformamide (DMF) [16]. In the reaction solution and particularly on larger scales (from 10 g to kilo lab scale), impurities that arise from incomplete conversions, product and byproduct decomposition as

Rapid regio- and multi-coupling reactivity of 2,3-dibromobenzofurans with atom-economic triarylbismuths under palladium catalysis

• Maddali L. N. Rao,
• Jalindar B. Talode and
• Venneti N. Murty

Beilstein J. Org. Chem. 2016, 12, 2065–2076, doi:10.3762/bjoc.12.195

• -dimethylformamide (DMF) and N,N-dimethylacetamide (DMA) furnished lowered yields (Table 1, entries 6 and 7) in comparison with NMP solvent. Carrying out the cross-couplings at different temperatures also gave lower yields (Table 1, entries 8 and 9). Additionally, the stoichiometric combination of 3 equiv of 2,3

Hydroxy-functionalized hyper-cross-linked ultra-microporous organic polymers for selective CO₂ capture at room temperature

• Partha Samanta,
• Priyanshu Chandra and
• Sujit K. Ghosh

Beilstein J. Org. Chem. 2016, 12, 1981–1986, doi:10.3762/bjoc.12.185

• -(hydroxymethyl)anthracene, respectively (Figure 1). HCP-91 and HCP-94 have been synthesized by using a Friedel–Crafts alkylation reaction. The thus obtained as-synthesized compounds were washed repeatedly with dimethylformamide (DMF), methanol, water, chloroform, dichloromethane and tetrahydrofuran (THF) to

TMSBr-mediated solvent- and work-up-free synthesis of α-2-deoxyglycosides from glycals

• Mei-Yuan Hsu,
• Yi-Pei Liu,
• Sarah Lam,
• Su-Ching Lin and
• Cheng-Chung Wang

Beilstein J. Org. Chem. 2016, 12, 1758–1764, doi:10.3762/bjoc.12.164

• , dimethylformamide (DMF) (64%, Table 2, entry 2) [76], acetonitrile (ACN) [74] (44%, Table 2, entry 3), tetrahydrofuran (THF) (56%, Table 2, entry 4), and dioxane [75] (50%, Table 2, entry 5) were tested as glycosylation modulators and similar yields of 25 were obtained, but their α-selectivities dramatically

Rh-Catalyzed reductive Mannich-type reaction and its application towards the synthesis of (±)-ezetimibe

• Motoyuki Isoda,
• Kazuyuki Sato,
• Yurika Kunugi,
• Satsuki Tokonishi,
• Atsushi Tarui,
• Masaaki Omote,
• Hideki Minami and
• Akira Ando

Beilstein J. Org. Chem. 2016, 12, 1608–1615, doi:10.3762/bjoc.12.157

• 0.25 mm × 15 m, carrier; He). Peak areas were calculated on a Hitachi D-2500 Chromato-Integrator. Materials Tetrahydrofuran (THF) was purchased from Kanto Chemical Co. Inc. (Tokyo, Japan) in the dehydrated form. N,N-Dimethylformamide (DMF) and dichloromethane (CH2Cl2) were distilled over CaH2 and

Flow carbonylation of sterically hindered ortho-substituted iodoarenes

• Carl J. Mallia,
• Gary C. Walter and
• Ian R. Baxendale

Beilstein J. Org. Chem. 2016, 12, 1503–1511, doi:10.3762/bjoc.12.147

• . Interestingly the addition of up to 20 mol % of dimethylformamide (DMF) as an additive did not improve the yield which had been suggested by evaluation of similar reactions in the literature [6][10]. However as anticipated, an increase in carbon monoxide pressure did pertain to a raise in product yield to 62

Mycothiol synthesis by an anomerization reaction through endocyclic cleavage

• Shino Manabe and
• Yukishige Ito

Beilstein J. Org. Chem. 2016, 12, 328–333, doi:10.3762/bjoc.12.35

• -disaccharide 2 in 90% yield (Scheme 4). After removing the phthaloyl and acetyl groups by using ethylenediamine in dimethylformamide (DMF), a carbamate group was introduced using triphosgene in the presence of NaHCO3. Acetylation of both the hydroxy and carbamate groups was carried out using acetic anhydride

Synthesis and photophysical characteristics of polyfluorene polyrotaxanes

• Aurica Farcas,
• Giulia Tregnago,
• Ana-Maria Resmerita,
• Pierre-Henri Aubert and
• Franco Cacialli

Beilstein J. Org. Chem. 2015, 11, 2677–2688, doi:10.3762/bjoc.11.288

• the generation of active layers in organic electronic devices. Experimental Materials and methods 1, 2, tetrakis(triphenylphosphine)palladium(0) [Pd(PPh3)4], β- and γCD, bromobenzene (Br–Ph), dimethylformamide (DMF), dimethyl sulfoxide (DMSO), and quinine sulfate dehydrate in 0.5 M sulfuric acid were