When metal-catalyzed C–H functionalization meets visible-light photocatalysis

• Lucas Guillemard and
• Joanna Wencel-Delord

Beilstein J. Org. Chem. 2020, 16, 1754–1804, doi:10.3762/bjoc.16.147

• electron transfer to complete the catalytic cycle and regenerate the active catalytic species. The classical Fujiwara–Moritani reaction promoting the addition of arenes to olefins illustrates a general mechanism for such traditional C–H functionalization (Figure 4, left) [70][71][72]. The insertion of a

• , together with a metal hydride or a low-valent metal complex. Hence, in order to reoxidize the metal catalyst, excess of an external oxidant, such as Cu(II) or Ag(I) salts, was frequently used. On the other hand, photoredox catalysis has been mainly employed for electron-transfer reactions and, remarkably

• of the photocatalyst in the absence of oxygen, suggesting that a direct electron transfer from the photosensitizer allowed the reoxidation of the active catalyst. However, the participation of molecular oxygen cannot be excluded. Rueping further demonstrated the capacity of the dual catalytic systems

Photoredox-catalyzed silyldifluoromethylation of silyl enol ethers

• Vyacheslav I. Supranovich,
• Vitalij V. Levin and
• Alexander D. Dilman

Beilstein J. Org. Chem. 2020, 16, 1550–1553, doi:10.3762/bjoc.16.126

• strongly reducing catalysts may be associated with the ability of gold to interact with the bromine atom of silane 1 followed by inner-sphere electron transfer [27]. The radical then attacks silyl enol ether 2, and the subsequent silyloxy-substituted radical is oxidized by the photocatalyst to generate the

Heterogeneous photocatalysis in flow chemical reactors

• Christopher G. Thomson,
• Ai-Lan Lee and
• Filipe Vilela

Beilstein J. Org. Chem. 2020, 16, 1495–1549, doi:10.3762/bjoc.16.125

• visible light through single-electron transfer processes, now referred to as visible light photoredox catalysis (PRC). A similar query on the Web of Science for the term “Photoredox” clearly shows the surge in PRC research following those reports, from 2010 onwards (Figure 1A). However, what is

• within the proximity required for an electron transfer or energy transfer process to occur. Substrate reduction and oxidation by an excited electron and hole, respectively, returns the semiconductor to its initial state and activates the substrate to further reactivity at the surface or in the bulk

• spectrum through direct VB/adsorbate electron transfer transitions [93][94]. HPCats modified with coordinating transition metal complexes also usually display significant changes to their absorption spectrum through the introduction of metal-to-ligand, ligand-to-metal, ligand-to-ligand, and metal-to-metal

An overview on disulfide-catalyzed and -cocatalyzed photoreactions

• Yeersen Patehebieke

Beilstein J. Org. Chem. 2020, 16, 1418–1435, doi:10.3762/bjoc.16.118

• . Under photoirradiation, organic disulfides can be easily cleaved into free thiyl radicals (RS•) and can reversibly add to unsaturated multiple bonds to catalyze a variety of functionalization reactions under mild conditions. In photoredox catalysis reactions, an excellent electron transfer ability and

• . Huang and co-workers proposed a polar radical crossover cycloaddition mechanism for this Diels–Alder cycloaddition (Scheme 6). The electron transfer from the electron-rich styrene 14 to the activated acridinium photocatalyst 15 oxidizes the styrene 14 to form the styrene radical 16 and the acridine

• alcohol by the thiyl radical produces thiophenol and an allylic radical. Next, the single-electron transfer (SET) from the allylic radical to another thiyl radical generates the allylic cation. Subsequently, the proton abstraction from the hydroxy group by the SET-generated thiolate gives the final

Recent synthesis of thietanes

• Jiaxi Xu

Beilstein J. Org. Chem. 2020, 16, 1357–1410, doi:10.3762/bjoc.16.116

• -Diphenylsilacyclopentadiene (324) underwent a photo-induced [2 + 2] cycloaddition with CS2 to afford two regioisomeric fused thietane-2-thiones 325 and 326. The electron transfer from the singlet-excited state of silacyclopentadiene to CS2 was shown to play an important role in the cycloaddition [90] (Scheme 61). 3.1.2

Distinctive reactivity of N-benzylidene-[1,1'-biphenyl]-2-amines under photoredox conditions

• Shrikant D. Tambe,
• Kwan Hong Min,
• Naeem Iqbal and
• Eun Jin Cho

Beilstein J. Org. Chem. 2020, 16, 1335–1342, doi:10.3762/bjoc.16.114

• -coupled single-electron transfer in the presence of an Ir photocatalyst. On the other hand, symmetrical 1,2-diamines were selectively produced from the same starting materials by the judicious choice of the reaction conditions, showcasing the distinct reactivity of N-benzylidene-[1,1'-biphenyl]-2-amines

• quenched by single-electron transfer from Cy2NMe, resulting in the generation of the highly reducing [IrII] species and the radical cation A. To validate the reductive quenching pathway, we carried out Stern−Volmer quenching experiments (Figure S1, Supporting Information File 1). The emission intensity of

• the excited Ir complex significantly decreased in proportion to the concentration of Cy2NMe, while it was much less affected by the concentration of 1a, confirming the proposed working mode. The formation of 2a might be attributed to the proton-coupled electron transfer [62][63][64][65][66] from [IrII

[3 + 2] Cycloaddition with photogenerated azomethine ylides in β-cyclodextrin

• Margareta Sohora,
• Leo Mandić and
• Nikola Basarić

Beilstein J. Org. Chem. 2020, 16, 1296–1304, doi:10.3762/bjoc.16.110

• complex molecules and natural products [11] since the pioneering work of Kanaoka et al. [12]. Photochemical reactions of phthalimides include H-abstractions, cycloadditions and photoinduced electron transfer (PET)[13]. We became interested in the application of photochemical H-abstraction reactions

Photocatalysis with organic dyes: facile access to reactive intermediates for synthesis

• Stephanie G. E. Amos,
• Marion Garreau,
• Luca Buzzetti and
• Jerome Waser

Beilstein J. Org. Chem. 2020, 16, 1163–1187, doi:10.3762/bjoc.16.103

• central role in the rapid expansion of photocatalytic methods [12]. These catalysts typically absorb light in the blue region and promote different activation modes, including photoinduced electron transfer (PET) and energy transfer (EnT), which respectively lead to the formation of open-shell and

• photocatalysts interact with organic molecules via three main pathways: electron transfer (ET), EnT, and atom transfer (AT). In the first case (Scheme 1, box 1), the excited photocatalyst (PC*) undergoes a single-electron transfer (SET) with a suitable electron acceptor A or electron donor D. In an oxidative

• photocatalyst PC•− and the oxidized donor D•+. Following this initial SET, a second electron transfer must occur to ensure the catalyst turnover and restore the ground state photocatalyst: PC•+ needs to be reduced by an electron donor D, whereas PC•− needs to undergo an oxidation by an electron acceptor A. In

Synthesis and properties of tetrathiafulvalenes bearing 6-aryl-1,4-dithiafulvenes

• Aya Yoshimura,
• Hitoshi Kimura,
• Kohei Kagawa,
• Mayuka Yoshioka,
• Toshiki Itou,
• Dhananjayan Vasu,
• Takashi Shirahata,
• Hideki Yorimitsu and
• Yohji Misaki

Beilstein J. Org. Chem. 2020, 16, 974–981, doi:10.3762/bjoc.16.86

• technique was applied [44]. As a result, the observed redox waves of 1a matched the simulated waves (Table 2). It was indicated that the redox wave at +0.10 V was due to an overlap of the sequential two stages of the one- and two-electron transfer waves at +0.07 and +0.12 V, while the other waves

• corresponded to one-electron transfer processes. The simulation results of 1a also showed that the redox wave simulated at +0.020 V might have been derived from the central TTF moiety because of the close ΔE values (+0.40 V for 1a and +0.46 V for TTF). The same discussion was applied to 1b. In addition, the

• (Table 2). The comparison of the peak currents of each wave indicated that the redox wave observed at +0.09 V involved a two-electron transfer, while the redox waves observed at −0.05 and +0.49 V corresponded to one-electron transfer processes (see the differential pulse voltammetry (DPV) in Supporting

Recent applications of porphyrins as photocatalysts in organic synthesis: batch and continuous flow approaches

• Rodrigo Costa e Silva,
• Luely Oliveira da Silva,
• Aloisio de Andrade Bartolomeu,
• Timothy John Brocksom and
• Kleber Thiago de Oliveira

Beilstein J. Org. Chem. 2020, 16, 917–955, doi:10.3762/bjoc.16.83

• , 68502-100, Brazil 10.3762/bjoc.16.83 Abstract In this review we present relevant and recent applications of porphyrin derivatives as photocatalysts in organic synthesis, involving both single electron transfer (SET) and energy transfer (ET) mechanistic approaches. We demonstrate that these highly

• adequate tuning of the porphyrin properties can enable them to absorb light in almost all of the UV–vis spectral range. Porphyrins also have elevated molar absorptivity (ca 105 L·mol−1·cm−1) and appropriate electronic levels for both energy transfer (ET) and single electron transfer (SET) in many

• porphyrin is in the triplet excited state, two distinct processes can be observed: a) single electron transfer (SET); and b) energy transfer (Figure 2) [12][13][14]. The first involves the exchange of electrons between the porphyrin and the substrate by an oxidative or reductive process, and the second

Cation-induced ring-opening and oxidation reaction of photoreluctant spirooxazine–quinolizinium conjugates

• Phil M. Pithan,
• Sören Steup and
• Heiko Ihmels

Beilstein J. Org. Chem. 2020, 16, 904–916, doi:10.3762/bjoc.16.82

• -step electron transfer from the merocyanine to the metal cations, which acted as electron acceptors. Similarly, Malatesta et al. found that the thermal dark reaction of spironaphthoxazines in the presence of a suitable electron acceptor, such as 7,7,8,8-tetracyanoquinodimethane, gave the corresponding

• naphthoxazole derivatives as a result of electron-transfer processes [76]. To compare our results with the literature data, we performed a corresponding control experiment under the exclusion of oxygen. Thus, upon the addition of Cu2+ to 3a, the oxazole 4a was formed in the same manner as under aerobic

• conditions, indicating an electron transfer from a reaction intermediate to the copper ions. In addition, we tested whether 4a may also be formed upon the addition of the previously not employed Fe3+ ion as this also acts as a strong electron acceptor (Figure 6B). Indeed, the addition of Fe3+ to 3a resulted

Copper catalysis with redox-active ligands

• Agnideep Das,
• Yufeng Ren,
• Cheriehan Hessin and
• Marine Desage-El Murr

Beilstein J. Org. Chem. 2020, 16, 858–870, doi:10.3762/bjoc.16.77

• electron transfer. This review aims to present the latest results in the area of copper-based cooperative catalysis with redox-active ligands. Keywords: bioinspired catalysis; biomimetic copper complexes; cooperative catalysis; redox-active ligands; redox catalysis; Introduction Interaction of earth

• . Among other tasks, copper enzymes are known to be actively involved in electron transfer as exemplified by blue copper enzymes, which have captured the interest of chemists and biochemists. Copper can also cooperate with iron to perform activation of O2 and nitrogen oxides (NOx) in cytochrome c oxidases

• 6D, in which the H-atom is transferred from the secondary benzylic sp3 carbon to the redox-active ligand, acting as a cooperative H-atom acceptor. Following a proton-coupled electron transfer (PCET) to generate 6E, the oxidized product (benzaldehyde) is released and final elimination of H2O2

Aldehydes as powerful initiators for photochemical transformations

• Maria A. Theodoropoulou,
• Nikolaos F. Nikitas and
• Christoforos G. Kokotos

Beilstein J. Org. Chem. 2020, 16, 833–857, doi:10.3762/bjoc.16.76

• aliphatic acids and the coupling of the residual chain with various electrophiles. Metal-based catalysts are common in reactions that require a high redox potential for a single electron transfer (SET) procedure to take place. On the other hand, even if organocatalysts have lower redox potentials, they are

• yield. The drop in the yield was insignificant in the absence of oxygen. An insignificant drop in the yield was also noticed when an electron scavenger, CuCl2, was added to the reaction mixture, excluding a single electron transfer process. When a triplet state quencher, anthracene, was added, the

Photocatalytic deaminative benzylation and alkylation of tetrahydroisoquinolines with N-alkylpyrydinium salts

• David Schönbauer,
• Carlo Sambiagio,
• Timothy Noël and
• Michael Schnürch

Beilstein J. Org. Chem. 2020, 16, 809–817, doi:10.3762/bjoc.16.74

• , electrophilic alkyl radicals were used in several transformations, such as electrophilic cross couplings under nickel catalysis, either with boronic acids [35] or different (aryl)halides [36][37][38]. Furthermore, visible light-promoted uncatalyzed electron transfer via the formation of electron donor–acceptor

Towards triptycene functionalization and triptycene-linked porphyrin arrays

• Gemma M. Locke,
• Keith J. Flanagan and
• Mathias O. Senge

Beilstein J. Org. Chem. 2020, 16, 763–777, doi:10.3762/bjoc.16.70

• evident linearity in these systems. Moreover, initial UV–vis and fluorescence studies show the promise of triptycene as a linker for electron transfer studies, showcasing its isolating nature. Keywords: BODIPY; Pd-catalyzed cross-coupling; porphyrins; Sonogashira cross-coupling; triptycene; Introduction

• of π-electrons. Consequently, it is necessary to design molecules, capable of achieving an energy- and/or electron-transfer process without causing serious electronic delocalization and/or an energy sink. A key goal of recent research into multiporphyrin arrays is modulating the absorption profile

• complexes such as 2 were synthesized by us with the purpose of conducting electron transfer studies [25]. Both Suzuki and Sonogashira cross-coupling reactions were employed to realize this new class of triptycene-linked trimeric porphyrins. The three porphyrins, or three BODIPYs in 2 were either linked

Recent advances in Cu-catalyzed C(sp³)–Si and C(sp³)–B bond formation

• Balaram S. Takale,
• Ruchita R. Thakore,
• Elham Etemadi-Davan and
• Bruce H. Lipshutz

Beilstein J. Org. Chem. 2020, 16, 691–737, doi:10.3762/bjoc.16.67

• leading to an electron transfer to the iodine atom, thereby liberating iodide, an alkyl radical, and a radical cation of the Cu complex. Recombination of the latter radicals leads to the formation of the desired silane along with the regeneration of the active Cu species (Scheme 8). This strategy was also

Recent advances in photocatalyzed reactions using well-defined copper(I) complexes

• Mingbing Zhong,
• Xavier Pannecoucke,
• Philippe Jubault and
• Thomas Poisson

Beilstein J. Org. Chem. 2020, 16, 451–481, doi:10.3762/bjoc.16.42

• in photocatalysis using copper complexes. Their applications in various reactions, such as ATRA, reduction, oxidation, proton-coupled electron transfer, and energy transfer reactions are discussed. Keywords: ATRA reactions; copper catalysis; energy transfer; oxidation; PCET reactions; photocatalysis

• . The use of either homoleptic or heteroleptic complexes in atom transfer radical addition (ATRA) reactions, reductions, oxidations, proton-coupled electron transfer (PCET) reactions, and reactions based on energy transfer will be discussed. 1 Homoleptic Cu(I) complexes Homoleptic complexes based on

• ketones and furanyl ketones, for instance, with good yield. To explain the reaction outcome, the authors suggested that the [Cu(I)(dap)2]Cl catalyst acted as an electron shuttle between the halide derivative and the allylmetal reagent, precluding a direct electron transfer between the allylstannane and

Photophysics and photochemistry of NIR absorbers derived from cyanines: key to new technologies based on chemistry 4.0

• Bernd Strehmel,
• Christian Schmitz,
• Ceren Kütahya,
• Yulian Pang,
• Anke Drewitz and
• Heinz Mustroph

Beilstein J. Org. Chem. 2020, 16, 415–444, doi:10.3762/bjoc.16.40

• their use in applications based on sensitized photoinduced electron transfer. This can be NIR-sensitized photopolymerization resulting in formation of initiating radicals and conjugate acid [5][6][13][14][15][63][64]. Recently, the use of NIR-LEDs exhibiting high excitation intensity brought more light

• in this field and helped to understand the function of existing intrinsic barrier in such systems comprising cationic cyanines in photoinduced electron transfer systems [65]. Furthermore, the huge amount of heat released by nonradiative deactivation of the excited state brings up to use them as

• emission between 800–1100 nm. Such findings enforce activities to make absorbers exhibiting internal barriers in photoinduced electron transfer reactions [72] resulting in a certain white light stability under ambient light conditions. Such properties can be seen as a big benefit from a practical point of

Visible-light-induced addition of carboxymethanide to styrene from monochloroacetic acid

• Kaj M. van Vliet,
• Nicole S. van Leeuwen,
• Albert M. Brouwer and
• Bas de Bruin

Beilstein J. Org. Chem. 2020, 16, 398–408, doi:10.3762/bjoc.16.38

• bond by electron transfer into the C–Cl antibonding orbital (Scheme 4A), the same intermediate can be formed by fragmentation of an α-haloketyl radical (Scheme 4B). The acidic environment could lead to easier formation of this ketyl radical. Intuitively, pathway B seems most probable. The reaction in

• (ppy)3]+ (+0.77 V vs SCE) is insufficient to oxidatively decarboxylate an acetate intermediate (≈ +1.2 V vs SCE). Unexpected electron transfer pathways can be considered, such as the self-decarboxylation that was previously observed for a [Cl3CCO2H][O2CCl3] mixture [57]. Inspired by the result above on

Copper-promoted/copper-catalyzed trifluoromethylselenolation reactions

• Clément Ghiazza and
• Anis Tlili

Beilstein J. Org. Chem. 2020, 16, 305–316, doi:10.3762/bjoc.16.30

• . Mechanistically, the authors proposed that an electron transfer took place between the copper(I) complex and ICF2CO2Et, forming, after iodine transfer, a new carbon-centered radical and a copper(II) complex. The center of the radical then shifted to the terminal carbon atom of the unsaturated compound. The latter

Recent developments in photoredox-catalyzed remote ortho and para C–H bond functionalizations

• Rafia Siddiqui and
• Rashid Ali

Beilstein J. Org. Chem. 2020, 16, 248–280, doi:10.3762/bjoc.16.26

• functionalization has been done either using transition metal catalysis or organocatalysis, through the installation of directing groups next to the targeted C–H bond, or by employing radical tactics based on single-electron transfer (SET) [15][16][17][18][19][20][21][22][23][24][25][26][27]. Although

• into chemical energy via the generation of reactive intermediates through electron transfer reactions. A photochemical reaction is directed by the photophysical properties of an electronically excited molecule. The first vibrational equilibrated singlet excited state is S1, and it depends on both

• electron transfer and modification of the oxidation state of the transition metal complexes. Such systems can be combined with different metals, for example, Ni, Co, Cu, Ru, Ir, etc. However, unexpectedly, copper is less toxic and can be utilized to catalyze reactions without the requirement of a ligand

Photoreversible stretching of a BAPTA chelator marshalling Ca²⁺-binding in aqueous media

• Aurélien Ducrot,
• Arnaud Tron,
• Robin Bofinger,
• Ingrid Sanz Beguer,
• Jean-Luc Pozzo and
• Nathan D. McClenaghan

Beilstein J. Org. Chem. 2019, 15, 2801–2811, doi:10.3762/bjoc.15.273

• electron-transfer reaction, while ion binding blocks this quenching pathway restoring emission. Thus, ion liberation from 1 and transfer to 3 would result in a fluorescence off–on switching of the latter. To perform the ion-transfer experiment, the fluorescent dye is loaded with one equivalent of Ca2

A review of asymmetric synthetic organic electrochemistry and electrocatalysis: concepts, applications, recent developments and future directions

• Munmun Ghosh,
• Valmik S. Shinde and
• Magnus Rueping

Beilstein J. Org. Chem. 2019, 15, 2710–2746, doi:10.3762/bjoc.15.264

• camphorsulfonate 58 as a chiral supporting electrolyte [58]. This resulted in the corresponding α-acetoxy ketones 59, with low to moderate ee values (Scheme 23). Chiral mediators Chiral mediators are substances that allow or facilitate homogeneous electron transfer from the electrode to the substrate. This could

Arylisoquinoline-derived organoboron dyes with a triaryl skeleton show dual fluorescence

• Vânia F. Pais,
• Tristan Neumann,
• Ignacio Vayá,
• M. Consuelo Jiménez,
• Abel Ros and
• Uwe Pischel

Beilstein J. Org. Chem. 2019, 15, 2612–2622, doi:10.3762/bjoc.15.254

• electron-transfer phenomena or two-photon absorption [32][33][34][35][36]. As part of our research program we have developed arylisoquinolines that integrate a boronic acid ester [37][38][39] or a BMes2 unit [6][40]. The presence of the boron-substituent confers interesting photophysical properties to

Small anion-assisted electrochemical potential splitting in a new series of bistriarylamine derivatives: organic mixed valency across a urea bridge and zwitterionization

• Keishiro Tahara,
• Tetsufumi Nakakita,
• Alyona A. Starikova,
• Takashi Ikeda,
• Masaaki Abe and
• Jun-ichi Kikuchi

Beilstein J. Org. Chem. 2019, 15, 2277–2286, doi:10.3762/bjoc.15.220

• intramolecular electron transfer phenomena and application in molecular devices [1][2][3][4][5]. The radical cations of bistriarylamine derivatives bis(NAr3) are well-known MV compounds having π-conjugated bridges (where NAr3 = triarylamine) [6][7][8][9][10][11][12][13][14][15][16][17][18]. These studies focused

• used for anion recognition [27][28][29]. In the oxidized state, the enhanced acidity of NH protons can increase the strength of H-bonds and give them more dynamic properties, which can be useful for refined designs of supramolecular systems [30] and proton-coupled electron-transfer systems [31][32][33

• uncertainty associated with the electron transfer distances in general organic MV systems [57][58]. As the IVCT bandwidth at half-height for 1b+ is broader than the high-temperature limit (47.94 × (Δυ1/2)1/2 = 4,120 cm−1) [6], 1b+ is regarded as a class II system. The HAB value for 1b+ is by a factor of 4.9