Photocatalytic formation of carbon–sulfur bonds

• Alexander Wimmer and
• Burkhard König

Beilstein J. Org. Chem. 2018, 14, 54–83, doi:10.3762/bjoc.14.4

• . General concepts, synthetic strategies and the substrate scope of reactions yielding thiols, disulfides, sulfoxides, sulfones and other organosulfur compounds are discussed together with the proposed mechanistic pathways. Keywords: disulfides; photocatalysis; sulfones; sulfoxides; thiols; visible light

• ; Introduction Visible-light photoredox catalysis has developed into an important tool for organic synthesis in the last two decades. Energy-efficient and cheap visible-light-emitting diodes are perfect light sources allowing chemists now to conduct photocatalyzed reactions without special or expensive equipment

• . Photoredox-active metal complexes or organic dyes are used to initiate photo-induced single-electron transfer (SET) processes upon excitation with visible-light. Such photooxidations or photoreductions yield reactive organic radicals, which can undergo unique bond forming reactions, under very mild

CF₃SO₂X (X = Na, Cl) as reagents for trifluoromethylation, trifluoromethylsulfenyl-, -sulfinyl- and -sulfonylation and chlorination. Part 2: Use of CF₃SO₂Cl

• Hélène Chachignon,
• Hélène Guyon and
• Dominique Cahard

Beilstein J. Org. Chem. 2017, 13, 2800–2818, doi:10.3762/bjoc.13.273

• the presence of Eosin Y under visible light irradiation (Scheme 2) [9]. Acetophenone derivatives with various substitution patterns as well as aliphatic or heteroaromatic ketones were equally well tolerated. This methodology offered the advantage of minimising the chlorination side reaction

• interestingly, when the reaction was performed using an aryl or alkylsulfonyl chloride, instead of trifluoromethanesulfonyl chloride, no extrusion of the SO2 moiety was observed, and the sulfonated products were recovered. The reaction mechanism involved excitation of the iridium catalyst under visible light to

• visible light irradiation, a first SET reduction of CF3SO2Cl occurred, ultimately leading to the formation of the stabilised trifluoromethyl radical after releasing SO2 and chloride anion. This electron deficient radical was then added on the most electron-rich position of the arene substrate to yield

CF₃SO₂X (X = Na, Cl) as reagents for trifluoromethylation, trifluoromethylsulfenyl-, -sulfinyl- and -sulfonylation. Part 1: Use of CF₃SO₂Na

• Hélène Guyon,
• Hélène Chachignon and
• Dominique Cahard

Beilstein J. Org. Chem. 2017, 13, 2764–2799, doi:10.3762/bjoc.13.272

• the presence of the organic photocatalyst N-methyl-9-mesitylacridinium (17), CF3SO2Na was converted into CF3• upon visible-light irradiation. The CF3• radical reacted with the vinyl azide to give the iminyl radical 18 that was reduced by Mes-Acr• (Mes-Acr: 9-mesityl-10-methylacridinium) into the

• electron oxidation of CF3SO2Na was performed by visible-light activated N-methyl-9-mesitylacridinium as a photoredox catalyst. Two hydrogen atom donors, 20 mol % of methyl thiosalicylate 38 for aliphatic alkenes (or 1 equiv of thiophenol 39 for styrenyl alkenes) and 2,2,2-trifluoroethanol (TFE), worked in

• authors also realised the same chemical transformation under visible light irradiation at 450 nm by means of the iridium photocatalyst Ir[dF(CF3)ppy]2(dtbbpy)PF6 ([4,4’-bis(tert-butyl)-2,2’-bipyridine]bis[3,5-difluoro-2-[5-(trifluoromethyl)-2-pyridinyl]phenyl]iridium(III) hexafluorophosphate), which

Mechanochemical synthesis of small organic molecules

• Tapas Kumar Achar,
• Anima Bose and
• Prasenjit Mal

Beilstein J. Org. Chem. 2017, 13, 1907–1931, doi:10.3762/bjoc.13.186

• /energy, etc. Non-conventional energy sources for chemical reactions such as microwave, mechanical mixing, visible-light and ultrasound are becoming surge of interest to the chemist as alternative energy sources in laboratories [7]. By imposing these techniques innumerable chemical transformations have

Oxidative dehydrogenation of C–C and C–N bonds: A convenient approach to access diverse (dihydro)heteroaromatic compounds

• Santanu Hati,
• Ulrike Holzgrabe and
• Subhabrata Sen

Beilstein J. Org. Chem. 2017, 13, 1670–1692, doi:10.3762/bjoc.13.162

• the presence of visible light and catalytic MgI2 was described [89]. The reaction takes about 8–72 hours to complete depending on the substituents present in starting amines and aldehydes (Scheme 28). Initial condensation of 2-aminobenzylamine with an aldehyde generates 2-aryl-1,2,3,4

Synthesis and metal binding properties of N-alkylcarboxyspiropyrans

• Alexis Perry and
• Christina J. Kousseff

Beilstein J. Org. Chem. 2017, 13, 1542–1550, doi:10.3762/bjoc.13.154

• binding occurs as a result of stabilisation of the zwitterionic merocyanine isomer via phenoxide–metal complexation [17] (Figure 1). Commonly, merocyanines undergo photoreversion to their corresponding spiropyran under visible light irradiation and metal complexation is usually achieved either in darkness

Mechanochemical borylation of aryldiazonium salts; merging light and ball milling

• José G. Hernández

Beilstein J. Org. Chem. 2017, 13, 1463–1469, doi:10.3762/bjoc.13.144

• the original study, irradiation for 18 h of a MeCN solution of aryldiazonium salts, bis(pinacolato)diboron (B2pin2, 2) and eosin Y with a 25 W visible light lamp led to the corresponding arylboronates in moderate to good yields [18]. Results and Discussion To commence, a PMMA milling jar was designed

Detection of therapeutic radiation in three-dimensions

• John A. Adamovics

Beilstein J. Org. Chem. 2017, 13, 1325–1331, doi:10.3762/bjoc.13.129

• ferrous/agarose/xylenol orange (FAX) gel shows visible-light absorption at 440 nm; after exposure to ionizing radiation, there is an increase in absorption at 585 nm. Even though diffusion has been diminished it continues to be an issue [12]. These diffusion limitations were overcome in a gel matrix by

Kinetic analysis of mechanoradical formation during the mechanolysis of dextran and glycogen

• Naoki Doi,
• Yasushi Sasai,
• Yukinori Yamauchi,
• Tetsuo Adachi,
• Masayuki Kuzuya and
• Shin-ichi Kondo

Beilstein J. Org. Chem. 2017, 13, 1174–1183, doi:10.3762/bjoc.13.116

• TCNE under visible-light irradiation. We adopted this method by Sakaguchi et al for the detection of mechanoanions (see Experimental). Figure 5 shows the observed ESR spectrum before and after visible-light irradiation of the fractured sample of Dx and TCNE. As no ESR spectrum was observed after the

• mechanochemical reaction of pure TCNE, it was assumed that the ESR spectrum depicted in Figure 5a might be ascribed to the radical produced by the reaction of Dx mechanoradical and TCNE. As the characteristics of the spectrum and the intensity before and after visible-light irradiation remained unaffected, there

• several hours at room temperature in the intensity and shape within a detectable extent. Procedure to detect mechanoanions Dx was fractured in a metallic vessel at room temperature. The fractured Dx and TCNE were mixed in the dark to avoid the decomposition of mechanoanion and exposed to visible light to

Chemoselective synthesis of diaryl disulfides via a visible light-mediated coupling of arenediazonium tetrafluoroborates and CS₂

• Jing Leng,
• Shi-Meng Wang and
• Hua-Li Qin

Beilstein J. Org. Chem. 2017, 13, 903–909, doi:10.3762/bjoc.13.91

• visible light-promoted coupling of readily accessible arenediazonium tetrafluoroborates and CS2. This practical and convenient protocol provides a direct pathway for the assembly of a series of disulfides in an environmentally friendly manner with good to excellent yields. Keywords: arenediazonium

• transformation of carbon disulfide into diaryl disulfides [11]. Sunlight as abundant and almost infinitely available energy resource has been widely used for chemical transformations in the sense of cost, safety, availability, and environmental friendliness [12][13][14][15]. Herein, we report a visible light

• and to minimize the formation of the byproducts was conducted. As recently surveyed, photoredox catalysts are widely employed for the generation of radicals for diverse radical reactions [19]. Further, the application of aryl radicals generated from aryldiazonium salts under visible light irradiation

How and why kinetics, thermodynamics, and chemistry induce the logic of biological evolution

• Addy Pross and
• Robert Pascal

Beilstein J. Org. Chem. 2017, 13, 665–674, doi:10.3762/bjoc.13.66

• that of biochemical intermediates like ATP, requires a free energy potential exceeding a value of 150 kJ mol−1, equivalent to that of visible light [4][55][56]. Therefore, it turns out that considering the kinetic conditions for dynamic kinetic stability leads to the definition of conditions for the

• instructive to note that this assessment is compatible with visible light as an energy source as well as moderate temperatures, both of which could be found at the surface of the early Earth. However, these considerations by themselves do not solve the question of the origin of life, or at least the point of

• of these entities leads to a semiquantitative assessment of the environmental conditions required for a self-organisation process, one based on established organic chemical processes. It is intriguing to note that this assessment is compatible with visible light as an energy source, and a moderate

Novel β-cyclodextrin–eosin conjugates

• Gábor Benkovics,
• Damien Afonso,
• András Darcsi,
• Szabolcs Béni,
• Sabrina Conoci,
• Éva Fenyvesi,
• Lajos Szente,
• Milo Malanga and
• Salvatore Sortino

Beilstein J. Org. Chem. 2017, 13, 543–551, doi:10.3762/bjoc.13.52

• successfully utilized in photodynamic therapy (PDT). This minimally invasive therapeutic approach has proven to be very well-suited for cancer and bacterial diseases treatment. The PDT is based on the combination of three main components: visible light, a photosensitizer (PS) and molecular oxygen [4][5]. After

• being excited with visible light, the PS – while reverting to the ground state – transfers the energy of its lowest excited triplet state to nearby molecular oxygen. This leads to an in situ generation of singlet oxygen (1O2), which is the main responsible species for cytotoxic reactions in cells [6

• nitric oxide under illumination with visible light, resulting in amplified cancer-cell mortality [9]. By attaching porphyrin to γ-CD and dimeric β-CD, which are both able to form inclusion complexes with cytotoxic drug molecules such as doxorubicin and paclitaxel, nanocarriers with multimodal therapeutic

3D printed fluidics with embedded analytic functionality for automated reaction optimisation

• Andrew J. Capel,
• Andrew Wright,
• Matthew J. Harding,
• George W. Weaver,
• Yuqi Li,
• Russell A. Harris,
• Steve Edmondson,
• Ruth D. Goodridge and
• Steven D. R. Christie

Beilstein J. Org. Chem. 2017, 13, 111–119, doi:10.3762/bjoc.13.14

• ) being picked up by the detector when the light source was inactive (Figure 2). This demonstrated that due to the transparency of the Accura 60 resin to visible light, even though the part would be housed inside a dark chamber, ideally the detection wavelengths for this material should be kept below 400

Copper-catalyzed asymmetric sp³ C–H arylation of tetrahydroisoquinoline mediated by a visible light photoredox catalyst

• Pierre Querard,
• Inna Perepichka,
• Eli Zysman-Colman and
• Chao-Jun Li

Beilstein J. Org. Chem. 2016, 12, 2636–2643, doi:10.3762/bjoc.12.260

• catalysts provide a mild and highly effective sp3 C–H asymmetric arylation of THIQs. Keywords: C–H arylation; copper catalyst; enantioselectivity; visible light; Introduction Functionalization of sp3 C–H bonds is a unique and powerful transformation in modern organic synthesis, which remains a challenging

• [2]. The emerging and expanding field of visible-light-mediated photoredox catalysis presents unique opportunities for the conception of new synthetic routes [3][4][5][6][7][8][9][10][11][12]. Upon exposure to visible light, photoredox catalysts can function as both reductant and oxidant, thereby

• allow us to design a visible-light-mediated photoredox asymmetric arylation of tetrahydroisoquinolines (THIQs) [15][16][17][18][19][20]. During the last decade, numerous examples of sp3 C–H bond arylation procedures have been developed [1][21][22][23][24][25][26][27][28][29]. In 2008, our group

A self-assembled cyclodextrin nanocarrier for photoreactive squaraine

• Ulrike Kauscher and
• Bart Jan Ravoo

Beilstein J. Org. Chem. 2016, 12, 2535–2542, doi:10.3762/bjoc.12.248

• , which have the disadvantage of an absorption wavelength in the range of visible light [8][9]. Visible light is scattered and absorbed by the inhomogeneous biological tissue. In order to optimise efficiency, it is vital to skew the absorption range of the PS towards the near infrared range. Then, the

A new protocol for the synthesis of 4,7,12,15-tetrachloro[2.2]paracyclophane

• Donghui Pan,
• Yanbin Wang and
• Guomin Xiao

Beilstein J. Org. Chem. 2016, 12, 2443–2449, doi:10.3762/bjoc.12.237

• was induced by adding 3 mol % of radical initiator (DBP or AMPA) and proceeded at 75 °C for 4 h (Table 1, entries 3 and 4). Though the yields in both processes increased, the selectivity of 2a decreased due to the formation of some excessive brominated byproducts. Then, we tried visible light as

• visible-light induced bromination with the H2O2–HBr system Analogous as described in [16], substituted p-xylene (1.0 mmol) was added to 2.0 mL solution (CCl4 or water) of 2.0 mmol of H2O2 (0.23 g, 30% H2O2 aqueous) and 1.1 mmol of HBr (0.22 g, 30% HBr aqueous). The mixture was stirred at 300 rpm at

• bromides from substituted (4-methylbenzyl)bromides. Bromination of 2,5-dichloro-p-xylene (1) with H2O2–HBr. Visible-light induced free-radical bromination of substituted p-xylenes with H2O2–HBr. Synthesis of 4,7,12,15-tetrachloro[2.2]paracyclophane 16 from 11. Synthesis of substituted [2.2]paracyclophanes

Solvent-free, visible-light photocatalytic alcohol oxidations applying an organic photocatalyst

• Martin Obst and
• Burkhard König

Beilstein J. Org. Chem. 2016, 12, 2358–2363, doi:10.3762/bjoc.12.229

• reaction mixture. The corresponding carbonyl compounds were obtained in moderate to good yields. Keywords: benzylic alcohol; oxidation; photocatalysis; solvent free; visible light; Introduction According to a classification made by Wilhelm Ostwald, one of the pioneers in the field of physical chemistry

• , is a rather new field of great academic interest. Namely, visible-light photocatalysis applying an organic, redox-active catalyst allows mild and efficient transformations. By exciting the photocatalyst, which then exchanges electrons with the substrate, light energy is converted into chemical energy

• substrates would be grinded under visible light irradiation. In contrast to mechanochemistry, the process would be driven by light energy and not by mechanical energy, but profit from the absence of toxic solvents, high concentrations of the substrate, and easy work-up. Furthermore, undesired effects of the

Enantioconvergent catalysis

• Justin T. Mohr,
• Jared T. Moore and
• Brian M. Stoltz

Beilstein J. Org. Chem. 2016, 12, 2038–2045, doi:10.3762/bjoc.12.192

• visible light (Scheme 4) [27]. Although the mechanism continues to be studied, it is hypothesized that irradiation of the copper–carbazole complex leads to an excited-state adduct that is capable of generating achiral tertiary alkyl radical intermediates through electron transfer with a racemic alkyl

A flow reactor setup for photochemistry of biphasic gas/liquid reactions

• Josef Schachtner,
• Patrick Bayer and
• Axel Jacobi von Wangelin

Beilstein J. Org. Chem. 2016, 12, 1798–1811, doi:10.3762/bjoc.12.170

• especially evident from a consideration of the extent of light attenuation when passing through condensed matter. The molar attenuation coefficients of common organic photosensitizers are in the range of 20,000–500,000 M−1 cm−1 (Table 1) which significantly limits the penetration depth of visible light into

• reactor parameters. The length of the tubing coil directly determines the residence time in the reactor. The FEP tubing does not exhibit a significant absorption of visible light [68]; furthermore, the reaction temperature can be easily set and controlled by immersing the reactor coil into a thermostat

• selective oxidations of various organic molecules (Scheme 5). From a conceptual point of view, the combination of two of the most abundant “reagents” on the surface of our planet, oxygen and visible light, with a safe, scalable, and efficient reactor technology for chemical reactions constitutes an approach

Rearrangements of organic peroxides and related processes

• Ivan A. Yaremenko,
• Vera A. Vil’,
• Dmitry V. Demchuk and
• Alexander O. Terent’ev

Beilstein J. Org. Chem. 2016, 12, 1647–1748, doi:10.3762/bjoc.12.162

Star-shaped and linear π-conjugated oligomers consisting of a tetrathienoanthracene core and multiple diketopyrrolopyrrole arms for organic solar cells

• Hideaki Komiyama,
• Chihaya Adachi and
• Takuma Yasuda

Beilstein J. Org. Chem. 2016, 12, 1459–1466, doi:10.3762/bjoc.12.142

• ability, and good miscibility with a fullerene derivative as an acceptor. Moreover, strong visible light photoabsorption ability for visible light is vital for the donor materials. Star-shaped molecules tethering multiple π-conjugated arms are capable of harvesting incident light effectively owing to

The role of alkyl substituents in deazaadenine-based diarylethene photoswitches

• Christopher Sarter,
• Michael Heimes and
• Andres Jäschke

Beilstein J. Org. Chem. 2016, 12, 1103–1110, doi:10.3762/bjoc.12.106

• isomer, BP: byproduct. Thermostability measurements of the 7-deazaadenosine nucleosides. A 60 µM solution of the compound in acetonitrile was irradiated with UV light until the (pseudo)-photostationary state was reached. Then UV irradiation was switched off and the absorption at the visible light maximum

Opportunities and challenges for direct C–H functionalization of piperazines

• Zhishi Ye,
• Kristen E. Gettys and
• Mingji Dai

Beilstein J. Org. Chem. 2016, 12, 702–715, doi:10.3762/bjoc.12.70

• starting materials. The reaction proceeds with excellent regio- and diastereoselectivity which is presumably due to a regio- and stereoselective alkene insertion into the strained metalla-aziridine intermediate 84. Photoredox catalysis Visible-light photoredox catalysis has emerged as a powerful platform

Supramolecular polymer assembly in aqueous solution arising from cyclodextrin host–guest complexation

• Jie Wang,
• Zhiqiang Qiu,
• Yiming Wang,
• Li Li,
• Xuhong Guo,
• Duc-Truc Pham,
• Stephen F. Lincoln and
• Robert K. Prud’homme

Beilstein J. Org. Chem. 2016, 12, 50–72, doi:10.3762/bjoc.12.7

• photo-responsive small molecules are azobenzene and its derivatives which isomerize from trans to cis and from cis to trans under irradiation with UV and visible light, respectively, and are potentially components of photo-responsive materials. In 2005, Harada et al. constructed a photo-responsive

• PAA3α-CD/PAAAzo and PAA6α-CD/PAAAzo host–guest complexation between the α-CD and azobenzene substituents are characterized by complexation constants, K = 1.4 × 102 and 1.2 × 104 M−1, respectively. Under visible light the viscosities of PAA3α-CD/PAAAzo and PAA6α-CD/PAAAzo are 6.5 × 10−1 and 2.5 × 102

Continuous formation of N-chloro-N,N-dialkylamine solutions in well-mixed meso-scale flow reactors

• A. John Blacker and
• Katherine E. Jolley

Beilstein J. Org. Chem. 2015, 11, 2408–2417, doi:10.3762/bjoc.11.262

• organozinc reagents to give amines [1]; iii) aldehydes to give amides [5][6][7]; iv) base to give imines [8]; v) alkyl and aryl C–H bonds in the presence of acid and visible light to form heterocycles [9][10]. Furthermore they have also been used for chlorination of aromatics in the presence of acid [11