Synthesis and characterization of bis(4-amino-2-bromo-6-methoxy)azobenzene derivatives

• David Martínez-López,
• Amirhossein Babalhavaeji,
• Diego Sampedro and
• G. Andrew Woolley

Beilstein J. Org. Chem. 2019, 15, 3000–3008, doi:10.3762/bjoc.15.296

• substituent in an attempt to enhance water solubility. Late-stage functionalization of the ortho-position was carried out through a palladium(II)-catalyzed C–H activation, resulting in ortho-brominated azobenzenes [21]. Photochemical characterization Despite the morpholino substituent, compound 4 was found to

Combining the Ugi-azide multicomponent reaction and rhodium(III)-catalyzed annulation for the synthesis of tetrazole-isoquinolone/pyridone hybrids

• Gerardo M. Ojeda,
• Prabhat Ranjan,
• Pavel Fedoseev,
• Lisandra Amable,
• Upendra K. Sharma,
• Daniel G. Rivera and
• Erik V. Van der Eycken

Beilstein J. Org. Chem. 2019, 15, 2447–2457, doi:10.3762/bjoc.15.237

• . Keywords: C–H activation; cyclization; isoquinolone; multicomponent reaction; tetrazole; Introduction Pyridones and isoquinolones are relevant heterocyclic scaffolds present in numerous bioactive compounds and natural products [1][2][3][4]. Similarly, molecules containing a tetrazole ring exhibit a wide

• could form isoquinolones and pyridones linked to a tetrazole ring, since such class of hybrid compounds is not described in the literature. Several protocols based on C–H activation or metal-catalyzed cyclizations are known to generate the isoquinolone and pyridone moieties and further assist their post

• regioselectivity, can be overcome when a suitable directing group assists the reaction [46][47]. Traditional directing groups for C–H activation include amide, hydroxamide, carboxylate, pyridyl, quinolyl, carbonyl, ether, hydroxy, oxazolinyl and cyano [47]. For example, Ackermann et al. reported a Ru(II)-catalyzed

Mono- and bithiophene-substituted diarylethene photoswitches with emissive open or closed forms

• A. Lennart Schleper,
• Mariano L. Bossi,
• Vladimir N. Belov and
• Stefan W. Hell

Beilstein J. Org. Chem. 2019, 15, 2344–2354, doi:10.3762/bjoc.15.227

• towards asymmetric DAEs. The thiophene- and bithiopheneboronic esters 9 and 12 were prepared as shown in Scheme 2. C–H activation of methyl thiophene-2-carboxylate in position 5 was achieved by using a bis(1,5-cyclooctadiene)di-μ-methoxydiiridium(I) catalyst with 4,4’-di-tert-butyl-2,2’-dipyridyl as

Recent advances in transition-metal-catalyzed incorporation of fluorine-containing groups

• Xiaowei Li,
• Xiaolin Shi,
• Xiangqian Li and
• Dayong Shi

Beilstein J. Org. Chem. 2019, 15, 2213–2270, doi:10.3762/bjoc.15.218

• NFSI to give the highly reactive species F–Pd(IV)1a)2-N(SO2Ph)2 (C), which produces the product 2a and reductive elimination intermediate 1a-Pd(II)-N(SO2Ph)2 (D). Finally, intermediate A regenerates from intermediate D by aid of the catalytic amount of HNO3 released during the C–H activation step. In

• the C–H activation event to the trifluoromethylated products, as described in Scheme 63. In this case, the specific catalytic mechanism remains to be studied. In 2011, the group of Liu [123] accomplished a Pd(II)-catalyzed oxidative trifluoromethylation of indoles with TMSCF3 and PhI(OAc)2 at room

Attempted synthesis of a meta-metalated calix[4]arene

• Christopher D. Jurisch and
• Gareth E. Arnott

Beilstein J. Org. Chem. 2019, 15, 1996–2002, doi:10.3762/bjoc.15.195

• strategy involved using a mesoionic carbene to direct C–H activation, but proved to form an unexpectedly unstable intermediate that was identified through high-resolution mass spectrometry. On route to our target, a new optimized method to mononitrocalix[4]arenes was developed, including optimized and high

• ] (see Figure 1), although two unusual methods have also been reported [16][17]. We have been looking at alternative methods for the meta-functionalization of calix[4]arenes, with the idea of C–H activation via transition metals appearing an attractive option. Lhoták and co-workers have already attempted

• this using a pyridyl sulfoxide directing group and palladium as the metal, but in this case the palladium caused a double C–H activation and formed an impressive bridge to the adjacent calix[4]arene aromatic ring [14]. The question for us was whether this bridge formation was a general principle or

Recent advances on the transition-metal-catalyzed synthesis of imidazopyridines: an updated coverage

• Gagandeep Kour Reen,
• Ashok Kumar and
• Pratibha Sharma

Beilstein J. Org. Chem. 2019, 15, 1612–1704, doi:10.3762/bjoc.15.165

• reactions, C–H activation/functionalization and coupling reactions are highlighted in this review article. The basic illustration of this review comprises of schemes with concise account of explanatory text. The schemes depict the reaction conditions along with a quick look into the mechanism involved to

• development and (ii) for the modifications needed thereof in the R&D sector. Keywords: C–H activation/functionalization; coupling reactions; imidazopyridines; multicomponent reactions; transition metal catalysis; Introduction The structural diversity and biological importance of nitrogen-containing

• greener oxidants [33]. During the writing of this review, we came across some reviews on IPs, however, their coverage is limited to the imidazo[1,2-a]pyridine nucleus deriving from either a particular starting material or to one type of reaction procedure (particularly C–H activation) with literature up

Mechanochemistry of supramolecules

• Anima Bose and
• Prasenjit Mal

Beilstein J. Org. Chem. 2019, 15, 881–900, doi:10.3762/bjoc.15.86

• acetic acid (for liquid-assisted grinding, LAG) led to the regioselective C–H activation (Figure 5) [58]. In 2008, the mechanochemical synthesis of both [2]- and [4]rotaxanes was reported by Chiu and co-workers. The reactions led to high yields of the products 12 and 13 under solvent-free conditions at a

Solid-phase synthesis of biaryl bicyclic peptides containing a 3-aryltyrosine or a 4-arylphenylalanine moiety

• Iteng Ng-Choi,
• Àngel Oliveras,
• Lidia Feliu and
• Marta Planas

Beilstein J. Org. Chem. 2019, 15, 761–768, doi:10.3762/bjoc.15.72

• cross-coupling reaction [15][16][17][18][19] or via a Pd-catalyzed C–H activation reaction [20][21]. We have used the former reaction for the solid-phase preparation of biaryl cyclic peptides bearing a Phe-Phe, a Phe-Tyr or a Tyr-Tyr linkage [22][23]. Our approach involved the synthesis of the linear

Synthesis of the aglycon of scorzodihydrostilbenes B and D

• Katja Weimann and
• Manfred Braun

Beilstein J. Org. Chem. 2019, 15, 610–616, doi:10.3762/bjoc.15.56

• , among them the aglycon of scorzodihydrostilbenes B and D. Keywords: C–H activation; hydroarylation; phenols; regioselectivity; ruthenium; Introduction Among phytochemicals with strong allelopathic effects, various natural products are found that feature the structural motif of dihydrostilbene with

• this article, we describe a synthetic approach that takes advantage of a regioselective, ruthenium-catalyzed C–H activation [6] and makes accessible not only the skeleton of dihydrostilbenes with multiple phenolic ether functionality but also the aglycon of scorzodihydrostilbenes B and D (2 and 4, R1

Intramolecular cascade annulation triggered by rhodium(III)-catalyzed sequential C(sp²)–H activation and C(sp³)–H amination

• Liangliang Song,
• Guilong Tian,
• Johan Van der Eycken and
• Erik V. Van der Eycken

Beilstein J. Org. Chem. 2019, 15, 571–576, doi:10.3762/bjoc.15.52

• -hydroxyacrylamides for the construction of indolizinones via sequential C(sp2)–H activation and C(sp3)–H amination has been developed. This approach shows excellent functional-group tolerance. The synthesized scaffold forms the core of many natural products with pharmacological relevance. Keywords: annulation; C–H

• activation; rhodium; acrylamide; heterocycles; Introduction Over the last decade, transition metal-catalyzed C(sp2)–H activation has emerged as an efficient strategy to access complex molecules [1][2][3][4][5][6]. Among the methodologies, RhIII-catalyzed oxidative annulation of a C(sp2)–H bond with 2π

A novel and efficient synthesis of phenanthrene derivatives via palladium/norbornadiene-catalyzed domino one-pot reaction

• Yue Zhong,
• Wen-Yu Wu,
• Shao-Peng Yu,
• Tian-Yuan Fan,
• Hai-Tao Yu,
• Nian-Guang Li,
• Zhi-Hao Shi,
• Yu-Ping Tang and
• Jin-Ao Duan

Beilstein J. Org. Chem. 2019, 15, 291–298, doi:10.3762/bjoc.15.26

• palladium-catalyzed reaction that results in phenanthrene derivatives using aryl iodides, ortho-bromobenzoyl chlorides and norbornadiene in one pot. This dramatic transformation undergoes ortho-C–H activation, decarbonylation and subsequent a retro-Diels–Alder process. Pleasantly, this protocol has a wider

• substrate range, shorter reaction times and higher yields of products than previously reported methods. Keywords: C–H activation; norbornadiene; palladium; phenanthrene derivatives; Introduction Phenanthrene is a polycyclic aromatic hydrocarbon which contains three benzene rings. The phenanthrenes can be

• is presented in Scheme 5. As is commonly considered, the aryl-PdII complex A is formed by oxidative addition of aryl iodide to the Pd0 complex, which is followed by the insertion of norbornadiene to the C–Pd bond of A to produce B. Then, an ortho-C–H activation reaction occurs to B, which offers

Oxidative radical ring-opening/cyclization of cyclopropane derivatives

• Yu Liu,
• Qiao-Lin Wang,
• Zan Chen,
• Cong-Shan Zhou,
• Bi-Quan Xiong,
• Pan-Liang Zhang,
• Chang-An Yang and
• Quan Zhou

Beilstein J. Org. Chem. 2019, 15, 256–278, doi:10.3762/bjoc.15.23

• the synthesis of carbonyl-containing alkyl-substituted heteroarenes 102 or 104 under mild conditions in moderate to good yields with good functional group tolerance (Scheme 22) [100]. This reaction went through a selective C(sp3)–C(sp3) bond cleavage, C–H activation and C(sp3)–C(sp2) bond formation

Ruthenium-based olefin metathesis catalysts with monodentate unsymmetrical NHC ligands

• Veronica Paradiso,
• Chiara Costabile and
• Fabia Grisi

Beilstein J. Org. Chem. 2018, 14, 3122–3149, doi:10.3762/bjoc.14.292

• , involves a pericyclic reaction followed by an irreversible oxidation step, and, finally, a rearomatization. To avoid the C–H activation of aryl-substituted NHC ligands the corresponding ortho positions have to be substituted by different groups. Indeed, almost contemporaneously, Grubbs et al. reported on

Gold-catalyzed post-Ugi alkyne hydroarylation for the synthesis of 2-quinolones

• Xiaochen Du,
• Jianjun Huang,
• Anton A. Nechaev,
• Ruwei Yao,
• Jing Gong,
• Erik V. Van der Eycken,
• Olga P. Pereshivko and
• Vsevolod A. Peshkov

Beilstein J. Org. Chem. 2018, 14, 2572–2579, doi:10.3762/bjoc.14.234

• derivatives with most recent strategies focusing on the implementation of transition metal-catalyzed C–H activation methods [35][36]. One of the common approaches towards 2-quinolones 2 involves the intramolecular Friedel–Crafts hydroarylation [37][38] of N-arylamides of 3-substituted propynoic acids 1

Cobalt- and rhodium-catalyzed carboxylation using carbon dioxide as the C1 source

• Tetsuaki Fujihara and
• Yasushi Tsuji

Beilstein J. Org. Chem. 2018, 14, 2435–2460, doi:10.3762/bjoc.14.221

• of methods for the catalytic carboxylation of less reactive C–H bonds with CO2 is crucial regarding both C–H activation and CO2 fixation processes. Mita and Sato reported a cobalt-catalyzed allylic C–H carboxylation of allylarenes (Scheme 10), in which 1-allyl-4-phenylbenzene (11a) was reacted with

A challenging redox neutral Cp*Co(III)-catalysed alkylation of acetanilides with 3-buten-2-one: synthesis and key insights into the mechanism through DFT calculations

• Andrew Kenny,
• Alba Pisarello,
• Arron Bird,
• Paula G. Chirila,
• Alex Hamilton and
• Christopher J. Whiteoak

Beilstein J. Org. Chem. 2018, 14, 2366–2374, doi:10.3762/bjoc.14.212

• widely applied in complex molecule synthesis; however, there is a significant disadvantage in the requirement for pre-functionalised substrates (commonly halides/triflates). Direct C–H activation protocols provide the opportunity for a novel approach to synthesis, although this field is still in its

• not the C–H activation step, but instead and unexpectedly, effective competition with more stable compounds (resting states) not involved in the catalytic cycle. Keywords: acetanilides; alkylation; C–H activation; cobalt catalysis; DFT studies; Introduction Controlled functionalisation of ubiquitous

• -established palladium-catalysed cross-coupling protocols [4]. Whilst second and third row transition metals are well applied in cross-coupling protocols through C–H activation under mild conditions [5], the drive to use first row metals continues to provide an exciting challenge [6]. The interest in the

Hydroarylations by cobalt-catalyzed C–H activation

• Rajagopal Santhoshkumar and
• Chien-Hong Cheng

Beilstein J. Org. Chem. 2018, 14, 2266–2288, doi:10.3762/bjoc.14.202

• Rajagopal Santhoshkumar Chien-Hong Cheng Department of Chemistry, National Tsing Hua University, Taiwan 10.3762/bjoc.14.202 Abstract As an earth-abundant first-row transition metal, cobalt catalysts offer a broad range of economical methods for organic transformations via C–H activation. One of

• recent developments of Co-catalyzed hydroarylation reactions and their mechanistic studies are summarized. Keywords: catalysis; C−C formation; C–H activation; cobalt; hydroarylation; Introduction For the last three decades, atom-economical synthetic approaches have played a substantial role in organic

• synthesis owing to the necessity of green chemistry for the modern universe [1][2][3]. In this context, catalytic C–H functionalization has been acknowledged as an atom- and step-economical process [4][5][6]. A wide range of transition metal-catalyzed non-directed or directing group assisted C–H activation

Cobalt-catalyzed peri-selective alkoxylation of 1-naphthylamine derivatives

• Jiao-Na Han,
• Cong Du,
• Xinju Zhu,
• Zheng-Long Wang,
• Yue Zhu,
• Zhao-Yang Chu,
• Jun-Long Niu and
• Mao-Ping Song

Beilstein J. Org. Chem. 2018, 14, 2090–2097, doi:10.3762/bjoc.14.183

• system. Moreover, a series of biologically relevant fluorine-aryl ethers were easily obtained under mild reaction conditions after the removal of the directing group. Keywords: alkoxylation; C–H activation; cobalt catalysis; 1-naphthylamines; secondary alcohols; Introduction Aryl ethers are common

• methods always possess some limitations such as preactivated starting materials, poor regioselectivities, and tedious steps [5]. Therefore, it is desirable to develop an effective strategy to achieve this transformation [6][7]. Over the past few decades, transition-metal-catalyzed C–H activation to form C

• calculations (DFT) [30][31], the C–H activation most possibly proceeded via a single-electron transfer (SET) path compared to a concerted metalation-deprotonation (CMD) path. Followed by an intermolecular SET process, the cation-radical intermediate A was generated, which coordinates with a CoIII species to

Cobalt-catalyzed nucleophilic addition of the allylic C(sp³)–H bond of simple alkenes to ketones

• Tsuyoshi Mita,
• Masashi Uchiyama,
• Kenichi Michigami and
• Yoshihiro Sato

Beilstein J. Org. Chem. 2018, 14, 2012–2017, doi:10.3762/bjoc.14.176

• , affording branched homoallylic alcohols in high yields with perfect branch selectivities. The intermediate of the reaction would be a nucleophilic allylcobalt(I) species generated via cleavage of the low reactive allylic C(sp3)–H bond of simple terminal alkenes. Keywords: alkenes; C–H activation; C(sp3)–H

Direct electrochemical generation of organic carbonates by dehydrogenative coupling

• Tile Gieshoff,
• Vinh Trieu,
• Jan Heijl and
• Siegfried R. Waldvogel

Beilstein J. Org. Chem. 2018, 14, 1578–1582, doi:10.3762/bjoc.14.135

• reactive chemicals. We present the first direct electrochemical generation of mesityl methyl carbonate by C–H activation. Although this reaction pathway is still challenging concerning scope and efficiency, it outlines a new strategy for carbonate generation. Keywords: anode; boron-doped diamond

• diamond (BDD) as electrode material has the capability to convert simple aromatic systems by direct C–H activation [21][22][23][24][25][26][27]. In contrast, other typical anode materials such as graphite, glassy carbon, or platinum tend to lead to electrode fouling when applying high positive potentials

• organic acetonitrile-based electrolyte system. Acetonitrile tolerates highly positive potential regimes, which are necessary for C–H activation of non-functionalized arenes. Since simple metal-based carbonate salts are not sufficiently soluble in organic media, the choice of carbonate source is crucial

Thiocarbonyl-enabled ferrocene C–H nitrogenation by cobalt(III) catalysis: thermal and mechanochemical

• Santhivardhana Reddy Yetra,
• Zhigao Shen,
• Hui Wang and
• Lutz Ackermann

Beilstein J. Org. Chem. 2018, 14, 1546–1553, doi:10.3762/bjoc.14.131

• by weakly-coordinating thiocarbonyl-assisted cobalt catalysis. Thus, carboxylates enabled ferrocene C–H nitrogenations with dioxazolones, featuring ample substrate scope and robust functional group tolerance. Mechanistic studies provided strong support for a facile organometallic C–H activation

• manifold. Keywords: amidation; C–H activation; cobalt; ferrocene; mechanochemistry; Introduction C–H activation has surfaced as a transformative tool in molecular sciences [1][2][3][4][5][6][7][8][9]. While major advances have been accomplished with precious 4d transition metals, recent focus has shifted

• ][24][25][26][27][28][29][30][31][32][33][34][35][36][37][38][39][40][41], prominently featuring transformative C–H nitrogenations [42][43] in an atom- and step-economical fashion [44][45][46][47][48][49][50][51][52][53][54][55][56][57][58][59]. Within our program on cobalt-catalyzed C–H activation [60

Cobalt-catalyzed C–H cyanations: Insights into the reaction mechanism and the role of London dispersion

• Eric Detmar,
• Valentin Müller,
• Daniel Zell,
• Lutz Ackermann and
• Martin Breugst

Beilstein J. Org. Chem. 2018, 14, 1537–1545, doi:10.3762/bjoc.14.130

• intermediates and transition states. Keywords: catalysis; C–H activation; density functional theory; London dispersion; reaction mechanisms; Introduction For a long time, large and bulky substituents have intuitively been considered to act through unfavorable steric interactions, although London dispersion

• , ligand coordination, insertion) shown in Scheme 2 which served as the starting point of this investigation [30]. We now report on our computational findings supported by novel kinetic investigations to establish the reaction mechanism of this synthetically useful C–H activation and to elucidate the role

Hypervalent organoiodine compounds: from reagents to valuable building blocks in synthesis

• Gwendal Grelier,
• Benjamin Darses and
• Philippe Dauban

Beilstein J. Org. Chem. 2018, 14, 1508–1528, doi:10.3762/bjoc.14.128

• -dimethylpyrazole. The reaction has been extended to 1,2,3-triazoles, benzotriazole, and pyrazole. In the latter case, the use of (styryl)(aryl)-λ3-iodanes has also proved to be possible, with the styryl moiety being selectively transferred in the first step. The following step of C–H activation then gives access

Rhodium-catalyzed C–H functionalization of heteroarenes using indoleBX hypervalent iodine reagents

• Erwann Grenet,
• Ashis Das,
• Paola Caramenti and
• Jérôme Waser

Beilstein J. Org. Chem. 2018, 14, 1208–1214, doi:10.3762/bjoc.14.102

• regioselectivity for the C-6 position of bipyridinones and the C-8 position of quinoline N-oxides and tolerated a broad range of functionalities, such as halogens, ethers, or trifluoromethyl groups. Keywords: C–H activation; hypervalent iodine; indoleBX; indoles; pyridinones; rhodium catalysis; Introduction

• compounds with pyridinone, quinolone and indole cores. C–H functionalization of pyridinones and quinoline N-oxides. Scope and limitations of the Rh-catalyzed C–H activation of [1,2'-bipyridin]-2-one. Scope of the Rh-catalyzed peri C–H activation of quinoline N-oxides. Product modifications. Optimization of

• National Science Foundation (No. 200021_159920), the COST action CA15106 (C-H Activation in Organic Synthesis, CHAOS) and EPFL.

Selective carboxylation of reactive benzylic C–H bonds by a hypervalent iodine(III)/inorganic bromide oxidation system

• Toshifumi Dohi,
• Shohei Ueda,
• Kosuke Iwasaki,
• Yusuke Tsunoda,
• Koji Morimoto and
• Yasuyuki Kita

Beilstein J. Org. Chem. 2018, 14, 1087–1094, doi:10.3762/bjoc.14.94

• ; C–H activation; iodine; oxygenation; radicals; Introduction The oxidative activation of a C(sp3)–H bond in organic molecules to directly install various functional groups and new carbon–carbon networks is a topic of interest for researchers engaged in modern synthetic chemistry [1][2][3][4][5][6][7

• aqueous benzylic oxidations using polymeric iodosobenzene in the presence of inorganic bromide and montmorillonite-K10 [51]. In addition, a radical C–H activation strategy, using nonaqueous hypervalent iodine(III)/inorganic bromide systems that can work in organic solvents, was developed for the novel

• results of our extensive study and optimization of our radical C–H activation strategy for the intermolecular oxidative coupling between the benzylic secondary C–H bond and the O–H group of carboxylic acids (Scheme 1). Results and Discussion Benzylic C–H carboxylation can provide a convenient route to