Synthesis of disulfides and 3-sulfenylchromones from sodium sulfinates catalyzed by TBAI

• Zhenlei Zhang,
• Ying Wang,
• Xingxing Pan,
• Manqi Zhang,
• Wei Zhao,
• Meng Li and
• Hao Zhang

Beilstein J. Org. Chem. 2025, 21, 253–261, doi:10.3762/bjoc.21.17

• tetrabutylammonium iodide (TBAI)/H2SO4 reduction system using sodium sulfinate as key component, thus eliminating the need for thiols and redox reagents commonly used in traditional methods. Various disulfides and 3-sulfenylchromones were obtained in moderate to excellent yields through this methodology. Mechanistic

• studies indicate that thiosulfonates play an important role in the reaction process. Keywords: disulfides; sodium sulfinates; 3-sulfenylchromones; TBAI; thiosulfonates; Introduction Organosulfur compounds containing S–S bonds, often referred to as disulfides, are among the most valuable functional

• this study, we report the synthesis of corresponding disulfides under the catalysis of TBAI (tetrabutylammonium iodide) using sodium alkyl or aromatic sulfinates as sulfur sources. Sodium sulfinates are more stable than sulfonyl hydrazides, sulfonyl chlorides, and thiols, and there is no need to add

Advances in the use of metal-free tetrapyrrolic macrocycles as catalysts

• Mandeep K. Chahal

Beilstein J. Org. Chem. 2024, 20, 3085–3112, doi:10.3762/bjoc.20.257

• , with TBAI as a co-catalyst, up to 74% yields (Table 1). The inactivity of porphyrin 18 was attributed to the inaccessibility of the inner core imine due to its planar structure. The mechanism of the epoxide ring-opening reaction was elucidated by DFT calculations, which suggested that the macrocycle

Advances in radical peroxidation with hydroperoxides

• Oleg V. Bityukov,
• Pavel Yu. Serdyuchenko,
• Andrey S. Kirillov,
• Gennady I. Nikishin,
• Vera A. Vil’ and
• Alexander O. Terent’ev

Beilstein J. Org. Chem. 2024, 20, 2959–3006, doi:10.3762/bjoc.20.249

• photocatalytic system under visible light irradiation (443 nm) [56]. Peroxidation of β-ketoesters, cyanoacetic esters, and malonic esters 37 was performed using the TBAI/TBHP system (Scheme 15) [57]. The highest product yields in the TBAI-catalyzed peroxidation were achieved with malonic acid esters, in contrast

• to the metal-catalyzed methods [45][46][47]. Two possible reaction pathways were proposed (Scheme 15). Pathway I is based on the generation of tert-butoxy A and tert-butylperoxy B radicals in the TBAI/TBHP system, followed by the formation of the C-centered radical C. The recombination of

• intermediate C with tert-butylperoxy radical B leads to the target product 38. Pathway II involves the oxidation of TBAI with TBHP to form hypervalent iodine compounds D and E. The reaction of species E with substrate 37 leads to the formation of intermediate F, which interacts with TBHP to yield product 38

Multicomponent syntheses of pyrazoles via (3 + 2)-cyclocondensation and (3 + 2)-cycloaddition key steps

• Ignaz Betcke,
• Alissa C. Götzinger,
• Maryna M. Kornet and
• Thomas J. J. Müller

Beilstein J. Org. Chem. 2024, 20, 2024–2077, doi:10.3762/bjoc.20.178

Diastereoselective synthesis of highly substituted cyclohexanones and tetrahydrochromene-4-ones via conjugate addition of curcumins to arylidenemalonates

• Deepa Nair,
• Abhishek Tiwari,
• Banamali Laha and
• Irishi N. N. Namboothiri

Beilstein J. Org. Chem. 2024, 20, 2016–2023, doi:10.3762/bjoc.20.177

• tetramethylguanidine (TMG) were screened in toluene as the solvent of choice (Table 1, entries 8–10), but only TMG provided the desired product 3a though in lower yield (63%, Table 1, entry 10). Interestingly, TMG furnished 55% yield of 3a in acetonitrile as solvent (Table 1, entry 11). Changing the PTC to TBAI did

Tetrabutylammonium iodide-catalyzed oxidative α-azidation of β-ketocarbonyl compounds using sodium azide

• Christopher Mairhofer,
• David Naderer and
• Mario Waser

Beilstein J. Org. Chem. 2024, 20, 1510–1517, doi:10.3762/bjoc.20.135

• peroxide catalyzed by tetrabutylammonium iodide (TBAI). By utilizing these readily available bulk chemicals a variety of cyclic β-ketocarbonyl derivatives can be efficiently α-azidated under operationally simple conditions. Control experiments support a mechanistic scenario involving in situ formation of

• ammonium iodides [40]. Interestingly, designer catalyst C1 was found being catalytically superior compared to Bu4NI (TBAI) when using H2O2 as the oxidant. Furthermore, it turned out that addition of PBN (phenyl N-tert-butylnitrone) has a beneficial effect on the reaction and that carefully buffered

• α-S(e)CN-functionalization of different pronucleophiles [39] as well as the benzylic azidation of alkylphenol derivatives with NaN3 using TBAI as a catalyst [41]. Considering the fact that TBAI clearly represents one of the most easily available quaternary ammonium iodides and keeping in mind our

SOMOphilic alkyne vs radical-polar crossover approaches: The full story of the azido-alkynylation of alkenes

• Julien Borrel and
• Jerome Waser

Beilstein J. Org. Chem. 2024, 20, 701–713, doi:10.3762/bjoc.20.64

• , entry 10). The addition of DABCO [18] or TBAI [50], two additives known to activate azidobenziodoxolone (ABX), afforded complex mixtures with no trace of 4a (Table 1, entry 11). Acids or fluorinated alcohols were tested to activate the different hypervalent iodine reagents. While AcOH, TFA and TFE had

Development of a chemical scaffold for inhibiting nonribosomal peptide synthetases in live bacterial cells

• Fumihiro Ishikawa,
• Sho Konno,
• Hideaki Kakeya and
• Genzoh Tanabe

Beilstein J. Org. Chem. 2024, 20, 445–451, doi:10.3762/bjoc.20.39

• , TBAI, R–X (a: MeI, b: BnBr, c: BrCH2CCH3, d: BrCH2CN, e: Br(CH2)4N3), DMF, rt, 45% (10a), 59% (10b), 45% (10c), 21% (10d), and 45% (10e); (b) TBSCl, imidazole, DMAP, DMF, rt, 83% (11a), 78% (11b), 57% (11c), 62% (11d), and 65% (11e); (c) 25% TFA in THF aq, 0 °C, 77% (12a), 77% (12b), 50% (12c), 96

Pyridine C(sp²)–H bond functionalization under transition-metal and rare earth metal catalysis

• Haritha Sindhe,
• Malladi Mounika Reddy,
• Karthikeyan Rajkumar,
• Akshay Kamble,
• Amardeep Singh,
• Anand Kumar and
• Satyasheel Sharma

Beilstein J. Org. Chem. 2023, 19, 820–863, doi:10.3762/bjoc.19.62

• N-oxide 119b. In 2016, Wei and co-workers [93] reported the arylation of pyridine N-oxides 9 employing potassium (hetero)aryltrifluoroborates 126 as coupling partner using palladium acetate and TBAI (Scheme 24). Electron-withdrawing and donating groups on the pyridine N-oxide 9 resulted in the

Synthesis and reactivity of azole-based iodazinium salts

• Thomas J. Kuczmera,
• Annalena Dietz,
• Andreas Boelke and
• Boris J. Nachtsheim

Beilstein J. Org. Chem. 2023, 19, 317–324, doi:10.3762/bjoc.19.27

• ; c) I: PhNH2, Cu(OAc)2·H2O, Na2CO3, iPrOH, 40 °C, 17 h, II: CuI, Cs2CO3, DMF, 120 °C, 40 h; d) TsNH2, (CH2OH)2, iPrOH, Na2CO3, 100 °C, 24 h, e) KX, H2O, EtOH, reflux; f) CuI, DMEDA, 1,4-dioxane, TBAI, rt, 24 h; g) MeOTf, DMF, 40 °C, 24 h. Post-functionalization of mono- and dicationic iodonium salts

Menadione: a platform and a target to valuable compounds synthesis

• Acácio S. de Souza,
• Ruan Carlos B. Ribeiro,
• Dora C. S. Costa,
• Fernanda P. Pauli,
• David R. Pinho,
• Matheus G. de Moraes,
• Fernando de C. da Silva,
• Luana da S. M. Forezi and
• Vitor F. Ferreira

Beilstein J. Org. Chem. 2022, 18, 381–419, doi:10.3762/bjoc.18.43

Synthesis of highly substituted fluorenones via metal-free TBHP-promoted oxidative cyclization of 2-(aminomethyl)biphenyls. Application to the total synthesis of nobilone

• Ilya A. P. Jourjine,
• Lukas Zeisel,
• Jürgen Krauß and
• Franz Bracher

Beilstein J. Org. Chem. 2021, 17, 2668–2679, doi:10.3762/bjoc.17.181

• nitrate (CAN) [41], 2,2,6,6-tetramethylpiperidinyloxyl (TEMPO)/CuCl [51], K2S2O8 [36], dimethyl sulfoxide (DMSO)/O2 [52], PhI(OAc)2/benzoyl peroxide (BPO) [47], Dess-Martin periodinane, N-bromosuccinimide (NBS), N-hydroxyphthalimide (NHPI)/Co(OAc)2/O2 [53], H2O2/tetrabutylammonium iodide (TBAI) [43], CBr4

• adverse effect on the yield of fluorenone (3). Addition of TBAI (Table 2, entry 10) in particular looked promising, as TBAI/TBHP-mediated radical cyclizations and cross-dehydrogenative coupling (CDC) reactions are not only well established [57], but addition of TBAI has been shown to increase the yield of

Metal-free nucleophilic trifluoromethylselenolation via an iodide-mediated umpolung reactivity of trifluoromethylselenotoluenesulfonate

• Kevin Grollier,
• Alexis Taponard,
• Arnaud De Zordo-Banliat,
• Emmanuel Magnier and
• Thierry Billard

Beilstein J. Org. Chem. 2020, 16, 3032–3037, doi:10.3762/bjoc.16.252

• species could also possess the CF3Seδ−–Iδ+ inverted polarity. Thus, based on the previously developed conditions, reagent 1a was reacted with benzyl bromide (2a) in the presence of tetrabutylammonium iodide (TBAI) in acetone at 40 °C (Table 1, entry 1). The observed result was moderate (Table 1, entry 1

• 1a and TBAI, leading to an excess of the CF3Se− species, no significant improvement was observed (Table 1, entry 8). On contrary, the use of 2 equivalents of the electrophile 2a, to ameliorate the CF3Se− anion trapping, had a significant effect and gave a very good yield of the product (Table 1

• of iodide (from TBAI) reacts with the reagent 1a to produce the transient species CF3SeI with an inverted polarity on the selenium atom. This compound then undergoes the attack of the second equivalent of iodide to generate the CF3Se− anion with releasing of I2. Finally, the nucleophilic CF3Se− can

Oxime radicals: generation, properties and application in organic synthesis

• Igor B. Krylov,
• Stanislav A. Paveliev,
• Alexander S. Budnikov and
• Alexander O. Terent’ev

Beilstein J. Org. Chem. 2020, 16, 1234–1276, doi:10.3762/bjoc.16.107

• successfully undergo this cyclization (products 115f–h). C-centered radicals generated in a radical 5-exo-trig cyclization of β,γ-unsaturated oximes 116 upon oxidation by the TBAI/TBHP system were trapped by an isonitrile group of 2-arylphenyl isonitriles 117 to synthesize substituted phenanthridines 118

Synthesis of novel multifunctional carbazole-based molecules and their thermal, electrochemical and optical properties

• Nuray Altinolcek,
• Ahmet Battal,
• Mustafa Tavasli,
• William J. Peveler,
• Holly A. Yu and
• Peter J. Skabara

Beilstein J. Org. Chem. 2020, 16, 1066–1074, doi:10.3762/bjoc.16.93

• % aqueous NaOH in the presence of tetrabutylammonium iodide (TBAI) [33][34][35]. Upon chromatography 3-bromo-9-hexylcarbazole (4) was obtained as a liquid in good yield. 3-Bromo-9-hexylcarbazole (4) was then converted into the pinacol boronic ester by treating with bis(pinacolato)diboron in the presence of

• compounds 7a and 7b in dichloromethane. Normalised UV–vis spectra of compounds 7a and 7b in different solvents. PL spectra of compounds 7a and 7b in different solvents (A–H). Synthesis of compounds 7a and 7b from carbazole 1. i) NBS, DMF, 0 °C to rt, 24 h. ii) n-hexyl bromide, TBAI, NaOH (50%), 77 °C, 8 h

Recent advances in transition-metal-catalyzed incorporation of fluorine-containing groups

• Xiaowei Li,
• Xiaolin Shi,
• Xiangqian Li and
• Dayong Shi

Beilstein J. Org. Chem. 2019, 15, 2213–2270, doi:10.3762/bjoc.15.218

• obtained products with stable E-configuration through a SET process. In 2017, Loh and co-workers [141] introduced a Cu(I/II)-catalyzed Cvinyl–H trifluoromethylation of a variety of styrene derivatives. This process was achieved by using 1-methylimidazole (NMI) as ligand and tetrabutylammonium iodide (TBAI

1,2,3-Triazolium macrocycles in supramolecular chemistry

• Mastaneh Safarnejad Shad,
• Pulikkal Veettil Santhini and
• Wim Dehaen

Beilstein J. Org. Chem. 2019, 15, 2142–2155, doi:10.3762/bjoc.15.211

• component catalytic system composed of 16c before methylation and TBAI as reference catalysts. Optimization studies of the reaction conditions showed that the addition of CHCl3 and lowering of the reaction temperature (to 10 °C) considerably increased the enantioselectivity (s value of 4.1). An evaluation

N-(1-Phenylethyl)aziridine-2-carboxylate esters in the synthesis of biologically relevant compounds

• Iwona E. Głowacka,
• Aleksandra Trocha,
• Andrzej E. Wróblewski and
• Dorota G. Piotrowska

Beilstein J. Org. Chem. 2019, 15, 1722–1757, doi:10.3762/bjoc.15.168

Design of a double-decker coordination cage revisited to make new cages and exemplify ligand isomerism

• Sagarika Samantray,
• Sreenivasulu Bandi and
• Dillip K. Chand

Beilstein J. Org. Chem. 2019, 15, 1129–1140, doi:10.3762/bjoc.15.109

• change observable except a slight broadening of the signals for Hb and Hc. Further addition of TBAF led to the formation of [(F)2@Pd3(L1)4](NO3)4 (5a) along with minor impurities. However, the addition of TBAI to 4a showed no changes and hence iodide encapsulation did not happen. The 1H NMR spectra for

• argument might answer this question. The complexation reaction shown in steps (ii) of Scheme 3 suggest that the presence of BF4−, ClO4− or OTf− could not support the formation of the double-decker cage even though the required amount of palladium(II) was available. The addition of TBAI to any of these

Synthesis of α-D-GalpN₃-(1-3)-D-GalpN₃: α- and 3-O-selectivity using 3,4-diol acceptors

• Emil Glibstrup and
• Christian Marcus Pedersen

Beilstein J. Org. Chem. 2018, 14, 2805–2811, doi:10.3762/bjoc.14.258

• product 22 and a side-product 23, in which the adjacent TBDPS has been cleaved off and the 6-OH subsequently benzylated (Scheme 5). This side reaction could, however, easily be avoided by using a procedure in which BnBr and TBAI was added and mixed before the addition of NaH. This modification gave a 91

Calixazulenes: azulene-based calixarene analogues – an overview and recent supramolecular complexation studies

• Paris E. Georghiou,
• Shofiur Rahman,
• Abdullah Alodhayb,
• Hidetaka Nishimura,
• Jaehyun Lee,
• Atsushi Wakamiya and
• Lawrence T. Scott

Beilstein J. Org. Chem. 2018, 14, 2488–2494, doi:10.3762/bjoc.14.225

• guests and complexes (i.e., for TBACl, TBABr and TBAI) but not with the tetrafluorborate salts, we used relativistic ECPs by Hay and Wadt (LANL) along with the corresponding LANL2DZ basis set augmented with additional d-, p-polarizational functions [27][28][29][30]. For the TBABF4 salts the ωB97xD/6-31G

Hypervalent iodine compounds for anti-Markovnikov-type iodo-oxyimidation of vinylarenes

• Igor B. Krylov,
• Stanislav A. Paveliev,
• Mikhail A. Syroeshkin,
• Alexander A. Korlyukov,
• Pavel V. Dorovatovskii,
• Yan V. Zubavichus,
• Gennady I. Nikishin and
• Alexander O. Terent’ev

Beilstein J. Org. Chem. 2018, 14, 2146–2155, doi:10.3762/bjoc.14.188

• %) was obtained using PhI(OAc)2 (Table 1, entry 2). Other iodine-based oxidants, such as PhI(OCOCF3)2 (Table 1, entry 10, yield 31%), IBX (Table 1, entries 11 and 12, yield 32–54%), DMP (Table 1, entries 13–14, yield 52%), showed less efficacy in this process. Peroxide oxidants, such as TBHP, TBAI/TBHP

• ). Prolongation of the reaction time to 24 h led to a slight decrease in the yield of 3aa (Table 1, entry 3) due to its instability under the reaction conditions. The possibility of using iodide salts (NaI and TBAI) was shown in Entries 8 and 9, however, the yield of 3aa in that cases is lower than in the case of

Iodine(III)-mediated halogenations of acyclic monoterpenoids

• Laure Peilleron,
• Tatyana D. Grayfer,
• Joëlle Dubois,
• Robert H. Dodd and
• Kevin Cariou

Beilstein J. Org. Chem. 2018, 14, 1103–1111, doi:10.3762/bjoc.14.96

• 5a was obtained in 70% yield (Table 1, entry 7). Interestingly, no traces of the diiodo compound were observed even if the hypervalent iodine(III) reagent was slowly added. Transposing the previously optimized bromo(trifluoro)acetoxylation conditions but using TBAI instead of KI did not improve the

• yield and reaction times and excess reagents were required to reach completion (Table 1, entry 8). Using directly 1.5 equivalents of both PIFA and TBAI did not suffice to improve the yield, whether in acetonitrile or in dichloromethane (Table 1, entries 9 and 10). When chlorination was attempted with a

Bromide-assisted chemoselective Heck reaction of 3-bromoindazoles under high-speed ball-milling conditions: synthesis of axitinib

• Jingbo Yu,
• Zikun Hong,
• Xinjie Yang,
• Yu Jiang,
• Zhijiang Jiang and
• Weike Su

Beilstein J. Org. Chem. 2018, 14, 786–795, doi:10.3762/bjoc.14.66

• . Currently, the Heck reaction is usually carried out by adding an excess of phase-transfer catalyst such as tetrabutylammonium bromide (TBAB) or tetrabutylammonium iodide (TBAI) to increase the reaction yield under both solvent-heating [19][20][21][22][23] and solvent-free conditions [24][25][26][27

• , TBAI or tetrabutylammonium chloride (TBAC) did not provide a satisfactory result (Table S1, entries 3 and 4). It was interesting to find that using bromide salts (LiBr, NaBr, KBr and TBAB) as additives, not only the conversion rate of 1a was increased, but also the side-product 4a was suppressed

One-pot preparation of 4-aryl-3-bromocoumarins from 4-aryl-2-propynoic acids with diaryliodonium salts, TBAB, and Na₂S₂O₈

• Teppei Sasaki,
• Katsuhiko Moriyama and
• Hideo Togo

Beilstein J. Org. Chem. 2018, 14, 345–353, doi:10.3762/bjoc.14.22

• mixture of 1,2-dichloroethane (DCE) and water at 90 °C was carried out to give 3-bromo-4-phenylcoumarin (3Aa) in 68% yield (Table 2, entry 7). When the iodocyclization of phenyl ester 2Aa with tetrabutylammonium iodide (TBAI, 2.0 equiv)/Na2S2O8 (1.5 equiv) was carried out, the yield of iodocyclization