1-Butyl-3-methylimidazolium tetrafluoroborate as suitable solvent for BF₃: the case of alkyne hydration. Chemistry vs electrochemistry

• Marta David,
• Elisa Galli,
• Richard C. D. Brown,
• Marta Feroci,
• Fabrizio Vetica and
• Martina Bortolami

Beilstein J. Org. Chem. 2023, 19, 1966–1981, doi:10.3762/bjoc.19.147

• alkynes was studied in the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate (BMIm-BF4) adding boron trifluoride diethyl etherate (BF3·Et2O) as catalyst. Different ionic liquids were used, varying the cation or the anion, in order to identify the best one, in terms of both efficiency and reduced

• the aldol condensation products. Importantly, the ability to recycle the ionic liquid in subsequent reactions was successfully demonstrated. Keywords: alkyne hydration; boron trifluoride; electrochemical synthesis; ionic liquids; Introduction Alkynes are fundamental starting materials towards more

• -heterocyclic carbenes (NHCs), extensively studied as organocatalysts as well as ligands for transition-metal-promoted synthetic methodologies [97][98][99]. Under anodic oxidation, the electrogeneration of boron trifluoride (BF3) from tetrafluoroborate ILs occurs [100][101]. Moreover, we have recently

Tying a knot between crown ethers and porphyrins

• Maksym Matviyishyn and
• Bartosz Szyszko

Beilstein J. Org. Chem. 2023, 19, 1630–1650, doi:10.3762/bjoc.19.120

• synthesis of these compounds involved the condensation of a meso-disubstituted dipyrromethane with diamines incorporating the crown ether/azacrown segment in the presence of boron trifluoride diethyl etherate as a catalyst [66]. The treatment of compound 16 with potassium hydride yielded 16-K2, a suitable

Synthesis of ether lipids: natural compounds and analogues

• Marco Antônio G. B. Gomes,
• Alicia Bauduin,
• Chloé Le Roux,
• Romain Fouinneteau,
• Wilfried Berthe,
• Mathieu Berchel,
• Hélène Couthon and
• Paul-Alain Jaffrès

Beilstein J. Org. Chem. 2023, 19, 1299–1369, doi:10.3762/bjoc.19.96

Enolates ambushed – asymmetric tandem conjugate addition and subsequent enolate trapping with conventional and less traditional electrophiles

• Péter Kisszékelyi and
• Radovan Šebesta

Beilstein J. Org. Chem. 2023, 19, 593–634, doi:10.3762/bjoc.19.44

• developed a Lewis acid-promoted conjugate addition to unreactive Michael acceptors such as amides or vinyl heterocycles [60]. Trimethylsilyl triflate or boron trifluoride-activated unsaturated amides underwent highly efficient and enantioselective addition of Grignard reagents. When this methodology was

Discrimination of β-cyclodextrin/hazelnut (Corylus avellana L.) oil/flavonoid glycoside and flavonolignan ternary complexes by Fourier-transform infrared spectroscopy coupled with principal component analysis

• Nicoleta G. Hădărugă,
• Gabriela Popescu,
• Dina Gligor (Pane),
• Cristina L. Mitroi,
• Sorin M. Stanciu and
• Daniel Ioan Hădărugă

Beilstein J. Org. Chem. 2023, 19, 380–398, doi:10.3762/bjoc.19.30

• ) of the FA glycerides to the corresponding FA methyl esters (FAMEs) [11][13]. The derivatization involved methanol–boron trifluoride (20% BF3), hexane (GC grade) and anhydrous sodium sulfate, all purchased from Merck & Co., Inc., Rahway, NJ, USA. Sodium chloride (reagent grade) used for the separation

Investigation of cationic ring-opening polymerization of 2-oxazolines in the “green” solvent dihydrolevoglucosenone

• Solomiia Borova and
• Robert Luxenhofer

Beilstein J. Org. Chem. 2023, 19, 217–230, doi:10.3762/bjoc.19.21

• for most POx, accordingly, it was used successfully only for the polymerization of EtOx [34]. Correia et al. used supercritical carbon dioxide for the synthesis of 2-oxazoline-based oligomers with antimicrobial properties and applied boron trifluoride etherate as the initiator [35]. However, carbamic

• Dihydrolevoglucosenone (DLG) is prepared by hydrogenation of levoglucosenone in the presence of palladium as a catalyst. Recently, Debsharma et al. reported the CROP of levoglucosenyl alkyl ether in CH2Cl2 at 0 °C and at room temperature using triflic acid or boron trifluoride etherate as initiators [46][47][48]. The 1H

Synthetic strategies for the preparation of γ-phostams: 1,2-azaphospholidine 2-oxides and 1,2-azaphospholine 2-oxides

• Jiaxi Xu

Beilstein J. Org. Chem. 2022, 18, 889–915, doi:10.3762/bjoc.18.90

• reaction of 2-imino-2H-chromene-3-carboxamide (228) and diethyl phosphite at 80–90 °C under the catalysis of boron trifluoride, afforded 4-amino-1-ethoxy-9b-hydrochromeno[4,3-c][1,2]azaphosphol-3(2H)-one 1-oxide (229) in 40% yield through the Michael addition and subsequent tautomerization and

Menadione: a platform and a target to valuable compounds synthesis

• Acácio S. de Souza,
• Ruan Carlos B. Ribeiro,
• Dora C. S. Costa,
• Fernanda P. Pauli,
• David R. Pinho,
• Matheus G. de Moraes,
• Fernando de C. da Silva,
• Luana da S. M. Forezi and
• Vitor F. Ferreira

Beilstein J. Org. Chem. 2022, 18, 381–419, doi:10.3762/bjoc.18.43

• ) and excess of triene 53 was carried out using boron trifluoride diethyl etherate or zirconium(IV) tetrachloride to furnish product 54 in good yield (Scheme 15). The same group also explored the Diels–Alder reaction of menadione (10) with trienes 55, 57, and 59 (Scheme 16) [110]. The scandium(III

Highly stereocontrolled total synthesis of racemic codonopsinol B through isoxazolidine-4,5-diol vinylation

• Lukáš Ďurina,
• Anna Ďurinová,
• František Trejtnar,
• Ľuboš Janotka,
• Lucia Messingerová,
• Jana Doháňošová,
• Ján Moncol and
• Róbert Fischer

Beilstein J. Org. Chem. 2021, 17, 2781–2786, doi:10.3762/bjoc.17.188

• terminal alkenes bearing both an allylic and homoallylic-type hydroxy group, yielding a sole threo isomer, are rare [36]. The cyclization of 5 through an epoxide ring-opening reaction with boron trifluoride etherate in dichloromethane at 0 °C yielded pyrrolidine derivative 12 in 69% isolated yield [37

Synthetic strategies toward 1,3-oxathiolane nucleoside analogues

• Umesh P. Aher,
• Dhananjai Srivastava,
• Girij P. Singh and
• Jayashree B. S

Beilstein J. Org. Chem. 2021, 17, 2680–2715, doi:10.3762/bjoc.17.182

• by Humber et al. [45]. They started with a coupling reaction of (+)-thiolactic acid 3p and 2-benzoyloxyacetaldehyde (3a) using boron trifluoride etherate. A diastereomeric mixture of oxathiolane acids 29 and 30 was prepared in a 1:2 ratio in good yield (Scheme 7). Further separation of the

Synthesis of new bile acid-fused tetrazoles using the Schmidt reaction

• Dušan Đ. Škorić,
• Olivera R. Klisurić,
• Dimitar S. Jakimov,
• Marija N. Sakač and
• János J. Csanádi

Beilstein J. Org. Chem. 2021, 17, 2611–2620, doi:10.3762/bjoc.17.174

• noticeably, while the yield was preserved. Ketone 3 and enone 4 were used for the optimization of reaction conditions. Firstly, the ketone 3 was reacted with hydrazoic acid in the presence of boron trifluoride etherate as a Lewis acid (Table 1, entry 1). The desired tetrazole 13 was obtained after

• for the preparation of tetrazoles with hydrazoic acid Caution: Hydrazoic acid should be handled with care in an efficient fume hood since it is toxic and explosive. In a two-neck round-bottom flask equipped with an addition funnel and argon inlet, a benzene solution of hydrazoic acid (18 mL) and boron

• trifluoride etherate (1.15 mL) were placed. The mixture was cooled with an ice water bath, and a benzene solution of the carbonyl compound (1.50 mmol in 15 mL of benzene) was added dropwise over 40 minutes with stirring and cooling. After the addition was completed, the reaction mixture was left at room

Silica gel and microwave-promoted synthesis of dihydropyrrolizines and tetrahydroindolizines from enaminones

• Robin Klintworth,
• Garreth L. Morgans,
• Stefania M. Scalzullo,
• Charles B. de Koning,
• Willem A. L. van Otterlo and
• Joseph P. Michael

Beilstein J. Org. Chem. 2021, 17, 2543–2552, doi:10.3762/bjoc.17.170

• , methanesulfonic acid, boron trifluoride etherate) resulted in decomposition if the reactions were left at room temperature overnight, or within ten minutes if the temperature was raised, even to 50 °C (Table 1, entries 6–13). The enaminone appeared to be protonated at room temperature, presumably on the oxygen

• was heated, in which case decomposition took place (Table 1, entry 15). Solutions of 15a in dichloromethane also decomposed rapidly when treated with aluminum trichloride or boron trifluoride at 50 °C, although no reaction was apparent at room temperature even after 18 hours (Table 1, entries 16–19

Facile and innovative catalytic protocol for intramolecular Friedel–Crafts cyclization of Morita–Baylis–Hillman adducts: Synergistic combination of chiral (salen)chromium(III)/BF₃·OEt₂ catalysis

• Karthikeyan Soundararajan,
• Helen Ratna Monica Jeyarajan,
• Raju Subimol Kamarajapurathu and
• Karthik Krishna Kumar Ayyanoth

Beilstein J. Org. Chem. 2021, 17, 2186–2193, doi:10.3762/bjoc.17.140

• -substituted-1H-indenes from unique substrates of Morita–Baylis–Hillman adducts via an easy operating practical procedure. Keywords: boron trifluoride etherate; chiral (salen)chromium(III); intramolecular Friedel–Crafts cyclization; Morita–Baylis–Hillman adducts; substituted-1H-indenes; Introduction

• in MBH adduct 5a (Table 1, entries 14–17). Interestingly among all co-catalysts examined, boron trifluoride etherate was the found to be the suitable co-catalyst in accelerating the proposed reaction. Furthermore on screening the optimized catalytic combination in presence of alternative solvents

On the application of 3d metals for C–H activation toward bioactive compounds: The key step for the synthesis of silver bullets

• Renato L. Carvalho,
• Amanda S. de Miranda,
• Mateus P. Nunes,
• Roberto S. Gomes,
• Guilherme A. M. Jardim and
• Eufrânio N. da Silva Júnior

Beilstein J. Org. Chem. 2021, 17, 1849–1938, doi:10.3762/bjoc.17.126

• /hemiacetal avoiding undesirable elimination to the enamine, or attack at other electrophilic sites in complex substrates. The presence of a fluorine source like diethylaminosulfur trifluoride (DAST) or the Lewis acid boron trifluoride diethyl etherate (BF3·OEt2) result in the formation of reactive iminium or

Synthetic accesses to biguanide compounds

• Oleksandr Grytsai,
• Cyril Ronco and
• Rachid Benhida

Beilstein J. Org. Chem. 2021, 17, 1001–1040, doi:10.3762/bjoc.17.82

• 90% yield. A Lewis acid-promoted cyclization (boron trifluoride etherate at 60 °C) avoided the use of high temperatures, while providing the products in comfortable yields. Dicyanamide has also been shown to react with hydroxylamine hydrochloride to form [1,2,4]oxadiazole-3,5-diamine (Scheme 29A) [49

All-carbon [3 + 2] cycloaddition in natural product synthesis

• Zhuo Wang and
• Junyang Liu

Beilstein J. Org. Chem. 2020, 16, 3015–3031, doi:10.3762/bjoc.16.251

• -mediated conjugated addition of methyllithium to enone 59 in the presence of boron trifluoride ether [34][35] produced desired ketone 60 in 75% yield. The resultant ketone 60 was converted to waihoensene (16) in two steps. Palladium-catalyzed carboxylative trimethylenemethane cycloaddition In 1986, Trost

Synthetic approaches to bowl-shaped π-conjugated sumanene and its congeners

• Shakeel Alvi and
• Rashid Ali

Beilstein J. Org. Chem. 2020, 16, 2212–2259, doi:10.3762/bjoc.16.186

• ′-tetramethylethylenediamine (TMEDA) as shown in the Scheme 1. Having the compound 4 in hand, it was subjected to the cyclization in the presence of boron trifluoride to provide the tricyclohexyl-fused benzene derivative which on further dehydrogenation with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) afforded 1,5,9

The biomimetic synthesis of balsaminone A and ellagic acid via oxidative dimerization

• Sharna-kay Daley and
• Nadale Downer-Riley

Beilstein J. Org. Chem. 2020, 16, 2026–2031, doi:10.3762/bjoc.16.169

• FeCl3·SiO2. Treatment of the polyphenol with PIDA (1.5 equiv) in boron trifluoride etherate (1.5 mL) at room temperature proved to be the most successful dimerization protocol, as the dimeric precursor 19 was formed in 80% yield after 16 hours. The biaryl 19 was converted quantitatively to the natural

Controlling the stereochemistry in 2-oxo-aldehyde-derived Ugi adducts through the cinchona alkaloid-promoted electrophilic fluorination

• Yuqing Wang,
• Gaigai Wang,
• Anatoly A. Peshkov,
• Ruwei Yao,
• Muhammad Hasan,
• Manzoor Zaman,
• Chao Liu,
• Stepan Kashtanov,
• Olga P. Pereshivko and
• Vsevolod A. Peshkov

Beilstein J. Org. Chem. 2020, 16, 1963–1973, doi:10.3762/bjoc.16.163

• -triggered complexation with boron trifluoride diethyl etherate. The resulting O,O-chelated boron complexes 11 turned out to be strong solid-state emitters featuring clear aggregation-induced emission (AIE) characteristics [61]. Encouraged by these results, we decided to attempt the reaction of 2-oxo

Selective preparation of tetrasubstituted fluoroalkenes by fluorine-directed oxetane ring-opening reactions

• Clément Q. Fontenelle,
• Thibault Thierry,
• Romain Laporte,
• Emmanuel Pfund and
• Thierry Lequeux

Beilstein J. Org. Chem. 2020, 16, 1936–1946, doi:10.3762/bjoc.16.160

• can be stopped at the alcohol stage when performed in the presence of BF3·Et2O instead of CSA to afford alkene Z-13 as the major product. The use of boron trifluoride etherate as an activator combined with TBAB afforded exclusively alkene Z-13 as evidenced by TLC, but after work-up, 22% of the

• resulted in slow solvolysis of alcohol 1d with acetic acid giving mainly the corresponding acetate (not shown). Product 1d was also obtained in a similar E/Z ratio (88:12) when the ring-opening reaction was performed in dichloromethane with tetrabutylammonium bromide (TBAB) as the bromide source and boron

• trifluoride diethyl etherate as an activator (Table 1, entry 5). Nevertheless, the isolated yield of the product decreased to 71%. Next, the reaction performed with HBr/AcOH was extended to alkylidene oxetanes substituted by an alkyl chain, and a pyrimidine base. The presence of the alkyl chain in place of

N-(1-Phenylethyl)aziridine-2-carboxylate esters in the synthesis of biologically relevant compounds

• Iwona E. Głowacka,
• Aleksandra Trocha,
• Andrzej E. Wróblewski and
• Dorota G. Piotrowska

Beilstein J. Org. Chem. 2019, 15, 1722–1757, doi:10.3762/bjoc.15.168

• bulkiness of the tert-butyldimethylsilyloxy group in 205 three different approaches to stereoselective dihydroxylations of the C=C bond were elaborated. Thus, treatment with Oxone® gave the anti-epoxide 206 which was regioselectively opened in a boron

Synthesis, enantioseparation and photophysical properties of planar-chiral pillar[5]arene derivatives bearing fluorophore fragments

• Guojuan Li,
• Chunying Fan,
• Guo Cheng,
• Wanhua Wu and
• Cheng Yang

Beilstein J. Org. Chem. 2019, 15, 1601–1611, doi:10.3762/bjoc.15.164

• -dimethoxybenzene (1.7 g, 1.2 mmol) and 7 (55.8 mg, 0.3 mmol) in 1,2-dichloroethane (150 mL), paraformaldehyde (271.5 mg, 3.0 mmol) was added under nitrogen atmosphere. Then, boron trifluoride diethyl etherate (120 μL) was added to the solution and the mixture was stirred at room temperature for 1 h. Water (100 mL

Robust perfluorophenylboronic acid-catalyzed stereoselective synthesis of 2,3-unsaturated O-, C-, N- and S-linked glycosides

• Madhu Babu Tatina,
• Xia Mengxin,
• Rao Peilin and
• Zaher M. A. Judeh

Beilstein J. Org. Chem. 2019, 15, 1275–1280, doi:10.3762/bjoc.15.125

• results obtained using boron trifluoride diethyl etherate [32]. We then applied the perfluorophenylboronic acid catalyst to promote the reaction between 2,3,4,6-tetra-O-acetyl-D-glucal (4a) and O- and S-nucleophiles (Figure 2). The Ferrier-catalyzed rearrangements of 2-substituted sugars such as 2,3,4,6

Extending mechanochemical porphyrin synthesis to bulkier aromatics: tetramesitylporphyrin

• Qiwen Su and
• Tamara D. Hamilton

Beilstein J. Org. Chem. 2019, 15, 1149–1153, doi:10.3762/bjoc.15.111

• the first-reported conditions of the Lindsey synthesis, mesitaldehyde “failed to give good yields” of TMP [11]. Later studies of modified reaction conditions employing boron trifluoride as the acid catalyst, and small amounts of ethanol as a co-catalyst, were successful in producing TMP with yields

Synthesis of the aglycon of scorzodihydrostilbenes B and D

• Katja Weimann and
• Manfred Braun

Beilstein J. Org. Chem. 2019, 15, 610–616, doi:10.3762/bjoc.15.56

• -D-glucose pentaacetate in the presence of an excess of boron trifluoride etherate [20], a regioselective reaction occurred at the phenolic group in ortho-position to the alkyl side chain to give mono-glycosylated product 12. Chelation of the carbonyl and the neighboring phenolic group by the Lewis

• equipped with a stirring bar and a connection to the combined nitrogen/vacuum line. The flask was charged with dihydrostilbene 9 (330 mg, 1.04 mmol) and β-glucose pentaacetate (814 mg, 2.08 mmol) and closed with a septum. The air in the flask was replaced by nitrogen. Then, dichloromethane (4 mL) and boron

• trifluoride etherate (0.4 mL, 3.12 mmol) were injected by syringe. The mixture was stirred at 25 °C for 2 d. Thereafter, saturated aqueous sodium hydrogen carbonate (10 mL) was added and the mixture was extracted five times with 15 mL portions of dichloromethane. The combined organic layers were washed with