Wafer-level integration of self-aligned high aspect ratio silicon 3D structures using the MACE method with Au, Pd, Pt, Cu, and Ir

• Mathias Franz,
• Romy Junghans,
• Paul Schmitt,
• Adriana Szeghalmi and
• Stefan E. Schulz

Beilstein J. Nanotechnol. 2020, 11, 1439–1449, doi:10.3762/bjnano.11.128

• nanoparticles were used to locally etch the silicon substrate. This work demonstrates a bottom-up self-assembly approach for noble metal nanoparticle formation and the subsequent silicon wet etching. The macroscopic wafer patterning has been done by using a poly(methyl methacrylate) masking layer. Different

Formation of metal/semiconductor Cu–Si composite nanostructures

• Natalya V. Yumozhapova,
• Andrey V. Nomoev,
• Vyacheslav V. Syzrantsev and
• Erzhena C. Khartaeva

Beilstein J. Nanotechnol. 2019, 10, 2497–2504, doi:10.3762/bjnano.10.240

• retaining their properties for several months. The transmission electron microscopy image shows core–shell particles, Janus-like nanoparticles, and individual particles SiOx (Figure 6). The modelling of the nanoparticle formation from the original nanoscale droplets described above suggests that Cu–SiOx

Mannosylated brush copolymers based on poly(ethylene glycol) and poly(ε-caprolactone) as multivalent lectin-binding nanomaterials

• Stefania Ordanini,
• Wanda Celentano,
• Anna Bernardi and
• Francesco Cellesi

Beilstein J. Nanotechnol. 2019, 10, 2192–2206, doi:10.3762/bjnano.10.212

• three days. The crudes were purified by dialysis against water, and the final products (A4-)PEGx-PCLy-Many were lyophilized, achieving moderate to high yields. Nanoparticle formation and size characterization Dynamic light scattering (DLS) was used to determine the hydrodynamic diameter (Dh) of the

Incorporation of doxorubicin in different polymer nanoparticles and their anticancer activity

• Sebastian Pieper,
• Hannah Onafuye,
• Dennis Mulac,
• Jindrich Cinatl Jr.,
• Mark N. Wass,
• Martin Michaelis and
• Klaus Langer

Beilstein J. Nanotechnol. 2019, 10, 2062–2072, doi:10.3762/bjnano.10.201

• nanoparticle formation resulting in smaller particle diameters [38]. Emulsion diffusion resulted in PLA nanoparticles of 246.2 ± 2.9 nm and solvent displacement in PLA nanoparticles of 192.1 ± 2.5 nm. The detailed reason for this is not clear, but in the case of the emulsion diffusion technique the resulting

The influence of porosity on nanoparticle formation in hierarchical aluminophosphates

• Matthew E. Potter,
• Lauren N. Riley,
• Alice E. Oakley,
• Panashe M. Mhembere,
• June Callison and
• Robert Raja

Beilstein J. Nanotechnol. 2019, 10, 1952–1957, doi:10.3762/bjnano.10.191

Synthesis of nickel/gallium nanoalloys using a dual-source approach in 1-alkyl-3-methylimidazole ionic liquids

• Ilka Simon,
• Julius Hornung,
• Juri Barthel,
• Jörg Thomas,
• Maik Finze,
• Roland A. Fischer and
• Christoph Janiak

Beilstein J. Nanotechnol. 2019, 10, 1754–1767, doi:10.3762/bjnano.10.171

• (CN)3] no nanoparticle formation was observed. Catalysis Previously reported NiGa nanoparticles synthesized in [BMIm][BF4] with a size distribution of 14 ± 5 nm were used successfully in the semihydrogenation reaction of the terminal alkyne 1-octyne and the internal alkyne diphenylacetylene, with

• nickel with 5 ± 1 nm and of gallium with 40 ± 5 nm, see Supporting Information File 1, Figure S9 and Figure S10. d) No nanoparticle formation in [EMIm][FB(CN)3] from Ni(COD)2 and GaCp* after 24 h of dispersion and 30 min of microwave-induced decomposition. Top: Hydrogen uptake as a function of the time

Enhanced inhibition of influenza virus infection by peptide–noble-metal nanoparticle conjugates

• Zaid K. Alghrair,
• David G. Fernig and
• Bahram Ebrahimi

Beilstein J. Nanotechnol. 2019, 10, 1038–1047, doi:10.3762/bjnano.10.104

• . Therefore, a nanoparticle formation of FluPep ligand or analogous peptides offers a route to new treatments for influenza and other respiratory pathogens. Experimental Materials Peptides FluPep WLVFFVIFYFFRRRKK, FluPep ligand CVVVTAAAWLVFFVIFYFFRRRKK and the ligand shell matrix peptidol CVVVT-ol were

Gold nanoparticles embedded in a polymer as a 3D-printable dichroic nanocomposite material

• Lars Kool,
• Anton Bunschoten,
• Aldrik H. Velders and
• Vittorio Saggiomo

Beilstein J. Nanotechnol. 2019, 10, 442–447, doi:10.3762/bjnano.10.43

• change during the synthesis hints that the dichroic nanoparticle formation is not just seeded growth, but a more complex mechanism. Therefore, we studied the evolution of the nanoparticle formation over time using UV–vis spectroscopy and TEM (Supporting Information File 1, Figures S3 and S4). The time

The nanoscaled metal-organic framework ICR-2 as a carrier of porphyrins for photodynamic therapy

• Jan Hynek,
• Sebastian Jurík,
• Martina Koncošová,
• Jaroslav Zelenka,
• Ivana Křížová,
• Tomáš Ruml,
• Kaplan Kirakci,
• Ivo Jakubec,
• František Kovanda,
• Kamil Lang and
• Jan Demel

Beilstein J. Nanotechnol. 2018, 9, 2960–2967, doi:10.3762/bjnano.9.275

• preparation of nanoICR-2. The use of pure formamide (FA) or mixtures with DMF of more than 50 vol % FA at 100 °C led to the formation of nanoparticles with approximately 30 nm in diameter. The origin of the nanoparticle formation is probably the suppression of the crystallization along the c-axis leading to a

Enhanced antineoplastic/therapeutic efficacy using 5-fluorouracil-loaded calcium phosphate nanoparticles

• Shanid Mohiyuddin,
• Saba Naqvi and
• Gopinath Packirisamy

Beilstein J. Nanotechnol. 2018, 9, 2499–2515, doi:10.3762/bjnano.9.233

• for hepatoma targeted delivery of docetaxel with lactose as the targeting molecule [7]. Curcumin-loaded organically modified silica nanoparticles (ORMOSIL) were studied to check the potential anticancer property of ORMOSIL nanocarriers [8]. However, in some instances, after nanoparticle formation, the

• (pre-sonicated for homogenization) were measured in separate cuvettes. Fourier-transform infrared analysis FTIR analysis was performed on both the CaP@5-FU NPs and CaP NPs to understand the chemistry of the functional group. The nanoparticle formation was confirmed by FTIR vibrational frequency

• value of calcium phosphate nanoparticles was found to have a direct association with Ca/P molar ratio [30]. The molar ratio of the formed nanoparticles in the current study was 3.88. The synthesized CaP@5-FU NPs were found to have a zeta potential of −25.5 mV (Figure 2B). This confirms the nanoparticle

Localized photodeposition of catalysts using nanophotonic resonances in silicon photocathodes

• Evgenia Kontoleta,
• Sven H. C. Askes,
• Lai-Hung Lai and
• Erik C. Garnett

Beilstein J. Nanotechnol. 2018, 9, 2097–2105, doi:10.3762/bjnano.9.198

• platinum nanoparticles does not allow for a “back” transfer of electrons. Hence, charge separation is promoted, which allows further reduction of hexachloroplatinate to Pt(0) on one of the existing platinum nanoparticles rather than in new locations. As a result, the initial platinum nanoparticle formation

Cryochemical synthesis of ultrasmall, highly crystalline, nanostructured metal oxides and salts

• Elena A. Trusova and
• Nikolai S. Trutnev

Beilstein J. Nanotechnol. 2018, 9, 1755–1763, doi:10.3762/bjnano.9.166

• oxide nanoparticle formation under of sol–gel synthesis in combination with cryotreatment of the sol is presented in Figure 3 using the example of the ceria nanopowder. The process under consideration involves the interaction of hydrolyzed Ce3+ ions with DMOA to form the sol intermediate, A. Then, the

• nanoparticle formation, including the cryotreatment step (liquid N2, −196 °C ) on the as-prepared sol. A is the sol intermediate formed from the interaction of hydrolyzed Ce3+ ions with DMOA. B is the cryogel formed from the interaction of liquid nitrogen with A. XRD pattern (DRON-3M, Russia) and TEM image

Atomic-level characterization and cilostazol affinity of poly(lactic acid) nanoparticles conjugated with differentially charged hydrophilic molecules

• María Francisca Matus,
• Martín Ludueña,
• Cristian Vilos,
• Iván Palomo and
• Marcelo M. Mariscal

Beilstein J. Nanotechnol. 2018, 9, 1328–1338, doi:10.3762/bjnano.9.126

• reported when testing drugs with comparable hydrophobicity [54], which could be explained by NP–drug interactions calculated by these predictive tools. Conclusion In the present study, MD simulations provided a comprehensive understanding of the factors that contribute to PLA–PEG nanoparticle formation. To

• the best of our knowledge, this is the first time that the reactive force field ReaxFF was used to simulate polymer nanoparticle formation. We have characterized the structure of differentially charged (anionic, neutral and cationic) polymeric DSPE–PEGylated nanoparticles. We detected a self

Review on nanoparticles and nanostructured materials: history, sources, toxicity and regulations

• Jaison Jeevanandam,
• Ahmed Barhoum,
• Yen S. Chan,
• Alain Dufresne and
• Michael K. Danquah

Beilstein J. Nanotechnol. 2018, 9, 1050–1074, doi:10.3762/bjnano.9.98

• supports the formation of Ag NPs [168], phytochelatin-coated CdS by Phaeodactylum tricornutum [169], and nanocomposite and nanoporous structures via coccoliths and diatoms [139]. Since very limited studies are available, the possible mechanisms for algae-mediated nanoparticle formation are still

Mechanistic insights into plasmonic photocatalysts in utilizing visible light

• Kah Hon Leong,
• Azrina Abd Aziz,
• Lan Ching Sim,
• Pichiah Saravanan,
• Min Jang and
• Detlef Bahnemann

Beilstein J. Nanotechnol. 2018, 9, 628–648, doi:10.3762/bjnano.9.59

• of nanoparticle formation and deposition using an sustainable approach is illustrated in Figure 6. Interaction of noble metals with semiconductor materials Most of the literature claims that the incorporation of plasmonic nanoparticles with semiconductors can extend light absorption towards the

Synthesis of [{AgO₂CCH₂OMe(PPh₃)}_n] and theoretical study of its use in focused electron beam induced deposition

• Jelena Tamuliene,
• Julian Noll,
• Peter Frenzel,
• Tobias Rüffer,
• Alexander Jakob,
• Bernhard Walfort and
• Heinrich Lang

Beilstein J. Nanotechnol. 2017, 8, 2615–2624, doi:10.3762/bjnano.8.262

• was shown that coordination compounds, for example, silver(I) carboxylates can successfully be applied as single-source species for silver nanoparticle formation [6] and as gas-phase precursors in the deposition of pure, dense and conformal thin silver films [7][8][9]. This study aims for showing if

Laser-assisted fabrication of gold nanoparticle-composed structures embedded in borosilicate glass

• Nikolay Nedyalkov,
• Mihaela Koleva,
• Nadya Stankova,
• Rosen Nikov,
• Mitsuhiro Terakawa,
• Yasutaka Nakajima,
• Lyubomir Aleksandrov and
• Reni Iordanova

Beilstein J. Nanotechnol. 2017, 8, 2454–2463, doi:10.3762/bjnano.8.244

• nanoparticle formation was observed in the samples irradiated by nanosecond pulses at 355, 532 and 1064 nm. The optical properties of the irradiated areas were found to depend on the laser processing parameters; these properties were studied based on Mie theory, which was also used to correlate the

• propagation and absorption mechanisms, whose detailed description is yet to be performed. The similar behavior exhibited by the glass samples after irradiation by 266 nm nanosecond pulses hints at the same kinetics of nanoparticle formation. An estimate of the particle size, based on the plasmon band position

Advances and challenges in the field of plasma polymer nanoparticles

• Andrei Choukourov,
• Pavel Pleskunov,
• Daniil Nikitin,
• Valerii Titov,
• Artem Shelemin,
• Mykhailo Vaidulych,
• Anna Kuzminova,
• Pavel Solař,
• Jan Hanuš,
• Jaroslav Kousal,
• Ondřej Kylián,
• Danka Slavínská and
• Hynek Biederman

Beilstein J. Nanotechnol. 2017, 8, 2002–2014, doi:10.3762/bjnano.8.200

• challenges remain unresolved. Fundamental knowledge on the mechanisms of plasma polymer nanoparticle formation is still far from being complete. Although rich information regarding the nucleation and growth of nanoparticles in organosilicon and hydrocarbon plasmas is available, a deep understanding of these

Two-dimensional carbon-based nanocomposites for photocatalytic energy generation and environmental remediation applications

• Suneel Kumar,
• Ashish Kumar,
• Ashish Bahuguna,
• Vipul Sharma and
• Venkata Krishnan

Beilstein J. Nanotechnol. 2017, 8, 1571–1600, doi:10.3762/bjnano.8.159

Development of polycationic amphiphilic cyclodextrin nanoparticles for anticancer drug delivery

• Gamze Varan,
• Juan M. Benito,
• Carmen Ortiz Mellet and
• Erem Bilensoy

Beilstein J. Nanotechnol. 2017, 8, 1457–1468, doi:10.3762/bjnano.8.145

• is the optimum organic solvent for amphiphilic CDs in this study. In the nanoprecipitation technique, nanoparticle formation occurs as a result of interfacial turbulence between two unequilibrated liquid phases. For the formation of turbulence, the liquid phases (organic phase and liquid phase) used

Efficient electron-induced removal of oxalate ions and formation of copper nanoparticles from copper(II) oxalate precursor layers

• Kai Rückriem,
• Sarah Grotheer,
• Henning Vieker,
• Paul Penner,
• André Beyer,
• Armin Gölzhäuser and
• Petra Swiderek

Beilstein J. Nanotechnol. 2016, 7, 852–861, doi:10.3762/bjnano.7.77

• evidence that nanoparticle formation is primarily controlled by the available amount of precursor. Keywords: copper(II) oxalate; electron-induced reactions; layer-by-layer deposition; nanoparticle formation; thin film; Introduction Electron-induced chemistry is a versatile approach to the fabrication of

• ) oxalate is a material that has particularly favorable properties as a precursor for electron-induced nanoparticle formation at surfaces. Surface layers of this compound can be prepared with well-defined thickness using a recently established layer-by-layer deposition procedure [26]. Similar to the self

Time-dependent growth of crystalline Au⁰-nanoparticles in cyanobacteria as self-reproducing bioreactors: 2. Anabaena cylindrica

• Liz M. Rösken,
• Felix Cappel,
• Susanne Körsten,
• Christian B. Fischer,
• Andreas Schönleber,
• Sander van Smaalen,
• Stefan Geimer,
• Christian Beresko,
• Georg Ankerhold and
• Stefan Wehner

Beilstein J. Nanotechnol. 2016, 7, 312–327, doi:10.3762/bjnano.7.30

• plotted stacked in Figure 2 and a smoothened line was added to improve readability. From bottom to top data are shown for a reference without any added gold and therefore no nanoparticle formation (grey filled stars). Further samples were taken 75 minutes (black open squares), 115 min (red open circles

• the nanoparticle production [23][29]. This will not be necessarily true for metal nanoparticle formed at the cell-wall at the outside of the cell, but even this constitutes a more restricted location than in a solution. In inorganic systems effects of the confinement on the nanoparticle formation have

• cylindrica the time scale of nanoparticle formation is comparable for both cyanobacteria. Within some hours the final size of the biosynthesized nanoparticles is achieved, as recorded by XRD. In Figure 7 the average size of the gold nanoparticles is shown over the time of incubation for Anabaena cylindrica

pH-Triggered release from surface-modified poly(lactic-co-glycolic acid) nanoparticles

• Manuel Häuser,
• Klaus Langer and
• Monika Schönhoff

Beilstein J. Nanotechnol. 2015, 6, 2504–2512, doi:10.3762/bjnano.6.260

• ] or improved drug targeting. These optimization procedures are generally performed after particle assembly, since the nanoparticle formation is influenced by many parameters and often limited by minor changes in the experimental setup. However, several further surface modifications are well

Observing the morphology of single-layered embedded silicon nanocrystals by using temperature-stable TEM membranes

• Sebastian Gutsch,
• Daniel Hiller,
• Jan Laube,
• Margit Zacharias and
• Christian Kübel

Beilstein J. Nanotechnol. 2015, 6, 964–970, doi:10.3762/bjnano.6.99

• -normal distribution. The results strongly reflect the ability to control the Si NC size by geometrical one-dimensional confinement of the SRON layers. Furthermore, the influence of the SRON stoichiometry on Si nanoparticle formation is demonstrated in Figure 4c–e. Interestingly, increasing the Si excess

Biopolymer colloids for controlling and templating inorganic synthesis

• Laura C. Preiss,
• Katharina Landfester and
• Rafael Muñoz-Espí

Beilstein J. Nanotechnol. 2014, 5, 2129–2138, doi:10.3762/bjnano.5.222

• inorganic nanoparticles takes places on biopolymer molecules or on particles: (B1) Nanoparticle formation on biopolymer molecules (often referred to as “metallization” and “mineralization” of biopolymers). (B2) Biopolymer particles as support, with the formation of the inorganic nanoparticles taking place