Thickness dependent oxidation in CrCl₃: a scanning X-ray photoemission and Kelvin probe microscopies study

• Shafaq Kazim,
• Rahul Parmar,
• Maryam Azizinia,
• Matteo Amati,
• Muhammad Rauf,
• Andrea Di Cicco,
• Seyed Javid Rezvani,
• Dario Mastrippolito,
• Luca Ottaviano,
• Tomasz Klimczuk,
• Luca Gregoratti and
• Roberto Gunnella

Beilstein J. Nanotechnol. 2025, 16, 749–761, doi:10.3762/bjnano.16.58

• ). Stoichiometry determined from survey spectra using different photon beam sizes. Supporting Information Supporting Information File 32: Technical details. Acknowledgements The authors acknowledge that the results presented in this paper were initially discussed at the Società Italiana Luce di Sincrotrone

A formulation containing Cymbopogon flexuosus essential oil: improvement of biochemical parameters and oxidative stress in diabetic rats

• Ailton Santos Sena-Júnior,
• Cleverton Nascimento Santana Andrade,
• Pedro Henrique Macedo Moura,
• Jocsã Hémany Cândido dos Santos,
• Cauãn Torres Trancoso,
• Eloia Emanuelly Dias Silva,
• Deise Maria Rego Rodrigues Silva,
• Ênio Pereira Telles,
• Luiz André Santos Silva,
• Isabella Lima Dantas Teles,
• Sara Fernanda Mota de Almeida,
• Daniel Alves de Souza,
• Jileno Ferreira Santos,
• Felipe José Aidar Martins,
• Ana Mara de Oliveira e Silva,
• Sandra Lauton-Santos,
• Guilherme Rodolfo Souza de Araujo,
• Cristiane Bani Correa,
• Rogéria De Souza Nunes,
• Lysandro Pinto Borges and
• Ana Amélia Moreira Lira

Beilstein J. Nanotechnol. 2025, 16, 617–636, doi:10.3762/bjnano.16.48

• chosen based on a previous paper from our research group [49]. The proportions of the components were defined using the pseudoternary phase diagram [50]. First, the surfactant phase was prepared from a mixture of Tween® 80 and Eumulgin® CO40 in a ratio of 1:1 (w/w) by magnetic homogenization for 24 h

Focused ion and electron beams for synthesis and characterization of nanomaterials

• Aleksandra Szkudlarek

Beilstein J. Nanotechnol. 2025, 16, 613–616, doi:10.3762/bjnano.16.47

• towards its further development, a comprehensive roadmap for focused ion beam technologies has been recently published by an interdisciplinary group of international experts. Although not part of this thematic issue, we encourage the reader to take a look at the original paper [17]. While achieving

Nanomaterials in targeting amyloid-β oligomers: current advances and future directions for Alzheimer's disease diagnosis and therapy

• Shiwani Randhawa,
• Trilok Chand Saini,
• Manik Bathla,
• Rahul Bhardwaj,
• Rubina Dhiman and
• Amitabha Acharya

Beilstein J. Nanotechnol. 2025, 16, 561–580, doi:10.3762/bjnano.16.44

• developed a robust and straightforward method for creating multichamber paper devices using wax printing techniques, which they applied to detect AβOs. This approach leverages copper-enhanced gold nanoprobe colorimetric immunoblotting, achieving detection limits as low as 23.7 pg/mL, visible through a

Functionalized gold nanoflowers on carbon screen-printed electrodes: an electrochemical platform for biosensing hemagglutinin protein of influenza A H1N1 virus

• Carlos Enrique Torres-Méndez,
• Sharmilee Nandi,
• Klara Martinovic,
• Patrizia Kühne,
• Yifan Liu,
• Sam Taylor,
• Maria Lysandrou,
• Maria Ines Berrojo Romeyro Mascarenhas,
• Viktoria Langwallner,
• Javier Enrique Sebastián Alonso,
• Ivana Jovanovic,
• Maike Lüftner,
• Georgia-Vasiliki Gkountana,
• David Bern,
• Abdul-Raouf Atif,
• Ehsan Manouchehri Doulabi,
• Gemma Mestres and
• Masood Kamali-Moghaddam

Beilstein J. Nanotechnol. 2025, 16, 540–550, doi:10.3762/bjnano.16.42

• in a 1.5 mL Eppendorf vial by adding 100 μL of 38 μg/mL mABs solution in PBS, 100 μL of 10 mM EDC aqueous solution, and 100 μL of 10 mM NHS aqueous solution. The pH of the mixture was 6.5 as determined by litmus paper. Then, 10 μL of the mixture was added on top of the 4-ATP/AuNFs/CSPE as working

Water in nanoporous hexagonal boron nitride nanosheets: a first-principles study

• Juliana A. Gonçalves,
• Ronaldo J. C. Batista and
• Marcia C. Barbosa

Beilstein J. Nanotechnol. 2025, 16, 510–519, doi:10.3762/bjnano.16.39

• passage of ions and polar molecules. However, the use of h-BN as a membrane for water desalination is still a relatively new area of research. In this paper we propose an analysis using first-principles calculations to understand the stability of pores in monolayer h-BN and their interaction with water

• . The remainder of the paper is organized as follows: In section “Theoretical Methods”, we present the details of the calculations, in section “Results and Discussion”, results are shown and discussed, and section “Conclusion” brings the conclusions. Theoretical Methods We performed calculations based

Performance optimization of a microwave-coupled plasma-based ultralow-energy ECR ion source for silicon nanostructuring

• Joy Mukherjee,
• Safiul Alam Mollick,
• Tanmoy Basu and
• Tapobrata Som

Beilstein J. Nanotechnol. 2025, 16, 484–494, doi:10.3762/bjnano.16.37

• Centers for Research and Education in Science and Technology, Kolkata, West Bengal, 700 091, India Homi Bhabha National Institute, Training School Complex, Anushaktinagar, Mumbai - 400 085, India 10.3762/bjnano.16.37 Abstract This paper presents a comprehensive optimization of key parameters for

Impact of adsorbate–substrate interaction on nanostructured thin films growth during low-pressure condensation

• Alina V. Dvornichenko,
• Vasyl O. Kharchenko and
• Dmitrii O. Kharchenko

Beilstein J. Nanotechnol. 2025, 16, 473–483, doi:10.3762/bjnano.16.36

• morphological transformation of the growing layer. The results obtained within this work can be used to control the morphology of the growing thin films, that is, type and size of surface structures, by exploiting different deposited materials on different substrates. The paper is organized in the following

Effect of additives on the synthesis efficiency of nanoparticles by laser-induced reduction

• Rikuto Kuroda,
• Takahiro Nakamura,
• Hideki Ina and
• Shuhei Shibata

Beilstein J. Nanotechnol. 2025, 16, 464–472, doi:10.3762/bjnano.16.35

• additives. In this paper, we have demonstrated how to improve the efficiency of nanoparticle synthesis by LRL using a chemical approach. In addition, we will also investigate methods to improve the efficiency of nanoparticle synthesis by combining optical approaches such as laser scanning and multi-point

Size control of nanoparticles synthesized by pulsed laser ablation in liquids using donut-shaped beams

• Abdel Rahman Altakroury,
• Oleksandr Gatsa,
• Farbod Riahi,
• Zongwen Fu,
• Miroslava Flimelová,
• Andrei Samokhvalov,
• Stephan Barcikowski,
• Carlos Doñate-Buendía,
• Alexander V. Bulgakov and
• Bilal Gökce

Beilstein J. Nanotechnol. 2025, 16, 407–417, doi:10.3762/bjnano.16.31

• distributions, and higher sphericity. The changes in particle sizes may also be attributed to distinct cavitation bubble dynamics induced by the donut-shaped beam (Figure 5). While a detailed investigation into cavitation dynamics is beyond the scope of this paper, preliminary observations suggest that the

ReactorAFM/STM – dynamic reactions on surfaces at elevated temperature and atmospheric pressure

• Tycho Roorda,
• Hamed Achour,
• Matthijs A. van Spronsen,
• Marta E. Cañas-Ventura,
• Sander B. Roobol,
• Willem Onderwaater,
• Mirthe Bergman,
• Peter van der Tuijn,
• Gertjan van Baarle,
• Johan W. Bakker,
• Joost W. M. Frenken and
• Irene M. N. Groot

Beilstein J. Nanotechnol. 2025, 16, 397–406, doi:10.3762/bjnano.16.30

• insights of the electronic state and structure of the surface, AFM offers structural and electrostatic information. Therefore, combining AFM with STM brings the best of both techniques together and offers a more precise understanding of catalytic systems. In this paper, we present the design of a combined

Engineered PEG–PCL nanoparticles enable sensitive and selective detection of sodium dodecyl sulfate: a qualitative and quantitative analysis

• Soni Prajapati and
• Ranjana Singh

Beilstein J. Nanotechnol. 2025, 16, 385–396, doi:10.3762/bjnano.16.29

• polymerization, the resulting complexes were cooled down to room temperature, dissolved in DCM, and precipitated using an excess of cold diethyl ether. The precipitates were isolated by filtration using filter paper and dried under vacuum. The collected PEG–PCL NPs were then subjected to further characterization

Vortex lattices of layered HTSCs at different vortex–vortex interaction potentials

• Valerii P. Lenkov,
• Anastasia N. Maksimova,
• Anna N. Moroz and
• Vladimir A. Kashurnikov

Beilstein J. Nanotechnol. 2025, 16, 362–370, doi:10.3762/bjnano.16.27

• magnetic field penetration depth and the coherence length [28]. In this paper, the following forms of this dependence are used: and These relations fairly accurately reflect the temperature dependence of the characteristic lengths in bismuth HTSC [29]. In this work, in addition to the classical potential

Pulsed laser in liquid grafting of gold nanoparticle–carbon support composites

• Madeleine K. Wilsey,
• Teona Taseska,
• Qishen Lyu,
• Connor P. Cox and
• Astrid M. Müller

Beilstein J. Nanotechnol. 2025, 16, 349–361, doi:10.3762/bjnano.16.26

• , University of Rochester, Rochester, New York 14627, United States 10.3762/bjnano.16.26 Abstract We developed a novel pulsed laser-assisted process for the fabrication of advanced composites of nonequilibrium gold nanoparticles on carbon fiber paper supports. Our one-step process integrates the generation of

• nanoparticles with their surface attachment and solves longstanding nanoparticle adhesion and electrical contact issues. Irradiation of hydrophilic carbon fiber paper submerged in aqueous HAuCl4 solution by nanosecond laser pulses produced composites with uniform distribution of gold nanoparticles on carbon

• fibers, taking advantage of the high internal surface area of carbon fiber paper. The pulsed laser-grafted composites exhibited zero measurable charge transfer resistance between gold nanoparticles and the carbon support, leading to superior cathode performance over conventionally prepared electrodes for

Enhancing mechanical properties of chitosan/PVA electrospun nanofibers: a comprehensive review

• Nur Areisman Mohd Salleh,
• Amalina Muhammad Afifi,
• Fathiah Mohamed Zuki and
• Hanna Sofia SalehHudin

Beilstein J. Nanotechnol. 2025, 16, 286–307, doi:10.3762/bjnano.16.22

• membrane can be tricky in terms of handling and thickness measurements used for stress calculations [132]. Preparation of specimens requires attention to prevent damage, pretension, or slipping from grips during testing. Maccaferri et al. [133] demonstrated the use of a paper frame to hold the specimen in

Emerging strategies in the sustainable removal of antibiotics using semiconductor-based photocatalysts

• Yunus Ahmed,
• Keya Rani Dutta,
• Parul Akhtar,
• Md. Arif Hossen,
• Md. Jahangir Alam,
• Obaid A. Alharbi,
• Hamad AlMohamadi and
• Abdul Wahab Mohammad

Beilstein J. Nanotechnol. 2025, 16, 264–285, doi:10.3762/bjnano.16.21

Radiosensitizing properties of dual-functionalized carbon nanostructures loaded with temozolomide

• Radmila Milenkovska,
• Nikola Geskovski,
• Dushko Shalabalija,
• Ljubica Mihailova,
• Petre Makreski,
• Dushko Lukarski,
• Igor Stojkovski,
• Maja Simonoska Crcarevska and
• Kristina Mladenovska

Beilstein J. Nanotechnol. 2025, 16, 229–251, doi:10.3762/bjnano.16.18

• controlled release of TMZ [41][42]. In another publication [25], the suitability of graphene oxide (GO) functionalized with folic acid (FA) for controlled release of TMZ and the inhibition of glioma growth was confirmed in vivo. To our knowledge (and stated also in the paper of Petrenko et al. [35]), our

• biopharmaceutical properties [43]. In this paper, TMZ was incorporated in the same carriers, this time covalently dual-functionalized with PEG (average Mw 6000 g/mol) and FA, with an overall aim to prolong the TMZ circulation time (through the stealth effect of PEG) and to increase permeability through the BBTB and

• effects on the proliferation of cancer cells by blocking the cell cycle in the G0/G1 phase and increasing the osmotic pressure [91][92]. In addition, in a paper of Xu et al. [93], dynamic biological interactions between PEG and cells on the molecular level were clarified, explaining both the inhibitory

Recent advances in photothermal nanomaterials for ophthalmic applications

• Jiayuan Zhuang,
• Linhui Jia,
• Chenghao Li,
• Rui Yang,
• Jiapeng Wang,
• Wen-an Wang,
• Heng Zhou and
• Xiangxia Luo

Beilstein J. Nanotechnol. 2025, 16, 195–215, doi:10.3762/bjnano.16.16

• boundaries of thermal therapy, achieving unparalleled therapeutic effects through their diverse composite structures and demonstrating enormous potential in promoting retinal drug delivery and photoacoustic imaging. This paper provides a comprehensive summary of the structure–activity relationship between

• conditions [19][20][21]. The straightforward and cost-effective fabrication of photothermal nanomaterials enhances their practicality, promising rapid advancements in the field of photothermal nanotherapeutics in ophthalmology. This paper reviews recent research progress in the application of photothermal

A review of metal-organic frameworks and polymers in mixed matrix membranes for CO₂ capture

• Charlotte Skjold Qvist Christensen,
• Nicholas Hansen,
• Mahboubeh Motadayen,
• Nina Lock,
• Martin Lahn Henriksen and
• Jonathan Quinson

Beilstein J. Nanotechnol. 2025, 16, 155–186, doi:10.3762/bjnano.16.14

Clays enhanced with niobium: potential in wastewater treatment and reuse as pigment with antibacterial activity

• Silvia Jaerger,
• Patricia Appelt,
• Mario Antônio Alves da Cunha,
• Fabián Ccahuana Ayma,
• Ricardo Schneider,
• Carla Bittencourt and
• Fauze Jacó Anaissi

Beilstein J. Nanotechnol. 2025, 16, 141–154, doi:10.3762/bjnano.16.13

• ; Introduction The most found dye pollutants in wastewater on a global scale originate from textile, plastic, paper, food, cosmetics, mineral, and pharmaceutical industries, among others, resulting in significant environmental impacts [1]. Dyes, as chemical compounds that impart color to different materials

• , play a crucial role in industries requiring coloring, such as textile, food, cosmetics, rubber, printing, paper, and plastic. Globally, an estimated 7 × 105 tons of dyes are produced, with 10–15% typically disposed of as wastewater pollutants [2]. Among the most used dyes, methylene blue (MB) is an

Comparison of organic and inorganic hole transport layers in double perovskite material-based solar cell

• Deepika K and
• Arjun Singh

Beilstein J. Nanotechnol. 2025, 16, 119–127, doi:10.3762/bjnano.16.11

• could have appeared to influence the work reported in this paper.

Modeling and simulation of carbon-nanocomposite-based gas sensors

• Roopa Hegde,
• Punya Prabha V,
• Shipra Upadhyay and
• Krishna S B

Beilstein J. Nanotechnol. 2025, 16, 90–96, doi:10.3762/bjnano.16.9

• Roopa Hegde Punya Prabha V Shipra Upadhyay Krishna S B Electronics and Communication Engineering, Ramaiah Institute of Technology, MSRIT Post, M S Ramaiah Nagar, MSR Nagar, Bengaluru, Karnataka 560054, India 10.3762/bjnano.16.9 Abstract This paper reports simulation of a carbon monoxide gas

Instance maps as an organising concept for complex experimental workflows as demonstrated for (nano)material safety research

• Benjamin Punz,
• Maja Brajnik,
• Joh Dokler,
• Jaleesia D. Amos,
• Litty Johnson,
• Katie Reilly,
• Anastasios G. Papadiamantis,
• Amaia Green Etxabe,
• Lee Walker,
• Diego S. T. Martinez,
• Steffi Friedrichs,
• Klaus M. Weltring,
• Nazende Günday-Türeli,
• Claus Svendsen,
• Christine Ogilvie Hendren,
• Mark R. Wiesner,
• Martin Himly,
• Iseult Lynch and
• Thomas E. Exner

Beilstein J. Nanotechnol. 2025, 16, 57–77, doi:10.3762/bjnano.16.7

• started using instance maps to aid the design and planning of experiments, as communication and instructional tools at individual and collaborative levels, and in educational settings. This paper presents examples of such new applications of instance maps for planning, documenting, and sharing study

• differentiate between different types of properties (see Figure 1 and Figure 2). In the NIKC curation efforts, all data were extracted from scientific publications; thus, there was no obvious separation in the eyes of the curator between data produced specifically within a paper (primary data) or data taken

• can be accessed under username: SupportingInfo and password: maps-for-paper). The following functionalities are available: (i) creation and modification of instance maps and provision of basic metadata, (ii) linking of data and other research outputs to individual nodes, and (iii) sharing of instance

A nanocarrier containing carboxylic and histamine groups with dual action: acetylcholine hydrolysis and antidote atropine delivery

• Elina E. Mansurova,
• Andrey A. Maslennikov,
• Anna P. Lyubina,
• Alexandra D. Voloshina,
• Irek R. Nizameev,
• Marsil K. Kadirov,
• Anzhela A. Mikhailova,
• Polina V. Mikshina,
• Albina Y. Ziganshina and
• Igor S. Antipin

Beilstein J. Nanotechnol. 2025, 16, 11–24, doi:10.3762/bjnano.16.2

• breaks down acetylcholine into choline and acetic acid. The latter acts on the boronate bonds, dissociating them. This leads to the destruction of the nanocarrier and the release of the antidote. The paper covers the creation of the nanocarrier, its physicochemical and biological properties

• disintegrates the nanocarrier, leading to the release of Atr (Scheme 1). This paper discusses the synthesis of the Atr nanocarrier, its physicochemical and biological properties, the encapsulation of Atr into the nanocarrier cavity, ACh hydrolysis, nanocarrier degradation, and Atr release under the ACh action

Attempts to preserve and visualize protein corona on the surface of biological nanoparticles in blood serum using photomodification

• Julia E. Poletaeva,
• Anastasiya V. Tupitsyna,
• Alina E. Grigor’eva,
• Ilya S. Dovydenko and
• Elena I. Ryabchikova

Beilstein J. Nanotechnol. 2024, 15, 1654–1666, doi:10.3762/bjnano.15.130

• copper grids covered with formvar film. A drop of a sample was adsorbed for 1 min on a grid, excess of the liquid was removed by a pipette; then, the wet grid was placed on a drop of 0.5% aqueous uranyl acetate solution for 10 s, excess liquid was removed with filter paper. Grids were air-dried and