BiOCl/TiO₂/diatomite composites with enhanced visible-light photocatalytic activity for the degradation of rhodamine B

• Minlin Ao,
• Kun Liu,
• Xuekun Tang,
• Zishun Li,
• Qian Peng and
• Jing Huang

Beilstein J. Nanotechnol. 2019, 10, 1412–1422, doi:10.3762/bjnano.10.139

• a carrier to support a layer of titanium dioxide (TiO2) nanoparticles and bismuth oxychloride (BiOCl) nanosheets. The results show that TiO2 nanoparticles and BiOCl nanosheets uniformly cover the surface of diatomite and bring TiO2 and BiOCl into close proximity. Rhodamine B was used as the target

• nanosheets can be found on the surface. Elemental mapping was carried out by energy-dispersive X-ray spectroscopy (EDS) to study the elemental dispersion on the BTD surface. Figure 5 shows that the elements Bi, Si, Cl, O and Ti distribute uniformly on the diatomite disc, which confirms the successful

Kelvin probe force microscopy of the nanoscale electrical surface potential barrier of metal/semiconductor interfaces in ambient atmosphere

• Petr Knotek,
• Tomáš Plecháček,
• Jan Smolík,
• Petr Kutálek,
• Filip Dvořák,
• Milan Vlček,
• Jiří Navrátil and
• Čestmír Drašar

Beilstein J. Nanotechnol. 2019, 10, 1401–1411, doi:10.3762/bjnano.10.138

• nanosheets through the reaction with the Bi2Se3. The Schottky barrier formed by the 1D and 2D nanoinclusions was characterized by means of atomic force microscopy (AFM). We used Kelvin probe force microscopy (KPFM) in ambient atmosphere at the nanoscale and compared the results to those of ultraviolet

• forming Au/Bi2Se3 alloy and NIs in the shape of a semispherical defect, whereas Mo reacts with the matrix and forms thermodynamically more stable layered MoSe2 in the shape of nanosheets. Experimental Single crystalline Bi2Se3 samples were grown by heating stoichiometric mixtures of the pure elements

Photoactive nanoarchitectures based on clays incorporating TiO₂ and ZnO nanoparticles

• Eduardo Ruiz-Hitzky,
• Pilar Aranda,
• Marwa Akkari,
• Nithima Khaorapapong and
• Makoto Ogawa

Beilstein J. Nanotechnol. 2019, 10, 1140–1156, doi:10.3762/bjnano.10.114

• reactivity can be modified [48][49]. TiO2 and ZnO NPs with different shapes, sizes and exposed crystal facets were assembled to yield hollow particles, fibers, nanosheets, nanowires, nanorods, nanoflowers and nanobelts through various synthesis routes including template synthesis [50][51][52][53

• presence of smectites as a result of the re-stacking of the exfoliated nanosheets has been reported [84]. Due to the variety of hierarchical structures and particle locations (at the external surface or in the interlayer space), the resulting particle size distribution of ZnO NPs can be very wide

Synthesis of novel C-doped g-C₃N₄ nanosheets coupled with CdIn₂S₄ for enhanced photocatalytic hydrogen evolution

• Jingshuai Chen,
• Chang-Jie Mao,
• Helin Niu and
• Ji-Ming Song

Beilstein J. Nanotechnol. 2019, 10, 912–921, doi:10.3762/bjnano.10.92

• crystals on the surface of CCN nanosheets via a hydrothermal method. This unique architecture was able to efficiently promote the transfer and separation of photon-generated charges, enhance light absorption, and significantly increase photocatalytic H2 production. Detailed characterization was performed

• photogenerated holes and electrons. Yang et al. designed and constructed a 2D/2D nanocomposite photocatalyst through the in situ generation of ZnIn2S4 nanoleaf structures on the surface of g-C3N4 nanosheets by a facile one-step solvothermal method with surfactant, which exhibited distinct high-speed charge

• as precursors. Subsequently, the CCN was dispersed in an aqueous solution containing thiourea, Cd(NO3)2·4H2O and In(NO3)3·4.5H2O. As a result of the electrostatic attraction between cations and negatively charged CCN [34], Cd2+ and In3+ could easily load on to the surface of the CCN nanosheets

Tungsten disulfide-based nanocomposites for photothermal therapy

• Tzuriel Levin,
• Hagit Sade,
• Rina Ben-Shabbat Binyamini,
• Maayan Pour,
• Iftach Nachman and
• Jean-Paul Lellouche

Beilstein J. Nanotechnol. 2019, 10, 811–822, doi:10.3762/bjnano.10.81

• latter group, nanostructures of metals [38], metal oxides (including iron oxides) [39], and metal chalcogenides [40][41] were studied. Tungsten oxides [42] and molybdenum oxides [43] were studied, as well as their disulfides. The disulfides were tested mainly in the forms of nanosheets [44], nanoflakes

Mo-doped boron nitride monolayer as a promising single-atom electrocatalyst for CO₂ conversion

• Qianyi Cui,
• Gangqiang Qin,
• Weihua Wang,
• Lixiang Sun,
• Aijun Du and
• Qiao Sun

Beilstein J. Nanotechnol. 2019, 10, 540–548, doi:10.3762/bjnano.10.55

• ][44]. Recent reports show that single-TM-doped BN nanomaterials have been used as efficient catalysts in the reactions of N2 fixation and CO oxidation [45][46]. It is worth noting that Chen and co-workers reported that single Mo supported on defective BN nanosheets presents a highly efficient

• analysis. According to previous studies [45][52][53], especially the study of Mo-doped BN nanosheets as a catalyst for N2 fixation [45], the intermediate was divided into three moieties for research. These were the CxHyOz (moiety 1) as the product of CO2 hydrogenation reaction of each step, MoN3 (moiety 2

Temperature-dependent Raman spectroscopy and sensor applications of PtSe₂ nanosheets synthesized by wet chemistry

• Mahendra S. Pawar and
• Dattatray J. Late

Beilstein J. Nanotechnol. 2019, 10, 467–474, doi:10.3762/bjnano.10.46

• method used to grow PtSe2 nanosheets followed by thermal annealing. The SEM and TEM analysis confirms the formation of PtSe2 nanosheets. Furthermore, XRD, Raman, XPS and SAED patterns were used to analyze the crystal structure and to confirm the formation of the PtSe2 phase. The temperature-dependent

• Raman spectroscopy investigations were carried out on PtSe2 nanosheets deposited on Si substrates in the temperature range 100–506 K. The shifts in Raman active Eg and A1g modes as a function of temperature were monitored. The temperature coefficient for both modes was calculated and was found to match

• well with the reported 2D transition metal dichalcogenides. A PtSe2 nanosheet-based sensor device was tested for its applicability as a humidity sensor and photodetector. The humidity sensor based on PtSe2 nanosheets showed an excellent recovery time of ≈5 s, indicating the great potential of PtSe2 for

Reduced graphene oxide supported C₃N₄ nanoflakes and quantum dots as metal-free catalysts for visible light assisted CO₂ reduction

• Md Rakibuddin and
• Haekyoung Kim

Beilstein J. Nanotechnol. 2019, 10, 448–458, doi:10.3762/bjnano.10.44

• , we report the synthesis of novel reduced graphene oxide (rGO)-supported C3N4 nanoflake (NF) and quantum dot (QD) hybrid materials (GCN) for visible light induced reduction of CO2. The C3N4 NFs and QDs are prepared by acid treatment of C3N4 nanosheets followed by ultrasonication and hydrothermal

• heating at 130–190 °C for 5−20 h. It is observed that hydrothermal exposure of acid-treated graphitic carbon nitride (g-C3N4) nanosheets at low temperature generated larger NFs, whereas QDs are formed at higher temperatures. The formation of GCN hybrid materials was confirmed by powder X-ray diffraction

• of the photocatalytic product, formaldehyde (HCHO), is monitored spectrophotometrically using the Nash reagent, and also confirmed by gas chromatography. Results and Discussion Material characterization The preparation of g-C3N4 NFs and QDs from nanosheets and the formation of the GCN hybrid material

A Ni(OH)₂ nanopetals network for high-performance supercapacitors synthesized by immersing Ni nanofoam in water

• Donghui Zheng,
• Man Li,
• Yongyan Li,
• Chunling Qin,
• Yichao Wang and
• Zhifeng Wang

Beilstein J. Nanotechnol. 2019, 10, 281–293, doi:10.3762/bjnano.10.27

• . demonstrated a nickel hydroxide@nanoporous gold/Ni foam electrode, which was synthesized by electrodeposition of a Sn–Au alloy on nickel foam with subsequent dealloying of Sn and electrodepostion of Ni(OH)2 on the nanoporous gold/Ni foam [25]. Liu et al. created Ni(OH)2/Cu2O nanosheets on nanoporous NiCu alloy

• no report on the in situ synthesis of nickel hydroxide nanosheets on Ni nanofoam through a simple and environmentally friendly method. In the present work, we propose a simple and environmentally friendly two-step preparation, including the dealloying of Ni40Zr20Ti40 metallic glass in HF solutions

Thermal control of the defunctionalization of supported Au₂₅(glutathione)₁₈ catalysts for benzyl alcohol oxidation

• Zahraa Shahin,
• Hyewon Ji,
• Rodica Chiriac,
• Nadine Essayem,
• Franck Rataboul and
• Aude Demessence

Beilstein J. Nanotechnol. 2019, 10, 228–237, doi:10.3762/bjnano.10.21

• hydroperoxide or by calcination at 300 °C and showed, in both cases, incomplete conversion of the alcohol (46%) under 5 bar of O2, at 30 °C and in the presence of a base [32]. Another heterogeneous catalyst, Au25(dodecanethiolate)18 deposited on porous carbon nanosheets, has been thermally treated at 500 °C for

• supported on hierarchically porous carbon nanosheets [17] and Au25(SPhNH2)17 supported on SBA-15 [21], both calcined at 400 °C, showed 67% and 68% of selectivity for benzaldehyde, respectively. Thus, the 100% selectivity for benzaldehyde of Au25(SG)18 over ZrO2 when calcined at 400 °C may result from the

• different compositions of the clusters or the effect of the type of support that can be involved in the oxidation mechanism or their different morphologies, as porous materials for the carbon nanosheets and the silica, and nanoparticles for ZrO2. Effect of the reaction temperature In general, the oxidation

Ternary nanocomposites of reduced graphene oxide, polyaniline and hexaniobate: hierarchical architecture and high polaron formation

• Claudio H. B. Silva,
• Maria Iliut,
• Christopher Muryn,
• Christian Berger,
• Zachary Coldrick,
• Vera R. L. Constantino,
• Marcia L. A. Temperini and
• Aravind Vijayaraghavan

Beilstein J. Nanotechnol. 2018, 9, 2936–2946, doi:10.3762/bjnano.9.272

• as n-alkylamines and tetra(n-alkyl)ammonium hydroxides, giving rise to colloidal dispersions of nanoparticles of different morphologies such as nanosheets and nanoscrolls [32][33]. As reported previously [6], the treatment of H2K2Nb6O17 with tetra(n-butyl)ammonium hydroxide (TBAOH) is an efficient

Layered calcium phenylphosphonate: a hybrid material for a new generation of nanofillers

• Kateřina Kopecká,
• Ludvík Beneš,
• Klára Melánová,
• Vítězslav Zima,
• Petr Knotek and
• Kateřina Zetková

Beilstein J. Nanotechnol. 2018, 9, 2906–2915, doi:10.3762/bjnano.9.269

• /bjnano.9.269 Abstract The use of nanosheets of layered calcium phenylphosphonate as a filler in a polymeric matrix was investigated. Layered calcium phenylphosphonate (CaPhP), with chemical formula CaC6H5PO3∙2H2O, is a hybrid organic–inorganic material that exhibits a hydrophobic character due to the

• layered structure and thus fillers formed from nanosheets can be obtained [1][2]. Convenient interactions among functional groups of the polymer chain and the surface groups of the filler are necessary to retain the nanoscale character of the filler and to protect it from the formation of agglomerates in

• precursor for the preparation of nanosheets by exfoliation. Exfoliation is a process whereby thin sheets of material are completely separated from the bulk. This happens when cohesive forces between the adjacent planes, which are usually caused by van der Waals interactions, are overcome. Mechanical or

Nanostructure-induced performance degradation of WO₃·nH₂O for energy conversion and storage devices

• Zhenyin Hai,
• Mohammad Karbalaei Akbari,
• Zihan Wei,
• Danfeng Cui,
• Chenyang Xue,
• Hongyan Xu,
• Philippe M. Heynderickx,
• Francis Verpoort and
• Serge Zhuiykov

Beilstein J. Nanotechnol. 2018, 9, 2845–2854, doi:10.3762/bjnano.9.265

• flower-like balls on the upper layer and nanosheets beneath them as represented in Figure 2c. The nanosheets were ca. 1.3 μm square-shaped and almost vertically aligned on the substrate (Figure 2d,e). The image of a typical nanosheet shows the very low thickness of ca. 27 nm (Figure 2f). The upper layer

• with grouped flower-like balls is highlighted in Figure 2g,h. The images show that the flower-like balls have a diameter of ca. 2.5 μm and are composed of self-assembled square nanosheets with similar sizes as the nanosheets in the layer grown beneath. The magnified image in Figure 2i displays

• nanosheets with average thickness of ca. 37 nm in a flower-like ball crossing each other. Figure 3 shows SEM images of the sample synthesized at 120 °C. The as-grown pure WO3·H2O existed in form of square sheets and hexagonal plates as displayed in Figure 3a–c. The square sheets were measured to be ca. 6 μm

Impact of the anodization time on the photocatalytic activity of TiO₂ nanotubes

• Jesús A. Díaz-Real,
• Geyla C. Dubed-Bandomo,
• Juan Galindo-de-la-Rosa,
• Luis G. Arriaga,
• Janet Ledesma-García and
• Nicolas Alonso-Vante

Beilstein J. Nanotechnol. 2018, 9, 2628–2643, doi:10.3762/bjnano.9.244

• synthesis methods resulting in a wide range of morphologies, such as mesoporous structures [4], microtubes [5], microdendrites, nanoparticles [6][7][8], nanorods [9][10], nanotubes [11][12][13], nanowires [14], and nanosheets [15][16]. Standing out from the rest of the synthesis techniques, electrochemical

Lead-free hybrid perovskites for photovoltaics

• Oleksandr Stroyuk

Beilstein J. Nanotechnol. 2018, 9, 2209–2235, doi:10.3762/bjnano.9.207

• photodetector is characterized by an on/off ratio as high as ≈105 and a prolonged stability retaining the unvaried response after a shelf-storage for at least three months (Figure 11a). The efficiency of solar cells based on Cs3Bi2I9 HP nanosheets was found to depend on the composition of the HTL layer. The

Electrospun one-dimensional nanostructures: a new horizon for gas sensing materials

• Muhammad Imran,
• Nunzio Motta and
• Mahnaz Shafiei

Beilstein J. Nanotechnol. 2018, 9, 2128–2170, doi:10.3762/bjnano.9.202

Synthesis of carbon nanowalls from a single-source metal-organic precursor

• André Giese,
• Sebastian Schipporeit,
• Volker Buck and
• Nicolas Wöhrl

Beilstein J. Nanotechnol. 2018, 9, 1895–1905, doi:10.3762/bjnano.9.181

• acetylacetonate; carbon nanowalls; growth zones; ICP PECVD; metal-organic precursor; Introduction The first report of the synthesis of carbon nanowalls (CNWs), i.e., wall-like carbon nanosheets aligned perpendicular to the substrate, was given by Wu and co-workers [1]. The average thickness of these sheets was

• number of dangling bonds that act as nucleation sites for randomly orientated carbon nanoflakes. 2D growth and the subsequent formation of (few-layer) graphene sheets follow. The nanoflakes being almost vertically aligned on the substrate grow fastest to finally form vertically standing nanosheets. The

Improving the catalytic activity for hydrogen evolution of monolayered SnSe_2(1−x)S_2x by mechanical strain

• Sha Dong and
• Zhiguo Wang

Beilstein J. Nanotechnol. 2018, 9, 1820–1827, doi:10.3762/bjnano.9.173

• between 1.85 and 1.99 eV by varying x from 0 to 1. Other 2D-TMDs alloy nanosheets, such as Mo1−xWxSe2 [39] and WS2(1−x)Se2x [40][41], have also shown tuneable bandgaps and different electrical properties by varying the value of x. Monolayer SnS2 and SnSe2 have indirect bandgaps of 2.1 and 1.1 eV

• in recent decades to the development of inexpensive catalysts for the electrochemical HER. Some of the recent studies have focused on monolayer SnX2 (X = S, Se). Liu et al. [43] investigated SnS2 nanosheets regarding their electrochemical behaviour and electrocatalytic properties for HER by examining

Toward the use of CVD-grown MoS₂ nanosheets as field-emission source

• Geetanjali Deokar,
• Nitul S. Rajput,
• Junjie Li,
• Francis Leonard Deepak,
• Wei Ou-Yang,
• Nicolas Reckinger,
• Carla Bittencourt,
• Jean-Francois Colomer and
• Mustapha Jouiad

Beilstein J. Nanotechnol. 2018, 9, 1686–1694, doi:10.3762/bjnano.9.160

• ), CIRMAP, Research Institute for Materials Science and Engineering, University of Mons, Mons, Belgium 10.3762/bjnano.9.160 Abstract Densely populated edge-terminated vertically aligned two-dimensional MoS2 nanosheets (NSs) with thicknesses ranging from 5 to 20 nm were directly synthesized on Mo films

• ; molybdenum disulfide (MoS2); nanosheets; sulfurization; transmission electron microscopy (TEM); Introduction There is a great interest in the development of one- and two-dimensional (1D and 2D) materials for field-emission (FE) based cathodes using various nanostructured materials [1] for applications in

• displays, X-ray sources and cold-cathode electron sources [2]. 1D and 2D materials such as carbon nanotubes [3], ZnO nanorods [1], LaB6 nanowires [2], SnS2 nanosheets (NSs) [4], vertically aligned graphene [5], WS2 nanotubes [6], MoSe2 nanosheets [7], and MoS2 NSs [8][9][10] are potential field-emitter

Free-radical gases on two-dimensional transition-metal disulfides (XS₂, X = Mo/W): robust half-metallicity for efficient nitrogen oxide sensors

• Chunmei Zhang,
• Yalong Jiao,
• Fengxian Ma,
• Sri Kasi Matta,
• Steven Bottle and
• Aijun Du

Beilstein J. Nanotechnol. 2018, 9, 1641–1646, doi:10.3762/bjnano.9.156

• results also suggest XS2 (X = Mo, W) nanosheets can act as promising nanoscale NO sensors. Keywords: free radical; half-metallicity; nitric oxide (NO); sensors; spin-polarized; Introduction Nitrogen oxide (NOx) gases, one of the most common groups of air pollutants, are known as one culprit of acid rain

Sheet-on-belt branched TiO₂(B)/rGO powders with enhanced photocatalytic activity

• Huan Xing,
• Wei Wen and
• Jin-Ming Wu

Beilstein J. Nanotechnol. 2018, 9, 1550–1557, doi:10.3762/bjnano.9.146

• common but still draws much attention. Many types of TiO2(B) nanostructures have been synthesized, such as nanowires [9][10], nanotubes [11], nanobelts [12][13][14], nanofibers [15] and nanosheets [16]. TiO2(B) is mostly used in lithium-ion batteries due to its relatively open crystal structure, superior

• in Figure 3a). Figure 3b shows more clearly the radially growing nanosheets along the nanobelt trunk. The average length of the nanosheet branches is ≈100 nm. The selected area electron diffraction (SAED) pattern collected from several “sheet-on-belt” nanostructures indicates diffraction rings

• heterogeneously on metallic Ti foils, such titanates decomposed to anatase TiO2 upon calcination in air at 400 °C for 1 h [32][33]. In the current investigation, hydrogen titanate nanosheets are supposed to nucleate heterogeneously on the TiO2(B) trunks via surface deficiencies or exposed ledges when immersing

Cr(VI) remediation from aqueous environment through modified-TiO₂-mediated photocatalytic reduction

• Rashmi Acharya,
• Brundabana Naik and
• Kulamani Parida

Beilstein J. Nanotechnol. 2018, 9, 1448–1470, doi:10.3762/bjnano.9.137

• facilitation by a RGO nanosheets, as shown in Figure 8. Shaikh et al. synthesized TiO2–RGO nanocomposites with uniformly dispersed 4–9 nm diameter TiO2 nanoparticles by a one-step solvothermal technique and evaluated its photocatalytic activity towards reduction of Cr(VI). The use of 1 wt % of RGO at acidic pH

• photoreduction of Cr(VI) under sunlight illumination [143]. Its enhanced photoreduction capacity over TiO2 nanosheets, P25 and CD–P25 was attributed to the better charge transfer as well as higher light absorption properties of CDs. The in situ formation of H2O2 promotes the photoactivity to a great extent

Electrodeposition of reduced graphene oxide with chitosan based on the coordination deposition method

• Mingyang Liu,
• Yanjun Chen,
• Chaoran Qin,
• Zheng Zhang,
• Shuai Ma,
• Xiuru Cai,
• Xueqian Li and
• Yifeng Wang

Beilstein J. Nanotechnol. 2018, 9, 1200–1210, doi:10.3762/bjnano.9.111

• et al. reported that after electrodeposition in the graphene oxide/chitosan solution, graphene nanosheets could be electrodeposited onto the glassy carbon electrode through the electrochemical reduction of graphene oxide [24]. However, it has been reported that the electrochemically reduced graphene

Electrostatic force spectroscopy revealing the degree of reduction of individual graphene oxide sheets

• Yue Shen,
• Ying Wang,
• Yuan Zhou,
• Chunxi Hai,
• Jun Hu and
• Yi Zhang

Beilstein J. Nanotechnol. 2018, 9, 1146–1155, doi:10.3762/bjnano.9.106

• increment in the visible region as well as the disappearance of the broad shoulder at 300 nm for samples 1–5 compared to sample 0 imply the removal of the oxygen-containing groups and the restoration of the π-conjugation network within the graphene nanosheets [11][12]. Nevertheless, except for the

Room-temperature single-photon emitters in titanium dioxide optical defects

• Kelvin Chung,
• Yu H. Leung,
• Chap H. To,
• Aleksandra B. Djurišić and
• Snjezana Tomljenovic-Hanic

Beilstein J. Nanotechnol. 2018, 9, 1085–1094, doi:10.3762/bjnano.9.100

• ]. The defects are responsible for visible photoluminescence (PL) in TiO2 and have been observed in thin films [39][40][41], nanocrystals/nanoparticles [42][43][44][45][46][47], nanorods [48], nanotubes [49][50][51], nanosheets [52], nanoribbons [53] and fibres [54]. In material sciences, the PL spectrum