Quantification of lead through rod-shaped silver-doped zinc oxide nanoparticles using an electrochemical approach

• Ravinder Lamba,
• Gaurav Bhanjana,
• Neeraj Dilbaghi,
• Vivek Gupta and
• Sandeep Kumar

Beilstein J. Nanotechnol. 2025, 16, 422–434, doi:10.3762/bjnano.16.33

• uncomplicated method for producing Ag@ZnO NRs. These fabricated Ag@ZnO NRs play an effective role as an electron mediator in the development of lead chemical sensors which are both highly sensitive and robust in nature. Based on our current understanding, the lead sensor we developed exhibits the most notable

• of lead chemical sensors. The significant rise in peak height is indicative of a faster electron-transfer event because it causes a sharper, more defined peak. Furthermore, the absence of a cathodic current in the reverse cycle indicates the irreversibility of the electrochemical response that was

Green synthesis of carbon dot structures from Rheum Ribes and Schottky diode fabrication

• Muhammed Taha Durmus and
• Ebru Bozkurt

Beilstein J. Nanotechnol. 2024, 15, 1369–1375, doi:10.3762/bjnano.15.110

• range of uses in the fields of electrocatalysis, bioimaging, chemical sensors, biosensors, nanomedicine, biomolecule/drug release, light-emitting diodes, and photocatalysts. They also have promising applications in areas such as lasers and optoelectronic device applications [2][3][4][5]. CDs can be

Effect of wavelength and liquid on formation of Ag, Au, Ag/Au nanoparticles via picosecond laser ablation and SERS-based detection of DMMP

• Sree Satya Bharati Moram,
• Chandu Byram and
• Venugopal Rao Soma

Beilstein J. Nanotechnol. 2024, 15, 1054–1069, doi:10.3762/bjnano.15.86

• media [27][28][29]. The SERS substrate efficiency mainly depends on the material, size, and shape of the NPs. Recent terrorist activities involving explosives and chemical warfare agents highlight the urgent need for sensitive and selective chemical sensors. These sensors must be using low power and be

Functional fibrillar interfaces: Biological hair as inspiration across scales

• Guillermo J. Amador,
• Brett Klaassen van Oorschot,
• Caiying Liao,
• Jianing Wu and
• Da Wei

Beilstein J. Nanotechnol. 2024, 15, 664–677, doi:10.3762/bjnano.15.55

• [148]. Based on this knowledge, bio-inspired, fibrillar chemical sensors have been developed [149][150]. Furthermore, insects can utilize hairs to sense atmospheric carbon dioxide [151][152]. The human scalp follicles also possess an olfactory perception and can even stimulate hair growth upon exposure

A chemiresistive sensor array based on polyaniline nanocomposites and machine learning classification

• Jiri Kroutil,
• Alexandr Laposa,
• Ali Ahmad,
• Jan Voves,
• Vojtech Povolny,
• Ladislav Klimsa,
• Marina Davydova and
• Miroslav Husak

Beilstein J. Nanotechnol. 2022, 13, 411–423, doi:10.3762/bjnano.13.34

• oxides, and various volatile organic compounds, is crucial in automotive, defense, aviation, chemical, medicine, and food industries [1][2]. Research on chemical sensors is currently focused on the fabrication of multisensor arrays for enhanced detection and identification of various chemical compounds

A photonic crystal material for the online detection of nonpolar hydrocarbon vapors

• Evgenii S. Bolshakov,
• Aleksander V. Ivanov,
• Andrei A. Kozlov,
• Anton S. Aksenov,
• Elena V. Isanbaeva,
• Sergei E. Kushnir,
• Aleksei D. Yapryntsev,
• Aleksander E. Baranchikov and
• Yury A. Zolotov

Beilstein J. Nanotechnol. 2022, 13, 127–136, doi:10.3762/bjnano.13.9

• ) used for chemical sensors can be divided into three groups depending upon their structure, that is, one-dimensional (1D), two-dimensional (2D), and three-dimensional (3D) [1][2][3][4][5][6][7][8][9][10]. 2D and 3D structures used as chemical sensors are studied in most projects. 2D structures consist

Paper-based triboelectric nanogenerators and their applications: a review

• Jing Han,
• Nuo Xu,
• Yuchen Liang,
• Mei Ding,
• Junyi Zhai,
• Qijun Sun and
• Zhong Lin Wang

Beilstein J. Nanotechnol. 2021, 12, 151–171, doi:10.3762/bjnano.12.12

• pattering process results in porous MCG structures (with pore sizes ranging from hundreds of nanometers to several microns), which can be used in various applications, such as mechanical energy harvesting devices, chemical sensors, and electrochemical supercapacitors. Screen printing is a facile, efficient

Wafer-level integration of self-aligned high aspect ratio silicon 3D structures using the MACE method with Au, Pd, Pt, Cu, and Ir

• Mathias Franz,
• Romy Junghans,
• Paul Schmitt,
• Adriana Szeghalmi and
• Stefan E. Schulz

Beilstein J. Nanotechnol. 2020, 11, 1439–1449, doi:10.3762/bjnano.11.128

• platform and can be adapted to detect biomolecules [9]. Silicon nanowires are used as template for cancer sensors. The nanowires are implemented as gate in integrated sensing FETs [10][11]. A wide range of chemical sensors and biosensors benefit from porous silicon structures [12]. All these presented

Revealing the local crystallinity of single silicon core–shell nanowires using tip-enhanced Raman spectroscopy

• Marius van den Berg,
• Ardeshir Moeinian,
• Arne Kobald,
• Yu-Ting Chen,
• Anke Horneber,
• Steffen Strehle,
• Alfred J. Meixner and
• Dai Zhang

Beilstein J. Nanotechnol. 2020, 11, 1147–1156, doi:10.3762/bjnano.11.99

• serving as multifunctional platforms for field-effect transistors [4][5][6], photovoltaic devices [7][8][9][10] and miniaturized chemical sensors [5][11][12]. A key element for many of those devices are high-quality nanometer-scale semiconductor junctions, such as pn-junctions that ensure the intended

Review of advanced sensor devices employing nanoarchitectonics concepts

• Katsuhiko Ariga,
• Tatsuyuki Makita,
• Masato Ito,
• Taizo Mori,
• Shun Watanabe and
• Jun Takeya

Beilstein J. Nanotechnol. 2019, 10, 2014–2030, doi:10.3762/bjnano.10.198

• . Sensors for chemical substances Mainly due to the high demand to solve environmental problems, vapor sensors and gas-phase chemical sensors have been actively researched. Tang and co-workers accomplished drastic improvement of sensitivity of H2S gas detection by mechanical deformation of ultrathin single

Rapid, ultraviolet-induced, reversibly switchable wettability of superhydrophobic/superhydrophilic surfaces

• Yunlu Pan,
• Wenting Kong,
• Bharat Bhushan and
• Xuezeng Zhao

Beilstein J. Nanotechnol. 2019, 10, 866–873, doi:10.3762/bjnano.10.87

• solid surfaces governed by surface chemistry and surface topography [1][2] and has found significant applications in various fields [3][4][5][6][7][8]. Controllable wettability that can be enabled through external stimuli, such as illumination, electric fields or heating, can be applied in chemical

• sensors, smart filtration and separation, and microfluidic devices [9][10][11][12]. While controlling wettability through heating is mostly limited to toxic materials, such surfaces cannot be applied in human science [13][14]. Although the application of an electric field is an efficient method to achieve

Electrospun one-dimensional nanostructures: a new horizon for gas sensing materials

• Muhammad Imran,
• Nunzio Motta and
• Mahnaz Shafiei

Beilstein J. Nanotechnol. 2018, 9, 2128–2170, doi:10.3762/bjnano.9.202

• and reversibility, are strongly influenced by the properties of the sensing materials [12][13][14]. Chemical sensors are widely used for biomedical, healthcare, security and environmental applications. Table S1 in Supporting Information File 1 presents a summary of the different types of electrospun

• , and CO. ZnO hollow NFs functionalized by rare earth metals, such as Ce, show enhanced acetone sensing [193]. The Ce ion occurs either as Ce4+ and Ce3+ which is effective for improving the performance of chemical sensors. The surface morphology of Ce-doped ZnO HNFs is concave–convex and porous with an

Nonlinear effect of carrier drift on the performance of an n-type ZnO nanowire nanogenerator by coupling piezoelectric effect and semiconduction

• Yuxing Liang,
• Shuaiqi Fan,
• Xuedong Chen and
• Yuantai Hu

Beilstein J. Nanotechnol. 2018, 9, 1917–1925, doi:10.3762/bjnano.9.183

• piezoelectric semiconductors can be used to develop many new microelectronic devices with modern functions, for example piezoelectric field-effect transistors [6][7][8][9][10][11], piezoelectric charge-coupled devices [12][13][14][15], piezoelectric chemical sensors [16][17], and nanogenerators made of

Cathodoluminescence as a probe of the optical properties of resonant apertures in a metallic film

• Kalpana Singh,
• Evgeniy Panchenko,
• Babak Nasr,
• Amelia Liu,
• Lukas Wesemann,
• Timothy J. Davis and
• Ann Roberts

Beilstein J. Nanotechnol. 2018, 9, 1491–1500, doi:10.3762/bjnano.9.140

• apertures. The high sensitivity of the resonant modes of the apertures to the refractive index of the surrounding media underpins significant potential in realizing highly efficient ultra-compact biological and chemical sensors [26][27][28][29][30][31], plasmonic electrochemical sensors [32] and as SERS

Synthesis of metal-fluoride nanoparticles supported on thermally reduced graphite oxide

• Alexa Schmitz,
• Kai Schütte,
• Vesko Ilievski,
• Juri Barthel,
• Laura Burk,
• Rolf Mülhaupt,
• Junpei Yue,
• Bernd Smarsly and
• Christoph Janiak

Beilstein J. Nanotechnol. 2017, 8, 2474–2483, doi:10.3762/bjnano.8.247

• important technical applications [15][16][17][18][19][20][21][22]. They can be used as composite materials [23][24], in chemical sensors [25], electrodes for fuel cells [26][27][28], for catalysis [29][30][31][32] or for hydrogen storage [33]. Because of their high ionic charge, polarity and dielectric

Substrate and Mg doping effects in GaAs nanowires

• Perumal Kannappan,
• Nabiha Ben Sedrine,
• Jennifer P. Teixeira,
• Maria R. Soares,
• Bruno P. Falcão,
• Maria R. Correia,
• Nestor Cifuentes,
• Emilson R. Viana,
• Marcus V. B. Moreira,
• Geraldo M. Ribeiro,
• Alfredo G. de Oliveira,
• Juan C. González and
• Joaquim P. Leitão

Beilstein J. Nanotechnol. 2017, 8, 2126–2138, doi:10.3762/bjnano.8.212

• ; photoluminescence; Introduction In recent years, semiconductor nanowires have attracted a great deal of interest as building blocks for a new generation of electronic and optoelectronic devices, namely, batteries, biological and chemical sensors, thermoelectric devices, laser diodes, photo detectors, integrated

Functional materials for environmental sensors and energy systems

• Michele Penza,
• Anita Lloyd Spetz,
• Albert Romano-Rodriguez and
• Meyya Meyyappan

Beilstein J. Nanotechnol. 2017, 8, 2015–2016, doi:10.3762/bjnano.8.201

• Linkoping, Sweden Department of Electronics, University of Barcelona, 08028 Barcelona, Spain, Ames Research Center, NASA, 94035 Moffett Field, CA, USA 10.3762/bjnano.8.201 Keywords: air-quality monitoring; chemical sensors; energy systems; functional materials; sensor materials; Advanced materials and

• original research presented as invited, oral and poster presentations at the 5-day Symposium X [2] at the European Materials Research Society (E-MRS) Spring Meeting 2016, May 2–6, in Lille, France, which was devoted to advanced functional materials for chemical sensors and energy systems. Nanotechnology

• includes practical applications such as geo-tagged databases that are collected by networked, stationary or mobile smart devices to address new sensing concepts for air-quality monitoring as well as mapping techniques of gas molecules and particulate matter [3][4][5]. These solid-state chemical sensors

Metal oxide nanostructures: preparation, characterization and functional applications as chemical sensors

• Dario Zappa,
• Angela Bertuna,
• Elisabetta Comini,
• Navpreet Kaur,
• Nicola Poli,
• Veronica Sberveglieri and
• Giorgio Sberveglieri

Beilstein J. Nanotechnol. 2017, 8, 1205–1217, doi:10.3762/bjnano.8.122

• nanowires have been integrated into an electronic nose and successfully applied to discriminate between drinking and contaminated water. Keywords: chemical sensors; electronic nose; metal oxides; nanowires; Introduction Nanotechnology is the base for improving knowledge about materials and phenomena at

• the nanometric scale. This is crucial for the development of any device. Because sensors are able to acquire chemical information from the surroundings in real time, they are attracting a lot of interest and, therefore, they are going to have an increasing impact on everyday life. Chemical sensors may

• , since the ingestion of food not properly stored or treated is one of the most frequent reason of hospitalization [1]. Chemical sensors may play a pivotal role in all these applications. Metal oxides were the first to be commercialized as conductometric chemical sensors in form of thick films, and they

CVD transfer-free graphene for sensing applications

• Chiara Schiattarella,
• Sten Vollebregt,
• Tiziana Polichetti,
• Brigida Alfano,
• Ettore Massera,
• Maria Lucia Miglietta,
• Girolamo Di Francia and
• Pasqualina Maria Sarro

Beilstein J. Nanotechnol. 2017, 8, 1015–1022, doi:10.3762/bjnano.8.102

• mobility and low electrical noise, are all precisely concentrated in this material. As it has been reported by Varghese et al. in a recent review on chemical sensors, the interest of the scientific community towards graphene for sensing applications is continuously growing, as testified by the increasing

Fiber optic sensors based on hybrid phenyl-silica xerogel films to detect n-hexane: determination of the isosteric enthalpy of adsorption

• Jesús C. Echeverría,
• Ignacio Calleja,
• Paula Moriones and
• Julián J. Garrido

Beilstein J. Nanotechnol. 2017, 8, 475–484, doi:10.3762/bjnano.8.51

• pressure and condensation of the adsorbate on the mesopores was dominant at higher relative pressure. Keywords: fiber optic sensors; isosteric enthalpy of adsorption; n-hexane; phenyl-silica; xerogel films; Introduction Fiber optic chemical sensors (FOCSs) that employ sensitive films for the detection of

Advances in the fabrication of graphene transistors on flexible substrates

• Gabriele Fisichella,
• Stella Lo Verso,
• Silvestra Di Marco,
• Vincenzo Vinciguerra,
• Emanuela Schilirò,
• Salvatore Di Franco,
• Raffaella Lo Nigro,
• Fabrizio Roccaforte,
• Amaia Zurutuza,
• Alba Centeno,
• Sebastiano Ravesi and
• Filippo Giannazzo

Beilstein J. Nanotechnol. 2017, 8, 467–474, doi:10.3762/bjnano.8.50

• (Gr-FETs) can be used for flexible high frequency (RF) electronics or for high sensitivity chemical sensors. Miniaturized and flexible Gr-FET sensors would be highly advantageous for current sensors technology for in vivo and in situ applications. In this paper, we report a wafer-scale processing

Surface-enhanced Raman scattering of self-assembled thiol monolayers and supported lipid membranes on thin anodic porous alumina

• Marco Salerno,
• Amirreza Shayganpour,
• Barbara Salis and
• Silvia Dante

Beilstein J. Nanotechnol. 2017, 8, 74–81, doi:10.3762/bjnano.8.8

• surface roughness [3][4], the latter of which can play an important role in the adhesion and proliferation of cells [5][6][7]. The self-ordered nano-structured APA, also demonstrated recently as a possible nanolithographic mask [8][9] and for chemical sensors and biosensors [10], after coating with noble

A composite structure based on reduced graphene oxide and metal oxide nanomaterials for chemical sensors

• Vardan Galstyan,
• Elisabetta Comini,
• Iskandar Kholmanov,
• Andrea Ponzoni,
• Veronica Sberveglieri,
• Nicola Poli,
• Guido Faglia and
• Giorgio Sberveglieri

Beilstein J. Nanotechnol. 2016, 7, 1421–1427, doi:10.3762/bjnano.7.133

• monitoring of environmental pollutants and for the application of breath tests in assessment of exposure to volatile organic compounds. Keywords: chemical sensors; reduced graphene oxide (RGO); volatile organic compounds; zinc oxide (ZnO); Introduction Hazard analysis of critical control point (HACCP

• ][6]. During the last decades, different types of sensors were fabricated for environmental and health monitoring. Among the different detection systems, chemical sensors based on metal oxide nanomaterials are highly demanded because of their high sensitivity, small size, low cost and low power

• nanofibers loaded with reduced graphene oxide [23]. These recent studies indicate that the combination of graphene and its modified structures with ZnO nanomaterials may open new perspectives for the fabrication of ZnO-based chemical sensors. In this paper, we describe a hybrid nanomaterial consisting of RGO

Ammonia gas sensors based on In₂O₃/PANI hetero-nanofibers operating at room temperature

• Qingxin Nie,
• Zengyuan Pang,
• Hangyi Lu,
• Yibing Cai and
• Qufu Wei

Beilstein J. Nanotechnol. 2016, 7, 1312–1321, doi:10.3762/bjnano.7.122

• final response reached 47.42, which was about 89% of the first test. Hence, the In2O3/PANI-2 nanofibers sensor showed good repeatability and reversibility. Gas sensing mechanism It is well known that the chemical sensors are composed of two parts, an active part and a transduction part, whose function

Electrochemical behavior of polypyrrol/AuNP composites deposited by different electrochemical methods: sensing properties towards catechol

• Celia García-Hernández,
• Cristina García-Cabezón,
• Cristina Medina-Plaza,
• Fernando Martín-Pedrosa,
• Yolanda Blanco,
• José Antonio de Saja and
• María Luz Rodríguez-Méndez

Beilstein J. Nanotechnol. 2015, 6, 2052–2061, doi:10.3762/bjnano.6.209

• this reason, they have been widely used as chemical sensors for the detection of a variety of substances. The structure and sensing properties of the Ppy films are considerably influenced by the electrochemical method used for the polymerization (potentiostatic, galvanostatic or potentiodynamic), by