Development of a mucoadhesive drug delivery system and its interaction with gastric cells

• Ahmet Baki Sahin,
• Serdar Karakurt and
• Deniz Sezlev Bilecen

Beilstein J. Nanotechnol. 2025, 16, 371–384, doi:10.3762/bjnano.16.28

• polymer enables drug release by diffusion [21]. Eudragit RS30D is the 30% aqueous dispersion of Eudragit RS100, which is promptly used as coating material [22] or within formulations of drug delivery systems with sustained release characteristics [23]. Although the mucoadhesion of this polymer is known

Enhancing mechanical properties of chitosan/PVA electrospun nanofibers: a comprehensive review

• Nur Areisman Mohd Salleh,
• Amalina Muhammad Afifi,
• Fathiah Mohamed Zuki and
• Hanna Sofia SalehHudin

Beilstein J. Nanotechnol. 2025, 16, 286–307, doi:10.3762/bjnano.16.22

• et al. [110] coated electrospun PVA fibers with chitosan solution and reported improved tensile properties due to interfiber bonds created by the chitosan coating. Material modifications In recent research, electrospun chitosan/PVA nanofibers have been mixed with silk fibers, resulting in

Fabrication of nanocrystal forms of ᴅ-cycloserine and their application for transdermal and enteric drug delivery systems

• Hsuan-Ang Tsai,
• Tsai-Miao Shih,
• Theodore Tsai,
• Jhe-Wei Hu,
• Yi-An Lai,
• Jui-Fu Hsiao and
• Guochuan Emil Tsai

Beilstein J. Nanotechnol. 2024, 15, 465–474, doi:10.3762/bjnano.15.42

• for enteric solid dosage coating and is used in this work for DCS enteric administration test. An amount of 5.66 g of Kollicoat MAE 30 DP was mixed with 0.34 g of propylene glycol for the enteric coating material, which was evenly brushed on the surface of the size 9 empty porcine hard gelatin

Investigating structural and electronic properties of neutral zinc clusters: a G₀W₀ and G₀W₀Г₀⁽¹⁾ benchmark

• Sunila Bakhsh,
• Muhammad Khalid,
• Sameen Aslam,
• Muhammad Sohail,
• Muhammad Aamir Iqbal,
• Mujtaba Ikram and
• Kareem Morsy

Beilstein J. Nanotechnol. 2024, 15, 310–316, doi:10.3762/bjnano.15.28

• ability to lose electrons quickly to oxygen makes it unsuitable as a coating material. Zinc exhibits a s2 closed-shell structure, and its dimer forms through van der Waal (vdW) forces [4]. As the cluster size increases, the properties of the clusters change significantly, and the effect of vdW forces

Vinorelbine-loaded multifunctional magnetic nanoparticles as anticancer drug delivery systems: synthesis, characterization, and in vitro release study

• Zeynep Özcan and
• Afife Binnaz Hazar Yoruç

Beilstein J. Nanotechnol. 2024, 15, 256–269, doi:10.3762/bjnano.15.24

• critical aspect that warrants attention is the potential impact of different pH values on the oxidative capacity of the coating material polydopamine. This coating, formed through the polymerization of dopamine, plays a pivotal role in the drug delivery system. The variations in pH values can potentially

• affinities for the drug molecule at different pH values. Hence, the observed differences in drug release profiles between pH 5.5 and 7.4 can be plausibly attributed to these pH-dependent interactions [57]. Factors such as pH value, coating material properties, coating thickness, and drug binding capacity

Determination of the radii of coated and uncoated silicon AFM sharp tips using a height calibration standard grating and a nonlinear regression function

• Perawat Boonpuek and
• Jonathan R. Felts

Beilstein J. Nanotechnol. 2023, 14, 1200–1207, doi:10.3762/bjnano.14.99

• silicon tip (HQ:CSC17/No Al, nominal radius < 8 nm for regular force contact AFM; Figure 1c), all supplied by MikroMasch. The full cone angle for all tips is 40° as given by MikroMasch [9]. The tip end is a hemisphere with specific radius. For the coated tips, the tip radius includes the coating material

Nanoarchitectonics of photothermal materials to enhance the sensitivity of lateral flow assays

• Elangovan Sarathkumar,
• Rajasekharan S. Anjana and
• Ramapurath S. Jayasree

Beilstein J. Nanotechnol. 2023, 14, 988–1003, doi:10.3762/bjnano.14.82

• photothermal conversion efficiency than gold nanorods. However, only a limited number of studies have investigated the influence of size, shape, and coating material on the photothermal properties of SPIONs. Chu et al. investigated the PCE of three distinctly shaped (spheres, hexagons, and wires) iron oxide

Orally administered docetaxel-loaded chitosan-decorated cationic PLGA nanoparticles for intestinal tumors: formulation, comprehensive in vitro characterization, and release kinetics

• Sedat Ünal,
• Osman Doğan and
• Yeşim Aktaş

Beilstein J. Nanotechnol. 2022, 13, 1393–1407, doi:10.3762/bjnano.13.115

• nanoparticles for experimental studies and dose calculations [45]. EE and DL of DCX-loaded nanoparticle formulations are documented in Table 2. The EE values of DCX-PLGA and CS/DCX-PLGA were 46.18% and 69.04%, respectively (p < 0.05). CS as a coating material led to an increase in encapsulation efficiency of

• [15]. Manca et al. stated that using CS as coating material significantly increased the mucoadhesive activity of the formulations by positively changing the surface charge of the NPs [54]. Cell culture models are not precise enough to evaluate the interaction between NPs and mucus layer. Since the

Biomimetic chitosan with biocomposite nanomaterials for bone tissue repair and regeneration

• Se-Kwon Kim,
• Sesha Subramanian Murugan,
• Pandurang Appana Dalavi,
• Sebanti Gupta,
• Sukumaran Anil,
• Gi Hun Seong and
• Jayachandran Venkatesan

Beilstein J. Nanotechnol. 2022, 13, 1051–1067, doi:10.3762/bjnano.13.92

• and also significant antimicrobial activity [112]. The hydroxyapatite was coated onto titanium by using an induction plasma-spray coating approach. The hydroxyapatite was then buffed with silver and silica. In the SBF solution, the release of acemannan from the coating material was also evaluated

Effect of different silica coatings on the toxicity of upconversion nanoparticles on RAW 264.7 macrophage cells

• Cynthia Kembuan,
• Helena Oliveira and
• Christina Graf

Beilstein J. Nanotechnol. 2021, 12, 35–48, doi:10.3762/bjnano.12.3

• as in the present work [76]. These results suggest that silica is a suitable coating material to reduce cytotoxicity. The effect of UCNPs on RAW 246.7 cells has not been studied so far. Conclusion In bioimaging applications using UCNPs, it is crucial to keep the particles intact (i.e., without

Structural and electronic properties of SnO₂ doped with non-metal elements

• Jianyuan Yu,
• Yingeng Wang,
• Yan Huang,
• Xiuwen Wang,
• Jing Guo,
• Jingkai Yang and
• Hongli Zhao

Beilstein J. Nanotechnol. 2020, 11, 1321–1328, doi:10.3762/bjnano.11.116

• replacement doping. S-doping forms p-type semiconductors, and F-doping forms n-type semiconductors. The optical analysis results revealed that F-doped SnO2 possesses the highest reflectivity in the infrared region, and is most suitable as a low-emissivity coating material. Schematic diagram of the structure

Applications of superparamagnetic iron oxide nanoparticles in drug and therapeutic delivery, and biotechnological advancements

• Maria Suciu,
• Corina M. Ionescu,
• Alexandra Ciorita,
• Septimiu C. Tripon,
• Dragos Nica,
• Hani Al-Salami and
• Lucian Barbu-Tudoran

Beilstein J. Nanotechnol. 2020, 11, 1092–1109, doi:10.3762/bjnano.11.94

• [30], but the coating material can be damaging to the sensitive balance of the cell metabolism, if not even toxic [55]. Also, iron is believed to be responsible for liver cancer (iron-induced carcinogenesis) and some cell mechanisms seem to support this possibility (including the generation of

Cytotoxicity of doxorubicin-conjugated poly[N-(2-hydroxypropyl)methacrylamide]-modified γ-Fe₂O₃ nanoparticles towards human tumor cells

• Zdeněk Plichta,
• Yulia Kozak,
• Rostyslav Panchuk,
• Viktoria Sokolova,
• Matthias Epple,
• Lesya Kobylinska,
• Pavla Jendelová and
• Daniel Horák

Beilstein J. Nanotechnol. 2018, 9, 2533–2545, doi:10.3762/bjnano.9.236

• @PHPMA (Dh = 165 nm; PI = 0.22) was substantially larger than that of γ-Fe2O3 (90 nm). This is due to the fact that the hydrodynamic diameter gives information of the γ-Fe2O3 core along with coating material and the solvent layer attached to the particles, which undergo Brownian motion. Moreover

Vapor-based polymers: from films to nanostructures

• Meike Koenig and
• Joerg Lahann

Beilstein J. Nanotechnol. 2017, 8, 2219–2220, doi:10.3762/bjnano.8.221

• from the coating material, which, in turn, often results in superior biocompatibility [10]. This, together with the conformal character of the coating, is of importance in a novel antibacterial catheter introduced by Franz et al. [11] Here, poly(p-xylylene), which is deposited via chemical vapor

Bi-layer sandwich film for antibacterial catheters

• Gerhard Franz,
• Florian Schamberger,
• Hamideh Heidari Zare,
• Sara Felicitas Bröskamp and
• Dieter Jocham

Beilstein J. Nanotechnol. 2017, 8, 1982–2001, doi:10.3762/bjnano.8.199

• of both the layers should be similar (Figure 8). Summary: To coat a catheter with an antibacterial layer, several obstacles have to be overcome: the need for biocompatible coating material, an antibacterial agent that must be effective against several bacterial strains that have developed resistances

α-Silicene as oxidation-resistant ultra-thin coating material

• Ali Kandemir,
• Fadil Iyikanat,
• Cihan Bacaksiz and
• Hasan Sahin

Beilstein J. Nanotechnol. 2017, 8, 1808–1814, doi:10.3762/bjnano.8.182

• in the presence of absorbed O atom. It appears that single-layer silicene is a quite promising material for ultra-thin oxidation-protective coating applications. Keywords: coating material; density functional theory; oxidization; silicene, silver; Introduction Surface protection against degradation

• ]. Kirkland et al. investigated the electrochemical response of graphene-coated metal surfaces and found that graphene causes reduction in the corrosion rate [8]. In addition, Topsakal et al. showed that graphene is a suitable coating material to protect surfaces from oxidation by performing DFT-based

• calculations [9]. Bulk forms of transition-metal dichalcogenides (TMDs) are well-known coating materials, and the respective 2D TMDs can be used as surface protection. In addition, MoS2 is one of the most widely used lubricant coating material [10]. Theoretical and experimental studies have demonstrated that

Development of a nitrogen-doped 2D material for tribological applications in the boundary-lubrication regime

• Shende Rashmi Chandrabhan,
• Velayudhanpillai Jayan,
• Somendra Singh Parihar and
• Sundara Ramaprabhu

Beilstein J. Nanotechnol. 2017, 8, 1476–1483, doi:10.3762/bjnano.8.147

• Coating Material Laboratory, NTPC Energy Technology Research Alliance (NETRA), NTPC Ltd, E3, Ecotech II, Greater Noida 201306, Uttar Pradesh, India 10.3762/bjnano.8.147 Abstract The present paper describes a facile synthesis method for nitrogen-doped reduced graphene oxide (N-rGO) and the application of

Development of polycationic amphiphilic cyclodextrin nanoparticles for anticancer drug delivery

• Gamze Varan,
• Juan M. Benito,
• Carmen Ortiz Mellet and
• Erem Bilensoy

Beilstein J. Nanotechnol. 2017, 8, 1457–1468, doi:10.3762/bjnano.8.145

• bioactive cationic polysaccharide derived from deacetylation of chitin and is well-characterized for its mucosal penetration enhancer property and apoptotic activity against cancer cells [42]. To alter the surface charge of nanomaterials, chitosan can be used as coating material in nanoparticles [43][44

Analysis and modification of defective surface aggregates on PCDTBT:PCBM solar cell blends using combined Kelvin probe, conductive and bimodal atomic force microscopy

• Hanaul Noh,
• Alfredo J. Diaz and
• Santiago D. Solares

Beilstein J. Nanotechnol. 2017, 8, 579–589, doi:10.3762/bjnano.8.62

• and holes, respectively. The dominant charge carriers in C-AFM could be additionally optimized by choosing a more suitable tip coating material [31]. In addition to the qualitative energy-diagram analysis, we calculated the quantum tunneling transmission coefficient (T) of charge carriers through the

Nano- and microstructured materials for in vitro studies of the physiology of vascular cells

• Alexandra M. Greiner,
• Adria Sales,
• Hao Chen,
• Sarah A. Biela,
• Dieter Kaufmann and
• Ralf Kemkemer

Beilstein J. Nanotechnol. 2016, 7, 1620–1641, doi:10.3762/bjnano.7.155

• hydrogel and thus its stiffness can be varied. Their elasticity can be tuned over a wide range from below 1 kPa to above 100 MPa [79]. An additional feature of PEG hydrogels is their low protein absorption. This characteristic makes them often to the coating material of choice when surfaces need to have

Synthesis of boron nitride nanotubes and their applications

• Saban Kalay,
• Zehra Yilmaz,
• Ozlem Sen,
• Melis Emanet,
• Emine Kazanc and
• Mustafa Çulha

Beilstein J. Nanotechnol. 2015, 6, 84–102, doi:10.3762/bjnano.6.9

• misleading results since toxicity is mostly defined by the coating material. In addition, there is not much information about the fate of these materials in biological systems and the environment, such as their degradation after their release. SEM images of BNNTs grown based on a CVD method. (a) Experimental

Localized surface plasmon resonances in nanostructures to enhance nonlinear vibrational spectroscopies: towards an astonishing molecular sensitivity

• Dan Lis and
• Francesca Cecchet

Beilstein J. Nanotechnol. 2014, 5, 2275–2292, doi:10.3762/bjnano.5.237

• whether silver or gold was used as coating material. This latter fact was rather surprising since the SPR frequencies are well distinct between the two metals. However, the authors explained that, irrespective of the metal, the strong SFG enhancement was mainly due to the electromagnetic field increase at