Heat-induced transformation of nickel-coated polycrystalline diamond film studied in situ by XPS and NEXAFS

• Olga V. Sedelnikova,
• Yuliya V. Fedoseeva,
• Dmitriy V. Gorodetskiy,
• Yuri N. Palyanov,
• Elena V. Shlyakhova,
• Eugene A. Maksimovskiy,
• Anna A. Makarova,
• Lyubov G. Bulusheva and
• Aleksandr V. Okotrub

Beilstein J. Nanotechnol. 2025, 16, 887–898, doi:10.3762/bjnano.16.67

• diamond surfaces is initiated at 750 °C. A temperature of about 1500 °C is needed for the formation of extended graphene-like layers, and temperatures higher than 2000 °C are required for the complete conversion of the diamond (111) surface to graphitic layers [10][11]. Thermal stability of diamond

Serum heat inactivation diminishes ApoE-mediated uptake of D-Lin-MC3-DMA lipid nanoparticles

• Demian van Straten,
• Luuk van de Schepop,
• Rowan Frunt,
• Pieter Vader and
• Raymond M. Schiffelers

Beilstein J. Nanotechnol. 2025, 16, 740–748, doi:10.3762/bjnano.16.57

• ratio of both luciferase activities was used as a read out for LNP-mediated knockdown. Protein thermal stability To determine the thermal stability of ApoE, a solution of ApoE or BSA at 170 µg/mL in PBS was incubated at room temperature, 37 °C, 56 °C or 75 °C shaking at 300 rpm for 30 min. Subsequently

• , the solutions were transferred to a black 96 well plate (50 µL/well) after which an equal volume of 20 µM ThT in PBS was added. After 5 min at rt, the fluorescence was measured (excitation: 450 nm, emission: 505 nm) using a Spectramax iD3 plate reader (Molecular Devices). Thermal stability of ApoE in

Polyurethane/silk fibroin-based electrospun membranes for wound healing and skin substitute applications

• Iqra Zainab,
• Zohra Naseem,
• Syeda Rubab Batool,
• Muhammad Waqas,
• Ahsan Nazir and
• Muhammad Anwaar Nazeer

Beilstein J. Nanotechnol. 2025, 16, 591–612, doi:10.3762/bjnano.16.46

• . developed a micro–nanofiber dressing by electrospinning a blend of SF, chitosan, and halloysite nanotubes (HNTs) loaded with the antibacterial agent chlorhexidine digluconate (CHD). The addition of HNTs considerably altered the nanofiber structure, and increased the material’s thermal stability and

Water in nanoporous hexagonal boron nitride nanosheets: a first-principles study

• Juliana A. Gonçalves,
• Ronaldo J. C. Batista and
• Marcia C. Barbosa

Beilstein J. Nanotechnol. 2025, 16, 510–519, doi:10.3762/bjnano.16.39

• boron nitride (h-BN) [19]. Among these materials, h-BN stands out because of its properties, which are similar to those of graphene. It is composed of alternating boron and nitrogen atoms arranged in a honeycomb-like crystalline structure, characterized by high thermal stability, low dielectric constant

N₂⁺-implantation-induced tailoring of structural, morphological, optical, and electrical characteristics of sputtered molybdenum thin films

• Usha Rani,
• Kafi Devi,
• Divya Gupta and
• Sanjeev Aggarwal

Beilstein J. Nanotechnol. 2025, 16, 495–509, doi:10.3762/bjnano.16.38

• remarkable thermal stability, high melting point, and chemical inertness. In the present study, Mo thin films of different thicknesses (150, 200, 250, and 300 nm) have been deposited on Si(100) substrates via radio frequency sputtering in an argon atmosphere at room temperature. Some of these films have been

• range of applications [23][24][25][26][27][28]. Kim et al. [23] examined the impact of a 3 × 1017 N2+·cm−2 ion fluence on the structural characteristics, surface morphology, and thermal stability of Mo thin films. The internal stress of these films transitioned from strongly compressive to weakly

ReactorAFM/STM – dynamic reactions on surfaces at elevated temperature and atmospheric pressure

• Tycho Roorda,
• Hamed Achour,
• Matthijs A. van Spronsen,
• Marta E. Cañas-Ventura,
• Sander B. Roobol,
• Willem Onderwaater,
• Mirthe Bergman,
• Peter van der Tuijn,
• Gertjan van Baarle,
• Johan W. Bakker,
• Joost W. M. Frenken and
• Irene M. N. Groot

Beilstein J. Nanotechnol. 2025, 16, 397–406, doi:10.3762/bjnano.16.30

• hall. The AFM/STM is contained in a high-pressure cell and sealed off from the UHV chamber by a Kalrez elastomer seal, which exhibits outstanding thermal stability and chemical resistance together with improved sealing performance in both high-pressure and high-temperature environments. Being in direct

Tailoring of physical properties of RF-sputtered ZnTe films: role of substrate temperature

• Kafi Devi,
• Usha Rani,
• Arun Kumar,
• Divya Gupta and
• Sanjeev Aggarwal

Beilstein J. Nanotechnol. 2025, 16, 333–348, doi:10.3762/bjnano.16.25

• ) compounds have numerous applications in optoelectronic devices such as light-emitting diodes [1], display devices [2], infrared detectors [3], and terahertz emitters [4]. Owing to their suitable physical properties (deposition at low temperatures and good thermal stability) and unique optical properties due

Enhancing mechanical properties of chitosan/PVA electrospun nanofibers: a comprehensive review

• Nur Areisman Mohd Salleh,
• Amalina Muhammad Afifi,
• Fathiah Mohamed Zuki and
• Hanna Sofia SalehHudin

Beilstein J. Nanotechnol. 2025, 16, 286–307, doi:10.3762/bjnano.16.22

• hydrophilicity, and low thermal stability [106][107]. The disadvantages often necessitate the combination of PVA with other materials or the application of post-processing techniques such as cross-linking or coating for performance improvement [108]. As a countermeasure, Rafieian et al. [109] proposed

Emerging strategies in the sustainable removal of antibiotics using semiconductor-based photocatalysts

• Yunus Ahmed,
• Keya Rani Dutta,
• Parul Akhtar,
• Md. Arif Hossen,
• Md. Jahangir Alam,
• Obaid A. Alharbi,
• Hamad AlMohamadi and
• Abdul Wahab Mohammad

Beilstein J. Nanotechnol. 2025, 16, 264–285, doi:10.3762/bjnano.16.21

• area, exhibits good thermal stability, is non-toxic, and can be easily morphologically modified (such as nanorods, nanosheets, and nanobelts). Because of its higher quantum efficiency, it is anticipated to demonstrate superior photocatalytic activity in comparison with TiO2, g-C3N4, and BiOBr [66

Lithium niobate on insulator: an emerging nanophotonic crystal for optimized light control

• Midhun Murali,
• Amit Banerjee and
• Tanmoy Basu

Beilstein J. Nanotechnol. 2024, 15, 1415–1426, doi:10.3762/bjnano.15.114

• , owing to its elevated refractive index and thermal stability, they are suitable for applications at high temperatures. Additionally, TiO2 exhibits a wide bandgap, making it conducive for incorporation into photonic crystals designed to operate within the ultraviolet and visible spectra. Moreover, its

Enhanced catalytic reduction through in situ synthesized gold nanoparticles embedded in glucosamine/alginate nanocomposites

• Chi-Hien Dang,
• Le-Kim-Thuy Nguyen,
• Minh-Trong Tran,
• Van-Dung Le,
• Nguyen Minh Ty,
• T. Ngoc Han Pham,
• Hieu Vu-Quang,
• Tran Thi Kim Chi,
• Tran Thi Huong Giang,
• Nguyen Thi Thanh Tu and
• Thanh-Danh Nguyen

Beilstein J. Nanotechnol. 2024, 15, 1227–1237, doi:10.3762/bjnano.15.99

• absorb moisture from the ambient environment well. The second stage revealed a slightly higher thermal stability of AuNPs@GluN/Alg (25% mass loss in the range of 210–290 °C) compared to blank GluN/Alg (31% mass loss in the range of 210–320 °C), indicating that AuNPs enhance the thermal stability of the

Bolometric IR photoresponse based on a 3D micro-nano integrated CNT architecture

• Yasameen Al-Mafrachi,
• Sandeep Yadav,
• Sascha Preu,
• Jörg J. Schneider and
• Oktay Yilmazoglu

Beilstein J. Nanotechnol. 2024, 15, 1030–1040, doi:10.3762/bjnano.15.84

• response to IR (980 nm) absorption for a 20 × 20 μm2 device. The device exhibits an exceptionally fast response time of ≈0.15 ms, coupled with a TCR of −0.91 %/K. These attributes underscore its high operating speed and responsivity, respectively. In particular, the device maintains excellent thermal

• stability and reliable operation at elevated temperatures in excess of 200 °C, extending its potential utility in challenging environmental conditions. This design allows for further device miniaturization using optical lithography techniques. Its unique properties for mass production through large-scale

• CNT thermistor wall stabilized by complementary CNT block structures. Two strategically positioned metal electrodes on the Si substrate provide lateral contacts with the vertical CNT bolometer, facilitating effective resistance measurements. Importantly, this CNT structure exhibits remarkable thermal

Atomistic insights into the morphological dynamics of gold and platinum nanoparticles: MD simulations in vacuum and aqueous media

• Evangelos Voyiatzis,
• Eugenia Valsami-Jones and
• Antreas Afantitis

Beilstein J. Nanotechnol. 2024, 15, 995–1009, doi:10.3762/bjnano.15.81

• carried out by Wen et al. [41]. Wang et al. employed ab initio MD to describe the melting of icosahedral Au nanoclusters [42]. The structural and thermal stability of high-index-faceted Pt NPs was addressed by Zeng et al. [43]. Similarly, the thermal stability of unsupported Au NPs was investigated by

Facile synthesis of Fe-based metal–organic frameworks from Fe₂O₃ nanoparticles and their application for CO₂/N₂ separation

• Van Nhieu Le,
• Hoai Duc Tran,
• Minh Tien Nguyen,
• Hai Bang Truong,
• Toan Minh Pham and
• Jinsoo Kim

Beilstein J. Nanotechnol. 2024, 15, 897–908, doi:10.3762/bjnano.15.74

• areas, high thermal stability, changeable pore system sizes, and customizable chemical surfaces [1][2][3][4][5][6]. The family tree of MOFs holds giant lineages such as Zeolitic Imidazolate Framework (ZIF), University of Olso (UiO), Material of Institute Lavoisier (MIL), Dresden University of Technology

• the wavenumber range of 4000–400 cm−1. The thermal stability of the as-prepared materials was investigated over a temperature range of 30–650 °C, employing an acceleration rate of 5 °C·min−1 in an air stream, using a Q50 thermogravimetric analyzer (TA Instruments, New Castle, USA). The chemical states

Effect of repeating hydrothermal growth processes and rapid thermal annealing on CuO thin film properties

• Monika Ozga,
• Eunika Zielony,
• Aleksandra Wierzbicka,
• Anna Wolska,
• Marcin Klepka,
• Marek Godlewski,
• Bogdan J. Kowalski and
• Bartłomiej S. Witkowski

Beilstein J. Nanotechnol. 2024, 15, 743–754, doi:10.3762/bjnano.15.62

• thin films. Consequently, it has a favorable impact on both electrical and thermal stability. Moreover, as evidenced by XRD and Raman spectroscopy analyses, the sequencing enhances the crystal quality of the films, which remain free from other copper compound phases regardless of the preparation

Exfoliation of titanium nitride using a non-thermal plasma process

• Priscila Jussiane Zambiazi,
• Dolores Ribeiro Ricci Lazar,
• Larissa Otubo,
• Rodrigo Fernando Brambilla de Souza,
• Almir Oliveira Neto and
• Cecilia Chaves Guedes-Silva

Beilstein J. Nanotechnol. 2024, 15, 631–637, doi:10.3762/bjnano.15.53

• ferromagnetic properties and demonstrated high visible-light photocatalytic activity when loaded onto titania nanotube arrays. Titanium nitride (TiN) has gained recognition as an advanced engineering material because of its outstanding chemical and thermal stability, extreme hardness, and electrical

Photocatalytic degradation of methylene blue under visible light by cobalt ferrite nanoparticles/graphene quantum dots

• Vo Chau Ngoc Anh,
• Le Thi Thanh Nhi,
• Le Thi Kim Dung,
• Dang Thi Ngoc Hoa,
• Nguyen Truong Son,
• Nguyen Thi Thao Uyen,
• Nguyen Ngoc Uyen Thu,
• Le Van Thanh Son,
• Le Trung Hieu,
• Tran Ngoc Tuyen and
• Dinh Quang Khieu

Beilstein J. Nanotechnol. 2024, 15, 475–489, doi:10.3762/bjnano.15.43

• the most important soft-magnetic ferrite materials because of its ferromagnetic properties, high magnetic and thermal stability, low conductivity, and anisotropy [6]. The controllable synthesis of spherical CF nanoparticles from corresponding salts and Arabic gum as surfactant agent using a

Heat-induced morphological changes in silver nanowires deposited on a patterned silicon substrate

• Elyad Damerchi,
• Sven Oras,
• Edgars Butanovs,
• Allar Liivlaid,
• Mikk Antsov,
• Boris Polyakov,
• Annamarija Trausa,
• Veronika Zadin,
• Andreas Kyritsakis,
• Loïc Vidal,
• Karine Mougin,
• Siim Pikker and
• Sergei Vlassov

Beilstein J. Nanotechnol. 2024, 15, 435–446, doi:10.3762/bjnano.15.39

• affect the outcome of the experiment since in any case defects caused by heating/cooling (hence, tensile compression) cycles will result in reduced thermal stability of the suspended part compared to the adhered part. Note that, as mentioned earlier, the morphology evolution in the adhered parts is

Potential of a deep eutectic solvent in silver nanoparticle fabrication for antibiotic residue detection

• Le Hong Tho,
• Bui Xuan Khuyen,
• Ngoc Xuan Dat Mai and
• Nhu Hoa Thi Tran

Beilstein J. Nanotechnol. 2024, 15, 426–434, doi:10.3762/bjnano.15.38

• thermal stability, high polarity, low vapor pressure, and low toxicity, which makes DESs promising candidates for the replacement of thousands of industrial solvents [24][25]. DESs are so versatile that they have been used for nanomaterials synthesis [26][27]. Regarding plasmonic materials, gold

Classification and application of metal-based nanoantioxidants in medicine and healthcare

• Nguyen Nhat Nam,
• Nguyen Khoi Song Tran,
• Tan Tai Nguyen,
• Nguyen Ngoc Trai,
• Nguyen Phuong Thuy,
• Hoang Dang Khoa Do,
• Nhu Hoa Thi Tran and
• Kieu The Loan Trinh

Beilstein J. Nanotechnol. 2024, 15, 396–415, doi:10.3762/bjnano.15.36

• acid was covalently grafted on the surface of SiO2 nanoparticles. SiO2 nanoparticles provided thermal stability and chemical inertness while gallic acid provided chain-breaking antioxidant properties. By grafting antioxidant compounds on SiO2 nanoparticles, the deterioration can be decreased [59

Controllable physicochemical properties of WO_x thin films grown under glancing angle

• Rupam Mandal,
• Aparajita Mandal,
• Alapan Dutta,
• Rengasamy Sivakumar,
• Sanjeev Kumar Srivastava and
• Tapobrata Som

Beilstein J. Nanotechnol. 2024, 15, 350–359, doi:10.3762/bjnano.15.31

• [2]. WOx nanostructures, exhibiting high chemical and thermal stability, and structural flexibility, have obvious relevance in areas such as photocatalysis [22], electrochromism [23], supercapacitors [24], and lithium batteries [25] and have undergone extensive investigations during the last decades

A visible-light photodetector based on heterojunctions between CuO nanoparticles and ZnO nanorods

• Doan Nhat Giang,
• Nhat Minh Nguyen,
• Duc Anh Ngo,
• Thanh Trang Tran,
• Le Thai Duy,
• Cong Khanh Tran,
• Thi Thanh Van Tran,
• Phan Phuong Ha La and
• Vinh Quang Dang

Beilstein J. Nanotechnol. 2023, 14, 1018–1027, doi:10.3762/bjnano.14.84

• because of its large exciton binding energy of 60 meV at room temperature [20], excellent chemical and thermal stability, high electron mobility, non-toxicity, low cost, and simple synthesis [21][22]. Various shapes of ZnO nanomaterials can be easily obtained by controlling synthesis conditions (e.g

Nanostructured lipid carriers containing benznidazole: physicochemical, biopharmaceutical and cellular in vitro studies

• Giuliana Muraca,
• María Esperanza Ruiz,
• Rocío C. Gambaro,
• Sebastián Scioli-Montoto,
• María Laura Sbaraglini,
• Gisel Padula,
• José Sebastián Cisneros,
• Cecilia Yamil Chain,
• Vera A. Álvarez,
• Cristián Huck-Iriart,
• Guillermo R. Castro,
• María Belén Piñero,
• Matias Ildebrando Marchetto,
• Catalina Alba Soto,
• Germán A. Islan and
• Alan Talevi

Beilstein J. Nanotechnol. 2023, 14, 804–818, doi:10.3762/bjnano.14.66

• (ζ) was measured by Doppler anemometry, and it was found to be around −13 mV. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were performed to determine the thermal stability and melting/recrystallization processes of the components after drug encapsulation. Overlaid DSC

• enthalpies (J·g−1) of the NLC dispersion and the bulk lipid, respectively. The concentration of the lipid phase was 2%. Thermogravimetric analysis Thermogravimetric analysis was performed to assess the thermal stability of BNZ, myristyl myristate, poloxamer 188, and NLC-BNZ on a TGA Q500 apparatus (TA

Humidity-dependent electrical performance of CuO nanowire networks studied by electrochemical impedance spectroscopy

• Jelena Kosmaca,
• Juris Katkevics,
• Jana Andzane,
• Raitis Sondors,
• Liga Jasulaneca,
• Raimonds Meija,
• Kiryl Niherysh,
• Yelyzaveta Rublova and
• Donats Erts

Beilstein J. Nanotechnol. 2023, 14, 683–691, doi:10.3762/bjnano.14.54

• electrode interconnects for nanoelectronics. Specifically, they can be used to transduce electric signals in nanoelectromechanical system (NEMS) switches [5], which concerns the development of nanoelectronics capable to operate in harsh environments [17]. Additionally, the excellent thermal stability of CuO

Metal-organic framework-based nanomaterials as opto-electrochemical sensors for the detection of antibiotics and hormones: A review

• Akeem Adeyemi Oladipo,
• Saba Derakhshan Oskouei and
• Mustafa Gazi

Beilstein J. Nanotechnol. 2023, 14, 631–673, doi:10.3762/bjnano.14.52

• extremely low densities (0.1–1 g·cm−3), the highest specific surface areas (165–7800 m2·g−1) currently known, tunable surface properties, good mechanical and thermal stability, intriguing and controllable morphologies, and uniform yet tunable pores that are created by the self-assembly of metal ions or