Emerging strategies in the sustainable removal of antibiotics using semiconductor-based photocatalysts

• Yunus Ahmed,
• Keya Rani Dutta,
• Parul Akhtar,
• Md. Arif Hossen,
• Md. Jahangir Alam,
• Obaid A. Alharbi,
• Hamad AlMohamadi and
• Abdul Wahab Mohammad

Beilstein J. Nanotechnol. 2025, 16, 264–285, doi:10.3762/bjnano.16.21

• , including biochar, metal-organic frameworks (MOFs), functionalized mesoporous silica, porous organic polymers, zeolite, and derivatives of graphene. These substances act as a support for metal oxides and immobilize the catalyst, increase the catalyst surface area, and improve the chemical stability

TiO₂ immobilized on 2D mordenite: effect of hydrolysis conditions on structural, textural, and optical characteristics of the nanocomposites

• Marina G. Shelyapina,
• Rosario Isidro Yocupicio-Gaxiola,
• Gleb A. Valkovsky and
• Vitalii Petranovskii

Beilstein J. Nanotechnol. 2025, 16, 128–140, doi:10.3762/bjnano.16.12

• mesoporosity after calcination due to anatase nanoparticles of about 4 nm preventing the collapse of the interlamellar space. Immobilization of TiO2 on the zeolite surface is evidenced by the formation of Si–O–Ti bonds. The bandgap width of the synthetized nanocomposites was found to be sensitive to the

• hydrolysis medium. Keywords: 2D zeolite; hierarchical porosity; mordenite; TEOT; TiO2; titanium tetraethoxide; Introduction Zeolites are important heterogeneous catalysts in various industrial processes. More and more functional materials based on zeolites are being searched for, including zeolites with

• hybrid zeolite–CTAB aggregates, inorganic pillars are pre-formed in the CTAB layers, which will keep the zeolite lamellae from collapsing when burning the organic phase. The flexibility in the choice of material to form pillars creates a wide range of potential new materials for targeted applications

Theoretical study of the electronic and optical properties of a composite formed by the zeolite NaA and a magnetite cluster

• Joel Antúnez-García,
• Roberto Núñez-González,
• Vitalii Petranovskii,
• H’Linh Hmok,
• Armando Reyes-Serrato,
• Fabian N. Murrieta-Rico,
• Mufei Xiao and
• Jonathan Zamora

Beilstein J. Nanotechnol. 2025, 16, 44–53, doi:10.3762/bjnano.16.5

• Investigación Científica y Tecnológica A.C., Camino a la Presa San José 2055, Col. Lomas 4, San Luis Potosí, S.L.P. 78216, México 10.3762/bjnano.16.5 Abstract The electronic and optical properties of a composite created by introducing a magnetite cluster into NaA zeolite have been investigated in this work

• using DFT calculations. The results obtained indicate that the electronic and optical properties of the composite are enhanced because of the cluster. However, the properties exhibited by the cluster outside the zeolite differ from those it presents when it is part of the composite. It is noteworthy

• that the composite exhibits magnetic properties of a half-semiconductor and a strong optical response within the visible and ultraviolet regions of the spectrum. Keywords: magnetic cluster; NaA zeolite; optical properties; Introduction Zeolites are crystalline materials made up of aluminosilicates

Facile synthesis of Fe-based metal–organic frameworks from Fe₂O₃ nanoparticles and their application for CO₂/N₂ separation

• Van Nhieu Le,
• Hoai Duc Tran,
• Minh Tien Nguyen,
• Hai Bang Truong,
• Toan Minh Pham and
• Jinsoo Kim

Beilstein J. Nanotechnol. 2024, 15, 897–908, doi:10.3762/bjnano.15.74

• supertetrahedral structure. Following that, the hybrid structures self-assemble in a certain sequence to form a topology resembling the MTN-type of zeolite seen in Zeolite Socony Mobil Thirty-Nine (ZSM-39) [11]. The MIL-100(Fe) structure has a cubic series containing two types of large chambers with average

Interfacial nanoarchitectonics for ZIF-8 membranes with enhanced gas separation

• Season S. Chen,
• Zhen-Jie Yang,
• Chia-Hao Chang,
• Hoong-Uei Koh,
• Sameerah I. Al-Saeedi,
• Kuo-Lun Tung and
• Kevin C.-W. Wu

Beilstein J. Nanotechnol. 2022, 13, 313–324, doi:10.3762/bjnano.13.26

• chemical and thermal stability. Zeolite membranes, in contrast, are attractive for separation processes in harsh chemical environments and at high temperatures, owing to their high chemical and thermal stability. Additionally, these inorganic membranes possess relatively uniform pore structures and give

• rise to specific molecule-sized pores, which yield a high separation factor in the separation processes [9][10][11][12]. Wider application of zeolite membranes in separation is limited by the narrow pore-size range (0.2–2 nm) and the difficult chemical modification. Metal-organic frameworks (MOFs) are

• a novel class of porous crystalline materials formed by interconnecting organic linkers and metal ions. They possess a high accessible internal surface area (typically 500–7000 m2·g−1) [13][14]. In comparison to zeolite membranes, the synthesis conditions of MOF membranes are less energy intensive

A comprehensive review on electrospun nanohybrid membranes for wastewater treatment

• Senuri Kumarage,
• Imalka Munaweera and
• Nilwala Kottegoda

Beilstein J. Nanotechnol. 2022, 13, 137–159, doi:10.3762/bjnano.13.10

• predominant PEMs [13]. Zhang et al. developed nanohybrid PVDF membranes by incorporating zeolite with enhanced thermal and electrochemical performance for lithium-ion batteries [14]. ENHs have also been used as a heterogeneous catalyst in indole synthesis by Savva et al. by incorporating gold nanoparticles

• mixture of PVA, sodium alginate, and PEO with incorporated nano-sized ZSM5 zeolite, which contains hydroxy functional groups (HZSM5). The maximum adsorption values of Th4+ and U6+ ions were found to be 274.6 and 144.7 mg/g, respectively, at a HZSM5 content of 10 wt %, an adsorbent dosage of 1 g/L, and pH

• membranes due to the high surface area for particle adsorption. The hybridization of the electrospun membranes with additives improved the properties compared to pristine polymer membranes. GO, Fe2O3 and other metal oxides, HNTs, activated carbons, and zeolite are some of the frequently used additives for

Recent progress in magnetic applications for micro- and nanorobots

• Ke Xu,
• Shuang Xu and
• Fanan Wei

Beilstein J. Nanotechnol. 2021, 12, 744–755, doi:10.3762/bjnano.12.58

• ]. Wang et al. [83] successfully fabricated a biocompatible and pH-responsive magnetic helical microstructure coated with zinc-based MOF and zeolite imidazole framework-8 (ZIF-8). They also developed a helical swimmer with 2PP, also called artificial bacterial flagella, as shown in Figure 2. In order to

Synthesis of highly active ETS-10-based titanosilicate for heterogeneously catalyzed transesterification of triglycerides

• Muhammad A. Zaheer,
• David Poppitz,
• Khavar Feyzullayeva,
• Marianne Wenzel,
• Jörg Matysik,
• Radomir Ljupkovic,
• Aleksandra Zarubica,
• Alexander A. Karavaev,
• Andreas Pöppl,
• Roger Gläser and
• Muslim Dvoyashkin

Beilstein J. Nanotechnol. 2019, 10, 2039–2061, doi:10.3762/bjnano.10.200

• more basic than the NaX zeolite based on acetone selectivity in the conversion of isopropanol to acetone and propene [24]. However, due to its microporous nature, to the best of our knowledge, in all reported studies on the transesterification of triglycerides (single-component or in mixtures/oils) for

• zero-field splitting (ZFS) parameter (D >> 10 GHz) and a ratio between rhombic and axial ZFS of 1/3. Such Fe(III) centers have been commonly observed in zeolite and silica materials and were assigned to iron sites with a distorted tetrahedral coordination geometry [56][57]. In addition, P-ETS-10/60

• macropores in titanosilicates The introduction of mesopores after the post-synthetic treatment into initially microporous material does not necessarily lead to the organization of micro- and mesopores in a hierarchical manner. A prominent example is the dealumination of the USY zeolite by steaming as

BiOCl/TiO₂/diatomite composites with enhanced visible-light photocatalytic activity for the degradation of rhodamine B

• Minlin Ao,
• Kun Liu,
• Xuekun Tang,
• Zishun Li,
• Qian Peng and
• Jing Huang

Beilstein J. Nanotechnol. 2019, 10, 1412–1422, doi:10.3762/bjnano.10.139

• current works, this problem can be solved by fixing the TiO2 onto the surface of the carrier to form a uniform layer. Till now, various materials have been studied and successfully applied as the photocatalytic carrier such as kaolinite [16], diatomite [17], zeolite [18], silica nanofiber [19], etc., and

Electrospun one-dimensional nanostructures: a new horizon for gas sensing materials

• Muhammad Imran,
• Nunzio Motta and
• Mahnaz Shafiei

Beilstein J. Nanotechnol. 2018, 9, 2128–2170, doi:10.3762/bjnano.9.202

• have also been sensitized by MOFs. A Zn-based zeolite imidazole framework (Pd@ZIF-8, ≈80 nm) embedded with Pd NPs (≈2 nm) was used as a catalyst-loading platform for the efficient functionalization of a PdO@ZnO complex catalyst onto SnO2 NTs. Dual sensitized PdO@ZnO hollow SnO2 NTs (PdO@ZnO–SnO2 NTs

A review of carbon-based and non-carbon-based catalyst supports for the selective catalytic reduction of nitric oxide

• Shahreen Binti Izwan Anthonysamy,
• Syahidah Binti Afandi,
• Mehrnoush Khavarian and
• Abdul Rahman Bin Mohamed

Beilstein J. Nanotechnol. 2018, 9, 740–761, doi:10.3762/bjnano.9.68

• catalyst supports for nitric oxide (NO) removal through selective catalytic reduction (SCR) with ammonia are examined in this review. A number of carbon-based materials, such as carbon nanotubes (CNTs), activated carbon (AC), and graphene (GR) and non-carbon-based materials, such as Zeolite Socony Mobil–5

• -exchange zeolite catalysts [15]. The Mn-based catalyst is one of the most active metal oxide catalysts for high N2 selectivity at low temperature and is recognised by many researchers as a potential alternative for the common catalyst. Jin et al. [16] successfully used a Mn-based catalyst with the addition

• polyol process using Cu(NO3)·3H2O as the copper precursor. To date, many researchers have reviewed the SCR of NO at low temperature. Li et al. [9] reviewed low-temperature SCR on metal oxide and zeolite catalysts with a focus on catalyst performance and taking into account other possible mechanisms

The rational design of a Au(I) precursor for focused electron beam induced deposition

• Ali Marashdeh,
• Thiadrik Tiesma,
• Niels J. C. van Velzen,
• Sjoerd Harder,
• Remco W. A. Havenith,
• Jeff T. M. De Hosson and
• Willem F. van Dorp

Beilstein J. Nanotechnol. 2017, 8, 2753–2765, doi:10.3762/bjnano.8.274

• nanopores of a zeolite, directly after synthesis. We expect this to be a challenging experimental route. The second solution is the rational design of a new precursor. Me ligands reduce aurophilic interactions and thereby increase the stability of Au(I) compounds. Also, low-energy electrons are efficient in

Photocatalysis applications of some hybrid polymeric composites incorporating TiO₂ nanoparticles and their combinations with SiO₂/Fe₂O₃

• Andreea Laura Chibac,
• Tinca Buruiana,
• Violeta Melinte and
• Emil C. Buruiana

Beilstein J. Nanotechnol. 2017, 8, 272–286, doi:10.3762/bjnano.8.30

• pursued to reuse and reduce the expense caused by complex centrifugation or filtration steps of the nanostructured photocatalysts, for example, the preparation of TiO2 NPs with magnetic properties [27][28][29][30] or the immobilization of titania on/in diverse matrices such as glass, zeolite, ceramic

Prediction of the mechanical properties of zeolite pellets for aerospace molecular decontamination applications

• Guillaume Rioland,
• Patrick Dutournié,
• Delphine Faye,
• T. Jean Daou and
• Joël Patarin

Beilstein J. Nanotechnol. 2016, 7, 1761–1771, doi:10.3762/bjnano.7.169

• , France Service Laboratoires & Expertise, Centre National d’Etudes Spatiales (CNES), 18 avenue Edouard Belin, 31401 Toulouse Cedex 9, France 10.3762/bjnano.7.169 Abstract Zeolite pellets containing 5 wt % of binder (methylcellulose or sodium metasilicate) were formed with a hydraulic press. This paper

• experimental results. This leads to an empirical model for the estimation of the mechanical properties of zeolite pellets with 5 wt % of binder. The model was verified by additional experimental tests including pellets of different dimensions created with different applied pressures. The optimum dimensions

• decontamination; operating optimums; zeolite pellets; Introduction Molecular contamination is of great concern in aerospace-based applications. Once satellites are in orbit, molecules contained in paints, adhesives or glues can outgas and form films or droplets on the surface of mirrors, lenses, solar cells or

Tunable magnetism on the lateral mesoscale by post-processing of Co/Pt heterostructures

• Oleksandr V. Dobrovolskiy,
• Maksym Kompaniiets,
• Roland Sachser,
• Fabrizio Porrati,
• Christian Gspan,
• Harald Plank and
• Michael Huth

Beilstein J. Nanotechnol. 2015, 6, 1082–1090, doi:10.3762/bjnano.6.109

• evacuated down to 4.12 × 10−6 mbar. For removing the residual water from the SEM chamber a custom-made liquid-nitrogen trap filled with zeolite powder was employed. After the deposition all samples were heated up to 300 °C in the SEM without breaking the vacuum and subjected to a H2 flux fed into the SEM

Purification of ethanol for highly sensitive self-assembly experiments

• Kathrin Barbe,
• Martin Kind,
• Christian Pfeiffer and
• Andreas Terfort

Beilstein J. Nanotechnol. 2014, 5, 1254–1260, doi:10.3762/bjnano.5.139

• with the desired thiolates for surface sites. Here we present that gold nanoparticles deposited onto zeolite X can be used to remove these contaminants by chemisorption. This nanoparticle-impregnated zeolite does not only show high capacities for surface-active contaminants, such as thiols, but can be

• , zeolite, to facilitate the handling and to suppress coagulation. These hybrid systems were characterized using (scanning) transmission electron microscopy (TEM/STEM) and energy-dispersive X-ray (EDX) spectroscopy. The cleaning capacity of the immobilized NPs and their recyclability depending on the

• , tetrachloridoauric acid (HAuCl4), as starting material. This material can be readily adsorbed onto commercial zeolite X by soaking its solution in ethanol/water into the pores of the aluminosilicate. To facilitate the handling, we used the beaded material, commercially available as ‘molecular sieve’, instead of the

Organic and inorganic–organic thin film structures by molecular layer deposition: A review

• Pia Sundberg and
• Maarit Karppinen

Beilstein J. Nanotechnol. 2014, 5, 1104–1136, doi:10.3762/bjnano.5.123

Carbon dioxide hydrogenation to aromatic hydrocarbons by using an iron/iron oxide nanocatalyst

• Hongwang Wang,
• Jim Hodgson,
• Tej B. Shrestha,
• Prem S. Thapa,
• David Moore,
• Xiaorong Wu,
• Myles Ikenberry,
• Deryl L. Troyer,
• Donghai Wang,
• Keith L. Hohn and
• Stefan H. Bossmann

Beilstein J. Nanotechnol. 2014, 5, 760–769, doi:10.3762/bjnano.5.88

• catalysts by preventing sintering of active particles during the reaction [23][24]. When using zeolites as solid supports, the product distribution was highly dependent on the structure and acidity of the zeolites [25][26][27]. Iron–zeolite composites were reported as dual functional catalysts, which

Zeolites as nanoporous, gas-sensitive materials for in situ monitoring of DeNO_x-SCR

• Thomas Simons and
• Ulrich Simon

Beilstein J. Nanotechnol. 2012, 3, 667–673, doi:10.3762/bjnano.3.76

• sensor at the same time. By means of temperature-dependent impedance spectroscopy we found that the thermally induced NH3 desorption in H-form and in Fe-loaded zeolite H-ZSM-5 follow the same process, while a remarkable difference under DeNOx-SCR reaction conditions was found. The Fe-loaded catalyst

• elementary catalytic process promoting a full description of the NH3-SCR reaction system. Keywords: DeNOx-SCR; gas sensing; in situ; impedance spectroscopy; zeolite; Introduction Zeolites are crystalline, nanoporous aluminosilicates composed of [TO4] tetrahedra (T = Si, Al). In H-form zeolites protons

• compensate the negative charge of the [AlO4] tetrahedra by forming bridging Si–OH–Al groups, so-called Brønstedt sites, leading to various technical applications in catalysis owing to the resulting acidic properties [1]. The acidity depends on the Si/Al ratio, called the silica modulus of a zeolite, and it

Synthesis and catalytic applications of combined zeolitic/mesoporous materials

• Jarian Vernimmen,
• Vera Meynen and
• Pegie Cool

Beilstein J. Nanotechnol. 2011, 2, 785–801, doi:10.3762/bjnano.2.87

• ” hierarchical mesoporous zeolite, meaning a mesoporous material with zeolitic walls, wherein the micro- and mesopores are interconnected in order to form a hierarchical structure. Such mesoporous zeolites are expected to be superior materials since they will be able to catalyze the typical reactions in which

• pores is vital to maximize the benefit of hierarchy in catalyzed reactions. J. Pérez-Ramírez et al. [48] discussed the different degrees of hierarchy that can be obtained in a combined zeolitic/mesoporous material (Figure 1). In Figure 1a, the reference zeolite system is depicted, which gives rise to

• to TS-1 zeolite. In the hydroxylation of 2,3,6-trimethylphenol, MTS-9 is more active than both Ti-MCM-41 and TS-1. However, there are also examples of combined zeolitic/mesoporous materials, wherein there is no significant improvement when a comparison is drawn with standard zeolites or mesoporous

Generation and agglomeration behaviour of size-selected sub-nm iron clusters as catalysts for the growth of carbon nanotubes

• Ravi Joshi,
• Benjamin Waldschmidt,
• Jörg Engstler,
• Rolf Schäfer and
• Jörg J. Schneider

Beilstein J. Nanotechnol. 2011, 2, 734–739, doi:10.3762/bjnano.2.80

• , this allows us to tackle the lower size limit of catalyst particles necessary for CNT growth. The smallest CNT diameter realized so far is 0.4 nm, which was found to be stable only in a template environment, either of a double walled CNT [4][5], or the interior of a porous zeolite AlPO4-5 single

On the reticular construction concept of covalent organic frameworks

• Binit Lukose,
• Agnieszka Kuc,
• Johannes Frenzel and
• Thomas Heine

Beilstein J. Nanotechnol. 2010, 1, 60–70, doi:10.3762/bjnano.1.8

• , and that the synthesis can be carried out solvothermally. MOFs are commercially available, and the scale up of production is continuing. Since the discovery of MOFs, many other crystalline frameworks have been synthesized using reticular chemistry, such as Metal-Organic Polyhedra (MOP) [5], Zeolite