1-Butyl-3-methylimidazolium tetrafluoroborate as suitable solvent for BF₃: the case of alkyne hydration. Chemistry vs electrochemistry

• Marta David,
• Elisa Galli,
• Richard C. D. Brown,
• Marta Feroci,
• Fabrizio Vetica and
• Martina Bortolami

Beilstein J. Org. Chem. 2023, 19, 1966–1981, doi:10.3762/bjoc.19.147

• porous glass plug; Pt spirals (apparent area 0.8 cm2) were used as anode and cathode. 2.0 mL of BMIm-BF4 and the magnetic stirring bar were put in the anodic compartment (test tube, h = 10.5 cm, d = 1.7 cm), and 1.0 mL of the same IL in the cathodic one. Electrolyses were performed at constant current (I

Controlling the reactivity of La@C₈₂ by reduction: reaction of the La@C₈₂ anion with alkyl halide with high regioselectivity

• Yutaka Maeda,
• Saeka Akita,
• Mitsuaki Suzuki,
• Michio Yamada,
• Takeshi Akasaka,
• Kaoru Kobayashi and
• Shigeru Nagase

Beilstein J. Org. Chem. 2023, 19, 1858–1866, doi:10.3762/bjoc.19.138

• using a composite anode rod containing graphite and metal oxide. The composite rod was subjected to an arc discharge under a He atmosphere at 50 Torr. Raw soot was collected and suspended in 1,2,4-trichlorobenzene (TCB). The mixture was refluxed for 16 h. The TCB solution was collected and injected into

A deep-red fluorophore based on naphthothiadiazole as emitter with hybridized local and charge transfer and ambipolar transporting properties for electroluminescent devices

• Suangsiri Arunlimsawat,
• Patteera Funchien,
• Pongsakorn Chasing,
• Atthapon Saenubol,
• Taweesak Sudyoadsuk and
• Vinich Promarak

Beilstein J. Org. Chem. 2023, 19, 1664–1676, doi:10.3762/bjoc.19.122

• ) (30 nm)/tris(4-carbazoyl-9-ylphenyl)amine (TCTA) (10 nm)/TPECNZ (60 nm)/1,3,5-tris(1-phenyl-1H-benzimidazol-2-yl)benzene (TPBi) (40 nm)/LiF (1 nm)/Al (100 nm), in which ITO and Al served as anode and cathode, respectively (Figure 7a). Herein, HAT-CN and LiF were used as the hole- and electron

Organic thermally activated delayed fluorescence material with strained benzoguanidine donor

• Alexander C. Brannan,
• Elvie F. P. Beaumont,
• Nguyen Le Phuoc,
• George F. S. Whitehead,
• Mikko Linnolahti and
• Alexander S. Romanov

Beilstein J. Org. Chem. 2023, 19, 1289–1298, doi:10.3762/bjoc.19.95

• /petroleum ether into dichloromethane solution for 4BGIPN at room temperature. Crystals were mounted in oil on a MiTeGen loop and fixed on the diffractometer in a cold nitrogen stream. Data were collected using dual wavelength Rigaku FR-X rotating anode diffractometer using Cu Kα (λ = 1.54146 Å) radiation

Photoredox catalysis harvesting multiple photon or electrochemical energies

• Mattia Lepori,
• Simon Schmid and
• Joshua P. Barham

Beilstein J. Org. Chem. 2023, 19, 1055–1145, doi:10.3762/bjoc.19.81

Redox-active molecules as organocatalysts for selective oxidative transformations – an unperceived organocatalysis field

• Elena R. Lopat’eva,
• Igor B. Krylov,
• Dmitry A. Lapshin and
• Alexander O. Terent’ev

Beilstein J. Org. Chem. 2022, 18, 1672–1695, doi:10.3762/bjoc.18.179

• photoredox-catalyst or electrochemically on an anode. An example of the photochemical aerobic benzylic CH-oxidation employing a heterogeneous photoredox catalyst, nanosized TiO2, was demonstrated by our group [85] (Scheme 9). Mixing of NHPI and TiO2 leads to the emergence of visible light absorbance

• electrocatalytic efficiency (TON up to 2000) was achieved using the TEMPO derivative non-covalently immobilized on the surface of a carbon cloth anode due to the π–π stacking interaction between the pyrene fragment of the catalyst and the electrode surface [103] (Scheme 15). However, this method is not compatible

• conditions the oxidative ABNO-catalyzed α-cyanation of amines was realized with no need for N-protecting groups [105] (Scheme 16B). The key reactive species proposed in these electrochemical reactions are the oxoammonium cations formed from the amine-N-oxyl catalyst at the anode. The oxoammonium cation

Microelectrode arrays, electrosynthesis, and the optimization of signaling on an inert, stable surface

• Kendra Drayton-White,
• Siyue Liu,
• Yu-Chia Chang,
• Sakashi Uppal and
• Kevin D. Moeller

Beilstein J. Org. Chem. 2022, 18, 1488–1498, doi:10.3762/bjoc.18.156

• direct analogy to the experiment shown in Figure 4. The current associated with this redox couple at each of the electrode in the array was again monitored by using the array as an anode and the remote Pt electrode in the electrolysis cell as a cathode. The surface of the array was the arylbromide-based

Ionic multiresonant thermally activated delayed fluorescence emitters for light emitting electrochemical cells

• Merve Karaman,
• Abhishek Kumar Gupta,
• Subeesh Madayanad Suresh,
• Tomas Matulaitis,
• Lorenzo Mardegan,
• Daniel Tordera,
• Henk J. Bolink,
• Sen Wu,
• Stuart Warriner,
• Ifor D. Samuel and
• Eli Zysman-Colman

Beilstein J. Org. Chem. 2022, 18, 1311–1321, doi:10.3762/bjoc.18.136

• levels of the electroactive species and work function of the electrodes. Injection of electrons and holes creates oxidized and reduced species near the anode and cathode, respectively. These oxidized and reduced species are stabilized by the ions to form a p-i-n junction in the bulk of the emissive layer

A one-pot electrochemical synthesis of 2-aminothiazoles from active methylene ketones and thioureas mediated by NH₄I

• Shang-Feng Yang,
• Pei Li,
• Zi-Lin Fang,
• Sen Liang,
• Hong-Yu Tian,
• Bao-Guo Sun,
• Kun Xu and
• Cheng-Chu Zeng

Beilstein J. Org. Chem. 2022, 18, 1249–1255, doi:10.3762/bjoc.18.130

• mmol) in DMSO 1 mL + H2O 14 mL, undivided cell, graphite plate anode and cathode, 30 °C, 5 mA/cm2, 6 F/mol; isolated yields are given. a8 F/mol. Up-scaling experiment. Control experiments. The proposed mechanism for the one-pot electrochemical synthesis of 2-aminothiazoles mediated by NH4I

Reductive opening of a cyclopropane ring in the Ni(II) coordination environment: a route to functionalized dehydroalanine and cysteine derivatives

• Oleg A. Levitskiy,
• Olga I. Aglamazova,
• Yuri K. Grishin and
• Tatiana V. Magdesieva

Beilstein J. Org. Chem. 2022, 18, 1166–1176, doi:10.3762/bjoc.18.121

• can be achieved if the electrolysis is performed in the undivided cell equipped with a Zn or Mg anode. In this case, the anodically generated Zn2+ or Mg2+ worked as Lewis acid and the isomeric α-β and β-γ alkene complexes are formed in 54:1 ratio (though the total yield is decreased to 50%). In case

Electro-conversion of cumene into acetophenone using boron-doped diamond electrodes

• Mana Kitano,
• Tsuyoshi Saitoh,
• Shigeru Nishiyama,
• Yasuaki Einaga and
• Takashi Yamamoto

Beilstein J. Org. Chem. 2022, 18, 1154–1158, doi:10.3762/bjoc.18.119

• reagent, which allows to reduce the reagent waste to a minimum. Obviously, as this characteristic matches well with the increasing demands to realize a sustainable society. In electro-organic synthesis, electrode materials are one of the most significant parameters because reactions occur at the anode and

• anode. The role of electrode materials was investigated with electrochemical measurements. Only the BDD anode with a wide potential window can oxidize cumene directly to afford a cumyl cation as the reaction intermediate. Furthermore, acetophenone is produced via cumene hydroperoxide, and this molecular

• , entries 5–7). As the isolated yield of 3 was not particularly improved by changing j and Q, we set the optimum conditions as j of 2.1 mA/cm2 and Q of 5 F. On the other hand, when the combination of anode and cathode was graphite/graphite or Ni/Ni (Table 1, entries 8 and 9), almost no acetophenone was

Synthesis of protected precursors of chitin oligosaccharides by electrochemical polyglycosylation of thioglycosides

• Md Azadur Rahman,
• Kana Kuroda,
• Hirofumi Endo,
• Norihiko Sasaki,
• Tomoaki Hamada,
• Hiraku Sakai and
• Toshiki Nokami

Beilstein J. Org. Chem. 2022, 18, 1133–1139, doi:10.3762/bjoc.18.117

• electrochemical activation occurs at the surface of the anode and the substrates must move to the surface of the electrode. To confirm the reactivity of oligosaccharides, we measured oxidation potentials of monosaccharide 1a, disaccharide 2a, and trisaccharide 3a using a rotating disk electrode (RDE) made of

Electrogenerated base-promoted cyclopropanation using alkyl 2-chloroacetates

• Kouichi Matsumoto,
• Yuta Hayashi,
• Kengo Hamasaki,
• Mizuki Matsuse,
• Hiyono Suzuki,
• Keiji Nishiwaki and
• Norihito Kawashita

Beilstein J. Org. Chem. 2022, 18, 1116–1122, doi:10.3762/bjoc.18.114

• ). Various parameters were varied to increase the chemical yield, as shown in Table 1. For example, the use of carbon felt as the cathode produced 2 in ≪25% yield (Table 1, entry 2). The small influence of the anodic electrode material was confirmed in the reaction using carbon felt as the anode. In this

• consumed on the surface of the anode. To examine the scope and limitations, we carried out electrochemical reductions of various alkyl 2-haloacetates under the optimized conditions. Table 3 summarizes the results. The reaction of methyl 2-chloroacetate (3) afforded the corresponding compound 4 in 28% yield

Electrochemical formal homocoupling of sec-alcohols

• Kosuke Yamamoto,
• Kazuhisa Arita,
• Masashi Shiota,
• Masami Kuriyama and
• Osamu Onomura

Beilstein J. Org. Chem. 2022, 18, 1062–1069, doi:10.3762/bjoc.18.108

• sacrificial anode would be a promising approach toward synthetically valuable vic-1,2-diol scaffolds without using low-valent metal reductants. However, sacrificial anodes produce an equimolar amount of metal waste, which may be a major issue in terms of sustainable chemistry. Herein, we report a sacrificial

• anode-free electrochemical protocol for the synthesis of pinacol-type vic-1,2-diols from sec-alcohols, namely benzyl alcohol derivatives and ethyl lactate. The corresponding vic-1,2-diols are obtained in moderate to good yields, and good to high levels of stereoselectivity are observed for sec-benzyl

• simple and user-friendly undivided cell set-up, consuming the anode material with generating stoichiometric metal waste may be a serious issue in terms of green and sustainable chemistry. Thus, the development of a sacrificial anode-free process such as paired electrolysis would be highly desirable [40

Electrochemical hydrogenation of enones using a proton-exchange membrane reactor: selectivity and utility

• Koichi Mitsudo,
• Haruka Inoue,
• Yuta Niki,
• Eisuke Sato and
• Seiji Suga

Beilstein J. Org. Chem. 2022, 18, 1055–1061, doi:10.3762/bjoc.18.107

• cathode catalyst. Reaction conditions: anode catalyst Pt/C, cathode catalyst Pd/C, concentration of 1 1.0 M, solvent dichloromethane, flow rate of the solution of 1 0.25 mL⋅min−1, flow rate of H2 gas 100 mL⋅min−1, reaction temperature room temperature, current density 50 mA⋅cm−2. Charge was passed to the

• reactor using an Ir/C cathode catalyst. Reaction conditions: anode catalyst Pt/C, cathode catalyst Ir/C, concentration of 1 1.0 M, solvent dichloromethane, flow rate of the solution of 1 0.25 mL⋅min−1, flow rate of H2 gas 100 mL⋅min−1, reaction temperature room temperature, current density 50 mA⋅cm−2

Electrochemical Friedel–Crafts-type amidomethylation of arenes by a novel electrochemical oxidation system using a quasi-divided cell and trialkylammonium tetrafluoroborate

• Hisanori Senboku,
• Mizuki Hayama and
• Hidetoshi Matsuno

Beilstein J. Org. Chem. 2022, 18, 1040–1046, doi:10.3762/bjoc.18.105

• 1,3,5-trimethoxybenzene or indoles in DMA containing 0.1 M iPr2NHEtBF4 using an undivided cell equipped with a Pt plate cathode and a Pt wire anode (a quasi-divided cell) resulted in selective formation of N-acyliminium ions of DMA at the anode, which reacted with arenes to give the corresponding

• -rich arenes or silyl enol ethers preferentially takes place at the anode due to their, in general, more positive oxidation potentials than those of amides/carbamates. Therefore, Friedel–Crafts-type amidomethylation by using Shono oxidation is successfully carried out as a two-step process

• plate cathode and a Pt wire anode (a quasi-divided cell) [24][25][26][27][28] in the presence of carbon dioxide resulted in reductive carboxylation at the cathode and selective formation of N-acyliminium ions of DMF at the anode to produce coupling products, N-phenylacetoxymethyl-N-methylformamides, in

Electrochemical vicinal oxyazidation of α-arylvinyl acetates

• Yi-Lun Li,
• Zhaojiang Shi,
• Tao Shen and
• Ke-Yin Ye

Beilstein J. Org. Chem. 2022, 18, 1026–1031, doi:10.3762/bjoc.18.103

• (Ecell = 2.3 V, carbon cloth anode, and Pt cathode) of 1-phenylvinyl acetate (1) with azidotrimethylsilane was performed and the desired α-azidoketone (2) was obtained in 68% yield (Table 1, entry 1, for details of the reaction optimization see Supporting Information File 1). The cyclic voltammetry

• relevant heterocycles. From vinyl acetates to α-azidoketones. Substrate scope. Reaction conditions: α-arylvinyl acetate (0.5 mmol), TMSN3 (1.0 mmol), n-Bu4NPF6 (0.5 mmol), H2O (2.5 mmol), MeCN (5 mL), carbon cloth anode, platinum cathode, undivided cell, Ecell = 2.3 V, room temperature, 6 h. a2 h

First example of organocatalysis by cathodic N-heterocyclic carbene generation and accumulation using a divided electrochemical flow cell

• Daniele Rocco,
• Ana A. Folgueiras-Amador,
• Richard C. D. Brown and
• Marta Feroci

Beilstein J. Org. Chem. 2022, 18, 979–990, doi:10.3762/bjoc.18.98

• reduction of an imidazolium cation to NHC, in an undivided cell under flow conditions, coupled with the anodic generation of Cu(I) from a sacrificial anode to yield the corresponding N-heterocyclic carbene complex [34][35]. In this case, irreversible capture of the NHC by the metallic cation prevented NHC

• chamber (Figure 1). The requirement for a divided cell (a more complicated device than the undivided configuration) arises from the need to protect electrogenerated NHC from its anodic oxidation in the absence of a consumable anode. To ensure good sealing of the electrolysis cell, the sandwich-type

• -permeable membrane (Nafion® 438) was inserted to separate the cathode and anode chambers, and a spacer was used on each compartment [36]. The initial goal of this work was to demonstrate the possibility to achieve NHC formation starting from 1-butyl-3-methylimidazolium tetrafluoroborate (BMImBF4), by

Electroreductive coupling of 2-acylbenzoates with α,β-unsaturated carbonyl compounds: density functional theory study on product selectivity

• Naoki Kise and
• Toshihiko Sakurai

Beilstein J. Org. Chem. 2022, 18, 956–962, doi:10.3762/bjoc.18.95

• ) was placed in the cathodic chamber of a divided cell (40 mL beaker, 3 cm diameter, 6 cm height) equipped with a platinum cathode (5 × 5 cm2), a platinum anode (2 × 1 cm2), and a ceramic cylindrical diaphragm (1.5 cm diameter). A 0.3 M solution of Bu4NClO4 in DMF (4 mL) was placed in the anodic chamber

Synthesis of piperidine and pyrrolidine derivatives by electroreductive cyclization of imine with terminal dihaloalkanes in a flow microreactor

• Yuki Naito,
• Naoki Shida and
• Mahito Atobe

Beilstein J. Org. Chem. 2022, 18, 350–359, doi:10.3762/bjoc.18.39

• . The microreactor fabricated for the model reaction had a simple geometry with the cathode and anode directly facing each other at a distance of several tens of micrometers (Figure 2). The electrolyte containing benzylideneaniline (1) and 1,4-dibromobutane (2a) was pumped into the gap between the two

• electrodes and subjected to the electrolytic reaction. Tetrahydrofuran (THF), which is easily oxidized, was employed as the electrolytic solvent, so the reaction at the anode (counter electrode) is thought to be preferentially caused by the oxidative decomposition of THF, and the re-oxidation of the cathodic

• reaction products at the anode would be suppressed. On the other hand, the cathode material is an important factor in selecting the course of the cathodic reaction and to control the efficiency of the reaction. To select a suitable cathode material for this model reaction, we first investigated the effect

Electrocatalytic C(sp³)–H/C(sp)–H cross-coupling in continuous flow through TEMPO/copper relay catalysis

• Bin Guo and
• Hai-Chao Xu

Beilstein J. Org. Chem. 2021, 17, 2650–2656, doi:10.3762/bjoc.17.178

• electrosynthesis was conducted in a microreactor equipped with two Pt electrodes as the anode and cathode and operated with a constant current (Table 1). Under the optimized conditions, a solution of tetrahydroisoquinoline 1a (1 equiv), alkyne 2 (1.5 equiv), Cu(OTf)2 (10 mol %), TEMPO (20 mol %), n-Bu4NPF6 (0.2

• oxoammonium salt TEMPO+ [50][51], which reacts with tetrahydroisoquinoline 23 to generate TEMPOH and iminium ion 24 [52], TEMPOH is oxidized back to TEMPO+ on the anode. On the other hand, 24 is converted to the final product 25 through reaction with copper acetylide 26, which is generated from CuI and the

• scope. Reaction conditions: Pt anode, Pt cathode, interelectrode distance 0.25 mm, 1 (0.03 M, 0.21 mmol), 2 (0.045 M, 1.5 equiv), Cu(OTf)2 (10 mol %), TEMPO (20 mol %), n-Bu4NPF6 (20 mol %), TFE (3.5 equiv), MeCN (7 mL), I = 30 mA, flow rate = 0.20 mL min−1, rt. Isolated yields are reported. Reaction

Clustering and curation of electropherograms: an efficient method for analyzing large cohorts of capillary electrophoresis glycomic profiles for bioprocessing operations

• Ian Walsh,
• Matthew S. F. Choo,
• Sim Lyn Chiin,
• Amelia Mak,
• Shi Jie Tay,
• Pauline M. Rudd,
• Yang Yuansheng,
• Andre Choo,
• Ho Ying Swan and
• Terry Nguyen-Khuong

Beilstein J. Org. Chem. 2020, 16, 2087–2099, doi:10.3762/bjoc.16.176

• µm i.d. uncoated bare fused capillary, HR-NCHO separation gel buffer (Sciex). The applied electric field strength was 1500 V/cm with the cathode at the injection side and the anode at the detection side (reversed polarity). Samples were electrokinetically injected using 1kV for 5 s. For migration

Five-component, one-pot synthesis of an electroactive rotaxane comprising a bisferrocene macrocycle

• Natalie Lagesse,
• Luca Pisciottani,
• Maxime Douarre,
• Pascale Godard,
• Brice Kauffmann,
• Vicente Martí-Centelles and
• Nathan D. McClenaghan

Beilstein J. Org. Chem. 2020, 16, 1564–1571, doi:10.3762/bjoc.16.128

• Rigaku FRX® high flux rotating anode with a Pilatus 200K hybrid pixel detector. Using Olex2 [27], the structure was solved with the ShelXT [28] structure solution program using Intrinsic Phasing and refined with the ShelXL [29] refinement package using the full least-squares correlation matrix. The non

Heterogeneous photocatalysis in flow chemical reactors

• Christopher G. Thomson,
• Ai-Lan Lee and
• Filipe Vilela

Beilstein J. Org. Chem. 2020, 16, 1495–1549, doi:10.3762/bjoc.16.125

Oxime radicals: generation, properties and application in organic synthesis

• Igor B. Krylov,
• Stanislav A. Paveliev,
• Alexander S. Budnikov and
• Alexander O. Terent’ev

Beilstein J. Org. Chem. 2020, 16, 1234–1276, doi:10.3762/bjoc.16.107