All-carbon [3 + 2] cycloaddition in natural product synthesis

• Zhuo Wang and
• Junyang Liu

Beilstein J. Org. Chem. 2020, 16, 3015–3031, doi:10.3762/bjoc.16.251

• as the phosphine-catalyzed [3 + 2] cycloaddition [17], platinum-catalyzed [3 + 2] cycloaddition [18], and Rhodium-catalyzed [3 + 2] cycloaddition [12], were invented and have been extensively used in natural product synthesis in the last decade. Many reviews focusing the method development of the all

• Lee [24] independently in 2003. (Scheme 1C and Scheme 1D) In Krische’s synthesis, a stereospecific intramolecular phosphine-catalyzed [3 + 2] cycloaddition of 2-butynoate with electron-deficient alkene 29 afforded cycloadduct 31 in 88% yield as a single diastereomer [25] (Scheme 1C). Later, Lee`s

• (9) was accomplished from 81 in two steps. Phosphine-catalyzed [3 + 2] cycloaddition In 1995, Lu and co-workers reported a phosphine-catalyzed [3 + 2] cycloaddition, employing electron-deficient olefins and either 2,3-butadienoates or 2-butynoates to give a cyclopentene as product [17] (Scheme 5A

Synthetic approaches to bowl-shaped π-conjugated sumanene and its congeners

• Shakeel Alvi and
• Rashid Ali

Beilstein J. Org. Chem. 2020, 16, 2212–2259, doi:10.3762/bjoc.16.186

• strategy via the transfer of sp3 chirality of 27 into the bowl chirality of 28 as a key conversion (Scheme 3) [17][31]. In this context, they began with the Pd-catalyzed hydrosilylation reaction using HSiCl3 at −3 °C in the presence of a chiral phosphine ligand to furnish the hydrosilylated product which

Regioselective cobalt(II)-catalyzed [2 + 3] cycloaddition reaction of fluoroalkylated alkynes with 2-formylphenylboronic acids: easy access to 2-fluoroalkylated indenols

• Tatsuya Kumon,
• Miroku Shimada,
• Jianyan Wu,
• Shigeyuki Yamada and
• Tsutomu Konno

Beilstein J. Org. Chem. 2020, 16, 2193–2200, doi:10.3762/bjoc.16.184

• resulted in the sluggish formation of the fluoroalkylated indenols or indanone (Table 1, entries 7–9). When 1,3-bis(diphenylphosphino)propane (dppp) was used as a phosphine ligand, the desired indenol 3aA was obtained in a moderate yield and with high regioselectivity of 98:2, together with a very small

Efficient [(NHC)Au(NTf₂)]-catalyzed hydrohydrazidation of terminal and internal alkynes

• Maximillian Heidrich and
• Herbert Plenio

Beilstein J. Org. Chem. 2020, 16, 2080–2086, doi:10.3762/bjoc.16.175

• activity of gold complexes in such reactions tends to be higher, when using sterically demanding ligands (NHC, phosphine) [41]. Recently, the hydrohydrazidation of substituted phenylacetylenes using [(Ph3P)Au(NTf2)] as the catalyst was reported by Rassadin, Kukushkin et al. [42]. Catalyst loadings of 6 mol

Metal-free synthesis of phosphinoylchroman-4-ones via a radical phosphinoylation–cyclization cascade mediated by K₂S₂O₈

• Qiang Liu,
• Weibang Lu,
• Guanqun Xie and
• Xiaoxia Wang

Beilstein J. Org. Chem. 2020, 16, 1974–1982, doi:10.3762/bjoc.16.164

• Qiang Liu Weibang Lu Guanqun Xie Xiaoxia Wang Dongguan University of Technology, Dongguan 523808, P. R. China Department of Applied Chemistry, School of Science, Xi’an Jiaotong University, Xi’an 710049, P. R. China 10.3762/bjoc.16.164 Abstract A variety of chroman-4-ones bearing phosphine oxide

• synthesize a series of phosphine oxide and phosphonate-functionalized chroman-4-ones. Unfortunately, the preparation of the substrates involved a Rh-catalyzed hydrophosphinylation of a protected functional alkyne, and the subsequent deprotection with Hg(O2CCF3)2, which is not environmentally benign (Scheme

• (DPPO) was not suitable for the transformation (Scheme 1b). So the development of metal-free and greener methods to approach chroman-4-ones bearing a phosphine oxide moiety is still highly desirable. Herein, we present a transition-metal-free radical cascade cyclization to access the desired chroman-4

Synergy between supported ionic liquid-like phases and immobilized palladium N-heterocyclic carbene–phosphine complexes for the Negishi reaction under flow conditions

• Edgar Peris,
• Raúl Porcar,
• María Macia,
• Jesús Alcázar,
• Eduardo García-Verdugo and
• Santiago V. Luis

Beilstein J. Org. Chem. 2020, 16, 1924–1935, doi:10.3762/bjoc.16.159

• additional phosphine ligand produced a clear positive effect on the activity, enhancing the catalytic performance of the immobilized NHC–Pd complexes assayed as clearly shown in the kinetics profiles depicted in Figure 1. Both NHC–Pd–RuPhos catalysts showed an activity increase: ca. 10-fold for 8a and ca

• performance in the presence of one equivalent of the phosphine. The catalysts prepared by NaBH4 reduction were slightly less reactive than those obtained with EtOH as reducing agent. Noteworthy, the supported catalysts were active in further catalytic cycles after separation of the product by filtration and

Pauson–Khand reaction of fluorinated compounds

• Jorge Escorihuela,
• Daniel M. Sedgwick,
• Alberto Llobat,
• Mercedes Medio-Simón,
• Pablo Barrio and
• Santos Fustero

Beilstein J. Org. Chem. 2020, 16, 1662–1682, doi:10.3762/bjoc.16.138

• , mild oxidizing additives such as amine oxides, aminophosphines, phosphine oxides, and sulfoxides may be used as promoters to facilitate the dissociation step, by oxidatively removing one of the CO ligands in form of CO2 [40]. The most common oxidants are N-morpholine N-oxide (NMO), trimethylamine N

Synthesis and properties of quinazoline-based versatile exciplex-forming compounds

• Rasa Keruckiene,
• Simona Vekteryte,
• Ervinas Urbonas,
• Matas Guzauskas,
• Eigirdas Skuodis,
• Dmytro Volyniuk and
• Juozas V. Grazulevicius

Beilstein J. Org. Chem. 2020, 16, 1142–1153, doi:10.3762/bjoc.16.101

• injecting/transporting/blocking layers hexaazatriphenylenehexacarbonitrile (HAT-CN), N,N′-di(1-naphthyl)-N,N′-diphenyl-(1,1′-biphenyl)-4,4′-diamine (NPB), diphenyl[4-(triphenylsilyl)phenyl]phosphine oxide (TSPO1), 2,2′,2′′-(1,3,5-benzinetriyl)-tris(1-phenyl-1H-benzimidazole) (TPBi), and fluorolithium (LiF

Pd-catalyzed asymmetric Suzuki–Miyaura coupling reactions for the synthesis of chiral biaryl compounds with a large steric substituent at the 2-position

• Yongsu Li,
• Bendu Pan,
• Xuefeng He,
• Wang Xia,
• Yaqi Zhang,
• Hao Liang,
• Chitreddy V. Subba Reddy,
• Rihui Cao and
• Liqin Qiu

Beilstein J. Org. Chem. 2020, 16, 966–973, doi:10.3762/bjoc.16.85

• from chemists because of their widespread appearance in biologically active compounds [1][2][3][4] such as vancomycin [5] and korupensamine A [6] and as useful chiral ligands in asymmetric catalysis. Different strategies with various metals and phosphine ligands had been successfully employed for the

• efficient synthesis of this scaffold [7][8][9][10][11][12][13][14][15][16][17][18][19][20][21][22], like Hiyama [23][24], Negishi [25][26] or Suzuki–Miyaura couplings [27][28][29][30][31][32][33][34][35][36]. In these synthetic strategies, the reaction system of palladium with chiral phosphine ligands was

• (1g) and 1-naphthylboronic acid (2a) were utilized to synthesize axially chiral compound 3g. This reaction was selected as model reaction for further optimization of Pd sources, ligands (Figure 1), solvents, bases and temperature. At first, various phosphine ligands were screened with 2.5 mol % Pd2

Recent advances in Cu-catalyzed C(sp³)–Si and C(sp³)–B bond formation

• Balaram S. Takale,
• Ruchita R. Thakore,
• Elham Etemadi-Davan and
• Bruce H. Lipshutz

Beilstein J. Org. Chem. 2020, 16, 691–737, doi:10.3762/bjoc.16.67

• study from the Riant group [45] that performed asymmetric 1,2-additions on aldehydes using Suginome’s reagent in the presence of phosphine-ligated copper (Scheme 20A). After optimization, they found that DTBM-Segphos (L12; 10 mol %) together with CuCl (5 mol %) led to moderate yields (46%) and high ee

• ]. Following this report, Oestreich and co-workers examined asymmetric additions of silicon to unsaturated ketones 113 using P–N-type ligand L13. However, the background reaction of the silyl–zinc reagent was predominant leading to poor chirality transfer from the phosphine ligand L13, giving essentially the

• either CuCl/quinoxP* or their in-house-developed chiral sulfoxide phosphine ligand (SOP). Excellent diastereo- and enantioselectivities were obtained. A gram scale synthesis of (S)-naproxen was also described as a “real world” application [106]. From previous findings involving trapping of a vinylarene

Rhodium-catalyzed reductive carbonylation of aryl iodides to arylaldehydes with syngas

• Zhenghui Liu,
• Peng Wang,
• Zhenzhong Yan,
• Suqing Chen,
• Dongkun Yu,
• Xinhui Zhao and
• Tiancheng Mu

Beilstein J. Org. Chem. 2020, 16, 645–656, doi:10.3762/bjoc.16.61

• of China, Beijing 100872, China 10.3762/bjoc.16.61 Abstract The reductive carbonylation of aryl iodides to aryl aldehydes possesses broad application prospects. We present an efficient and facile Rh-based catalytic system composed of the commercially available Rh salt RhCl3·3H2O, PPh3 as phosphine

• completing the catalytic cycle. Conclusion An efficient and facile Rh-based catalytic system composed of a commercially available Rh salt, RhCl3·3H2O, a phosphine ligand PPh3, and a base Et3N, was evaluated for the synthesis of arylaldehydes via the reductive carbonylation of aryl iodides using CO as

Efficient synthesis of 3,6,13,16-tetrasubstituted-tetrabenzo[a,d,j,m]coronenes by selective C–H/C–O arylations of anthraquinone derivatives

• Seiya Terai,
• Yuki Sato,
• Takuya Kochi and
• Fumitoshi Kakiuchi

Beilstein J. Org. Chem. 2020, 16, 544–550, doi:10.3762/bjoc.16.51

• ][21][22][23][24][25][26][27][28][29][30][31][32][33]. In the presence of ruthenium carbonyl phosphine complexes, the reaction of aromatic ketones possessing C–H bonds or C–OR (R = alkyl) bonds with arylboronates provided C–H or C–O arylation products [21][22][23][24][25][26][27][28][29][30][31][32][33

Aerobic synthesis of N-sulfonylamidines mediated by N-heterocyclic carbene copper(I) catalysts

• Faïma Lazreg,
• Marie Vasseur,
• Alexandra M. Z. Slawin and
• Catherine S. J. Cazin

Beilstein J. Org. Chem. 2020, 16, 482–491, doi:10.3762/bjoc.16.43

• area, reporting on the synthesis of the first heteroleptic bis-NHC and mixed NHC/phosphine copper(I) complexes [20][21][22]. Interestingly, these new copper-based complexes have shown excellent activity in the [3 + 2] cycloaddition reaction of azides/sulfonyl azides and alkynes (Scheme 1, right) [22

Architecture and synthesis of P,N-heterocyclic phosphine ligands

• Wisdom A. Munzeiwa,
• Bernard Omondi and
• Vincent O. Nyamori

Beilstein J. Org. Chem. 2020, 16, 362–383, doi:10.3762/bjoc.16.35

• , Pietermaritzburg 3201, South Africa 10.3762/bjoc.16.35 Abstract Diverse P,N-phosphine ligands reported to date have performed exceptionally well as auxiliary ligands in organometallic catalysis. Phosphines bearing 2-pyridyl moieties prominently feature in literature as compared to phosphines with five-membered N

• -heterocycles. This discussion seeks to paint a broad picture and consolidate different synthetic protocols and techniques for N-heterocyclic phosphine motifs. The introduction provides an account of P,N-phosphine ligands, and their structural and coordination benefits from combining heteroatoms with different

• monitoring and in situ speciation. In addition, phosphine ligands have found various applications as auxiliary ligands in organometallic transition-metal complexes. A great number have exhibited potential application in organic light-emitting devices (OLEDs) [3], medicine [4][5][6] and catalysis [1][7][8

Copper-catalyzed enantioselective conjugate addition of organometallic reagents to challenging Michael acceptors

• Delphine Pichon,
• Jennifer Morvan,
• Christophe Crévisy and
• Marc Mauduit

Beilstein J. Org. Chem. 2020, 16, 212–232, doi:10.3762/bjoc.16.24

• reagents was reported by Alexakis and co-workers in 2010 [14]. After screening various chiral phosphine-based ligands, the combinations of either phosphoramidite L1 with Cu(OTf)2, or (R)-BINAP (L2) with copper thiophenecarboxylate (CuTC) appeared to be the most efficient for the addition of Et2Zn to a

• ) and phosphine-based ligands (b). One-pot Cu-catalyzed ECA/organocatalyzed α-substitution of enals. Combination of copper and amino catalysis for enantioselective β-functionalizations of enals. Optimized conditions for the Cu ECAs of R2Zn, RMgBr, and AlMe3 with α,β-unsaturated aldehydes. CuECA of

[1,3]/[1,4]-Sulfur atom migration in β-hydroxyalkylphosphine sulfides

• Katarzyna Włodarczyk,
• Piotr Borowski and
• Marek Stankevič

Beilstein J. Org. Chem. 2020, 16, 88–105, doi:10.3762/bjoc.16.11

• stereoselective manner, given that corresponding chiral substrates were used for the cyclization. The chiral compounds suitable for cyclization could be obtained by desymmetrization of phosphine sulfides (Scheme 3) [58]. In order to gain insight into the cationic cyclization of β-hydroxyalkylphosphine sulfides, a

• for β-hydroxyalkylphosphine oxides [56][57], this led to the formation of cyclic phosphine oxides 3 and 26 rather than phosphine sulfides. It may be assumed that hydrolysis of the P=S bond occurred under these reaction conditions and, probably, racemization of the phosphorus center in the case of

• nonracemic β-hydroxyalkylphosphine sulfides. Indeed, the attempted cyclization of (SP)-19 under standard reaction conditions led to the formation of the completely racemic phosphine oxide 3 (Scheme 5). The above results clearly show that phosphoric acid was inappropriate for the cyclization of nonracemic β

Functionalization of the imidazo[1,2-a]pyridine ring in α-phosphonoacrylates and α-phosphonopropionates via microwave-assisted Mizoroki–Heck reaction

• Damian Kusy,
• Agata Wojciechowska,
• Joanna Małolepsza and
• Katarzyna M. Błażewska

Beilstein J. Org. Chem. 2020, 16, 15–21, doi:10.3762/bjoc.16.3

• is rarely applied for the functionalization of molecules bearing phosphonate or phosphine oxide groups, and the known reactions involve high temperatures (≈100 °C) and long reaction times (in most cases >24 h) [4][5][6][7]. Herein we disclose the first method for functionalization of molecules

• compounds 1 and 2, was successfully achieved. We used tri(o-tolyl)phosphine (P(o-tol)3, palladium(II) acetate (Pd(OAc)2) and obtained the desired product (E)-benzyl 3-(6-aminopyridin-3-yl)acrylate in 86% yield (see Supporting Informaiton File 1). However, when the same conditions were applied to alkyl 3-(6

Palladium-catalyzed synthesis and nucleotide pyrophosphatase inhibition of benzo[4,5]furo[3,2-b]indoles

• Hoang Huy Do,
• Saif Ullah,
• Alexander Villinger,
• Joanna Lecka,
• Jean Sévigny,
• Peter Ehlers,
• Jamshed Iqbal and
• Peter Langer

Beilstein J. Org. Chem. 2019, 15, 2830–2839, doi:10.3762/bjoc.15.276

• ). Monodentate ligands, like XPhos, SPhos, DavePhos, RuPhos, or P(t-Bu)3·HBF4, were not effective in the reaction and gave product 5b in low yields. Bidentate phosphine ligands, such as BINAP, XantPhos, dppe, or dppf (Table 1), worked very well and allowed to improve the yield of 5b up to 75% (Table 1, entry 4

Chiral terpene auxiliaries V: Synthesis of new chiral γ-hydroxyphosphine oxides derived from α-pinene

• Anna Kmieciak and
• Marek P. Krzemiński

Beilstein J. Org. Chem. 2019, 15, 2493–2499, doi:10.3762/bjoc.15.242

• site providing a trans relationship between the hydroxy and the phosphine substituents. Keywords: isopinocamphone; monoterpenes; phosphines; [2,3]-sigmatropic rearrangement; verbanone; Introduction Chiral phosphorus compounds, despite many years of research, still enjoy unflagging interest of many

• ], conjugated additions to enones [7], and allylic alkylations [8][9]. Another direction of research is the use of phosphines in organocatalysis [10][11] and bifunctional catalysis [12]. Several methods were developed to introduce the phosphine functionality to organic molecules. The reaction of organometallics

• with chlorophosphines, the reaction of metal phosphides with haloalkanes, and transition-metal-catalyzed cross-coupling reactions to form C–P bonds are the most widely used methods for the synthesis of phosphines [13][14]. Since phosphines are easily oxidized to phosphine oxides, the addition of

Self-assembled coordination thioether silver(I) macrocyclic complexes for homogeneous catalysis

• Zhen Cao,
• Aline Lacoudre,
• Cybille Rossy and
• Brigitte Bibal

Beilstein J. Org. Chem. 2019, 15, 2465–2472, doi:10.3762/bjoc.15.239

• the presence of commercially available inexpensive salts (AgOTf, AgNO3) and eventually a (chiral) ligand. Such silver(I) complexes were prepared by using (bi)pyridine [19][23][24][25][26], phosphine [22][27][28][29][30], ditopic N/P [22] ligands and a few S/P and S/N ones [31][32][33][34]. None of the

Functionalization of 4-bromobenzo[c][2,7]naphthyridine via regioselective direct ring metalation. A novel approach to analogues of pyridoacridine alkaloids

• Benedikt C. Melzer,
• Alois Plodek and
• Franz Bracher

Beilstein J. Org. Chem. 2019, 15, 2304–2310, doi:10.3762/bjoc.15.222

• synthesis via an Heck-type palladium-catalysed reaction according to the method of Harayama [30] (Pd(II)acetate/tri(o-tolyl)phosphine/K2CO3) did not lead to the expected alkaloid 3. Also the radical procedure published by Markgraf et al. [31] using AIBN and Bu3SnH and a photochemical cyclization protocol we

Recent advances in transition-metal-catalyzed incorporation of fluorine-containing groups

• Xiaowei Li,
• Xiaolin Shi,
• Xiangqian Li and
• Dayong Shi

Beilstein J. Org. Chem. 2019, 15, 2213–2270, doi:10.3762/bjoc.15.218

• excellent yields with easy to separate byproducts. A year later, the same catalyst was employed for the nucleophilic fluorination of aryl bromides and iodides with AgF and KF [54]. Meanwhile, with a slight modification of the phosphine ligand, Buchwald developed a similar Pd(0) precatalyst [L2Pd]2(cod

• trifluoromethylation of vinyl triflates and nonaflates (Scheme 65). A variety of trifluoromethylated cyclohexenes were obtained using a catalyst system, which was composed of Pd(dba)2 or [(allyl)PdCl]2 and the monodentate biaryl phosphine ligand t-BuXPhos. Also, TMSCF3 and KF were more suitable to the

Azologization and repurposing of a hetero-stilbene-based kinase inhibitor: towards the design of photoswitchable sirtuin inhibitors

• Christoph W. Grathwol,
• Nathalie Wössner,
• Sören Swyter,
• Adam C. Smith,
• Enrico Tapavicza,
• Robert K. Hofstetter,
• Anja Bodtke,
• Manfred Jung and
• Andreas Link

Beilstein J. Org. Chem. 2019, 15, 2170–2183, doi:10.3762/bjoc.15.214

• a microwave reaction vessel 3a (1.01 g, 5.00 mmol, 1.00 equiv) was mixed with styrene (651 mg, 6.25 mmol, 1.25 equiv), tris(o-tolyl)phosphine (61 mg, 0.20 mmol, 0.04 equiv), Pd2(dba)3 (92 mg, 0.10 mmol, 0.02 equiv) and NEt3 (863 ΜL, 0.63 g, 6.25 mmol, 1.25 equiv) and suspended in anhydrous DMF (6 mL

• mmol, 1.00 equiv), 1-fluoro-4-vinylbenzene (550 mg, 4.50 mmol, 1.50 equiv), tris(o-tolyl)phosphine (183 mg, 0.60 mmol, 0.20 equiv), Pd2(dba)3 (67 mg, 0.30 mmol, 0.10 equiv) and NEt3 (1.25 mL, 9.00 mmol, 3.00 equiv) in anhydrous DMF (4 mL). The reaction was conducted at 140 °C for 1.5 h. The raw product

Recent advances on the transition-metal-catalyzed synthesis of imidazopyridines: an updated coverage

• Gagandeep Kour Reen,
• Ashok Kumar and
• Pratibha Sharma

Beilstein J. Org. Chem. 2019, 15, 1612–1704, doi:10.3762/bjoc.15.165

Switchable selectivity in Pd-catalyzed [3 + 2] annulations of γ-oxy-2-cycloalkenones with 3-oxoglutarates: C–C/C–C vs C–C/O–C bond formation

• Yang Liu,
• Julie Oble and
• Giovanni Poli

Beilstein J. Org. Chem. 2019, 15, 1107–1115, doi:10.3762/bjoc.15.107

• . The effect of the solvent was then assessed. While no reaction took place in CH3CN (Table 1, entry 3), DMF (Table 1, entry 4) and DMSO (Table 1, entry 5) allowed the formation of 4a in 66% and 75% yield, respectively. The use of another bidentate phosphine such as dppe gave no improvement (Table 1