Photoredox catalysis in nickel-catalyzed C–H functionalization

• Lusina Mantry,
• Rajaram Maayuri,
• Vikash Kumar and
• Parthasarathy Gandeepan

Beilstein J. Org. Chem. 2021, 17, 2209–2259, doi:10.3762/bjoc.17.143

• regioselectivities. In 2017, the Wu group reported a notable C(sp3)–H functionalization process with internal alkynes by means of photoredox nickel catalysis [107]. Within this study, they showed that the reaction of ethers, or amides with internal alkynes 60 in the presence of the combination of a catalytic amount

• -C(sp3)–H addition of ethers 9 to triisopropylsilyl (TIPS)-substituted alkynes 62 (Scheme 33) [108]. Notably, among the tested nickel salts, NiCl2·glyme gave superior outcomes than other nickel(II) salts or nickel(0) catalysts, indicating the essential role of chlorine. As to the scope of the

• . Proposed catalytic cycle for the nickel/photoredox-catalyzed methylation of (hetero)aryl chlorides using trimethyl orthoformate. Proposed mechanism for the photoredox nickel-catalyzed hydroalkylation of internal alkynes. Proposed mechanism for the photoredox nickel-catalyzed acylation of α-amino C(sp3)–H

Recent advances in the syntheses of anthracene derivatives

• Giovanni S. Baviera and
• Paulo M. Donate

Beilstein J. Org. Chem. 2021, 17, 2028–2050, doi:10.3762/bjoc.17.131

• alkynes [24][25]. Numerous synthetic routes have also been reported for the synthesis of anthraquinones [26][27][28][29]. On the other hand, preparative methods for dibenzo[a,h]anthracene derivatives are less common, mainly relying on the cyclization of the corresponding lactone derivative followed by

• -catalyzed reactions with alkynes Metal-catalyzed reactions with alkynes have gained attention in the last years and have provided new methodologies to prepare anthracene derivatives. In 2009, Miura and co-workers were the first to obtain substituted anthracenes selectively by homologations with

• substituted anthracenes by the regioselective oxidative benzannulation of 1-adamantyl-1-naphthylamines 10 with internal alkynes 11 (Scheme 2) [35]. To the best of our knowledge, this was the first successful example of rhodium-catalyzed benzannulation reactions of N-adamantyl-1-naphthylamines. Reactions of 10

On the application of 3d metals for C–H activation toward bioactive compounds: The key step for the synthesis of silver bullets

• Renato L. Carvalho,
• Amanda S. de Miranda,
• Mateus P. Nunes,
• Roberto S. Gomes,
• Guilherme A. M. Jardim and
• Eufrânio N. da Silva Júnior

Beilstein J. Org. Chem. 2021, 17, 1849–1938, doi:10.3762/bjoc.17.126

• benzylic, allylic, 3°, 2°, and 1° aliphatic, using unsubstituted linear sulfamate esters (Scheme 17A and B) [130]. This method is also compatible with substrates containing adjacent substituents like protected amines and tolerates the presence of electron-withdrawing groups as well as α-substituted alkynes

Sustainable manganese catalysis for late-stage C–H functionalization of bioactive structural motifs

• Jongwoo Son

Beilstein J. Org. Chem. 2021, 17, 1733–1751, doi:10.3762/bjoc.17.122

• selectivity, which is observed at the more electron-rich and the less sterically hindered position. Manganese-catalyzed late-stage C–H alkynylation Alkynes are invaluable intermediates in organic synthesis and are conventionally prepared via palladium-catalyzed cross-coupling reactions [62]. Moreover, they

• 31n, regarded as a potentially viable peptide-based biosensor. Manganese-catalyzed inter- and intramolecular C–H alkenylations Manganese(I)-catalyzed C–H alkenylation of 2-phenylpyridines or N-pyridinylindoles with alkynes is characterized by proximity-induced C–H activation through chelation

• -NH tryptophan. Notably, alkenylative ligation of tryptophan-containing peptides and alkynes containing biomolecular motifs including sugar, menthol, or coumarin units was successful, delivering unprecedented hybrid complex peptides 34d–f in good yield. Based on the developed intermolecular process

Correction: Amine–borane complex-initiated SF₅Cl radical addition on alkenes and alkynes

• Audrey Gilbert,
• Pauline Langowski,
• Marine Delgado,
• Laurent Chabaud,
• Mathieu Pucheault and
• Jean-François Paquin

Beilstein J. Org. Chem. 2021, 17, 1725–1726, doi:10.3762/bjoc.17.120

• graphical abstract is shown in Scheme 2. We apologize for any inconvenience caused. Corrected Scheme 4 of the original article. Scope of the Et3B and the DICAB-initiated SF5Cl additions on alkynes. Unless noted otherwise, isolated yields are reported. aYield estimated by 19F NMR analysis of the crude

2,4-Bis(arylethynyl)-9-chloro-5,6,7,8-tetrahydroacridines: synthesis and photophysical properties

• Najeh Tka,
• Mohamed Adnene Hadj Ayed,
• Mourad Ben Braiek,
• Mahjoub Jabli,
• Noureddine Chaaben,
• Kamel Alimi,
• Stefan Jopp and
• Peter Langer

Beilstein J. Org. Chem. 2021, 17, 1629–1640, doi:10.3762/bjoc.17.115

• molecules have been examined. Additionally, theoretical studies based on density functional theory (DFT/B3LYP/6-31G(d)) were carried out. Keywords: alkynes; catalysis; cross-coupling; heterocycles; palladium; Introduction The development and design of small π-conjugated molecules have attracted increasing

A recent overview on the synthesis of 1,4,5-trisubstituted 1,2,3-triazoles

• Pezhman Shiri,
• Ali Mohammad Amani and
• Thomas Mayer-Gall

Beilstein J. Org. Chem. 2021, 17, 1600–1628, doi:10.3762/bjoc.17.114

• applications of these five-membered N-heterocycles are the result of both their easy synthetic procedures and ring functionalization [9][31][32]. Typically, 1,2,3-triazole derivatives are prepared via a 1,3-dipolar cycloaddition reaction between azides and alkynes [33]. It is worth noting that the metal

• cyclization reactions between alkynes and nitrogen sources for the synthesis of triazoles has been presented by Zeni and Neto. This review focuses on the preparation of disubstituted triazoles. However, the synthetic routes of a few 1,4,5-trisubstituted 1,2,3-triazoles have been displayed in this review [34

• 1,2,3-triazoles through multicomponent reactions and the relevant mechanistic aspects have been surveyed by Chen, Ren, et al. [27]. The 1,3-dipolar cycloaddition reaction between azides and alkynes is the most efficient pathway for the preparation of disubstituted 1,2,3-triazole derivatives. The copper

Copper-mediated oxidative C−H/N−H activations with alkynes by removable hydrazides

• Feng Xiong,
• Bo Li,
• Chenrui Yang,
• Liang Zou,
• Wenbo Ma,
• Linghui Gu,
• Ruhuai Mei and
• Lutz Ackermann

Beilstein J. Org. Chem. 2021, 17, 1591–1599, doi:10.3762/bjoc.17.113

• Institute for Sustainable Chemistry (WISCh), Georg-August-Universität Göttingen, Tammannstraße 2, 37077 Göttingen, Germany 10.3762/bjoc.17.113 Abstract The efficient copper-mediated oxidative C–H alkynylation of benzhydrazides was accomplished with terminal alkynes. Thus, a heteroaromatic removable N-2

• context, You [25], Huang [26], Liu [27], Li [28], and co-workers elegantly disclosed copper-mediated/catalyzed cascade C−H alkynylation and annulation with terminal alkynes to afford 3-methyleneisoindolinone derivatives, through the assistance of 8-aminoquinoline [29] or 2-aminophenyl-1H-pyrazole [30

• -catalyzed C−H activations with the MHP auxiliary [41][42][43][44]. In continuation of studies on sustainable 3d transition metal-catalyzed C−H activation [41][42][43][44][45][46][47][48][49], we have now discovered a robust copper-promoted oxidative C−H/N−H functionalization with terminal alkynes (Figure 1d

Synthesis of 1-indolyl-3,5,8-substituted γ-carbolines: one-pot solvent-free protocol and biological evaluation

• Premansh Dudhe,
• Mena Asha Krishnan,
• Kratika Yadav,
• Diptendu Roy,
• Krishnan Venkatasubbaiah,
• Biswarup Pathak and
• Venkatesh Chelvam

Beilstein J. Org. Chem. 2021, 17, 1453–1463, doi:10.3762/bjoc.17.101

• extreme thermal conditions with the use of corrosive reagents. Much later, Larock and co-workers developed a Pd/Cu-catalyzed imino-annulation of internal alkynes [15], which paved the way for transition-metal-catalyzed cyclizations as easy access to these scaffolds. Notably, the gold-catalyzed tandem

Double-headed nucleosides: Synthesis and applications

• Vineet Verma,
• Jyotirmoy Maity,
• Vipin K. Maikhuri,
• Ritika Sharma,
• Himal K. Ganguly and
• Ashok K. Prasad

Beilstein J. Org. Chem. 2021, 17, 1392–1439, doi:10.3762/bjoc.17.98

• 148 was then 5′-O-dimethoxytritylated in the presence of DMTrCl (4,4′-dimethoxytrityl chloride) and pyridine. The 5′-O-dimethoxytritylated nucleoside 149 was further coupled with terminal alkynes 150a–d under Sonogashira conditions to afford the double-headed nucleosides 151a–d (Scheme 38) [24

Fritsch–Buttenberg–Wiechell rearrangement of magnesium alkylidene carbenoids leading to the formation of alkynes

• Tsutomu Kimura,
• Koto Sekiguchi,
• Akane Ando and
• Aki Imafuji

Beilstein J. Org. Chem. 2021, 17, 1352–1359, doi:10.3762/bjoc.17.94

• treated with organometallic reagents to evaluate which combination of sulfoxides and organometallic reagents yielded alkynes the most efficiently. The use of 1-chlorovinyl p-tolyl sulfoxide and isopropylmagnesium chloride was optimal for this purpose. A variety of 1-chlorovinyl p-tolyl sulfoxides were

• prepared from carbonyl compounds and chloromethyl p-tolyl sulfoxide and were converted into alkynes via the sulfoxide/magnesium exchange reaction and subsequent Fritsch–Buttenberg–Wiechell (FBW) rearrangement of the resulting magnesium alkylidene carbenoids. The mechanism of the FBW rearrangement of

• magnesium alkylidene carbenoids was studied by using 13C-labeled sulfoxides and by using DFT calculations. Keywords: alkyne; 1-chlorovinyl p-tolyl sulfoxide; DFT calculation; Fritsch–Buttenberg–Wiechell rearrangement; magnesium alkylidene carbenoid; Introduction Alkynes are important compounds in organic

A comprehensive review of flow chemistry techniques tailored to the flavours and fragrances industries

• Guido Gambacorta,
• James S. Sharley and
• Ian R. Baxendale

Beilstein J. Org. Chem. 2021, 17, 1181–1312, doi:10.3762/bjoc.17.90

Highly regio- and stereoselective phosphinylphosphination of terminal alkynes with tetraphenyldiphosphine monoxide under radical conditions

• Dat Phuc Tran,
• Yuki Sato,
• Yuki Yamamoto,
• Shin-ichi Kawaguchi,
• Shintaro Kodama,
• Akihiro Nomoto and
• Akiya Ogawa

Beilstein J. Org. Chem. 2021, 17, 866–872, doi:10.3762/bjoc.17.72

• reactivities. The method using V-40 as an initiator is successfully investigated for the regio- and stereoselective phosphinylphosphination of terminal alkynes giving the corresponding trans-isomers of 1-diphenylphosphinyl-2-diphenylthiophosphinyl-1-alkenes in good yields. The protocol can be applied to a wide

• variety of terminal alkynes including both alkyl- and arylalkynes. Keywords: (E)-1,2-bis(diphenylphosphino)ethylene derivative; radical addition; stereoselective phosphinylphosphination; terminal alkyne; tetraphenyldiphosphine monoxide; Introduction Organophosphorus compounds are an essential class of

• 1,2-bis(diphenylphosphino)ethylenes, we have recently been conducting systematic research on the radical addition of P–P bond compounds to unsaturated carbon–carbon bonds [38][39][40][41][42][43][44]. Early studies have found that the radical addition of tetraphenyldiphosphine (Ph2PPPh2) to alkynes

Microwave-assisted multicomponent reactions in heterocyclic chemistry and mechanistic aspects

• Shivani Gulati,
• Stephy Elza John and
• Nagula Shankaraiah

Beilstein J. Org. Chem. 2021, 17, 819–865, doi:10.3762/bjoc.17.71

Synthetic reactions driven by electron-donor–acceptor (EDA) complexes

• Zhonglie Yang,
• Yutong Liu,
• Kun Cao,
• Xiaobin Zhang,
• Hezhong Jiang and
• Jiahong Li

Beilstein J. Org. Chem. 2021, 17, 771–799, doi:10.3762/bjoc.17.67

• , Lakhdar and colleagues [10] obtained the target product 3 with LED (5 W) irradiation of a solution containing arylphosphine oxide 2, alkynes 1, eosin Y (EY, 4 mol %), N-ethoxy-2-methylpyridinium (4), and sodium bicarbonate in DMF (Scheme 2). As a distinct example of EDA complexes, the process efficiency

• depends on the association of eosin Y and oxidant 4 to a donor–acceptor EY–4 ground-system complex (high reactivity). Due to the ability of aryl groups to stabilize the formed alkenyl radical, this protocol could control regioselectivity efficiently with unsymmetrical alkynes. In addition, EPR

• unactivated olefins and alkynes. This approach employed 68 and Togni reagent 69 (electron acceptor) as substrates, NMM as electron donor, and pyrrolidin-2-one as solvent to give hydrotrifluoromethylated product 70 at room temperature (Scheme 24). CF3 was added to a variety of terminal alkenes, leading to

Synthesis of β-triazolylenones via metal-free desulfonylative alkylation of N-tosyl-1,2,3-triazoles

• Soumyaranjan Pati,
• Renata G. Almeida,
• Eufrânio N. da Silva Júnior and
• Irishi N. N. Namboothiri

Beilstein J. Org. Chem. 2021, 17, 762–770, doi:10.3762/bjoc.17.66

• azides and alkynes [14][15]. However, the formation of the nitrogenated azoles by the classical Huisgen methodology is slow due to its high activation energies and also lack of regiochemical control, in general, leading to a mixture of 1,4- and 1,5-regioisomers of 1,2,3-triazoles. Later, Sharpless and

• -triazoles with alkynes and Rh catalysed N1 and N2 selective alkylations [24][25]. As for metal-free approaches, besides synthesizing N-alkylated triazoles via 1,3-dipolar cycloaddition of alkyl azide with enols generated from carbonyl compounds under transition metal-free conditions [26], a direct

• alternative approach for the synthesis of such triazole moiety 3a is the [3 + 2] cycloaddition between alkynes and the corresponding azides. However, the major disadvantage of such a strategy is the use of 3-azidoenone which is difficult to handle owing to its explosive nature. Therefore, our method provides

Effective microwave-assisted approach to 1,2,3-triazolobenzodiazepinones via tandem Ugi reaction/catalyst-free intramolecular azide–alkyne cycloaddition

• Maryna O. Mazur,
• Oleksii S. Zhelavskyi,
• Eugene M. Zviagin,
• Svitlana V. Shishkina,
• Vladimir I. Musatov,
• Maksim A. Kolosov,
• Elena H. Shvets,
• Anna Yu. Andryushchenko and
• Valentyn A. Chebanov

Beilstein J. Org. Chem. 2021, 17, 678–687, doi:10.3762/bjoc.17.57

• harder while the microwave-assisted catalyst-free conditions were effective for both terminal and non-terminal alkynes. Keywords: click chemistry; microwave chemistry; multicomponent reactions; triazolobenzodiazepines; Ugi reaction; Introduction Benzannulated heterocycles are among the most important

• and yield. Quantitative yields were also observed when N-phenyl (6abb) and N-benzyl (6aeb) propiolamides were subjected to the cyclization (see results on Scheme 5). Performing the IAAC for internal alkynes under non-catalyzed conditions is more challenging due to the reduced reactivity of the triple

• bond. Usually, AAC reactions on non-terminal alkynes are performed with ruthenium catalysis [21] that determined our decision to start screening conditions using the chloro(cyclopentadienyl)bis(triphenylphosphine)ruthenium(II) complex ((Cp)Ru(PPh3)2Cl) as catalyst. However, carrying out the reaction

Synthesis of N-perfluoroalkyl-3,4-disubstituted pyrroles by rhodium-catalyzed transannulation of N-fluoroalkyl-1,2,3-triazoles with terminal alkynes

• Olga Bakhanovich,
• Viktor Khutorianskyi,
• Vladimir Motornov and
• Petr Beier

Beilstein J. Org. Chem. 2021, 17, 504–510, doi:10.3762/bjoc.17.44

• Prague, Czech Republic 10.3762/bjoc.17.44 Abstract The rhodium-catalyzed transannulation of N-perfluoroalkyl-1,2,3-triazoles with aromatic and aliphatic terminal alkynes under microwave heating conditions afforded N-perfluoroalkyl-3,4-disubstituted pyrroles (major products) and N-fluoroalkyl-2,4

• -disubstituted pyrroles (minor products). The observed selectivities in the case of the reactions with aliphatic alkynes were high. Keywords: pyrrole; transannulation; rhodium carbene; triazole; Introduction Pyrroles are known to be important structural moieties appearing in natural products, synthetic drugs

• , conveniently prepared by [3 + 2] cycloadditions of terminal alkynes with sulfonyl azides, have been used as the precursors to N-sulfonylindoles by transition-metal-catalyzed transannulation reactions. In the presence of Rh(II) or Ni(0) catalysts the triazole ring-opening takes place and intermediate highly

The preparation and properties of 1,1-difluorocyclopropane derivatives

• Kymbat S. Adekenova,
• Peter B. Wyatt and
• Sergazy M. Adekenov

Beilstein J. Org. Chem. 2021, 17, 245–272, doi:10.3762/bjoc.17.25

• reaction of 54 with AlCl3 and an alkene at −20 °C (Scheme 22). The difluorocyclopropane 55 was obtained in 75% yield [63]. A bis(trifluoromethyl)zinc reagent was employed as the difluorocarbene source for the gem-difluorocyclopropanation of alkenes or alkynes via thermal decomposition [64]. The reagent was

• alkynylation of cyclopropanes 161 with terminal alkynes that led to the formation of the isomeric fluorinated enynes 164 and 165. Shortly before, a Pd-catalyzed ring-opening sulfonylation of gem-difluorocyclopropanes with the formation of 2-fluoroallylic sulfones 166 has been reported (Scheme 71) [122]. The

Selective synthesis of α-organylthio esters and α-organylthio ketones from β-keto esters and sodium S-organyl sulfurothioates under basic conditions

• Jean C. Kazmierczak,
• Roberta Cargnelutti,
• Thiago Barcellos,
• Claudio C. Silveira and
• Ricardo F. Schumacher

Beilstein J. Org. Chem. 2021, 17, 234–244, doi:10.3762/bjoc.17.24

• synthesis and medicinal chemistry. In the last years, different methods have been developed to prepare these classes of molecules, which includes the reaction of alkynes [39][40][41][42][43] as well as α-halogenated [44][45] and α-diazo carbonyl compounds [46][47][48][49] with thiols, diorganyl disulfides

1,2,3-Triazoles as leaving groups in S_NAr–Arbuzov reactions: synthesis of C6-phosphonated purine derivatives

• Kārlis-Ēriks Kriķis,
• Irina Novosjolova,
• Anatoly Mishnev and
• Māris Turks

Beilstein J. Org. Chem. 2021, 17, 193–202, doi:10.3762/bjoc.17.19

• chlorine at the purine C2 position by azide, and 3) copper-catalyzed azide–alkyne 1,3-dipolar cycloaddition (CuAAC) with different alkynes. Pathway B included: 1) the two-step synthesis of 2,6-bistriazolylpurine derivatives 6 from 2,6-dichloropurine derivative 1 [22] and 2) the SNAr–Arbuzov reaction with

• (OEt)3 Next, we switched to pathway B (Scheme 2) and prepared 2,6-diazidopurine derivative 5 from 2,6-dichloropurine (11) via a Mitsunobu alkylation and SNAr reaction with NaN3 (Scheme 5) [22]. 2,6-Bistriazolylpurine derivatives 6a–i were obtained in CuAAC reactions with various alkynes in 35–76% yield

Synthesis, crystal structures and properties of carbazole-based [6]helicenes fused with an azine ring

• Daria I. Tonkoglazova,
• Anna V. Gulevskaya,
• Konstantin A. Chistyakov and
• Olga I. Askalepova

Beilstein J. Org. Chem. 2021, 17, 11–21, doi:10.3762/bjoc.17.2

• acid as a cyclizing agent [72]. Unfortunately, only in the case of compound 9c, heating in trifluoroacetic acid led to isomerization into the required carbazole-based [6]helicene 10c (Table 5, entry 3). Under these conditions, alkynes 9a and 9b produced an unseparable mixture of some products. To our

Silver-catalyzed synthesis of β-fluorovinylphosphonates by phosphonofluorination of aromatic alkynes

• Yajing Zhang,
• Qingshan Tian,
• Guozhu Zhang and
• Dayong Zhang

Beilstein J. Org. Chem. 2020, 16, 3086–3092, doi:10.3762/bjoc.16.258

• 200032, P. R. China 10.3762/bjoc.16.258 Abstract A silver-catalyzed three-component reaction involving alkynes, Selectfluor®, and diethyl phosphite was employed for the one-pot formation of C(sp2)–F and C(sp2)–P bonds to provide an efficient access to β-fluorovinylphosphonates in a highly regio- and

• stereoselective manner under mild reaction conditions. This reaction is operationally simple and offers an excellent functional group tolerance as well as a broad substrate scope that includes both terminal and internal alkynes. The reaction proceeded through the oxidative generation of a P-centered radical and

• . Among the strategies for constructing diverse alkenes containing two-heteroatom bonds, such as disulfonylation [14][15][16], heterohalogenation [17][18][19][20], bis(trifluoromethyl)thiolation [21], and phosphorylation [22], the direct heterodifunctionalization of alkynes using three-component reactions

Amine–borane complex-initiated SF₅Cl radical addition on alkenes and alkynes

• Audrey Gilbert,
• Pauline Langowski,
• Marine Delgado,
• Laurent Chabaud,
• Mathieu Pucheault and
• Jean-François Paquin

Beilstein J. Org. Chem. 2020, 16, 3069–3077, doi:10.3762/bjoc.16.256

• , France 10.3762/bjoc.16.256 Abstract The SF5Cl radical addition on unsaturated compounds was performed using an air-stable amine–borane complex as the radical initiator. This method showed to be complementary to the classic Et3B-mediated SF5Cl addition on alkenes and alkynes. A total of seven alkene and

• addition of SF5Cl on alkenes and alkynes (Scheme 1) [29][30]. This strategy represented a tremendous step forward in the pentafluorosulfanyl aliphatic chemistry, since it addressed the drawbacks that were previously reported with the use of SF5Cl as a reagent. It allows the SF5Cl addition to occur in the

• SF5Cl to produce a chloroalkane as well as the key SF5• radical. The propagation steps would occur exactly as reported by Dolbier and co-workers for the Et3B-mediated radical addition of SF5Cl on alkenes and alkynes [29][30]. Overall, while similar mechanistically, the use of an amine–borane complex as

Regioselective synthesis of heterocyclic N-sulfonyl amidines from heteroaromatic thioamides and sulfonyl azides

• Vladimir Ilkin,
• Vera Berseneva,
• Tetyana Beryozkina,
• Tatiana Glukhareva,
• Lidia Dianova,
• Wim Dehaen,
• Eugenia Seliverstova and
• Vasiliy Bakulev

Beilstein J. Org. Chem. 2020, 16, 2937–2947, doi:10.3762/bjoc.16.243

• commonly used methods to prepare these compounds include the Cu-catalyzed multicomponent reaction of alkynes, sulfonyl azides and amines [23][24][25][26][27][28][29][30][31], the reaction of thioacetamide derivatives and cyclic thioamides with sulfonyl azides [22][32][33], the chlorophosphite-mediated