Selective ring-opening metathesis polymerization (ROMP) of cyclobutenes. Unsymmetrical ladderphane containing polycyclobutene and polynorbornene strands

• Yuan-Zhen Ke,
• Shou-Ling Huang,
• Guoqiao Lai and
• Tien-Yau Luh

Beilstein J. Org. Chem. 2019, 15, 44–51, doi:10.3762/bjoc.15.4

• and the olefinic proton of unreacted norbornene pendants, respectively. In the 13C NMR spectrum, the peak at δ 139 ppm owing to the olefinic carbon of cyclobutene shifts to δ 130 ppm due to ring opening, whereas the olefin carbon of the unreacted norbornene moiety at δ 136 ppm remained unchanged after

• (Figures S8–S10). The rate constants were thus obtained (Figures S1 and S2). Strategy for sequential ROMP of 1 to yield 3. ROMP of 4 and 5 in THF at 0 °C in the presence of 10 mol % of 6. Retrosynthesis of 8 from 9. Synthesis of monomer 9. Synthesis of 14 and 8 by selective olefin metathesis

Ruthenium-based olefin metathesis catalysts with monodentate unsymmetrical NHC ligands

• Veronica Paradiso,
• Chiara Costabile and
• Fabia Grisi

Beilstein J. Org. Chem. 2018, 14, 3122–3149, doi:10.3762/bjoc.14.292

• Veronica Paradiso Chiara Costabile Fabia Grisi Dipartimento di Chimica e Biologia “Adolfo Zambelli”, Università di Salerno, Via Giovanni Paolo II 132, I-84084 Fisciano, Salerno, Italy 10.3762/bjoc.14.292 Abstract An overview on the catalytic properties of ruthenium complexes for olefin metathesis

• bearing monodentate unsymmetrical N-heterocyclic diaminocarbene ligands is provided. The non-symmetric nature of these NHC architectures strongly influences activity and selectivity of the resulting catalysts. The main achievements that have been accomplished in significant areas of olefin metathesis up

• to the current state of research are discussed. Keywords: ligand design; olefin metathesis; ruthenium catalysts; selectivity; unsymmetrical N-heterocyclic carbenes; Introduction The transition metal-catalyzed olefin metathesis reaction is an indispensable synthetic tool for the construction of new

Cross metathesis-mediated synthesis of hydroxamic acid derivatives

• Shital Kumar Chattopadhyay,
• Subhankar Ghosh and
• Suman Sil

Beilstein J. Org. Chem. 2018, 14, 3070–3075, doi:10.3762/bjoc.14.285

• Shital Kumar Chattopadhyay Subhankar Ghosh Suman Sil Department of Chemistry, University of Kalyani, Kalyani - 741235, West Bengal, India, Fax: +91+33+25828282 10.3762/bjoc.14.285 Abstract An alternative synthesis of α,ß-unsaturated hydroxamates via cross metathesis between a class-I olefin and N

• advantage. In continuation of our earlier studies [26][27] on HDAC inhibitors, we herein report a direct access to α,ß-unsaturated hydroxamates through cross-metathesis reaction. Results and Discussion It is known that a CM reaction between a class-I olefin and a class-II olefin proceeds better in the

• metathesis Grubbs’ second generation catalyst G-II (10 mg, 2 mol %), was added to a stirred solution of the olefin 4a (158 mg, 1.13 mmol), and olefin 5 (100 mg, 0.56 mmol), in anhydrous and degassed CH2Cl2 (3 mL) at rt and the reaction mixture was heated to reflux for 6 h under argon atmosphere. The

Degenerative xanthate transfer to olefins under visible-light photocatalysis

• Atsushi Kaga,
• Xiangyang Wu,
• Joel Yi Jie Lim,
• Hirohito Hayashi,
• Yunpeng Lu,
• Edwin K. L. Yeow and
• Shunsuke Chiba

Beilstein J. Org. Chem. 2018, 14, 3047–3058, doi:10.3762/bjoc.14.283

• is initiated through triplet-sensitization of xanthates by the long-lived triplet state of the iridium-based photocatalyst. Keywords: energy transfer; olefin; photocatalysis; radical; xanthate; Introduction A degenerative radical transfer of xanthates to olefins has been developed as a robust

• ]. After irradiation of the mixture of xanthate 1a and olefin 2b under optimal reaction conditions with blue LED light irradiation for 4 h (Scheme 3), product 3ab was obtained in 58% yield. This is consistent with 12 equivalents of xanthate adduct 3ab produced per photon absorbed by the photocatalyst 8 (Φ

• ). Notably, the photocatalytically cleavable aryl bromide (Table 3, entry 2) and the α-chlorocarbonyl moiety (Table 3, entry 6) were also stable under the current reaction conditions [62][63]. Furthermore, double addition of bisxanthate 1h was successfully achieved in the presence of 5 equiv of olefin 2b

A tutorial review of stereoretentive olefin metathesis based on ruthenium dithiolate catalysts

• Daniel S. Müller,
• Olivier Baslé and
• Marc Mauduit

Beilstein J. Org. Chem. 2018, 14, 2999–3010, doi:10.3762/bjoc.14.279

• Daniel S. Muller Olivier Basle Marc Mauduit Univ. Rennes, Ecole Nationale Supérieure de Chimie de Rennes, CNRS, ISCR – UMR 6226, F-35000 Rennes, France 10.3762/bjoc.14.279 Abstract Stereoretentive olefin metathesis based on ruthenium dithiolate complexes has become a very active field of research

• dithiolate catalysts in a logic manner, thus providing an "operators handbook" for chemists who wish to apply this methodology in synthesis. Keywords: catalysis; olefin metathesis; ruthenium; stereoretentive; Review 1 Catalyst discovery and structure optimization from 2013–2018 In stereoretentive

• corresponding Z-olefin is indicated. Given the high stereoisomeric purity of the obtained products we can expect many other examples to be reported in the near future. Conclusion Within only a few years the field of stereoretentive metathesis using ruthenium dithiolate catalysts has attained a remarkable level

Ring-closing-metathesis-based synthesis of annellated coumarins from 8-allylcoumarins

• Christiane Schultze and
• Bernd Schmidt

Beilstein J. Org. Chem. 2018, 14, 2991–2998, doi:10.3762/bjoc.14.278

• /cyclization sequence. They serve as a versatile platform for the annellation of five- to seven-membered rings using ring-closing olefin metathesis (RCM). Furano-, pyrano-, oxepino- and azepinocoumarins were synthesized from the same set of precursors using Ru-catalyzed double bond isomerizations and RCM in a

• defined order. One class of products, pyrano[2,3-f]chromene-2,8-diones, were inaccessible through direct RCM of an acrylate, but became available from the analogous allyl ether via an assisted tandem catalytic RCM/allylic oxidation sequence. Keywords: coumarins; heterocycles; isomerization; olefin

• contribution we report how 8-allylcoumarins obtained through the microwave-promoted tandem sequence can be elaborated into heteroannellated coumarins that are either natural products or close ring-expanded analogues, using ring-closing olefin metathesis (RCM) reactions. Precedence for the use of RCM [40] in

The activity of indenylidene derivatives in olefin metathesis catalysts

• Maria Voccia,
• Steven P. Nolan,
• Luigi Cavallo and
• Albert Poater

Beilstein J. Org. Chem. 2018, 14, 2956–2963, doi:10.3762/bjoc.14.275

• turnover event of an olefin metathesis reaction using a new family of homogenous Ru-based catalysts bearing modified indenylidene ligands has been investigated, using methoxyethylene as a substrate. The study is carried out by means of density functional theory (DFT). The indenylidene ligands are decorated

• significant role. Keywords: activation; IMes; indenylidene; olefin metathesis; SIMes; Introduction Olefin metathesis has been an intensely studied reaction due to its wide use [1], in industrial applications, especially in petrochemistry [2], i.e., the Phillips Triolefin (PTP) process or the Shell Higher

• Olefin Process (SHOP) [3][4]. Additionally, the olefin metathesis reaction has provided a useful tool in polymerisation [5][6], as well as in the pharmaceutical industry in the formation of C=C bonds. Early catalyst examples were ill-defined entities and it is not until Grubbs [7] and Schrock [8

MoO₃ on zeolites MCM-22, MCM-56 and 2D-MFI as catalysts for 1-octene metathesis

• Hynek Balcar,
• Martin Kubů,
• Naděžda Žilková and
• Mariya Shamzhy

Beilstein J. Org. Chem. 2018, 14, 2931–2939, doi:10.3762/bjoc.14.272

• Hynek Balcar Martin Kubu Nadezda Zilkova Mariya Shamzhy J. Heyrovský Institute of Physical Chemistry of the Czech Academy of Sciences, v.v.i., Dolejškova 3, 182 23 Prague 8, Czech Republic 10.3762/bjoc.14.272 Abstract Highly active olefin metathesis catalysts were prepared by thermal spreading

• MoO3 and/or MoO2(acac)2 on MWW zeolites (MCM-22, delaminated MCM-56) and on two-dimensional MFI (all in NH4+ form). The catalysts‘ activities were tested in the metathesis of neat 1-octene (as an example of a longer chain olefin) at 40 °C. Catalysts with 6 wt % or 5 wt % of Mo were used. The acidic

• . Moreover, for related system based on tungsten oxide in zeolite, it was suggested using high resolution STEM that Brønsted acid sites in proximity to metathesis active sites facilitate olefin adsorption and metallocycle formation [29]. Such mechanism may be effective also for Mo catalysts. The decrease in

The influence of the cationic carbenes on the initiation kinetics of ruthenium-based metathesis catalysts; a DFT study

• Magdalena Jawiczuk,
• Angelika Janaszkiewicz and
• Bartosz Trzaskowski

Beilstein J. Org. Chem. 2018, 14, 2872–2880, doi:10.3762/bjoc.14.266

• steric and electronic properties can be easily controlled and tuned to obtain very efficient and specific catalysts. One of the most successful uses of NHCs in catalysis is the olefin metathesis, which nowadays became one of the most commonly used tool in modern synthesis [8][9][10]. The vast popularity

• ligands have been synthesized and used in catalysis [19][20][21]. With respect to olefin metathesis cationic carbenes have been introduced as early as in 2007, where Grubbs described the first ammonium-tagged Hoveyda-type catalyst [22]. The goal of that study was to develop systems that are active and

• by these results we decided to design similar systems with either SIMes or IMes and cationic carbenes. For all systems 1–3-GrII and 1–3-GrII_IMes the energy barriers of initiation are relatively high (30–40 kcal/mol, Scheme 4), indicating that these complexes are completely unsuitable for olefin

Olefin metathesis catalysts embedded in β-barrel proteins: creating artificial metalloproteins for olefin metathesis

• Daniel F. Sauer,
• Johannes Schiffels,
• Takashi Hayashi,
• Ulrich Schwaneberg and
• Jun Okuda

Beilstein J. Org. Chem. 2018, 14, 2861–2871, doi:10.3762/bjoc.14.265

• , Graduate School of Engineering, Osaka University, 2-1 Yamadaoka, Suita 565-0871, Japan 10.3762/bjoc.14.265 Abstract This review summarizes the recent progress of Grubbs–Hoveyda (GH) type olefin metathesis catalysts incorporated into the robust fold of β-barrel proteins. Anchoring strategies are discussed

• and challenges and opportunities in this emerging field are shown from simple small-molecule transformations over ring-opening metathesis polymerizations to in vivo olefin metathesis. Keywords: artificial metalloprotein; β-barrel protein; metathease; olefin metathesis; ruthenium; Introduction Olefin

• ]. According to the Chauvin mechanism, the catalytically active species are Schrock-type carbenes or alkylidenes [2]. Olefin metathesis greatly profited from the isolation of structurally well-defined metal alkylidene complexes [3][4]. The best studied and most commonly employed catalysts are based on Mo, W

Oxidative and reductive cyclization in stiff dithienylethenes

• Michael Kleinwächter,
• Ellen Teichmann,
• Lutz Grubert,
• Martin Herder and
• Stefan Hecht

Beilstein J. Org. Chem. 2018, 14, 2812–2821, doi:10.3762/bjoc.14.259

• DAEs without the geometric constraint of the central endocyclic olefin bridge yet with two rings each involving one of the bridge’s carbon atoms to lock the photoreactive antiparallel conformation and thus provide stiff dithienylethenes (sDTEs), in analogy to stiff stilbenes [30][31][32]. Due to

Synthesis of a tyrosinase inhibitor by consecutive ethenolysis and cross-metathesis of crude cashew nutshell liquid

• Jacqueline Pollini,
• Valentina Bragoni and
• Lukas J. Gooßen

Beilstein J. Org. Chem. 2018, 14, 2737–2744, doi:10.3762/bjoc.14.252

• of the anacardic acid component of CNSL presents several challenges. Since CNSL consists of a mixture of acids, phenols and resorcins with saturated and unsaturated side chains, it seemed to be impossible to derive a single product with a shorter side chain via a cross-metathesis with a short olefin

Photocatalyic Appel reaction enabled by copper-based complexes in continuous flow

• Clémentine Minozzi,
• Jean-Christophe Grenier-Petel,
• Shawn Parisien-Collette and
• Shawn K. Collins

Beilstein J. Org. Chem. 2018, 14, 2730–2736, doi:10.3762/bjoc.14.251

• corresponding dibromide could be formed from 1,9-nonadiol (6) in quantitative yield (99%, Table 1, entry 4). A sulfur-containing alcohol 7 was smoothly converted to its bromide in 99% yield (Table 1, entry 5). An allylic alcohol 8 having a cis-olefin underwent alcohol-to-halide conversion in 89% yield and was

Ring-opening metathesis of some strained bicyclic systems; stereocontrolled access to diolefinated saturated heterocycles with multiple stereogenic centers

• Zsanett Benke,
• Melinda Nonn,
• Márton Kardos,
• Santos Fustero and
• Loránd Kiss

Beilstein J. Org. Chem. 2018, 14, 2698–2707, doi:10.3762/bjoc.14.247

• opening of the heteroring, (Scheme 7). The process involves isomerization through olefin bond migration proceeding Z-selectively. Conclusion The ring-opening metathesis (ROM) of some ring-constrained, unsaturated bicyclic frameworks has been studied in the presence of commercially available ruthenium

• restricted derivatives are currently being studied by our group. Experimental General procedure for the ring-opening metathesis To a solution of bicyclic olefin derivative (150 mg) in anhydrous CH2Cl2 (20 mL) the catalyst (5 mol %) was added (see Tables) and the mixture was stirred at 20 °C in the presence

Synergistic approach to polycycles through Suzuki–Miyaura cross coupling and metathesis as key steps

• Sambasivarao Kotha,
• Milind Meshram and
• Chandravathi Chakkapalli

Beilstein J. Org. Chem. 2018, 14, 2468–2481, doi:10.3762/bjoc.14.223

• generated the cross-coupling product 22 (72%). Next, aldehyde 22 was subjected to Wittig olefination to provide the corresponding alkene 23 (69%), which on subsequent treatment with KOt-Bu in THF gave the isomerized product 24 (73%). Later, RCM of isomerized olefin 24 with the help of G-II catalyst offered

• 108 (89%). Then, MnO2 oxidation of compound 108 offered the keto derivative in 90% yield. Corey–Bakshi–Shibata (CBS) reduction of the resulting keto derivative produced the hydroxy compound 109 (85%, ee 98%). Eventually, hydroxy olefin 109 was subjected to Sharpless asymmetric epoxidation to generate

Efficient catalytic alkyne metathesis with a fluoroalkoxy-supported ditungsten(III) complex

• Henrike Ehrhorn,
• Janin Schlösser,
• Dirk Bockfeld and
• Matthias Tamm

Beilstein J. Org. Chem. 2018, 14, 2425–2434, doi:10.3762/bjoc.14.220

• bimetallic tungsten complex W2F3 and the alkylidyne complex WPhF3. In contrast, Mo2F6 displayed no significant activity in alkyne metathesis. Keywords: alkylidyne complexes; alkyne metathesis; catalysis; terminal alkynes; tungsten; Introduction While the field of olefin metathesis has seen significant

• were initially based on a design strategy inspired by the structure of highly active olefin metathesis catalysts, the Schrock-type molybdenum and tungsten alkylidene complexes [13][14][15]. Imidazolin-2-iminato ligands were used to modify Schrock-type alkylidyne complexes, resulting in new active

Stereoselective total synthesis and structural revision of the diacetylenic diol natural products strongylodiols H and I

• Pamarthi Gangadhar,
• Sayini Ramakrishna,
• Ponneri Venkateswarlu and
• Pabbaraja Srihari

Beilstein J. Org. Chem. 2018, 14, 2313–2320, doi:10.3762/bjoc.14.206

• to Wittig olefination reaction with triphenylphosphonium salt of n-nonyl bromide 15 in presence of n-BuLi to produce the corresponding Z-olefin 28 exclusively in 83% yield. Di-desilylation of compound 28 was easily achieved with n-tetrabutylammonium fluoride to furnish the target molecule

• , prepared earlier in our group [24], to furnish the corresponding Z-olefin 29 exclusively in 81% yield. Exposure of 29 to n-tetrabutylammonium fluoride provided the natural product (S)-strongylodiol I (10a) in 82% yield (Scheme 6). The analytical data and specific rotation of the synthetic product were

Hydroarylations by cobalt-catalyzed C–H activation

• Rajagopal Santhoshkumar and
• Chien-Hong Cheng

Beilstein J. Org. Chem. 2018, 14, 2266–2288, doi:10.3762/bjoc.14.202

• , whereas the IPr·HCl ligand provided tetrahydropyridoindoles 31 in reasonable regioselectivity (Scheme 22) [70]. Remarkably, the regioselectivity of the reaction is not only controlled by the steric effect of NHC ligand, but also depends on the olefin tether in 29. Recently, Petit and co-workers also

Cobalt-catalyzed nucleophilic addition of the allylic C(sp³)–H bond of simple alkenes to ketones

• Tsuyoshi Mita,
• Masashi Uchiyama,
• Kenichi Michigami and
• Yoshihiro Sato

Beilstein J. Org. Chem. 2018, 14, 2012–2017, doi:10.3762/bjoc.14.176

• involving catalytic C–C bond construction with the double bond of terminal alkenes (e.g., Heck reaction, hydrometalation followed by functionalization, carbometalation, and olefin metathesis) [10][11][12][13]. However, direct C–C bond formation of the allylic C(sp3)–H bond adjacent to double bonds has

• to 1.5 equiv further improved the yield of 3aa to 54% yield (Table 1, entry 4). The moderate yield was attributed to the generation of the olefin isomerization product derived from 1a (vide infra). We then changed the equivalents of reagents 1a and 2a. Although the yield of 3aa was decreased when the

• tautomerized to η1-allylcobalt(III) III by the assistance of the oxygen atom in the Xantphos ligand [30]. When using α-olefin as a substrate, the cobalt atom should be located at the terminal position due to the avoidance of steric repulsion between the bulky Xantphos ligand and an alkyl substitution (similar

Diazirine-functionalized mannosides for photoaffinity labeling: trouble with FimH

• Femke Beiroth,
• Tomas Koudelka,
• Thorsten Overath,
• Stefan D. Knight,
• Andreas Tholey and
• Thisbe K. Lindhorst

Beilstein J. Org. Chem. 2018, 14, 1890–1900, doi:10.3762/bjoc.14.163

• olefin formation through abstraction of α-H atoms. Therefore, aryl(trifluoromethyl)diazirines were introduced, which lack hydrogen atoms in α-position of the diazirine function and consequently do not form olefins. Thus, aryl(trifluoromethyl)diazirines have become reagents of first choice for

Synthesis of new tricyclic 5,6-dihydro-4H-benzo[b][1,2,4]triazolo[1,5-d][1,4]diazepine derivatives by [3⁺ + 2]-cycloaddition/rearrangement reactions

• Lin-bo Luan,
• Zi-jie Song,
• Zhi-ming Li and
• Quan-rui Wang

Beilstein J. Org. Chem. 2018, 14, 1826–1833, doi:10.3762/bjoc.14.155

• –rearrangement protocol proved to be quite general and has also been conducted intramolecularly for a tethered olefin moiety by Brewer and co-workers in recent years [40][41][42]. In the present work, motivated to achieve structural diversity and potential biological profile improvement of 1,4-benzodiazepines

Recent advances in hypervalent iodine(III)-catalyzed functionalization of alkenes

• Xiang Li,
• Pinhong Chen and
• Guosheng Liu

Beilstein J. Org. Chem. 2018, 14, 1813–1825, doi:10.3762/bjoc.14.154

• -olefin functionalization via C–C and C–O bond formation, in which electron-rich aromatic groups and vinylogous esters acting as independent nucleophiles to provide oxabicyclo[3.2.1]octanes (Scheme 17) [71]. Mechanistically, the olefin is activated by iodine(III) to form species 57 which is followed by

β-Hydroxy sulfides and their syntheses

• Mokgethwa B. Marakalala,
• Edwin M. Mmutlane and
• Henok H. Kinfe

Beilstein J. Org. Chem. 2018, 14, 1668–1692, doi:10.3762/bjoc.14.143

• below. 3.3.1 Acetoxysulfenylation using copper acetate. Bewick et al. reported a copper(II)-catalyzed synthesis of β-hydroxy sulfides from the reaction of cyclohexene/open-chain olefin with the basic disulfides, namely: 2,2’-dipyridyl disulfide and bis(2-aminophenyl) disulfide [68]. The intermediate 90

The phenyl vinyl ether–methanol complex: a model system for quantum chemistry benchmarking

• Dominic Bernhard,
• Fabian Dietrich,
• Mariyam Fatima,
• Cristóbal Pérez,
• Hannes C. Gottschalk,
• Axel Wuttke,
• Ricardo A. Mata,
• Martin A. Suhm,
• Melanie Schnell and
• Markus Gerhards

Beilstein J. Org. Chem. 2018, 14, 1642–1654, doi:10.3762/bjoc.14.140

• or nitrogen lone pairs, or R–H∙∙∙π binding motifs (R = O, N, C, S,…) involving aromatic π systems. Less often, R–H∙∙∙π bound complexes are found involving nonconjugated, localized C=C double bonds. Exceptions include the ethene–methanol complex [24] as well as bulky olefin–tert-butyl alcohol

Hypervalent organoiodine compounds: from reagents to valuable building blocks in synthesis

• Gwendal Grelier,
• Benjamin Darses and
• Philippe Dauban

Beilstein J. Org. Chem. 2018, 14, 1508–1528, doi:10.3762/bjoc.14.128

• same syn:anti ratio while 1,4-addition products containing an (E)-olefin are selectively obtained from dienes. The authors have also shown that the reaction performed in the presence of a stoichiometric amount of p-TsOH gives β-trifluoromethylstyrene derivatives instead of the expected oxy

• -trifluoromethyl compound. The benzoyloxy-trifluoromethylation of dienes has also been reported with CuCN as the catalyst. The reaction, again, is selective with respect to the olefin geometry – (E)-alkenes are exclusively obtained – and the regioselectivity – products resulting from a sterically-controlled 1,4

• products 46 resulting from a 1,2-benzoyloxyiodination and isolated with moderate to excellent yields (Scheme 15). The reaction is believed to take place through the formation of a hypoiodous species that activates the olefin via an iodonium intermediate. Tandem catalytic couplings Diaryliodonium compounds