Sequential two-step, one-pot microwave-assisted Urech synthesis of 5-monosubstituted hydantoins from L-amino acids in water

• Wei-Jin Chang,
• Sook Yee Liew,
• Thomas Kurz and
• Siow-Ping Tan

Beilstein J. Org. Chem. 2025, 21, 596–600, doi:10.3762/bjoc.21.46

• of this process is promising, driven by its simplicity, moderate to high yields, and the use of environmentally friendly reagents. Notably, microwave-assisted one-pot reactions eliminate the need for column chromatography, a common step in traditional purification methods but limits scalability

Recent advances in organocatalytic atroposelective reactions

• Henrich Szabados and
• Radovan Šebesta

Beilstein J. Org. Chem. 2025, 21, 55–121, doi:10.3762/bjoc.21.6

• ]. Hayashi realized an organocatalytic domino sequence that afforded axially chiral biaryls [24]. The transformation relied on an organocatalytic Michael/Henry cascade. The enamine-type Michael addition was catalyzed by the Hayashi–Jørgensen organocatalyst C7 (Scheme 6). Then, a series of one-pot reactions

• was carried out to provide the final biaryl products 17. In a related strategy, Hayashi´s team realized an organocatalytic Michael/aldol cascade leading to chiral dihydronaphthalene derivatives 20a–e [25]. Through a series of one-pot reactions, aromatization was achieved with concomitant central-to

Deuterated reagents in multicomponent reactions to afford deuterium-labeled products

• Kevin Schofield,
• Shayna Maddern,
• Yueteng Zhang,
• Grace E. Mastin,
• Rachel Knight,
• Wei Wang,
• James Galligan and
• Christopher Hulme

Beilstein J. Org. Chem. 2024, 20, 2270–2279, doi:10.3762/bjoc.20.195

• (MCRs) are one-pot reactions that utilize three or more readily available starting materials [1][2][3][4]. Typically, MCRs use reactive functional groups such as ketones or aldehydes, carboxylic acids, amines, and isocyanides where these simple building blocks can be utilized to form large libraries of

Multicomponent syntheses of pyrazoles via (3 + 2)-cyclocondensation and (3 + 2)-cycloaddition key steps

• Ignaz Betcke,
• Alissa C. Götzinger,
• Maryna M. Kornet and
• Thomas J. J. Müller

Beilstein J. Org. Chem. 2024, 20, 2024–2077, doi:10.3762/bjoc.20.178

• ; one-pot reactions; pyrazole; Introduction Pyrazoles and 1,2-diazoles [1] have received considerable interest in the past years. Although they are rarely found in nature [2], their spectrum of biological activity is remarkably broad, leading to numerous applications in pharmaceutical chemistry [3][4

One-pot Ugi-azide and Heck reactions for the synthesis of heterocyclic systems containing tetrazole and 1,2,3,4-tetrahydroisoquinoline

• Jiawei Niu,
• Yuhui Wang,
• Shenghu Yan,
• Yue Zhang,
• Xiaoming Ma,
• Qiang Zhang and
• Wei Zhang

Beilstein J. Org. Chem. 2024, 20, 912–920, doi:10.3762/bjoc.20.81

• purification. Thus, to the solution of crude 5a dissolved in MeCN (3 mL) were added 10 mol % of Pd(OAc)2, 20 mol % of PPh3, and 2 equiv of K2CO3 and the mixture stirred for 3 h at 105 °C under N2 atmosphere to give the desired product 6a in 60% isolated yield (entry 17 in Table 1). With the optimized one-pot

• reactions in hands, we next evaluated the substrate scope by synthesizing 11 derivatives (Scheme 4) using nine benzaldehydes 1, two isonitriles or ethyl isocyanoacetate 4, allylamine hydrochloride (2), and trimethylsilyl azide (3) for the initial Ugi-azide reaction. Among them, products 6a and 6b from the

HPW-Catalyzed environmentally benign approach to imidazo[1,2-a]pyridines

• Luan A. Martinho and
• Carlos Kleber Z. Andrade

Beilstein J. Org. Chem. 2024, 20, 628–637, doi:10.3762/bjoc.20.55

• ][21][22]. Multicomponent reactions (MCRs) provide one-pot reactions, simple synthetic procedures, less waste being produced, fewer purification steps, and a high atom economy [23]. The GBB three-component reaction is carried out in the presence of Lewis or Brønsted acid catalysis to increase the

Catalytic multi-step domino and one-pot reactions

• Svetlana B. Tsogoeva

Beilstein J. Org. Chem. 2024, 20, 254–256, doi:10.3762/bjoc.20.25

• steps, which is superior to conventional organic synthesis. The Thematic Issue “Catalytic multi-step domino and one-pot reactions” in the Beilstein Journal of Organic Chemistry, which I had the pleasure to edit, covers the recent strategies of domino reactions and one-pot syntheses and presents the

Metal-catalyzed coupling/carbonylative cyclizations for accessing dibenzodiazepinones: an expedient route to clozapine and other drugs

• Amina Moutayakine and
• Anthony J. Burke

Beilstein J. Org. Chem. 2024, 20, 193–204, doi:10.3762/bjoc.20.19

• the reaction time to 1 h. Interestingly, we noticed that in the initial one-pot reactions indicated in Table 1, the yields of the diarylamine 3a were better when Mo(CO)6 was present (compare entry 4, Table 1 to entry 7, Table 2). This might be due to (a) the fact that the temperature used for the

One-pot nucleophilic substitution–double click reactions of biazides leading to functionalized bis(1,2,3-triazole) derivatives

• Hans-Ulrich Reissig and
• Fei Yu

Beilstein J. Org. Chem. 2023, 19, 1399–1407, doi:10.3762/bjoc.19.101

• . One-pot reaction employing enantiopure alkynyl-substituted 1,2-oxazin-4-one derivative 6 leading to 1,2,3-triazole 7. One-pot reactions of dihalides 8 and 11 with sodium azide and alkyne 2 leading to symmetric divalent bis(1,2,3-triazoles) 9 and 12 as major products. One-pot reactions employing

One-pot double annulations to confer diastereoselective spirooxindolepyrrolothiazoles

• Juan Lu,
• Bin Yao,
• Desheng Zhan,
• Zhuo Sun,
• Yun Ji and
• Xiaofeng Zhang

Beilstein J. Org. Chem. 2022, 18, 1607–1616, doi:10.3762/bjoc.18.171

• one-pot reactions were also developed by Zhang using the 4-aminoquinoline synthesis, for example, in amino acids(esters)-based [3 + 2] cycloadditions [38][39][40][41][42][43][44][45][46][47][48] and in the synthesis of pyrrolidine-containing systems [49][50][51][52][53][54][55][56][57][58][59

• one-pot reactions with recyclable organocatalysts [69]. Notably, we conferred K10 acid to promote the C–H activation in the synthesis of spirooxindolepyrrolidines, and used Zeolite HY catalyst to synthesize diastereoselective dispiro[oxindolepyrrolidine]s with a butterfly shape (Scheme 1A and 1B) [70

One-pot synthesis of 2-arylated and 2-alkylated benzoxazoles and benzimidazoles based on triphenylbismuth dichloride-promoted desulfurization of thioamides

• Arisu Koyanagi,
• Yuki Murata,
• Shiori Hayakawa,
• Mio Matsumura and
• Shuji Yasuike

Beilstein J. Org. Chem. 2022, 18, 1479–1487, doi:10.3762/bjoc.18.155

• with various carbonyl compounds, such as carboxylic acid derivatives or aldehydes [6][7][8][9]. These classic reactions require harsh conditions, such as using strong acids or high temperatures. The syntheses of azoles using one-pot reactions are attracting increasing attention as alternatives to

Synthesis of novel alkynyl imidazopyridinyl selenides: copper-catalyzed tandem selenation of selenium with 2-arylimidazo[1,2-a]pyridines and terminal alkynes

• Mio Matsumura,
• Kaho Tsukada,
• Kiwa Sugimoto,
• Yuki Murata and
• Shuji Yasuike

Beilstein J. Org. Chem. 2022, 18, 863–871, doi:10.3762/bjoc.18.87

• attention [15][19][20][21][22][23][24][25][26]. This method involves a transition-metal-catalyzed one-pot, three-component reaction in which two functional groups are simultaneously introduced on the Se atom via double selenation. As examples, the following Cu-catalyzed one-pot reactions have been reported

• selenides [25]. In this reaction, unlike the former, bis(imidazo[1,2-a]pyridin-3-yl) diselenides are generated through C–H selenation at the 3-position of 2-arylimidazopyridines with Se powder, followed by the cross-coupling reaction between diselenides and triarylbismuthines. These one-pot reactions are

Synthetic strategies of phosphonodepsipeptides

• Jiaxi Xu

Beilstein J. Org. Chem. 2021, 17, 461–484, doi:10.3762/bjoc.17.41

• -aminoalkanesulfonamides by using this strategy. Also side-chain functionalized phosphonodepsipeptides 160 were prepared in satisfactory yields directly through the one-pot reactions of benzyl carbamate (154), aldehydes 155, and diethyl (R,R)-2-chloro-1,3,2-dioxaphospholane-4,5-dicarboxylate (159), which was synthesized

Et₃N/DMSO-supported one-pot synthesis of highly fluorescent β-carboline-linked benzothiophenones via sulfur insertion and estimation of the photophysical properties

• Dharmender Singh,
• Vipin Kumar and
• Virender Singh

Beilstein J. Org. Chem. 2020, 16, 1740–1753, doi:10.3762/bjoc.16.146

• found to be slow reacting and produced 2aA in a lower yield (42%). From the perspective of green chemistry, one-pot reactions are preferred as less waste is generated due to the avoidance of work-up, isolation, and purification of intermediates [66]. Accordingly, the feasibility of a one-pot synthesis

One-pot synthesis of isosorbide from cellulose or lignocellulosic biomass: a challenge?

• Isaline Bonnin,
• Raphaël Mereau,
• Thierry Tassaing and
• Karine De Oliveira Vigier

Beilstein J. Org. Chem. 2020, 16, 1713–1721, doi:10.3762/bjoc.16.143

• for the observed unique kinetics, yields and selectivity in these one-pot reactions. In addition, such in-depth fundamental mechanistic and kinetic studies should enable determining the key structural parameters of the catalytic platform that govern its efficiency hence supporting the design of novel

Synthesis of pyrrolidinedione-fused hexahydropyrrolo[2,1-a]isoquinolines via three-component [3 + 2] cycloaddition followed by one-pot N-allylation and intramolecular Heck reactions

• Xiaoming Ma,
• Suzhi Meng,
• Xiaofeng Zhang,
• Qiang Zhang,
• Shenghu Yan,
• Yue Zhang and
• Wei Zhang

Beilstein J. Org. Chem. 2020, 16, 1225–1233, doi:10.3762/bjoc.16.106

• ]isoquinolines. The multicomponent reaction was combined with one-pot reactions to make a synthetic method with good pot, atom and step economy. MeCN was used as a preferable green solvent for the reactions. Keywords: [3 + 2] cycloaddition; Heck reaction; hexahydropyrrolo[2,1-a]isoquinoline; one-pot reactions

• achieved by the combination of a three-component reaction with one-pot reactions. This synthetic sequence is a new addition of our [3 + 2] cycloaddition-initiated reactions for making diverse cyclic scaffolds. Experimental General procedure for the synthesis of pyrrolidine adducts 5 A solution of amino

• via sequential 1,3-dipolar cycloaddition, N-allylation, and intramolecular Heck cyclization reactions [50][51][52][53][54] (Scheme 2, K). Both stabilized and non-stabilized azomethine ylides could be used for the initial [3 + 2] cycloaddition. A multicomponent reaction was combined with one-pot

α-Photooxygenation of chiral aldehydes with singlet oxygen

• Dominika J. Walaszek,
• Magdalena Jawiczuk,
• Jakub Durka,
• Olga Drapała and
• Dorota Gryko

Beilstein J. Org. Chem. 2019, 15, 2076–2084, doi:10.3762/bjoc.15.205

• substituents into an aldehydes’ structure. Interestingly, to the best of our knowledge, there are no reports on ‘one-pot’ reactions leading to difunctionalization at both α and β-positions. To this end, in subsequent experiments, we attempted to merge two photochemical processes: β-benzylation (according to

Transition metal-free oxidative and deoxygenative C–H/C–Li cross-couplings of 2H-imidazole 1-oxides with carboranyl lithium as an efficient synthetic approach to azaheterocyclic carboranes

• Lidia A. Smyshliaeva,
• Mikhail V. Varaksin,
• Pavel A. Slepukhin,
• Oleg N. Chupakhin and
• Valery N. Charushin

Beilstein J. Org. Chem. 2018, 14, 2618–2626, doi:10.3762/bjoc.14.240

• 10.3762/bjoc.14.240 Abstract The direct C–H functionalization methodology has first been applied to perform transition metal-free C–H/C–Li cross-couplings of 2H-imidazole 1-oxides with carboranyllithium. This atom- and step-economical approach, based on one-pot reactions of nucleophilic substitution of

Coordination-driven self-assembly vs dynamic covalent chemistry: versatile methods for the synthesis of molecular metallarectangles

• Li-Li Ma,
• Jia-Qin Han,
• Wei-Guo Jia and
• Ying-Feng Han

Beilstein J. Org. Chem. 2018, 14, 2027–2034, doi:10.3762/bjoc.14.178

• cages based on half-sandwich ruthenium could be obtained in one-pot reactions from simple building blocks [38][39]. This finding prompted us to investigate whether condensation reactions between amines and 4-formylpyridine can be used simultaneously with coordination bond formation to construct

• metallarectangle structures in one-pot reactions, thereby reducing both waste and the number of reaction steps. In this work we successfully combine coordination-driven self-assembly and dynamic covalent chemistry through imine bond formation between amines and 4-formylpyridine to construct the desired rectangular

Synthesis of structurally diverse 3,4-dihydropyrimidin-2(1H)-ones via sequential Biginelli and Passerini reactions

• Andreas C. Boukis,
• Baptiste Monney and
• Michael A. R. Meier

Beilstein J. Org. Chem. 2017, 13, 54–62, doi:10.3762/bjoc.13.7

• precursor components. MCRs are often one-pot reactions with high-atom economy, convergence and efficiency. Generally, one-pot procedures have many advantages compared to multiple-step syntheses [1][2][3]. One-pot MCRs can shorten reaction times, provide high yields, reduce work-up steps and waste as well as

Synthesis of polyhydroxylated decalins via two consecutive one-pot reactions: 1,4-addition/aldol reaction followed by RCM/syn-dihydroxylation

• Michał Malik and
• Sławomir Jarosz

Beilstein J. Org. Chem. 2016, 12, 2602–2608, doi:10.3762/bjoc.12.255

• -dihydroxylation. The stereochemical outcome of these reactions is discussed. Keywords: carbasugars; one-pot reactions; ring-closing metathesis; syn-dihydroxylation; Introduction Derivatives of carbohydrates, in which the endocyclic oxygen atom is replaced with a methylene group are known as carbasugars [1]. Due

Stereoselective synthesis of fused tetrahydroquinazolines through one-pot double [3 + 2] dipolar cycloadditions followed by [5 + 1] annulation

• Xiaofeng Zhang,
• Kenny Pham,
• Shuai Liu,
• Marc Legris,
• Alex Muthengi,
• Jerry P. Jasinski and
• Wei Zhang

Beilstein J. Org. Chem. 2016, 12, 2204–2210, doi:10.3762/bjoc.12.211

• formaldehyde through [5 + 1] annulation to afford a novel polycyclic scaffold bearing tetrahydroquinazoline, pyrrolidine, pyrrolidinedione, and N-substituted maleimide in stereoselective fashion. Keywords: [5 + 1] annulation; [3 + 2] cycloaddition; one-pot reactions; stereoselective synthesis

• ; tetrahydroquinazoline; Introduction The synthesis of new molecules with potential biological activity through pot, atom and step-economic (PASE) reactions is an attractive green organic technique [1][2][3][4][5]. By the combination of multicomponent reactions (MCR) [6][7][8][9][10][11] with stepwise one-pot reactions

• second [3 + 2] cycloaddition of azide compounds 2 with maleimides and sequential denitrogenation to products 7 is proposed in Scheme 2. 1,5-Diamino compounds 7 generated by one-pot reactions are good substrates for [5 + 1] annulation with aldehydes to form tetrahydroquinazolines 1 [34][35]. After

Potent triazine-based dehydrocondensing reagents substituted by an amido group

• Munetaka Kunishima,
• Daiki Kato,
• Nobu Kimura,
• Masanori Kitamura,
• Kohei Yamada and
• Kazuhito Hioki

Beilstein J. Org. Chem. 2016, 12, 1897–1903, doi:10.3762/bjoc.12.179

• evaluate the reactivity of these chlorotriazines in amide-forming reactions, one-pot reactions were performed (Table 1a), i.e., the chlorotriazines were added to a mixture of carboxylic acid 1a, amine 2a, and NMM in MeOH or THF at room temperature. The amide-forming reaction in the absence of NMM did not

Three-component synthesis of highly functionalized aziridines containing a peptide side chain and their one-step transformation into β-functionalized α-ketoamides

• Lena Huck,
• Juan F. González,
• Elena de la Cuesta and
• J. Carlos Menéndez

Beilstein J. Org. Chem. 2016, 12, 1772–1777, doi:10.3762/bjoc.12.166

• . Their transformation into β-trifluoroacetamido-α-ketoamide and α,β-diketoamide frameworks was also achieved in a single step. Keywords: α-ketoamides; aziridines; multicomponent reactions; nitrogen heterocycles; one-pot reactions; peptide mimics; vicinal tricarbonyl compounds; Introduction Aziridine

Synthesis of β-arylated alkylamides via Pd-catalyzed one-pot installation of a directing group and C(sp³)–H arylation

• Yunyun Liu,
• Yi Zhang,
• Xiaoji Cao and
• Jie-Ping Wan

Beilstein J. Org. Chem. 2016, 12, 1122–1126, doi:10.3762/bjoc.12.108

• .12.108 Abstract The synthesis of β-arylated alkylamides via alkyl C–H bond arylation has been realized by means of direct one-pot reactions of acyl chlorides, aryl iodides and 8-aminoquinoline. Depending on the structure of the starting materials, both single and double β-arylated alkylamides could be