Enhancing higher-order modal response in multifrequency atomic force microscopy with a coupled cantilever system

• Wendong Sun,
• Jianqiang Qian,
• Yingzi Li,
• Yanan Chen,
• Zhipeng Dou,
• Rui Lin,
• Peng Cheng,
• Xiaodong Gao,
• Quan Yuan and
• Yifan Hu

Beilstein J. Nanotechnol. 2024, 15, 694–703, doi:10.3762/bjnano.15.57

• , Chinese Academy of Sciences, Dalian 116023, P. R. China 10.3762/bjnano.15.57 Abstract Multifrequency atomic force microscopy (AFM) utilizes the multimode operation of cantilevers to achieve rapid high-resolution imaging and extract multiple properties. However, the higher-order modal response of

Sidewall angle tuning in focused electron beam-induced processing

• Sangeetha Hari,
• Willem F. van Dorp,
• Johannes J. L. Mulders,
• Piet H. F. Trompenaars,
• Pieter Kruit and
• Cornelis W. Hagen

Beilstein J. Nanotechnol. 2024, 15, 447–456, doi:10.3762/bjnano.15.40

• simply varying the etch position on the sidewall using the top view SE image for reference, the slope of the deposit can be tuned from negative (outward) to positive (inward). The evolution has been studied in detail by high-resolution imaging in a TEM. A surprising trend not indicated by the simple

Enhanced feedback performance in off-resonance AFM modes through pulse train sampling

• Mustafa Kangül,
• Navid Asmari,
• Santiago H. Andany,
• Marcos Penedo and
• Georg E. Fantner

Beilstein J. Nanotechnol. 2024, 15, 134–143, doi:10.3762/bjnano.15.13

• at frequencies far away from the resonance frequency of the cantilever (off-resonance tapping (ORT) modes) can provide high-resolution imaging of a wide range of sample types, including biological samples, soft polymers, and hard materials. These modes offer precise and stable control of vertical

Two-dimensional molecular networks at the solid/liquid interface and the role of alkyl chains in their building blocks

• Suyi Liu,
• Yasuo Norikane and
• Yoshihiro Kikkawa

Beilstein J. Nanotechnol. 2023, 14, 872–892, doi:10.3762/bjnano.14.72

• flat conducting substrates, such as metal surfaces and highly oriented pyrolytic graphite (HOPG), under ultrahigh vacuum (UHV) conditions, at solid/air or solid/liquid interfaces [23][24][25][26][27][28]. Although UHV-STM offers high-resolution imaging, it requires large, complex, and expensive

The steep road to nonviral nanomedicines: Frequent challenges and culprits in designing nanoparticles for gene therapy

• Yao Yao,
• Yeongun Ko,
• Grant Grasman,
• Jeffery E. Raymond and
• Joerg Lahann

Beilstein J. Nanotechnol. 2023, 14, 351–361, doi:10.3762/bjnano.14.30

• intracellular trafficking [23]. In the absence of imaging flow cytometry, a two-pronged approach (high-resolution imaging plus a separate high-throughput analysis) is recommended to ensure the highest confidence in the result. Our literature assessment also revealed an increasing preference among the community

Single-step extraction of small-diameter single-walled carbon nanotubes in the presence of riboflavin

• Polina M. Kalachikova,
• Anastasia E. Goldt,
• Eldar M. Khabushev,
• Timofei V. Eremin,
• Timofei S. Zatsepin,
• Elena D. Obraztsova,
• Konstantin V. Larionov,
• Liubov Yu. Antipina,
• Pavel B. Sorokin and
• Albert G. Nasibulin

Beilstein J. Nanotechnol. 2022, 13, 1564–1571, doi:10.3762/bjnano.13.130

• -resolution imaging of specific tissues [29]. Notably, single-step extraction of carbon nanotubes in an aqueous media without surfactants or organic additives can significantly shorten the path from industrial or laboratory reactors to in vitro and in vivo biomedical research and further. Conclusion We

• such as melanoma, luminal 45 A breast cancer, and squamous cell carcinoma. Riboflavin-covered SWCNTs have immense potential in detecting tumors since riboflavin is selectively attached to the riboflavin carrier protein in the tumor cells while the photoluminescence increased by SWCNTs allows for high

Hierachical epicuticular wax coverage on leaves of Deschampsia antarctica as a possible adaptation to severe environmental conditions

• Elena V. Gorb,
• Iryna A. Kozeretska and
• Stanislav N. Gorb

Beilstein J. Nanotechnol. 2022, 13, 807–816, doi:10.3762/bjnano.13.71

• . antarctica plant, which are usually exposed to the environment, using cryo scanning electron microscopy (cryo-SEM) allowing for a high-resolution imaging of frozen and fractured samples in native condition, that is, without treatment in strong solvents, such as ethanol or acetone, usually needed in the

Sodium doping in brookite TiO₂ enhances its photocatalytic activity

• Boxiang Zhuang,
• Honglong Shi,
• Honglei Zhang and
• Zeqian Zhang

Beilstein J. Nanotechnol. 2022, 13, 599–609, doi:10.3762/bjnano.13.52

• wafer pasted on an aluminum sample holder by a carbon conducting resin. The EDX spectra were acquired from individual morphologies or grains in the samples. Electron diffraction and high-resolution imaging experiments were carried out on a high-resolution transmission electron microscope (JEOL JEM-2100

Two dynamic modes to streamline challenging atomic force microscopy measurements

• Alexei G. Temiryazev,
• Andrey V. Krayev and
• Marina P. Temiryazeva

Beilstein J. Nanotechnol. 2021, 12, 1226–1236, doi:10.3762/bjnano.12.90

• for scanning a large rough area with a probe oscillating at a low amplitude. In contrast, the use of ultrasharp probes allows for performing extremely high-resolution imaging (down to molecular resolution) when scanning small and relatively flat areas. Thus, with the same probe, we can pre-scan a

• large area, find specific locations and perform high-resolution scans. The technique of high-resolution imaging will be discussed in the next section. The VM avoids image artifacts associated with a sticking probe. In some cases, a sticking effect can be observed, when in the process of AFM imaging the

Influence of electrospray deposition on C₆₀ molecular assemblies

• Antoine Hinaut,
• Sebastian Scherb,
• Sara Freund,
• Zhao Liu,
• Thilo Glatzel and
• Ernst Meyer

Beilstein J. Nanotechnol. 2021, 12, 552–558, doi:10.3762/bjnano.12.45

• nanometers in size are observed, suggesting a limited influence of the HV-ESD method. The C60 molecules cover step edges and form monolayer islands, similar to TE. High-resolution imaging of the islands, shown in Figure 2c, confirms the hexagonal lattice arrangement of C60 with a lattice parameter close to 1

The patterning toolbox FIB-o-mat: Exploiting the full potential of focused helium ions for nanofabrication

• Victor Deinhart,
• Lisa-Marie Kern,
• Jan N. Kirchhof,
• Sabrina Juergensen,
• Joris Sturm,
• Enno Krauss,
• Thorsten Feichtner,
• Sviatoslav Kovalchuk,
• Michael Schneider,
• Dieter Engel,
• Bastian Pfau,
• Bert Hecht,
• Kirill I. Bolotin,
• Stephanie Reich and
• Katja Höflich

Beilstein J. Nanotechnol. 2021, 12, 304–318, doi:10.3762/bjnano.12.25

• ranging from several days to one or two months. For imaging and nanofabrication, only one of the three atoms is selected. This nearly ideal point source allows not only for high-resolution imaging but also for the milling of smallest geometric features [5][6][7]. Furthermore, large-area machining is

Extended iron phthalocyanine islands self-assembled on a Ge(001):H surface

• Rafal Zuzak,
• Marek Szymonski and
• Szymon Godlewski

Beilstein J. Nanotechnol. 2021, 12, 232–241, doi:10.3762/bjnano.12.19

• consider now high-resolution imaging analysis. Already within the STM image in Figure 3a, we can notice lobes that differ in their apparent height. The separation between differently bright nearest neighboring lobes, which reaches approximately 0.7 nm, suggests that they originate from the same molecule

TiO_x/Pt₃Ti(111) surface-directed formation of electronically responsive supramolecular assemblies of tungsten oxide clusters

• Marco Moors,
• Yun An,
• Agnieszka Kuc and
• Kirill Yu. Monakhov

Beilstein J. Nanotechnol. 2021, 12, 203–212, doi:10.3762/bjnano.12.16

• , theory-supported STM measurements at liquid nitrogen temperatures have been selected as an ideal characterization technique. This is due to the fact that it not only allows high-resolution imaging on the nanoscale, but the STM tip may also act as a charge-injecting or depleting electrode for the

Bio-imaging with the helium-ion microscope: A review

• Matthias Schmidt,
• James M. Byrne and
• Ilari J. Maasilta

Beilstein J. Nanotechnol. 2021, 12, 1–23, doi:10.3762/bjnano.12.1

• samples, rendering HIM a promising high-resolution imaging technique for biological samples. Starting with studies focused on medical research, the last decade has seen some particularly spectacular high-resolution images in studies focused on plants, microbiology, virology, and geomicrobiology. However

• will see some remarkable discoveries, especially as the combination of high-resolution imaging with nanoscale analytics becomes more widespread. Resolution and contrast mechanisms in the HIM The key to high-resolution imaging with a scanning microscope is a high-brilliance source of small size. In the

• ; ionofluorescense; Review Introduction Since its commercialisation in 2006 [1][2][3][4][5], the helium-ion microscope (HIM) has become a well-established tool for nanoscale imaging and nanoscale fabrication in physics and materials science. It is attractive for those applications as it combines high-resolution

Scanning transmission imaging in the helium ion microscope using a microchannel plate with a delay line detector

• Eduardo Serralta,
• Nico Klingner,
• Olivier De Castro,
• Michael Mousley,
• Santhana Eswara,
• Serge Duarte Pinto,
• Tom Wirtz and
• Gregor Hlawacek

Beilstein J. Nanotechnol. 2020, 11, 1854–1864, doi:10.3762/bjnano.11.167

• microscopy; scanning transmission ion microscopy; Introduction The helium ion microscope (HIM) is an instrument that has already proven its value for high-resolution imaging, compositional analysis, nanofabrication, and materials modification [1][2]. It generates a focused helium (or neon) ion beam with sub

Out-of-plane surface patterning by subsurface processing of polymer substrates with focused ion beams

• Serguei Chiriaev,
• Luciana Tavares,
• Vadzim Adashkevich,
• Arkadiusz J. Goszczak and
• Horst-Günter Rubahn

Beilstein J. Nanotechnol. 2020, 11, 1693–1703, doi:10.3762/bjnano.11.151

• -resolution imaging with a He+ ion-beam probe was performed using a very small beam current (below 0.1 pA) to minimize imaging artifacts from radiation damage generated by the probe beam. (a) AFM image and (b) the corresponding depth profile of a fragment of the surface depression produced in a 5 nm Pt60Pd40

• to avoid possible interactions between the irradiated areas, such as the overlaps originating from transverse ion straggle. The samples were characterized with AFM and HIM. The measurements of the surface height were performed with a Veeco Dimension 3100 AFM instrument in the tapping mode. High

Protruding hydrogen atoms as markers for the molecular orientation of a metallocene

• Linda Laflör,
• Michael Reichling and
• Philipp Rahe

Beilstein J. Nanotechnol. 2020, 11, 1432–1438, doi:10.3762/bjnano.11.127

• of the ferrocene moiety, herein on CaF2(111) surfaces, by using the protruding hydrogen atoms as markers. Keywords: calcium fluoride (CaF2); ferrocene; functionalised tips; high-resolution imaging; non-contact atomic force microscopy; Introduction It is still a challenge to determine the precise

Gold-coated plant virus as computed tomography imaging contrast agent

• Alaa A. A. Aljabali,
• Mazhar S. Al Zoubi,
• Khalid M. Al-Batanyeh,
• Ali Al-Radaideh,
• Mohammad A. Obeid,
• Abeer Al Sharabi,
• Walhan Alshaer,
• Bayan AbuFares,
• Tasnim Al-Zanati,
• Murtaza M. Tambuwala,
• Naveed Akbar and
• David J. Evans

Beilstein J. Nanotechnol. 2019, 10, 1983–1993, doi:10.3762/bjnano.10.195

• agent offer a fast scan time (less than 2 min), low cost, and biocompatibility and allow for high-resolution imaging with ca. 150 Hounsfield units (HU). The Au-CPMV surface was further modified allowing for the incorporation of targeting molecules of specific cell types. Keywords: biomedical imaging

Highly ordered mesoporous silica film nanocomposites containing gold nanoparticles for the catalytic reduction of 4-nitrophenol

• Mohamad Azani Jalani,
• Leny Yuliati,
• Siew Ling Lee and
• Hendrik O. Lintang

Beilstein J. Nanotechnol. 2019, 10, 1368–1379, doi:10.3762/bjnano.10.135

• 200 kV. For the TEM tomography, the sample was visualized using a Hitachi HT7700 instrument for high-resolution imaging at low accelerating voltage (80 kV) where the 3D reconstruction was performed using a Hitachi EMIP tomography acquisition. Thermogravimetric analysis (TGA) was performed using a

Nitrous oxide as an effective AFM tip functionalization: a comparative study

• Taras Chutora,
• Bruno de la Torre,
• Pingo Mutombo,
• Jack Hellerstedt,
• Jaromír Kopeček,
• Pavel Jelínek and
• Martin Švec

Beilstein J. Nanotechnol. 2019, 10, 315–321, doi:10.3762/bjnano.10.30

• characterize the adsorption of the N2O species on Au(111) by means of atomic force microscopy with CO-functionalized tips and density functional theory (DFT) simulations. Subsequently we devise a method of attaching a single N2O to a metal tip apex and benchmark its high-resolution imaging and spectroscopic

• capabilities using FePc molecules. Our results demonstrate the feasibility of high-resolution imaging. However, we find an inherent asymmetry of the N2O probe-particle adsorption on the tip apex, in contrast to a CO tip reference. These findings are consistent with DFT calculations of the N2O- and CO tip

Comparative biological effects of spherical noble metal nanoparticles (Rh, Pd, Ag, Pt, Au) with 4–8 nm diameter

• Alexander Rostek,
• Marina Breisch,
• Kevin Pappert,
• Kateryna Loza,
• Marc Heggen,
• Manfred Köller,
• Christina Sengstock and
• Matthias Epple

Beilstein J. Nanotechnol. 2018, 9, 2763–2774, doi:10.3762/bjnano.9.258

• with a sample volume of 750 µL were used. High-resolution imaging was performed using an aberration-corrected FEI Titan transmission electron microscope (TEM) equipped with a Cs-probe corrector (CEOS Company) and operating at 300 kV [53]. Cell biology Human mesenchymal stem cells (hMSC, 5th to 10th

High-throughput synthesis of modified Fresnel zone plate arrays via ion beam lithography

• Kahraman Keskinbora,
• Umut Tunca Sanli,
• Margarita Baluktsian,
• Corinne Grévent,
• Markus Weigand and
• Gisela Schütz

Beilstein J. Nanotechnol. 2018, 9, 2049–2056, doi:10.3762/bjnano.9.194

• writing/milling capability. IBL allows for rapid prototyping of high-resolution FZPs that can be used for high-resolution imaging at soft X-ray energies. Here, we discuss improvements in the process enabling us to write zones down to 15 nm in width, achieving an effective outermost zone width of 30 nm

• -resolution imaging and lithography at short wavelengths. Their fabrication requires nano-machining capabilities with exceptional precision and strict tolerances such as those enabled by modern lithography methods. In particular, ion beam lithography (IBL) is a noteworthy method thanks to its robust direct

• Kahraman Keskinbora Umut Tunca Sanli Margarita Baluktsian Corinne Grevent Markus Weigand Gisela Schutz Max Planck Institute for Intelligent Systems, Heisenbergstrasse 3, 70569 Stuttgart, Germany 10.3762/bjnano.9.194 Abstract Fresnel zone plates (FZP) are diffractive photonic devices used for high

Defect formation in multiwalled carbon nanotubes under low-energy He and Ne ion irradiation

• Santhana Eswara,
• Jean-Nicolas Audinot,
• Brahime El Adib,
• Maël Guennou,
• Tom Wirtz and
• Patrick Philipp

Beilstein J. Nanotechnol. 2018, 9, 1951–1963, doi:10.3762/bjnano.9.186

• -resolution imaging tool [32][33]. A He+ or Ne+ ion beam can be used to irradiated the samples with an impact energy in the range of 5 to 30 keV, either for imaging or nano-machining [34][35], or for doing both simultaneously [33]. For instance, the HIM has already been used for the imaging of graphene flakes

• directly related to the number of defects in CNTs [30], or X-ray photoelectron spectroscopy (XPS) which provides some information on the chemical environment of the carbon atoms [31]. In this context, it is to be noted that helium ion microscopy (HIM) has received increasing attention recently as a high

Quantitative comparison of wideband low-latency phase-locked loop circuit designs for high-speed frequency modulation atomic force microscopy

• Kazuki Miyata and
• Takeshi Fukuma

Beilstein J. Nanotechnol. 2018, 9, 1844–1855, doi:10.3762/bjnano.9.176

• imaging of calcite dissolution in water at 0.5 s/frame with true atomic resolution. The high-speed and high-resolution imaging capabilities of the proposed design will enable a wide range of studies to be conducted on various atomic-scale dynamic phenomena at solid–liquid interfaces. Keywords: calcite

• [1]. It has been used under ultrahigh vacuum conditions for high-resolution imaging of various materials, including metals, semiconductors, metal oxides, and organic molecules [2][3][4][5]. Furthermore, recent advances in FM-AFM have enabled atom manipulation and identification at room temperature [6

Electrostatically actuated encased cantilevers

• Benoit X. E. Desbiolles,
• Gabriela Furlan,
• Adam M. Schwartzberg,
• Paul D. Ashby and
• Dominik Ziegler

Beilstein J. Nanotechnol. 2018, 9, 1381–1389, doi:10.3762/bjnano.9.130

• ≈ 90 μm) with a stiffness of k = 4 N·m−1 and a resonance frequency of f0 = 144.525 kHz and Qair = 36.5 is used. After immersion in water the quality factor remained high Qwater = 27.4, which enables high-resolution imaging with small interaction forces in liquids. Moreover, the clean electrostatic

• small. However, in absence of a water meniscus for example when operating in vacuum or when immersed in liquid, small amplitudes (below 1 nm) are ideal to reach gentle and high-resolution imaging conditions. Yet, larger amplitudes can be obtained with softer cantilevers. For instance with the cantilever