Emerging strategies in the sustainable removal of antibiotics using semiconductor-based photocatalysts

• Yunus Ahmed,
• Keya Rani Dutta,
• Parul Akhtar,
• Md. Arif Hossen,
• Md. Jahangir Alam,
• Obaid A. Alharbi,
• Hamad AlMohamadi and
• Abdul Wahab Mohammad

Beilstein J. Nanotechnol. 2025, 16, 264–285, doi:10.3762/bjnano.16.21

• four distinct generations [52], each shedding light on the mechanisms of various photocatalysts used for pollutant degradation, namely, single-component transition metal oxides (TMOs) representing the first generation, doped TMOs, binary TMOs, and doped binary TMOs as the second generation, and

Nanoarchitectonics of photothermal materials to enhance the sensitivity of lateral flow assays

• Elangovan Sarathkumar,
• Rajasekharan S. Anjana and
• Ramapurath S. Jayasree

Beilstein J. Nanotechnol. 2023, 14, 988–1003, doi:10.3762/bjnano.14.82

• properties, that is, plasmonic materials (e.g., Au, Ag, and Pt), semiconductor materials (e.g., transition metal oxides, transition metal chalcogenides, and transition metal dichalcogenides), carbon-based nanomaterials (such as graphene oxide and carbon nanotubes), and polymer nanomaterials [33][34] (Figure

Solution combustion synthesis of a nanometer-scale Co₃O₄ anode material for Li-ion batteries

• Monika Michalska,
• Huajun Xu,
• Qingmin Shan,
• Shiqiang Zhang,
• Yohan Dall'Agnese,
• Yu Gao,
• Amrita Jain and
• Marcin Krajewski

Beilstein J. Nanotechnol. 2021, 12, 424–431, doi:10.3762/bjnano.12.34

• potential next-generation anodes. Among them, transition metal oxides (TMOs) have attracted particular attention because their capacities are significantly greater than those of carbonaceous electrode materials. Also, most of the TMOs are relatively inexpensive and easily accessible due to their high

• the formation of composite materials consisting of Co3O4 and different materials, including carbon-based materials, such as graphene [7][8], carbon nanotubes [9], carbon coatings [10], dictyophora indusiata-derived carbon [11], or other transition metal oxides [12]. This approach usually leads to a

Self-standing heterostructured NiC_x-NiFe-NC/biochar as a highly efficient cathode for lithium–oxygen batteries

• Shengyu Jing,
• Xu Gong,
• Shan Ji,
• Linhui Jia,
• Bruno G. Pollet,
• Sheng Yan and
• Huagen Liang

Beilstein J. Nanotechnol. 2020, 11, 1809–1821, doi:10.3762/bjnano.11.163

• fairly high ORR and OER activities. Significant progress has been made in the development of alternative ORR and OER catalysts, such as transition metal oxides [16][17][18], heteroatom-doped carbons [19][20], and transition metal nitrides and carbides [21][22][23]. Due to their surface physicochemical

Adsorption and self-assembly of porphyrins on ultrathin CoO films on Ir(100)

• Feifei Xiang,
• Tobias Schmitt,
• Marco Raschmann and
• M. Alexander Schneider

Beilstein J. Nanotechnol. 2020, 11, 1516–1524, doi:10.3762/bjnano.11.134

• islands on the 2BL film. The findings demonstrate the guiding effect of the cobalt oxide films of different thickness and the effect of functional surface anchoring. Keywords: adsorption energy; molecular rotors; porphyrins; self-assembly; transition metal oxides; Introduction Due to their variability

High-performance asymmetric supercapacitor made of NiMoO₄ nanorods@Co₃O₄ on a cellulose-based carbon aerogel

• Meixia Wang,
• Jing Zhang,
• Xibin Yi,
• Benxue Liu,
• Xinfu Zhao and
• Xiaochan Liu

Beilstein J. Nanotechnol. 2020, 11, 240–251, doi:10.3762/bjnano.11.18

• 84.0% after 2000 cycles. The impressive performance of the ASC device is attributed to the synergistic effect of the good conduction capability of the porous 3D structure derived from CA and the large specific capacitance contributed by the transition metal oxides. Our results suggest that the NiMoO4

A novel all-fiber-based LiFePO₄/Li₄Ti₅O₁₂ battery with self-standing nanofiber membrane electrodes

• Li-li Chen,
• Hua Yang,
• Mao-xiang Jing,
• Chong Han,
• Fei Chen,
• Xin-yu Hu,
• Wei-yong Yuan,
• Shan-shan Yao and
• Xiang-qian Shen

Beilstein J. Nanotechnol. 2019, 10, 2229–2237, doi:10.3762/bjnano.10.215

• environmental friendliness [11][12][13][14]. The electrode materials of conventional lithium-ion batteries (LIBs) are generally based on transition metal oxides containing lithium mixed evenly with conductive agents and adhesives. The electrode materials are then coated on metal current collectors [15][16][17

Ultrathin Ni_1−xCo_xS₂ nanoflakes as high energy density electrode materials for asymmetric supercapacitors

• Xiaoxiang Wang,
• Teng Wang,
• Rusen Zhou,
• Lijuan Fan,
• Shengli Zhang,
• Feng Yu,
• Tuquabo Tesfamichael,
• Liwei Su and
• Hongxia Wang

Beilstein J. Nanotechnol. 2019, 10, 2207–2216, doi:10.3762/bjnano.10.213

• of 3000 charge/discharge cycles at 10 A·g−1, Ni1−xCoxS2 retains 67% of its initial capacity, indicating a good cycling stability. The above results imply that this facile sulfurization method can be used as a universal method for enhancing the electrochemical performance of transition metal oxides

Improvement of the thermoelectric properties of a MoO₃ monolayer through oxygen vacancies

• Wenwen Zheng,
• Wei Cao,
• Ziyu Wang,
• Huixiong Deng,
• Jing Shi and
• Rui Xiong

Beilstein J. Nanotechnol. 2019, 10, 2031–2038, doi:10.3762/bjnano.10.199

• . Unfortunately, the application of conventional thermoelectric materials is still limited by inefficiency and problems with high-cost, stability and toxicity. As promising candidates to address these severe challenges, transition metal oxides (TMOs) provide a vast variety of low-cost and environmentally friendly

Facile synthesis of carbon nanotube-supported NiO//Fe₂O₃ for all-solid-state supercapacitors

• Shengming Zhang,
• Xuhui Wang,
• Yan Li,
• Xuemei Mu,
• Yaxiong Zhang,
• Jingwei Du,
• Guo Liu,
• Xiaohui Hua,
• Yingzhuo Sheng,
• Erqing Xie and
• Zhenxing Zhang

Beilstein J. Nanotechnol. 2019, 10, 1923–1932, doi:10.3762/bjnano.10.188

• are widely used in commercial supercapacitors [6][7][8][9]. Although they have a higher capacity than the conventional capacitors, their average energy density is low to about 10 Wh·kg−1 whereas batteries reach 200 Wh·kg−1. Transition metal oxides such as RuO2, MnO2, NiO, and Fe2O3 [10][11][12][13][14

Kelvin probe force microscopy work function characterization of transition metal oxide crystals under ongoing reduction and oxidation

• Dominik Wrana,
• Karol Cieślik,
• Wojciech Belza,
• Christian Rodenbücher,
• Krzysztof Szot and
• Franciszek Krok

Beilstein J. Nanotechnol. 2019, 10, 1596–1607, doi:10.3762/bjnano.10.155

• , Germany Peter Grünberg Institute (PGI-7), Forschungszentrum Jülich GmbH, 52425 Jülich, Germany August Chelkowski Institute of Physics, University of Silesia, 40–007 Katowice, Poland 10.3762/bjnano.10.155 Abstract Controlling the work function of transition metal oxides is of key importance with regard to

• method employing KPFM and local conductivity AFM for the characterization of the work function of transition metal oxides may help in understanding the impact of reduction and oxidation on electronic properties, which is of high importance in the development of effective sensing and catalytic devices

• . Keywords: Kelvin probe force microscopy (KPFM); reduction and oxidation; SrTiO3; TiO nanowires; TiO/SrTiO3 heterostructure; transition metal oxides; work function; Introduction Transition metal oxides are viewed today as some of the most promising materials in various fields, ranging from (photo)catalysis

Photoactive nanoarchitectures based on clays incorporating TiO₂ and ZnO nanoparticles

• Eduardo Ruiz-Hitzky,
• Pilar Aranda,
• Marwa Akkari,
• Nithima Khaorapapong and
• Makoto Ogawa

Beilstein J. Nanotechnol. 2019, 10, 1140–1156, doi:10.3762/bjnano.10.114

• considered the most extensively studied solid among the diverse transition-metal oxides and transition-metal chalcogenides investigated with that focus over the last decades. However, TiO2 has disadvantages such as limited activity together with a reduced sensitivity to sunlight. Hence, alternative

A Ni(OH)₂ nanopetals network for high-performance supercapacitors synthesized by immersing Ni nanofoam in water

• Donghui Zheng,
• Man Li,
• Yongyan Li,
• Chunling Qin,
• Yichao Wang and
• Zhifeng Wang

Beilstein J. Nanotechnol. 2019, 10, 281–293, doi:10.3762/bjnano.10.27

• between active materials and electrolyte, for which transition metal oxides/hydroxides with multiple valence are used as electrode materials [8][9]. EDLCs hold a high power density and long cycling stability, but their practical application is limited by the low energy density. In comparison, pseudo

• -capacitors possess a higher energy density and are regarded as promising candidates for energy storage systems [10]. Among the various transition metal oxides/hydroxides, Ni(OH)2 is an ideal candidate for pseudo-capacitors due to its unique features such as high theoretical capacity and outstanding redox

Nanostructure-induced performance degradation of WO₃·nH₂O for energy conversion and storage devices

• Zhenyin Hai,
• Mohammad Karbalaei Akbari,
• Zihan Wei,
• Danfeng Cui,
• Chenyang Xue,
• Hongyan Xu,
• Philippe M. Heynderickx,
• Francis Verpoort and
• Serge Zhuiykov

Beilstein J. Nanotechnol. 2018, 9, 2845–2854, doi:10.3762/bjnano.9.265

• layered transition metal oxides. Keywords: 2D layered oxides; interlayer water; van der Waals interaction; WO3·nH2O; Introduction Within the less than 20 years since the successful exfoliation of atomically thin graphene, 2D layered nanomaterials have been contributing greatly to the advances of

• nanoscience and nanotechnology with their exotic properties and versatility of applications [1][2][3][4][5][6][7][8][9][10]. Among all 2D nanomaterials, 2D transition metal oxides (TMOs) are the group with the highest electrochemical activities for energy conversion and storage [11][12][13][14][15]. As the

Cr(VI) remediation from aqueous environment through modified-TiO₂-mediated photocatalytic reduction

• Rashmi Acharya,
• Brundabana Naik and
• Kulamani Parida

Beilstein J. Nanotechnol. 2018, 9, 1448–1470, doi:10.3762/bjnano.9.137

• . This also enhances the light absorption range towards longer wavelengths. The band edge potentials and band gaps of different semiconductor oxides and sulfides are given in Figure 2. Photocatalytic reduction of Cr(VI) over TiO2 modified with simple transition metal oxides under UV irradiation

• Transition metal oxides such as ZnO have been combined with TiO2 to form composite photocatalysts, which are used efficiently for photocatalytic reduction of Cr(VI). ZnO has been recognized as a potential photocatalyst for extensive environmental applications because of its availability and low cost. It also

• reduction of Cr(VI) Two types of transition metal oxides have been combined with TiO2 for photocatalytic reduction of Cr(VI). One type are simple metal oxides with the common formula MOx and the other are mixed metal oxides of general formula MM′Ox, where M and M′ represent transition metal ions and x

Facile synthesis of ZnFe₂O₄ photocatalysts for decolourization of organic dyes under solar irradiation

• Arjun Behera,
• Debasmita Kandi,
• Sanjit Manohar Majhi,
• Satyabadi Martha and
• Kulamani Parida

Beilstein J. Nanotechnol. 2018, 9, 436–446, doi:10.3762/bjnano.9.42

• ]. It is important to develop a suitable environmentally friendly material that can absorb the full range of the solar spectrum for solving energy and environmental challenges. Since last decade, ternary transition metal oxides (TTMOs) have gained tremendous popularity in the field of photocatalysis by

Synthesis and characterization of electrospun molybdenum dioxide–carbon nanofibers as sulfur matrix additives for rechargeable lithium–sulfur battery applications

• Ruiyuan Zhuang,
• Shanshan Yao,
• Maoxiang Jing,
• Xiangqian Shen,
• Jun Xiang,
• Tianbao Li,
• Kesong Xiao and
• Shibiao Qin

Beilstein J. Nanotechnol. 2018, 9, 262–270, doi:10.3762/bjnano.9.28

• . Molybdenum dioxide (MoO2) materials are particularly attractive among the transition-metal oxides due to their high melting point, high chemical stability and low electrical resistivity (190 S cm−1). This material has great potential for applications in several fields such as sensing, catalysis

Systematic control of α-Fe₂O₃ crystal growth direction for improved electrochemical performance of lithium-ion battery anodes

• Nan Shen,
• Miriam Keppeler,
• Barbara Stiaszny,
• Holger Hain,
• Filippo Maglia and
• Madhavi Srinivasan

Beilstein J. Nanotechnol. 2017, 8, 2032–2044, doi:10.3762/bjnano.8.204

• coulombic efficiency, its flat voltage curve and the low operating voltage of 0.1 V vs Li/Li+ it is limited to a lithium storage capacity of only 372 mAh g−1, given a stoichiometry of LiC6 [8]. In 2000, the Tarascon research group brought attention to transition metal oxides as a new class of possible anode

• materials that showed capacities in the range of twice as high as graphite [9], and some of them even show values higher than 1000 mAh g−1 with the interaction with lithium ions [10]. Therefore, transition metal oxides are candidates as new, high-capacity, electrode active materials in next generation LIBs

Graphene functionalised by laser-ablated V₂O₅ for a highly sensitive NH₃ sensor

• Margus Kodu,
• Artjom Berholts,
• Tauno Kahro,
• Mati Kook,
• Peeter Ritslaid,
• Helina Seemen,
• Tea Avarmaa,
• Harry Alles and
• Raivo Jaaniso

Beilstein J. Nanotechnol. 2017, 8, 571–578, doi:10.3762/bjnano.8.61

• precious metal [4] or metal oxide nanoparticles [5]. Also, introduction of suitable defects was shown to have a positive effect on gas adsorption and sensor properties of graphene [6]. Transition metal oxides constitute an important class of catalysts and photosensitizers. Apart from the very first and

In situ formation of reduced graphene oxide structures in ceria by combined sol–gel and solvothermal processing

• Jingxia Yang,
• Johannes Ofner,
• Bernhard Lendl and
• Ulrich Schubert

Beilstein J. Nanotechnol. 2016, 7, 1815–1821, doi:10.3762/bjnano.7.174

• capacity. It is mostly used together with other components, such as noble metals or transition metal oxides, such as NiO or Co3O4, because synergistic effects improve the catalytic properties. Graphene-modified CeO2 greatly enhances the performance in electrochemical devices (supercapacitors, fuel cells or

Improved lithium-ion battery anode capacity with a network of easily fabricated spindle-like carbon nanofibers

• Mengting Liu,
• Wenhe Xie,
• Lili Gu,
• Tianfeng Qin,
• Xiaoyi Hou and
• Deyan He

Beilstein J. Nanotechnol. 2016, 7, 1289–1295, doi:10.3762/bjnano.7.120

• , transition metal oxides are the focus of intensive efforts for LIB anode materials due to their remarkable specific capacity, low cost and environmental compatibility [6][7][8][9][10][11]. Manganese oxide (MnO) is a particularly good choice owing to its high theoretical specific capacity of 755 mAh g−1, low

Metal hydrides: an innovative and challenging conversion reaction anode for lithium-ion batteries

• Luc Aymard,
• Yassine Oumellal and
• Jean-Pierre Bonnet

Beilstein J. Nanotechnol. 2015, 6, 1821–1839, doi:10.3762/bjnano.6.186

• addition to the MgH2 carbon composite The improvement of the sorption kinetics of MgH2 through catalyst addition (i.e., transition metals [37][38] transition metal oxides [39][40][41] and halides [42]) has been widely studied in the literature. Nb2O5 is one of the most efficient catalysts [43] enabling

Quasi-1D physics in metal-organic frameworks: MIL-47(V) from first principles

• Danny E. P. Vanpoucke,
• Jan W. Jaeken,
• Stijn De Baerdemacker,
• Kurt Lejaeghere and
• Veronique Van Speybroeck

Beilstein J. Nanotechnol. 2014, 5, 1738–1748, doi:10.3762/bjnano.5.184

• interesting systems to observe and study exotic and low-dimensional physics [23][24][25][26][27][28][29][30][31][32][33][34][35][36][37]. Transition-metal oxides, on the other hand, have proven to be a rich source of multiferroic materials [38][39][40][41]. Such materials, which combine at least two magnetic

• and/or electronic ordering phenomena, are of great interest for technological applications. MOFs containing transition-metal oxides as nodes are therefore expected to show physically interesting behavior. For example Canepa et al. [36] investigated the MOF-74 frameworks with Fe, Ni and Co at their

Characterization and photocatalytic study of tantalum oxide nanoparticles prepared by the hydrolysis of tantalum oxo-ethoxide Ta₈(μ₃-O)₂(μ-O)₈(μ-OEt)₆(OEt)₁₄

• Subia Ambreen,
• N D Pandey,
• Peter Mayer and
• Ashutosh Pandey

Beilstein J. Nanotechnol. 2014, 5, 1082–1090, doi:10.3762/bjnano.5.121

• properties of metal oxo-alkoxides are decided by the degree of hydrolysis and the nature of the alkyl group. There is a tendency for lower volatility and solubility with higher degrees of hydrolysis and, therefore, oligomerization. Amongst the transition metal oxides, Ta2O5 has attracted growing interest due

Integration of ZnO and CuO nanowires into a thermoelectric module

• Dario Zappa,
• Simone Dalola,
• Guido Faglia,
• Elisabetta Comini,
• Matteo Ferroni,
• Caterina Soldano,
• Vittorio Ferrari and
• Giorgio Sberveglieri

Beilstein J. Nanotechnol. 2014, 5, 927–936, doi:10.3762/bjnano.5.106

• , respectively (being T the temperature). State-of-the-art bulk materials-based thermoelectric generators have been demonstrated to possibly reach energy conversion efficiency values of 5.2% and higher, with materials characterized by a ZT factor approaching a unitary value [3][4]. Transition metal oxides (TMOs