Oxidative fluorination with Selectfluor: A convenient procedure for preparing hypervalent iodine(V) fluorides

• Samuel M. G. Dearman,
• Xiang Li,
• Yang Li,
• Kuldip Singh and
• Alison M. Stuart

Beilstein J. Org. Chem. 2024, 20, 1785–1793, doi:10.3762/bjoc.20.157

• investigate hypervalent iodine(V) fluorides has been limited primarily by their difficult preparation traditionally using harsh fluorinating reagents such as trifluoromethyl hypofluorite and bromine trifluoride. Here, we report a mild and efficient route using Selectfluor to deliver hypervalent iodine(V

• ) fluorides in good isolated yields (72–90%). Stability studies revealed that bicyclic difluoro(aryl)-λ5-iodane 6 was much more stable in acetonitrile-d3 than in chloroform-d1, presumably due to acetonitrile coordinating to the iodine(V) centre and stabilising it via halogen bonding. Keywords: fluorination

• ; fluorobenziodoxoles; halogen bonding; hypervalent iodine; Selectfluor; Introduction An important strategy in the drug discovery process is the incorporation of fluorine into biologically active molecules because fluorine can improve bioactivity and pharmacokinetic properties [1]. Consequently, 22% of all small

Synthesis of polycyclic aromatic quinones by continuous flow electrochemical oxidation: anodic methoxylation of polycyclic aromatic phenols (PAPs)

• Hiwot M. Tiruye,
• Solon Economopoulos and
• Kåre B. Jørgensen

Beilstein J. Org. Chem. 2024, 20, 1746–1757, doi:10.3762/bjoc.20.153

• radical (potassium nitrosodisulfonate) [13] or catalytic systems like methyltrioxorhenium(VII) (MeReO3) [14] and 2-iodobenzenesulfonic acids (IBS)/Oxone® [15] led to either p-quinones or o-quinones, depending on the substituents in the para-position to the hydroxy group. Recently, hypervalent iodine

Syntheses and medicinal chemistry of spiro heterocyclic steroids

• Laura L. Romero-Hernández,
• Ana Isabel Ahuja-Casarín,
• Penélope Merino-Montiel,
• Sara Montiel-Smith,
• José Luis Vega-Báez and
• Jesús Sandoval-Ramírez

Beilstein J. Org. Chem. 2024, 20, 1713–1745, doi:10.3762/bjoc.20.152

• protecting group yielded the corresponding hydroxyalkynyl derivative 4. Subsequent Lindlar reduction resulted in the (Z)-alkene and a chemoselective tosylation of the primary alcohol led to the formation of tosylate 5. This intermediate underwent a stereospecific 4-exo cyclization upon exposure to iodine

Oxidation of benzylic alcohols to carbonyls using N-heterocyclic stabilized λ³-iodanes

• Thomas J. Kuczmera,
• Pim Puylaert and
• Boris J. Nachtsheim

Beilstein J. Org. Chem. 2024, 20, 1677–1683, doi:10.3762/bjoc.20.149

• )iodane is proposed as the reactive intermediate. Keywords: alcohol oxidation; hypervalent iodine; N-heterocycles; Introduction The oxidation of alcohols to aldehydes and ketones is an essential transformation in organic chemistry [1][2]. Generating aldehydes is particularly challenging as they are

• oxidants in combination with transition-metal catalysts. Metal-free methods employ chlorodimethylsulfonium compounds as the reactive species and have gained great popularity under the name Swern oxidation or the Corey–Kim oxidation [11]. Hypervalent iodine compounds have also been studied and are well

• -iodanes have drawbacks, in particular low solubility and moisture sensitivity [11]. Hypervalent iodine compounds in a lower oxidation state (λ3-iodanes), such as iodosobenzene (PhIO)n or phenyliodine(III) diacetate (PIDA) have been reported in alcohol oxidations but they often result in overoxidation to

Divergent role of PIDA and PIFA in the AlX₃ (X = Cl, Br) halogenation of 2-naphthol: a mechanistic study

• Kevin A. Juárez-Ornelas,
• Manuel Solís-Hernández,
• Pedro Navarro-Santos,
• J. Oscar C. Jiménez-Halla and
• César R. Solorio-Alvarado

Beilstein J. Org. Chem. 2024, 20, 1580–1589, doi:10.3762/bjoc.20.141

• halogenation via PhIX2. Keywords: aromatic bromination; aromatic chlorination; density functional theory (DFT); hypervalent iodine; iodine(III); Introduction Hypervalent iodine(III) reagents have gained attention as strong oxidants with a low toxicity [1][2][3][4][5][6][7][8] and due to the ability to mimic

• reactivity [9] usually associated with transition metals [10][11]. Iodine(III) compounds have been used for the formation of different bond types, such as C–C [12][13], C–O [14][15], C–N [16], C–S [17], C–CN [18], C–F [19][20][21], C–I [22][23], C–NO2 [24][25] and, in the context of this work, C–X (X = Cl

• , Br) [26][27][28][29][30][31]. So far, different protocols for the halogenation of arenes using iodine(III) reagents have been described, mainly using (diacetoxyiodo)benzene (PIDA)/TMSCl, PIDA/TMSBr [32], and [bis(trifluoroacetoxy)iodo]benzene (PIFA)/TMSBr [33]. We have recently developed a new

Benzylic C(sp³)–H fluorination

• Alexander P. Atkins,
• Alice C. Dean and
• Alastair J. J. Lennox

Beilstein J. Org. Chem. 2024, 20, 1527–1547, doi:10.3762/bjoc.20.137

• iodine as a super-stoichiometric oxidant. The catalyst system has precedent for also facilitating oxygenation reactions [82], which was observed as a competing pathway under these conditions. The catalytic cycle proposed by the authors begins at resting state I (Figure 31), which is generated in situ and

• is subsequently oxidised to Mn(V)-oxo species II by hypervalent iodine oxidant PhIO. This can perform a HAT from the benzylic substrate, in turn generating a benzylic radical and Mn(IV)-hydroxy species III. Ligand exchange with the fluoride source affords complex IV, which performs FAT with the

Tetrabutylammonium iodide-catalyzed oxidative α-azidation of β-ketocarbonyl compounds using sodium azide

• Christopher Mairhofer,
• David Naderer and
• Mario Waser

Beilstein J. Org. Chem. 2024, 20, 1510–1517, doi:10.3762/bjoc.20.135

• addition, the recent years have seen remarkable progress in utilizing electrophilic azide-transfer reagents, i.e., hypervalent iodine-based compounds, for (asymmetric) α-azidations [16][17][18][19][20][21][22][23]. Besides these valuable approaches, which either require appropriate pre-functionalization of

• mechanistic scenario. Application scope. Proof-of-concept for the analogous oxidative α-nitration. Optimization of the α-azidation of β-ketoester 1aa. Control experiments using different hypervalent iodine speciesa. Supporting Information Supporting Information File 24: Full experimental and analytical

Synthesis of 4-functionalized pyrazoles via oxidative thio- or selenocyanation mediated by PhICl₂ and NH₄SCN/KSeCN

• Jialiang Wu,
• Haofeng Shi,
• Xuemin Li,
• Jiaxin He,
• Chen Zhang,
• Fengxia Sun and
• Yunfei Du

Beilstein J. Org. Chem. 2024, 20, 1453–1461, doi:10.3762/bjoc.20.128

• Engineering, Hebei University of Science and Technology, Shijiazhuang 050018, China 10.3762/bjoc.20.128 Abstract A series of 4-thio/seleno-cyanated pyrazoles was conveniently synthesized from 4-unsubstituted pyrazoles using NH4SCN/KSeCN as thio/selenocyanogen sources and PhICl2 as the hypervalent iodine

• to give (SeCN)2 [60]. Then, one selenium atom of (SeCN)2 nucleophilically attacks the iodine center in PhICl2 to generate intermediate A, which was further transformed into intermediate B by release of one molecule of iodobenzene. Next, the nucleophilic attack of chloride anion to the bivalent

• , we have accomplished the synthesis of a series of C-4 thio/selenocyanated pyrazoles via a hypervalent iodine-mediated electrophilic thio/selenocyanation approach under mild reaction conditions. Furthermore, the obtained S/SeCN-containing pyrazoles can be converted to S/SeCF3- and S/SeMe-containing

Predicting bond dissociation energies of cyclic hypervalent halogen reagents using DFT calculations and graph attention network model

• Yingbo Shao,
• Zhiyuan Ren,
• Zhihui Han,
• Li Chen,
• Yao Li and
• Xiao-Song Xue

Beilstein J. Org. Chem. 2024, 20, 1444–1452, doi:10.3762/bjoc.20.127

• , University of Chinese Academy of Sciences, Shanghai 200032, P. R. China, School of Chemistry and Material Sciences, Hangzhou Institute for Advanced Study, University of Chinese Academy of Sciences, Hangzhou 310024, P. R. China 10.3762/bjoc.20.127 Abstract Although hypervalent iodine(III) reagents have

• ; machine learning; Introduction Hypervalent iodine reagents are increasingly gaining attention in the fields of organic synthesis and catalysis due to their environmental benefits, accessibility, and cost-efficiency [1][2][3][4][5][6][7][8][9][10][11]. Over the last three decades, a series of cyclic

• hypervalent iodine(III) reagents has been developed [12][13][14][15][16][17] (Figure 1), including the well-known Zhdankin reagents [13] and Togni reagents [14]. These reagents are popularly used as electrophilic group transfer reagents [18][19] in a variety of reactions, such as C–H functionalization [20][21

A comparison of structure, bonding and non-covalent interactions of aryl halide and diarylhalonium halogen-bond donors

• Nicole Javaly,
• Theresa M. McCormick and
• David R. Stuart

Beilstein J. Org. Chem. 2024, 20, 1428–1435, doi:10.3762/bjoc.20.125

• that, for a set of monovalent iodine-based halogen-bond donors, a linear combination of σ-hole and σ* energy provides a superior predictive ability than σ-hole alone [26]. In this work we compare a set of both monovalent and nominally hypervalent halogen-bond donors in which the central halogen atom is

• engage in halogen-bonding interactions [29][30]. In this work, a series of halogen-bond donor molecules and their halogen bond complexes with chloride anion were optimized at the M062x/6-311+G(d) level of theory [31] with def2-tzvpp used for iodine and astatine, and with SMD solvation in tetrahydrofuran

• (THF) incorporating Huber, Truhlar, and Cramer’s correction for bromine and iodine [32] using Gaussian 09 [33]. Our prior work on the orbital analysis of diarylhalonium salts [21], showed good agreement between crystal structure data and energy-minimized structures at the B3LYP/cc-pvtz level with def2

Hypervalent iodine-catalyzed amide and alkene coupling enabled by lithium salt activation

• Akanksha Chhikara,
• Fan Wu,
• Navdeep Kaur,
• Prabagar Baskaran,
• Alex M. Nguyen,
• Zhichang Yin,
• Anthony H. Pham and
• Wei Li

Beilstein J. Org. Chem. 2024, 20, 1405–1411, doi:10.3762/bjoc.20.122

• .20.122 Abstract Hypervalent iodine catalysis has been widely utilized in olefin functionalization reactions. Intermolecularly, the regioselective addition of two distinct nucleophiles across the olefin is a challenging process in hypervalent iodine catalysis. We introduce here a unique strategy using

• simple lithium salts for hypervalent iodine catalyst activation. The activated hypervalent iodine catalyst allows the intermolecular coupling of soft nucleophiles such as amides onto electronically activated olefins with high regioselectivity. Keywords: amide coupling; hypervalent iodine catalysis

• ; lithium salt activation; olefin oxyamination; oxazoline; Introduction Hypervalent iodine(III) reagents, also known as λ3–iodanes, have been well established and used in organic synthesis for the past decades [1][2][3][4][5]. The pioneering works of Fuchigami and Fugita, Ochiai, Kita, and later the

Oxidative hydrolysis of aliphatic bromoalkenes: scope study and reactivity insights

• Amol P. Jadhav and
• Claude Y. Legault

Beilstein J. Org. Chem. 2024, 20, 1286–1291, doi:10.3762/bjoc.20.111

• utilizing a hypervalent iodine-catalyzed oxidative hydrolysis reaction. This catalytic process provides both symmetrical and unsymmetrical dialkyl bromoketones with moderate yields across a broad range of bromoalkene substrates. Our studies also reveal the formation of Ritter-type side products by an

• alternative reaction pathway. Keywords: bromoalkenes; bromoketones; hypervalent iodine; oxidative hydrolysis; Ritter-type; Introduction Organic synthesis heavily relies on oxidative transformations to facilitate chemical reactions. One popular method for achieving these transformations is using redox-active

• metals, inspired by Nature's metalloproteins. However, using toxic and expensive metals is not always practical, making alternative oxidative methodologies more appealing. Enter hypervalent iodine reagents – a leading metal-free choice for oxidation reactions. These robust and low-toxicity reagents have

Domino reactions of chromones with activated carbonyl compounds

• Peter Langer

Beilstein J. Org. Chem. 2024, 20, 1256–1269, doi:10.3762/bjoc.20.108

• chromones, presumably due to the electron-donating character of the methoxy group and the lower electrophilicity of the chromone. But this trend was also not general. Similar yields were obtained for ketones (R3 = Me, Ph) or esters (R3 = OMe). Treatment of 2-(salicyloyl)furan 35a with iodine in the presence

• these products can be explained, similarly to the formation of 35a–f, by generation of intermediate Y which afforded iodonium salt Z upon addition of iodine. Cyclization by attack of the salicylate hydroxy group to carbon C5 gave intermediate AB. Hydrolysis of the iodide upon aqueous work-up to give an

Competing electrophilic substitution and oxidative polymerization of arylamines with selenium dioxide

• Vishnu Selladurai and
• Selvakumar Karuthapandi

Beilstein J. Org. Chem. 2024, 20, 1221–1235, doi:10.3762/bjoc.20.105

• ]. This reaction comprises four main steps: (i) iodide-mediated aryl transfer from boronic acid to selenium dioxide, (ii) reduction of arylseleninic acid to diaryl diselenide, (iii) oxidation of diaryl diselenide to aryl selenenyl iodide with iodine, and (iv) electrophilic substitution of aniline

Bismuth(III) triflate: an economical and environmentally friendly catalyst for the Nazarov reaction

• Manoel T. Rodrigues Jr.,
• Aline S. B. de Oliveira,
• Ralph C. Gomes,
• Amanda Soares Hirata,
• Lucas A. Zeoly,
• Hugo Santos,
• João Arantes,
• Catarina Sofia Mateus Reis-Silva,
• João Agostinho Machado-Neto,
• Leticia Veras Costa-Lotufo and
• Fernando Coelho

Beilstein J. Org. Chem. 2024, 20, 1167–1178, doi:10.3762/bjoc.20.99

• first asymmetric catalytic Nazarov reaction [32]. In recent years, several strategies were reported employing different Lewis acids, such as, AuCl3/AgSbF6, Cu(II), In(OTf)3, Ir(III), Al(III), Sc(OTf)3/LiClO4, In(OTf)3/diphenylphosphoric acid (DPP), Fe(OTf)3/(CF3)2PhB(OH)2, iodine [33][34][35][36][37][38

Light on the sustainable preparation of aryl-cored dibromides

• Fabrizio Roncaglia,
• Alberto Ughetti,
• Nicola Porcelli,
• Biagio Anderlini,
• Andrea Severini and
• Luca Rigamonti

Beilstein J. Org. Chem. 2024, 20, 1076–1087, doi:10.3762/bjoc.20.95

• follows a different mechanism, producing the ortho and para-bromoarenes through Ar-SE, that involves cationic intermediates. In this case, a catalytic amount of iodine [21][22] or FeCl3 [23] is added to enhance the electrophilicity of bromine. While widely employed and capable of producing reliable

• ]. This method found prevalent application in the bromination of side-chain positions (right side of Figure 2) [26][27]. However, the addition of molecular iodine in catalytic amounts makes it suitable for aromatic bromination “in the dark” (left side of Figure 2). This gives rise to a radical-initiated

• Ar-SE mechanism, which is reported to proceed through the generation of a mixed molecular halogen [28]. As an alternative to iodine, the trityl cation [29] is reported too. Additional benefits of the method include its ability to work in neutral conditions, and the potential quantitative

Auxiliary strategy for the general and practical synthesis of diaryliodonium(III) salts with diverse organocarboxylate counterions

• Naoki Miyamoto,
• Daichi Koseki,
• Kohei Sumida,
• Elghareeb E. Elboray,
• Naoko Takenaga,
• Ravi Kumar and
• Toshifumi Dohi

Beilstein J. Org. Chem. 2024, 20, 1020–1028, doi:10.3762/bjoc.20.90

• wide range of substituents on (hetero)aryl iodine(III) compounds, including electron-rich, electron-poor, sterically congested, and acid-labile groups, as well as a broad range of aliphatic and aromatic carboxylic acids for the synthesis of diverse aryl(TMP)iodonium(III) carboxylates in high yields

• . This method allows for the hybridization of complex bioactive and fluorescent-labeled carboxylic acids with diaryliodonium(III) salts. Keywords: auxiliary ligand; diaryliodonium(III) salts; hybridization; hypervalent iodine; organocarboxylates; Introduction Hypervalent iodine compounds are an

• trifluoroacetic acid, followed by coupling with 1,3,5-trimethoxybenzene [18] (Scheme 1A). This process demonstrated tolerance for a wide range of electron-rich and electron-deficient (hetero)aryl iodine(III) compounds. Wirth and colleagues reported the flow synthesis of diaryliodonium(III) trifluoroacetates using

Carbonylative synthesis and functionalization of indoles

• Alex De Salvo,
• Raffaella Mancuso and
• Xiao-Feng Wu

Beilstein J. Org. Chem. 2024, 20, 973–1000, doi:10.3762/bjoc.20.87

• , the Li’s group and Zeng and Alper developed two different methods for carrying out a direct carbonylation of indoles with alkynes. Li’s group reported the direct Sonogashira carbonylation coupling reaction of indoles and alkynes catalyzed by Pd/CuI in the presence of iodine as oxidant [71]. The

Three-component N-alkenylation of azoles with alkynes and iodine(III) electrophile: synthesis of multisubstituted N-vinylazoles

• Jun Kikuchi,
• Roi Nakajima and
• Naohiko Yoshikai

Beilstein J. Org. Chem. 2024, 20, 891–897, doi:10.3762/bjoc.20.79

• Jun Kikuchi Roi Nakajima Naohiko Yoshikai Graduate School of Pharmaceutical Sciences, Tohoku University, 6-3 Aoba, Aramaki, Aoba-ku, Sendai 980-8578, Japan 10.3762/bjoc.20.79 Abstract A stereoselective N-alkenylation of azoles with alkynes and iodine(III) electrophile is reported. The reaction

• group in the product can be leveraged as a versatile synthetic handle, allowing for the preparation of hitherto inaccessible types of densely functionalized N-vinylazoles. Keywords: alkynes; azoles; cross-coupling; hypervalent iodine; Introduction N-Functionalized azoles are prevalent in bioactive

• reaction of azoles with alkynes and iodine(III) electrophile, benziodoxole triflate (BXT, 1; Scheme 1c). Displaying exclusive trans-selectivity, the reaction tolerates a broad range of azoles, including pyrazole, 1,2,3-triazole, tetrazole, indazole, and benzotriazole, with internal alkynes as coupling

(Bio)isosteres of ortho- and meta-substituted benzenes

• H. Erik Diepers and
• Johannes C. L. Walker

Beilstein J. Org. Chem. 2024, 20, 859–890, doi:10.3762/bjoc.20.78

• -cubanes (Scheme 9B) [51]. Partial deprotection of diester 88 led to acid 89 as a key intermediate and in situ activation of the acid as the hypervalent iodine complex enabled a photoredox decarboxylative amination to 1,2-cubane 90. Alternatively, conversion of the acid moiety of 89 to redox active esters

• [1.1.1]propellanes (Scheme 13B) [27]. These new syntheses increased the overall yield of the [3.1.1]propellane synthesis from Gassman’s original 6% to 23% (Uchiyama) and up to 35% (Anderson) in 5 steps. Iodine-substituted 1,5-BCHeps 134a–g were shown to be accessible from [3.1.1]propellane via

• synthesis of some 1,5-BCHeps, including 134b, was also possible on mmol scale. Through derivatization of iodine-substituted 1,5-BCHeps 134f and 134g, an even larger number of 1,5-BCHeps were accessed (Scheme 14B) [27][47]. For example, lithium–halogen exchange was used to prepare acids 135f–g and boronic

SOMOphilic alkyne vs radical-polar crossover approaches: The full story of the azido-alkynylation of alkenes

• Julien Borrel and
• Jerome Waser

Beilstein J. Org. Chem. 2024, 20, 701–713, doi:10.3762/bjoc.20.64

• high yield (72%) of the homopropargylic azide was reached. Full insights are given about the factors that were essential for the success of the optimization process. Keywords: alkyne; azide; hypervalent iodine; photoredox; trifluoroborate salt; Introduction Homopropargylic azides are important

• iodine reagents [15][16]. Azidobenziodoxolone, also known as Zhdankin reagent, has often been used under thermal or photochemical conditions to generate the desired azide radical in a controlled fashion. However, recent safety issues arising from the shock and impact sensitivity of the compound led to

• , entry 10). The addition of DABCO [18] or TBAI [50], two additives known to activate azidobenziodoxolone (ABX), afforded complex mixtures with no trace of 4a (Table 1, entry 11). Acids or fluorinated alcohols were tested to activate the different hypervalent iodine reagents. While AcOH, TFA and TFE had

Switchable molecular tweezers: design and applications

• Pablo Msellem,
• Maksym Dekthiarenko,
• Nihal Hadj Seyd and
• Guillaume Vives

Beilstein J. Org. Chem. 2024, 20, 504–539, doi:10.3762/bjoc.20.45

• crown ether. The authors reported switchable tweezers bearing metalloporphyrin arms that can be switched by the addition of K+ and Na+ cations. The cation brings the porphyrins together and causes some dynamic fluorescence quenching from the iodine counter anion. The authors attributed the more

(E,Z)-1,1,1,4,4,4-Hexafluorobut-2-enes: hydrofluoroolefins halogenation/dehydrohalogenation cascade to reach new fluorinated allene

• Nataliia V. Kirij,
• Andrey A. Filatov,
• Yurii L. Yagupolskii,
• Sheng Peng and
• Lee Sprague

Beilstein J. Org. Chem. 2024, 20, 452–459, doi:10.3762/bjoc.20.40

• presence of SbCl5, AlCl3, Bu4NOH/MeOH and under UV irradiation. We found that under UV irradiation for several hours, the (E)-isomer 3a completely transformed into (Z)-isomer 3b in quantitative yield (Scheme 3). Next, our attention was directed toward the reaction of (E)- and (Z)-butenes 1a,b with iodine

• reactivity we performed the reaction with iodine. All experiments were carried out in THF, N-methylpyrrolidone and sulfolane with iodine in the presence of a source of fluoride ion. The best result was observed when the reaction was carried out in dry sulfolane with a two-fold excess of iodine and 1.5-fold

• important synthons, which are widely used in agrochemicals, pharmaceuticals and other fields [24][25][26]. Fluoroorganic lithium and Grignard reagents have been obtained by the metalation reactions of organofluorine compounds containing bromine and iodine atoms with alkyllithium and Grignard reagents

Mechanisms for radical reactions initiating from N-hydroxyphthalimide esters

• Carlos R. Azpilcueta-Nicolas and
• Jean-Philip Lumb

Beilstein J. Org. Chem. 2024, 20, 346–378, doi:10.3762/bjoc.20.35

• radical recombination between C(sp3) radical 152 and the corresponding iodine-centered radical which provides iodination product 153 (Scheme 31B). It is worth noting that the iodination product is formed exclusively when using acetone as the solvent (see compound 154 in scheme C) whereas in DMF a

Comparison of glycosyl donors: a supramer approach

• Anna V. Orlova,
• Nelly N. Malysheva,
• Maria V. Panova,
• Nikita M. Podvalnyy,
• Michael G. Medvedev and
• Leonid O. Kononov

Beilstein J. Org. Chem. 2024, 20, 181–192, doi:10.3762/bjoc.20.18

• glycosyl donor) was added under argon followed by neat TfOH (2 μL, 0.02 mmol) to give a persistent iodine color as described previously [36]. The reaction mixture was stirred under argon at −40 °C until complete consumption of the starting thioglycoside (TLC monitoring, Rf 0.68 (1), Rf 0.57 (2), benzene